David Alexander Anderson
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
David Alexander Anderson has a total of 44 co-authors. Here are the top co-authors by number of shared publications:
- Georg Raithel
University of Michigan
13 shared publications Georg Raithel
Rydberg Technologies Inc 48103 Ann Arbor MI
12 shared publicationsChristopher L. Holloway
7 shared publicationsJoshua A. Gordon
National Institute of Standards and Technology (NIST) 1 , Boulder, Colorado 80305, USA
5 shared publicationsStephanie A. Miller
University of Michigan, Department of Physics, Ann Arbor, USA
5 shared publicationsAndrew Schwarzkopf
University of Michigan, Department of Physics, Ann Arbor, USA
4 shared publications
Latest Publications
- 1 September 2026
- Published by American Vacuum Society in AVS Quantum Science
- Vol. 8 (3)
Non-invasive measurements of plasma electric fields using Rydberg electromagnetically induced transparency
Measurements of plasma electric fields are essential to the advancement of plasma science and applications. Performing non-invasive in situ measurements of plasma fields on sub-millimeter length scales with high sensitivity over a large range of field magnitude remains an outstanding challenge. We introduce and demonstrate a method for plasma electric field measurement that employs electromagnetically induced transparency as a high-resolution quantum-optical probe for the Stark energy level shifts of Rydberg atoms embedded in a plasma and serving as highly sensitive field sensors. The method is applied in diagnostics of plasmas generated by photo-excitation of a cesium vapor. The plasma electric fields are extracted from spatially resolved measurements of field-induced lineshape changes and shifts of Rydberg resonances in rubidium tracer atoms. Measurement capabilities over a range of plasma densities and temperatures are exploited to characterize plasmas in applied magnetic fields and to image electric-field distributions in cyclotron-heated plasmas. Our results pave the way toward further applications of Rydberg-atom-based field sensors to diagnostics and monitoring of electric fields due to plasmas.
- 1 September 2026
- Published by American Vacuum Society in AVS Quantum Science
- Vol. 8 (3)
Non-invasive measurements of plasma electric fields using Rydberg electromagnetically induced transparency
Measurements of plasma electric fields are essential to the advancement of plasma science and applications. Performing non-invasive in situ measurements of plasma fields on sub-millimeter length scales with high sensitivity over a large range of field magnitude remains an outstanding challenge. We introduce and demonstrate a method for plasma electric field measurement that employs electromagnetically induced transparency as a high-resolution quantum-optical probe for the Stark energy level shifts of Rydberg atoms embedded in a plasma and serving as highly sensitive field sensors. The method is applied in diagnostics of plasmas generated by photo-excitation of a cesium vapor. The plasma electric fields are extracted from spatially resolved measurements of field-induced lineshape changes and shifts of Rydberg resonances in rubidium tracer atoms. Measurement capabilities over a range of plasma densities and temperatures are exploited to characterize plasmas in applied magnetic fields and to image electric-field distributions in cyclotron-heated plasmas. Our results pave the way toward further applications of Rydberg-atom-based field sensors to diagnostics and monitoring of electric fields due to plasmas.
- Open Access
- 5 August 2026
- Published by American Physical Society (APS) in APS Open Science
- Vol. 1, 000083
Nonlinearities in atomic radio receivers: Harmonic and intermodulation distortion
Rydberg sensors offer a unique approach to radio-frequency (rf) detection, leveraging the high sensitivity and quantum properties of highly excited atomic states to achieve performance levels beyond classical technologies. Nonlinear responses and distortion behavior in Rydberg atom receivers are critical to evaluating and establishing performance metrics and capabilities such as spur-free dynamic range and tolerance to unwanted interfering signals. We report here on the measurement and characterization of nonlinear behavior and spurious response of a Rydberg atomic heterodyne receiver. Single-tone and two-tone testing procedures are developed and implemented for measurement of harmonic and intermodulation distortion in Rydberg atomic receivers based on multiphoton Rydberg spectroscopy and radio-frequency heterodyne signal detection and demodulation in an atomic vapor. For a predetermined set of atomic receiver parameters and rf carrier wave in the super high frequency band near-resonant to a cesium Rydberg transition, we measure and characterize atomic receiver selectivity, bandwidth, roll-off, compression point (P1dB), second-order (IP2) and third-order (IP3) intercepts, and spur-free dynamic range. Receiver intermodulation distortion is characterized for the case of an interfering signal wave applied at two frequency offsets relative to the near-resonant reference local oscillator, Δ F / F = 10 − 4 at 6 dB and 10 − 6 at 22 dB single-tone bandwidths, respectively. We observe that under suitable operating conditions the atomic receiver can exhibit a suppression of harmonic and intermodulation distortion relative to that of classical receiver mixer amplifiers.
- 5 August 2026
- Published by American Physical Society (APS) in APS Open Science
- Vol. 1, 000083
Open AccessNonlinearities in atomic radio receivers: Harmonic and intermodulation distortion
Rydberg sensors offer a unique approach to radio-frequency (rf) detection, leveraging the high sensitivity and quantum properties of highly excited atomic states to achieve performance levels beyond classical technologies. Nonlinear responses and distortion behavior in Rydberg atom receivers are critical to evaluating and establishing performance metrics and capabilities such as spur-free dynamic range and tolerance to unwanted interfering signals. We report here on the measurement and characterization of nonlinear behavior and spurious response of a Rydberg atomic heterodyne receiver. Single-tone and two-tone testing procedures are developed and implemented for measurement of harmonic and intermodulation distortion in Rydberg atomic receivers based on multiphoton Rydberg spectroscopy and radio-frequency heterodyne signal detection and demodulation in an atomic vapor. For a predetermined set of atomic receiver parameters and rf carrier wave in the super high frequency band near-resonant to a cesium Rydberg transition, we measure and characterize atomic receiver selectivity, bandwidth, roll-off, compression point (P1dB), second-order (IP2) and third-order (IP3) intercepts, and spur-free dynamic range. Receiver intermodulation distortion is characterized for the case of an interfering signal wave applied at two frequency offsets relative to the near-resonant reference local oscillator, Δ F / F = 10 − 4 at 6 dB and 10 − 6 at 22 dB single-tone bandwidths, respectively. We observe that under suitable operating conditions the atomic receiver can exhibit a suppression of harmonic and intermodulation distortion relative to that of classical receiver mixer amplifiers.
- Open Access
- 7 May 2024
- Published by American Physical Society (APS) in Physical Review Research
- Vol. 6 (2) , 023138
High-angular-momentum Rydberg states in a room-temperature vapor cell for dc electric-field sensing
We prepare and analyze Rydberg states with orbital quantum numbers using three-optical-photon electromagnetically induced transparency (EIT) and radio frequency (rf) dressing, and employ the high- states in electric-field sensing. Rubidium-85 atoms in a room-temperature vapor cell are first promoted into the state via Rydberg-EIT with three infrared laser beams. Two rf dressing fields then (near-)resonantly couple the , and Rydberg states. The dependence of the rf-dressed Rydberg-state level structure on rf powers, rf and laser frequencies is characterized using EIT. Furthermore, we discuss the principles of dc-electric-field sensing using high- Rydberg states and experimentally demonstrate the method using test electric fields of V/m induced via photo-illumination of the vapor-cell wall. We measure the highly nonlinear dependence of the dc-electric-field strength on the power of the photo-illumination laser. Numerical calculations, which reproduce our experimental observations well, elucidate the underlying physics. Our paper is relevant to high-precision spectroscopy of high- Rydberg states, Rydberg-atom-based electric-field sensing, and plasma electric-field diagnostics.- 7 May 2024
- Published by American Physical Society (APS) in Physical Review Research
- Vol. 6 (2) , 023138
Open AccessHigh-angular-momentum Rydberg states in a room-temperature vapor cell for dc electric-field sensing
We prepare and analyze Rydberg states with orbital quantum numbers using three-optical-photon electromagnetically induced transparency (EIT) and radio frequency (rf) dressing, and employ the high- states in electric-field sensing. Rubidium-85 atoms in a room-temperature vapor cell are first promoted into the state via Rydberg-EIT with three infrared laser beams. Two rf dressing fields then (near-)resonantly couple the , and Rydberg states. The dependence of the rf-dressed Rydberg-state level structure on rf powers, rf and laser frequencies is characterized using EIT. Furthermore, we discuss the principles of dc-electric-field sensing using high- Rydberg states and experimentally demonstrate the method using test electric fields of V/m induced via photo-illumination of the vapor-cell wall. We measure the highly nonlinear dependence of the dc-electric-field strength on the power of the photo-illumination laser. Numerical calculations, which reproduce our experimental observations well, elucidate the underlying physics. Our paper is relevant to high-precision spectroscopy of high- Rydberg states, Rydberg-atom-based electric-field sensing, and plasma electric-field diagnostics. - Open Access
- 5 April 2024
- Published by American Vacuum Society in AVS Quantum Science
- Vol. 6 (2)
A millimeter-wave atomic receiver
Rydberg quantum sensors are sensitive to radio-frequency fields across an ultra-wide frequency range spanning megahertz to terahertz electromagnetic waves resonant with Rydberg atom dipole transitions. Here, we demonstrate an atomic millimeter-wave heterodyne receiver employing continuous-wave lasers stabilized to an optical frequency comb. We characterize the atomic receiver in the W-band at a signal frequency of f = 95.992 512 GHz and demonstrate a sensitivity of 7.9 μV/m/Hz with a linear dynamic range in power greater than 70 dB. We develop frequency selectivity metrics for atomic receivers and demonstrate their use in our millimeter-wave receiver, including signal rejection levels at signal frequency offsets Δf/f = 10−4, 10−5, and 10−6; 3, 6, 9, and 12-dB bandwidths; filter roll-off; and shape factor analysis. Our work represents an important advance toward future studies and applications of atomic receiver science and technology in weak millimeter-wave and high-frequency signal detection.
- 5 April 2024
- Published by American Vacuum Society in AVS Quantum Science
- Vol. 6 (2)
Open AccessA millimeter-wave atomic receiver
Rydberg quantum sensors are sensitive to radio-frequency fields across an ultra-wide frequency range spanning megahertz to terahertz electromagnetic waves resonant with Rydberg atom dipole transitions. Here, we demonstrate an atomic millimeter-wave heterodyne receiver employing continuous-wave lasers stabilized to an optical frequency comb. We characterize the atomic receiver in the W-band at a signal frequency of f = 95.992 512 GHz and demonstrate a sensitivity of 7.9 μV/m/Hz with a linear dynamic range in power greater than 70 dB. We develop frequency selectivity metrics for atomic receivers and demonstrate their use in our millimeter-wave receiver, including signal rejection levels at signal frequency offsets Δf/f = 10−4, 10−5, and 10−6; 3, 6, 9, and 12-dB bandwidths; filter roll-off; and shape factor analysis. Our work represents an important advance toward future studies and applications of atomic receiver science and technology in weak millimeter-wave and high-frequency signal detection.
- 11 April 2022
- Published by American Physical Society (APS) in Physical Review Applied
- Vol. 17 (4) , 044020
Optical Radio-Frequency Phase Measurement With an Internal-State Rydberg Atom Interferometer
We realize and model an internal-state Rydberg atom interferometer for measurement of phase and intensity of radio-frequency (rf) electromagnetic waves. A phase reference is supplied to the atoms via a modulated laser beam, enabling atomic measurement of the rf wave’s phase without a rf reference wave. The rf and optical fields give rise to closed interferometric loops within the atoms’ internal Hilbert space. In our experiment, we construct interferometric loops in the state space of cesium and employ them to measure phase and intensity of a 5-GHz rf wave in a room-temperature vapor cell. Electromagnetically induced transparency on the to transition serves as an all-optical interferometer probe. The rf phase is measured over a range of , and a sensitivity of 2 mrad is achieved. Measurements of rf phase and amplitude at submillimeter optical spatial resolution are demonstrated.- 11 April 2022
- Published by American Physical Society (APS) in Physical Review Applied
- Vol. 17 (4) , 044020
Optical Radio-Frequency Phase Measurement With an Internal-State Rydberg Atom Interferometer
We realize and model an internal-state Rydberg atom interferometer for measurement of phase and intensity of radio-frequency (rf) electromagnetic waves. A phase reference is supplied to the atoms via a modulated laser beam, enabling atomic measurement of the rf wave’s phase without a rf reference wave. The rf and optical fields give rise to closed interferometric loops within the atoms’ internal Hilbert space. In our experiment, we construct interferometric loops in the state space of cesium and employ them to measure phase and intensity of a 5-GHz rf wave in a room-temperature vapor cell. Electromagnetically induced transparency on the to transition serves as an all-optical interferometer probe. The rf phase is measured over a range of , and a sensitivity of 2 mrad is achieved. Measurements of rf phase and amplitude at submillimeter optical spatial resolution are demonstrated.- Top Cited Papers
- 25 February 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 69 (9) , 5931-5941
A Self-Calibrated SI-Traceable Rydberg Atom-Based Radio Frequency Electric Field Probe and Measurement Instrument
We present a portable Rydberg-atom-based radio frequency (RF) electric ( $E$ ) field measurement instrument (Rydberg field measurement system or RFMS). The RFMS comprises an atomic RF field probe (RFP) connected by a ruggedized fiber-optic patch cord to a portable mainframe control unit. The unit includes a software interface providing self-calibrated SI-traceable RF measurement and analysis, including real-time field and measurement uncertainty readout and spectral RF waveform visualization. We characterize the RFP and measure polar field and polarization patterns along primary axes of the RFP at 12.6 GHz, obtained by rotations of the RFP in the far-field of a standard gain horn antenna. Field pattern measurements at 2.5 GHz are also presented. The measured field patterns are in good agreement with finite-element simulations of the RFP, establishing that the atom-based RF $E$ -field probe is well-suited for SI-traceable RF measurements over multiple bands. A one-time calibration procedure and an uncertainty analysis are introduced and implemented, as required for practical atomic probe designs to realize absolute-standard SI-traceable measurement capability. This includes uncertainty contributions from the atomic-spectroscopy measurement method and analysis and from the material, geometry, and hardware design. Simultaneous RF field and polarization measurements are demonstrated. RF waveform measurement is demonstrated using example pulsed and modulated RF signals.
- 25 February 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 69 (9) , 5931-5941
Top Cited PapersA Self-Calibrated SI-Traceable Rydberg Atom-Based Radio Frequency Electric Field Probe and Measurement Instrument
We present a portable Rydberg-atom-based radio frequency (RF) electric ( $E$ ) field measurement instrument (Rydberg field measurement system or RFMS). The RFMS comprises an atomic RF field probe (RFP) connected by a ruggedized fiber-optic patch cord to a portable mainframe control unit. The unit includes a software interface providing self-calibrated SI-traceable RF measurement and analysis, including real-time field and measurement uncertainty readout and spectral RF waveform visualization. We characterize the RFP and measure polar field and polarization patterns along primary axes of the RFP at 12.6 GHz, obtained by rotations of the RFP in the far-field of a standard gain horn antenna. Field pattern measurements at 2.5 GHz are also presented. The measured field patterns are in good agreement with finite-element simulations of the RFP, establishing that the atom-based RF $E$ -field probe is well-suited for SI-traceable RF measurements over multiple bands. A one-time calibration procedure and an uncertainty analysis are introduced and implemented, as required for practical atomic probe designs to realize absolute-standard SI-traceable measurement capability. This includes uncertainty contributions from the atomic-spectroscopy measurement method and analysis and from the material, geometry, and hardware design. Simultaneous RF field and polarization measurements are demonstrated. RF waveform measurement is demonstrated using example pulsed and modulated RF signals.
- Open Access
Atom radio-frequency interferometry
We realize and model a Rydberg-state atom interferometer for measurement of phase and intensity of radio-frequency (RF) electromagnetic waves. A phase reference is supplied to the atoms via a modulated laser beam, enabling atomic measurement of the RF wave's phase without an external RF reference wave. The RF and optical fields give rise to closed interferometric loops within the atoms' internal Hilbert space. In our experiment, we construct interferometric loops in the state space $\{ 6P_{3/2}, 90S_{1/2}, 91S_{1/2}, 90P_{3/2} \}$ of cesium and employ them to measure phase and intensity of a 5 GHz RF wave in a room-temperature vapor cell. Electromagnetically induced transparency on the $6S_{1/2}$ to $6P_{3/2}$ transition serves as an all-optical interferometer probe. The RF phase is measured over a range of $\pi$, and a sensitivity of 2 mrad is achieved. RF phase and amplitude measurements at sub-millimeter optical spatial resolution are demonstrated.Open AccessAtom radio-frequency interferometry
We realize and model a Rydberg-state atom interferometer for measurement of phase and intensity of radio-frequency (RF) electromagnetic waves. A phase reference is supplied to the atoms via a modulated laser beam, enabling atomic measurement of the RF wave's phase without an external RF reference wave. The RF and optical fields give rise to closed interferometric loops within the atoms' internal Hilbert space. In our experiment, we construct interferometric loops in the state space $\{ 6P_{3/2}, 90S_{1/2}, 91S_{1/2}, 90P_{3/2} \}$ of cesium and employ them to measure phase and intensity of a 5 GHz RF wave in a room-temperature vapor cell. Electromagnetically induced transparency on the $6S_{1/2}$ to $6P_{3/2}$ transition serves as an all-optical interferometer probe. The RF phase is measured over a range of $\pi$, and a sensitivity of 2 mrad is achieved. RF phase and amplitude measurements at sub-millimeter optical spatial resolution are demonstrated. - 16 April 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 69 (5) , 2455-2462
An Atomic Receiver for AM and FM Radio Communication
Radio reception relies on antennas for the collection of electromagnetic fields carrying information, and receiver elements for demodulation and retrieval of the transmitted information. Here we demonstrate an atom-based receiver for AM and FM microwave communication with a 3-dB bandwidth in the baseband of ~100 kHz that provides optical circuit-free field pickup, multi-band carrier capability, and inherently high field sensitivity. The atom-based receiver exploits field-sensitive cesium Rydberg vapors in a centimeter-sized glass cell, and electromagnetically induced transparency, a quantum-optical effect, as a readout of baseband signals modulated onto carriers with frequencies ranging over four octaves, from C-band to Q-band. Receiver bandwidth, dynamic range and sideband suppression are characterized, and acquisition of audio waveforms of human vocals demonstrated. The atomic receiver is a valuable receiver technology because it does not require antenna structures and is resilient against electromagnetic interference, while affording multi-band operation in a single compact receiving element.
- 16 April 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 69 (5) , 2455-2462
An Atomic Receiver for AM and FM Radio Communication
Radio reception relies on antennas for the collection of electromagnetic fields carrying information, and receiver elements for demodulation and retrieval of the transmitted information. Here we demonstrate an atom-based receiver for AM and FM microwave communication with a 3-dB bandwidth in the baseband of ~100 kHz that provides optical circuit-free field pickup, multi-band carrier capability, and inherently high field sensitivity. The atom-based receiver exploits field-sensitive cesium Rydberg vapors in a centimeter-sized glass cell, and electromagnetically induced transparency, a quantum-optical effect, as a readout of baseband signals modulated onto carriers with frequencies ranging over four octaves, from C-band to Q-band. Receiver bandwidth, dynamic range and sideband suppression are characterized, and acquisition of audio waveforms of human vocals demonstrated. The atomic receiver is a valuable receiver technology because it does not require antenna structures and is resilient against electromagnetic interference, while affording multi-band operation in a single compact receiving element.
- 3 April 2020
- Published by IOP Publishing in Journal of Physics B: Atomic, Molecular and Optical Physics
- Vol. 53 (9) , 094003
Time dependence of Rydberg EIT in pulsed optical and RF fields
We investigate the time dependence of atom-light and atom-RF field interactions in Rydberg electromagnetically-induced transparency (EIT) in a room-temperature and heated vapour cell. Quantum-optical transients are observed with rapid onset and dissolution of EIT induced by coupler-light pulses. The formulation and dissolution times of EIT, transient signals, and their dependencies on light intensities and Rydberg-atom density are studied. Simulations of pulsed EIT are performed by solving a time-dependent three-level master equation, whose results are in excellent agreement with experimental observations, including accurately reproducing quantum-optical transients observed at both onset and dissolution. We explore the time-dependent response of EIT to RF fields resonant with a Rydberg–Rydberg transition. An upper limit to the fundamental atom-RF field response time and instantaneous RF detection bandwidth with EIT-based sensors and receivers is established.
- 3 April 2020
- Published by IOP Publishing in Journal of Physics B: Atomic, Molecular and Optical Physics
- Vol. 53 (9) , 094003
Time dependence of Rydberg EIT in pulsed optical and RF fields
We investigate the time dependence of atom-light and atom-RF field interactions in Rydberg electromagnetically-induced transparency (EIT) in a room-temperature and heated vapour cell. Quantum-optical transients are observed with rapid onset and dissolution of EIT induced by coupler-light pulses. The formulation and dissolution times of EIT, transient signals, and their dependencies on light intensities and Rydberg-atom density are studied. Simulations of pulsed EIT are performed by solving a time-dependent three-level master equation, whose results are in excellent agreement with experimental observations, including accurately reproducing quantum-optical transients observed at both onset and dissolution. We explore the time-dependent response of EIT to RF fields resonant with a Rydberg–Rydberg transition. An upper limit to the fundamental atom-RF field response time and instantaneous RF detection bandwidth with EIT-based sensors and receivers is established.
- Open Access
A self-calibrating SI-traceable broadband Rydberg atom-based radio-frequency electric field probe and measurement instrument
We present a self-calibrating, SI-traceable broadband Rydberg-atom-based radio-frequency (RF) electric field probe (the Rydberg Field Probe or RFP) and measurement instrument (Rydberg Field Measurement System or RFMS). The RFMS comprises an atomic RF field probe (RFP), connected by a ruggedized fiber-optic patch cord to a portable mainframe control unit with a software interface for RF measurement and analysis including real-time field readout and RF waveform visualization. The instrument employs electromagnetically induced transparency (EIT) readout of spectral signatures from RF-sensitive Rydberg states of an atomic vapor for continuous, pulsed, and modulated RF field measurement. The RFP exploits resonant and off-resonant Rydberg-field interactions to realize broadband RF measurements at frequencies ranging from ~10 MHz to sub-THz over a wide dynamic range. The RFMS incorporates an RF-field-free atomic reference and a laser-frequency tracker to ensure reliability and accuracy of the RF measurement. We characterize the RFP and measure polar field and polarization patterns of the RFP at 12.6 GHz RF in the far-field of a standard gain horn antenna. Measurements at 2.5 GHz are also performed. Measured patterns are in good agreement with simulations. A detailed calibration procedure and uncertainty analysis are presented that account for deviations from an isotropic response over a $4\pi$ solid angle, arising from dielectric structures external to the atomic measurement volume. Contributions to the measurement uncertainty from the fundamental atomic measurement method and associated analysis as well as material, geometry, and hardware design choices are accounted for. A calibration (C) factor is used to establish absolute-standard SI-traceable calibration of the RFP. Pulsed and modulated RF field measurement, and time-domain RF-pulse waveform imaging are also demonstrated.Open AccessA self-calibrating SI-traceable broadband Rydberg atom-based radio-frequency electric field probe and measurement instrument
We present a self-calibrating, SI-traceable broadband Rydberg-atom-based radio-frequency (RF) electric field probe (the Rydberg Field Probe or RFP) and measurement instrument (Rydberg Field Measurement System or RFMS). The RFMS comprises an atomic RF field probe (RFP), connected by a ruggedized fiber-optic patch cord to a portable mainframe control unit with a software interface for RF measurement and analysis including real-time field readout and RF waveform visualization. The instrument employs electromagnetically induced transparency (EIT) readout of spectral signatures from RF-sensitive Rydberg states of an atomic vapor for continuous, pulsed, and modulated RF field measurement. The RFP exploits resonant and off-resonant Rydberg-field interactions to realize broadband RF measurements at frequencies ranging from ~10 MHz to sub-THz over a wide dynamic range. The RFMS incorporates an RF-field-free atomic reference and a laser-frequency tracker to ensure reliability and accuracy of the RF measurement. We characterize the RFP and measure polar field and polarization patterns of the RFP at 12.6 GHz RF in the far-field of a standard gain horn antenna. Measurements at 2.5 GHz are also performed. Measured patterns are in good agreement with simulations. A detailed calibration procedure and uncertainty analysis are presented that account for deviations from an isotropic response over a $4\pi$ solid angle, arising from dielectric structures external to the atomic measurement volume. Contributions to the measurement uncertainty from the fundamental atomic measurement method and associated analysis as well as material, geometry, and hardware design choices are accounted for. A calibration (C) factor is used to establish absolute-standard SI-traceable calibration of the RFP. Pulsed and modulated RF field measurement, and time-domain RF-pulse waveform imaging are also demonstrated.