Hong Jiang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Hong Jiang has a total of 54 co-authors. Here are the top co-authors by number of shared publications:
Qi Zhang
8 shared publicationsChang Liu
5 shared publicationsLiangdong Qu
5 shared publicationsRui Yang
College of Communication Engineering Jilin University Changchun China
4 shared publications- Wen-Gen Tang
College of Communication Engineering, Jilin University, Changchun, 130012, China
4 shared publications Yu Zhang
College of Communication Engineering, Jilin University, Changchun 130012, China
4 shared publications
Latest Publications
- Open Access
- 30 January 2026
- Published by River Publishers in Applied Computational Electromagnetics Society Journal (ACES)
- p. 81–94
Electromagnetic Shielding Effectiveness Prediction of Stacked, Chassis Based on Snow Ablation Optimizer Algorithm
Stacked chassis has wide application in aerospace integrated electronic systems. However, with irregular enclosure structure and multi-module integrated into small space, its electromagnetic shielding effectiveness (SE) prediction is a challenge problem. In this paper, a novel method of SE prediction for stacked chassis is proposed based on snow-ablation optimizer (SAO) algorithm. First, a dedicated model of stacked chassis is selected and the SE at five internal sampling points is obtained via full-wave numerical simulation. Then, building on the Robinson equivalent model combined with the generalized Baum-Liu-Tesche (BLT) equations, and exploiting the initial simulation data as priors, the characteristic parameters of the stacked chassis are achieved via the SAO algorithm. On this basis and under vertically polarized and normally incident plane wave, the SE is predicted at all the positions across the central axis normal to the incident face of the chassis. The prediction results enable identification of the optimal SE distribution along frequency axis inside the chassis, thereby informing the internal layout and placement of sensitive devices. The prediction curves agree well with the simulation results, which can overcome the large-error limitations of conventional analytical approaches for complex cavities.
- 30 January 2026
- Published by River Publishers in Applied Computational Electromagnetics Society Journal (ACES)
- p. 81–94
Open AccessElectromagnetic Shielding Effectiveness Prediction of Stacked, Chassis Based on Snow Ablation Optimizer Algorithm
Stacked chassis has wide application in aerospace integrated electronic systems. However, with irregular enclosure structure and multi-module integrated into small space, its electromagnetic shielding effectiveness (SE) prediction is a challenge problem. In this paper, a novel method of SE prediction for stacked chassis is proposed based on snow-ablation optimizer (SAO) algorithm. First, a dedicated model of stacked chassis is selected and the SE at five internal sampling points is obtained via full-wave numerical simulation. Then, building on the Robinson equivalent model combined with the generalized Baum-Liu-Tesche (BLT) equations, and exploiting the initial simulation data as priors, the characteristic parameters of the stacked chassis are achieved via the SAO algorithm. On this basis and under vertically polarized and normally incident plane wave, the SE is predicted at all the positions across the central axis normal to the incident face of the chassis. The prediction results enable identification of the optimal SE distribution along frequency axis inside the chassis, thereby informing the internal layout and placement of sensitive devices. The prediction curves agree well with the simulation results, which can overcome the large-error limitations of conventional analytical approaches for complex cavities.
- Open Access
- 1 January 2026
- Published by Institution of Engineering and Technology (IET) in Electronics Letters
- Vol. 62 (1) , e70695
Total Power Minimization‐Based Power Allocation Strategies for Multicarrier DFRC System Under Rate and CRLB Constraints
Apart from the radar or/and communication performance improvement, power‐saving is also an important metric in multicarrier dual‐functional radar‐communication (DFRC) system. To this end, this letter explores the power allocation problem in multicarrier DFRC system by minimizing the total radiated power with the constraints of communication data rate, Cramér–Rao lower bound (CRLB) of target time delay estimation and subcarrier power. We present two power allocation strategies that are suitable for different scenarios, one considering the total data rate constraint while the other considering the data rate constraint on each subcarrier. Two resulting optimization problems are solved by converting them into convex problem and linear programming problem, respectively. Via numerical simulations, the proposed two strategies are compared with other power allocation strategies under different communication data rates and CRLB thresholds. The results indicate that our power allocation strategies are power‐saving and can achieve a great trade‐off between the total radiated power and the performance of radar and communication.
- 1 January 2026
- Published by Institution of Engineering and Technology (IET) in Electronics Letters
- Vol. 62 (1) , e70695
Open AccessTotal Power Minimization‐Based Power Allocation Strategies for Multicarrier DFRC System Under Rate and CRLB Constraints
Apart from the radar or/and communication performance improvement, power‐saving is also an important metric in multicarrier dual‐functional radar‐communication (DFRC) system. To this end, this letter explores the power allocation problem in multicarrier DFRC system by minimizing the total radiated power with the constraints of communication data rate, Cramér–Rao lower bound (CRLB) of target time delay estimation and subcarrier power. We present two power allocation strategies that are suitable for different scenarios, one considering the total data rate constraint while the other considering the data rate constraint on each subcarrier. Two resulting optimization problems are solved by converting them into convex problem and linear programming problem, respectively. Via numerical simulations, the proposed two strategies are compared with other power allocation strategies under different communication data rates and CRLB thresholds. The results indicate that our power allocation strategies are power‐saving and can achieve a great trade‐off between the total radiated power and the performance of radar and communication.
- 7 August 2025
- Published by Elsevier in Digital Signal Processing
- Vol. 168
Gridless range-velocity estimation of moving vehicles in OTFS-based millimeter-wave joint radar and communication system
- 7 August 2025
- Published by Elsevier in Digital Signal Processing
- Vol. 168
Gridless range-velocity estimation of moving vehicles in OTFS-based millimeter-wave joint radar and communication system
- Open Access
- 10 September 2024
- Published by MDPI AG in Remote Sensing
- Vol. 16 (18) , 3366
Four-Dimensional Parameter Estimation for Mixed Far-Field and Near-Field Target Localization Using Bistatic MIMO Arrays and Higher-Order Singular Value Decomposition
In this paper, we present a novel four-dimensional (4D) parameter estimation method to localize the mixed far-field (FF) and near-field (NF) targets using bistatic MIMO arrays and higher-order singular value decomposition (HOSVD). The estimated four parameters include the angle-of-departure (AOD), angle-of-arrival (AOA), range-of-departure (ROD), and range-of-arrival (ROA). In the method, we store array data in a tensor form to preserve the inherent multidimensional properties of the array data. First, the observation data are arranged into a third-order tensor and its covariance tensor is calculated. Then, the HOSVD of the covariance tensor is performed. From the left singular vector matrices of the corresponding module expansion of the covariance tensor, the subspaces with respect to transmit and receive arrays are obtained, respectively. The AOD and AOA of the mixed FF and NF targets are estimated with signal-subspace, and the ROD and ROA of the NF targets are achieved using noise-subspace. Finally, the estimated four parameters are matched via a pairing method. The Cramér–Rao lower bound (CRLB) of the mixed target parameters is also derived. The numerical simulations demonstrate the superiority of the tensor-based method.
- 10 September 2024
- Published by MDPI AG in Remote Sensing
- Vol. 16 (18) , 3366
Open AccessFour-Dimensional Parameter Estimation for Mixed Far-Field and Near-Field Target Localization Using Bistatic MIMO Arrays and Higher-Order Singular Value Decomposition
In this paper, we present a novel four-dimensional (4D) parameter estimation method to localize the mixed far-field (FF) and near-field (NF) targets using bistatic MIMO arrays and higher-order singular value decomposition (HOSVD). The estimated four parameters include the angle-of-departure (AOD), angle-of-arrival (AOA), range-of-departure (ROD), and range-of-arrival (ROA). In the method, we store array data in a tensor form to preserve the inherent multidimensional properties of the array data. First, the observation data are arranged into a third-order tensor and its covariance tensor is calculated. Then, the HOSVD of the covariance tensor is performed. From the left singular vector matrices of the corresponding module expansion of the covariance tensor, the subspaces with respect to transmit and receive arrays are obtained, respectively. The AOD and AOA of the mixed FF and NF targets are estimated with signal-subspace, and the ROD and ROA of the NF targets are achieved using noise-subspace. Finally, the estimated four parameters are matched via a pairing method. The Cramér–Rao lower bound (CRLB) of the mixed target parameters is also derived. The numerical simulations demonstrate the superiority of the tensor-based method.
- Open Access
- 21 August 2024
- Published by MDPI AG in Remote Sensing
- Vol. 16 (16) , 3083
Joint Constant-Modulus Waveform and RIS Phase Shift Design for Terahertz Dual-Function MIMO Radar and Communication System
This paper considers a terahertz (THz) dual-function multi-input multi-output (MIMO) radar and communication system with the assistance of a reconfigurable intelligent surface (RIS) and jointly designs the constant modulus (CM) waveform and RIS phase shifts. A weighted optimization scheme is presented, to minimize the weighted sum of three objectives, including communication multi-user interference (MUI) energy, the negative of multi-target illumination power and the MIMO radar waveform similarity error under a CM constraint. For the formulated non-convex problem, a novel alternating coordinate descent (ACD) algorithm is introduced, to transform it into two subproblems for waveform and phase shift design. Unlike the existing optimization algorithms that solve each subproblem by iteratively approximating the optimal solution with iteration stepsize selection, the ACD algorithm can alternately solve each subproblem by dividing it into multiple simpler problems, to achieve closed-form solutions. Our numerical simulations demonstrate the superiorities of the ACD algorithm over the existing methods. In addition, the impacts of the weighting coefficients, RIS and channel conditions on the radar communication performance of the THz system are analyzed.
- 21 August 2024
- Published by MDPI AG in Remote Sensing
- Vol. 16 (16) , 3083
Open AccessJoint Constant-Modulus Waveform and RIS Phase Shift Design for Terahertz Dual-Function MIMO Radar and Communication System
This paper considers a terahertz (THz) dual-function multi-input multi-output (MIMO) radar and communication system with the assistance of a reconfigurable intelligent surface (RIS) and jointly designs the constant modulus (CM) waveform and RIS phase shifts. A weighted optimization scheme is presented, to minimize the weighted sum of three objectives, including communication multi-user interference (MUI) energy, the negative of multi-target illumination power and the MIMO radar waveform similarity error under a CM constraint. For the formulated non-convex problem, a novel alternating coordinate descent (ACD) algorithm is introduced, to transform it into two subproblems for waveform and phase shift design. Unlike the existing optimization algorithms that solve each subproblem by iteratively approximating the optimal solution with iteration stepsize selection, the ACD algorithm can alternately solve each subproblem by dividing it into multiple simpler problems, to achieve closed-form solutions. Our numerical simulations demonstrate the superiorities of the ACD algorithm over the existing methods. In addition, the impacts of the weighting coefficients, RIS and channel conditions on the radar communication performance of the THz system are analyzed.
- Open Access
- 14 July 2024
- Published by MDPI AG in Remote Sensing
- Vol. 16 (14) , 2582
Intrapulse Modulation Radar Signal Recognition Using CNN with Second-Order STFT-Based Synchrosqueezing Transform
Intrapulse modulation classification of radar signals plays an important role in modern electronic reconnaissance, countermeasures, etc. In this paper, to improve the recognition rate at low signal-to-noise ratio (SNR), we propose a recognition method using the second-order short-time Fourier transform (STFT)-based synchrosqueezing transform (FSST2) combined with a modified convolution neural network, which we name MeNet. In particular, the radar signals are first preprocessed via the time–frequency analysis and STFT-based FSST2. Then, the informative features of the time–frequency images (TFIs) are deeply learned and classified through the MeNet with several specific convolutional blocks. The simulation results show that the overall recognition rate for seven types of intrapulse modulation radar signals can reach 95.6%, even when the SNR is −12 dB. Compared with other networks, the excellent recognition rate proves the superiority of our method.
- 14 July 2024
- Published by MDPI AG in Remote Sensing
- Vol. 16 (14) , 2582
Open AccessIntrapulse Modulation Radar Signal Recognition Using CNN with Second-Order STFT-Based Synchrosqueezing Transform
Intrapulse modulation classification of radar signals plays an important role in modern electronic reconnaissance, countermeasures, etc. In this paper, to improve the recognition rate at low signal-to-noise ratio (SNR), we propose a recognition method using the second-order short-time Fourier transform (STFT)-based synchrosqueezing transform (FSST2) combined with a modified convolution neural network, which we name MeNet. In particular, the radar signals are first preprocessed via the time–frequency analysis and STFT-based FSST2. Then, the informative features of the time–frequency images (TFIs) are deeply learned and classified through the MeNet with several specific convolutional blocks. The simulation results show that the overall recognition rate for seven types of intrapulse modulation radar signals can reach 95.6%, even when the SNR is −12 dB. Compared with other networks, the excellent recognition rate proves the superiority of our method.
- Open Access
- 25 March 2024
- Published by River Publishers in Applied Computational Electromagnetics Society Journal (ACES)
- Vol. 38 (11) , 875-885
Simulation Analysis of Electromagnetic Environment Effect and Shielding Effectiveness for VPX Chassis under Plane Wave Radiation
The chassis based on the VPX bus standard structure has been widely applied to the fields of vehicle, missile, radar, etc. In this paper, we analyze the electromagnetic environment effect on VPX chassis via the CST software, and investigate the electromagnetic coupling characteristics of VPX chassis under 20 v/m plane wave radiation according to the RS103 test defined in the MIL-STD-461G standard. By simulation, we analyze the electromagnetic coupling paths of the VPX chassis, find the key positions of the electromagnetic protection such as the air intake, air outlet, trapdoor, and panel gaps, and we propose the electromagnetic protective measures for the weak parts of the VPX chassis. The electromagnetic shielding effectiveness before and after protection design is evaluated. Finally, the simulation results are verified by the experiments. It has guiding significance for the electromagnetic protection design of VPX chassis.
- 25 March 2024
- Published by River Publishers in Applied Computational Electromagnetics Society Journal (ACES)
- Vol. 38 (11) , 875-885
Open AccessSimulation Analysis of Electromagnetic Environment Effect and Shielding Effectiveness for VPX Chassis under Plane Wave Radiation
The chassis based on the VPX bus standard structure has been widely applied to the fields of vehicle, missile, radar, etc. In this paper, we analyze the electromagnetic environment effect on VPX chassis via the CST software, and investigate the electromagnetic coupling characteristics of VPX chassis under 20 v/m plane wave radiation according to the RS103 test defined in the MIL-STD-461G standard. By simulation, we analyze the electromagnetic coupling paths of the VPX chassis, find the key positions of the electromagnetic protection such as the air intake, air outlet, trapdoor, and panel gaps, and we propose the electromagnetic protective measures for the weak parts of the VPX chassis. The electromagnetic shielding effectiveness before and after protection design is evaluated. Finally, the simulation results are verified by the experiments. It has guiding significance for the electromagnetic protection design of VPX chassis.
- Open Access
- 29 March 2023
- Published by Springer Nature in EURASIP Journal on Advances in Signal Processing
- Vol. 2023 (1) , 1-23
Joint range, angle and polarization estimation in polarimetric FDA-MIMO radar based on Tucker tensor decomposition
Frequency diverse array multiple-input multiple-output (FDA-MIMO) radar is an emerging technology to offer range-angle-dependent beampattern. Polarimetric FDA-MIMO radar can sense additional polarization information to improve target identification capability. In this article, we investigate the problem of joint range, angle and polarization parameter estimation in a monostatic polarimetric FDA-MIMO radar with an FDA at transmitter and a cross-dipole array at receiver. Unlike the conventional methods in which the multidimensional data structure is rearranged into vectors or matrices by stacking operation, we propose a Tucker tensor decomposition-based scheme, which can reserve the original data structure and avoid spoiling the inherent characteristics of interest, especially when the number of snapshots is small. The third-order tensor model of the observed data is constructed. Two approaches named as Tucker covariance reconstruction and Tucker signal subspace are presented using the fourth-order covariance tensor decomposition. The Cramér–Rao bound for range, angle and polarization estimation is also provided. Numerical experiments demonstrate the superiorities of the proposed approaches. Specifically, two targets with identical range and close angles are effectively distinguished.
- 29 March 2023
- Published by Springer Nature in EURASIP Journal on Advances in Signal Processing
- Vol. 2023 (1) , 1-23
Open AccessJoint range, angle and polarization estimation in polarimetric FDA-MIMO radar based on Tucker tensor decomposition
Frequency diverse array multiple-input multiple-output (FDA-MIMO) radar is an emerging technology to offer range-angle-dependent beampattern. Polarimetric FDA-MIMO radar can sense additional polarization information to improve target identification capability. In this article, we investigate the problem of joint range, angle and polarization parameter estimation in a monostatic polarimetric FDA-MIMO radar with an FDA at transmitter and a cross-dipole array at receiver. Unlike the conventional methods in which the multidimensional data structure is rearranged into vectors or matrices by stacking operation, we propose a Tucker tensor decomposition-based scheme, which can reserve the original data structure and avoid spoiling the inherent characteristics of interest, especially when the number of snapshots is small. The third-order tensor model of the observed data is constructed. Two approaches named as Tucker covariance reconstruction and Tucker signal subspace are presented using the fourth-order covariance tensor decomposition. The Cramér–Rao bound for range, angle and polarization estimation is also provided. Numerical experiments demonstrate the superiorities of the proposed approaches. Specifically, two targets with identical range and close angles are effectively distinguished.