José Vicente Ros-Lis
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
José Vicente Ros-Lis has a total of 182 co-authors. Here are the top co-authors by number of shared publications:
- Pedro Amorós
Institut de Ciencia dels Materials (ICMUV), Universitat de València, Valencia, Spain
22 shared publications - Ramón Martínez-Máñez
Instituto Interuniversitario de Investigación de Reconocimiento Molecular y Desarrollo Tecnológico (IDM), Universitat Politècnica de València, Universitat de València, Spain
21 shared publications - Jamal El Haskouri
Department of Inorganic Chemistry, Instituto de Ciencias de Los Materiales de la Universitad de Valencia, Calle Catedratico José Beltran 2, 46980, Paterna, Valencia, Spain
11 shared publications - Juan Soto
Centro de Reconocimiento Molecular y Desarrollo Tecnológico (IDM), Unidad Mixta Universidad Politécnica de Valencia–Universidad de Valencia de Valéncia, Camino de Vera s/n, E-46022 Valencia, Spain
9 shared publications - Maria Dolores Marcos
Instituto Interuniversitario de Investigación de Reconocimiento Molecular y Desarrollo Tecnológico (IDM), Universitat Politècnica de València, Universitat de València, 46022 Valencia, Spain
8 shared publications Félix Sancenón
7 shared publications
Latest Publications
- Open Access
- 20 October 2026
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 9 (43) , 20398-20410
Dual-Function Hierarchical Bimodal Mesoporous Silica Nanomaterials for Exceptional Sevoflurane Capture and Real-Time Sensing
In this study, we investigated the ability of hierarchical bimodal mesoporous silica nanomaterials (UVM-7 type), composed of aggregated mesoporous primary particles, to absorb anesthetic gases, particularly sevoflurane. We compared their adsorption and desorption capacities with those of microporous carbons in commercial cartridges designed to capture anesthetic gases, such as CONTRAfluran and FlurAbsorb. To analyze the importance of porosity type, we also included Stöber-type unimodal mesoporous silicas and other non-porous siliceous supports in the study. Pure UVM-7 silica can capture up to 2.52 mL of gas per gram. This is much higher than for commercial carbons, which range from 0.2 to 0.34 mL/g. In addition, gas desorption occurs more efficiently than with carbons. We selected a range of materials with distinctly different pore systems to analyze the relationship between pore type and adsorption properties. To achieve this objective, a range of techniques was used to characterize the materials and reveal their structural architecture. Additionally, the adsorption and desorption processes were modeled using five models, which helped elucidate the parameters that govern their kinetics. The sevoflurane capture capacity of iron-functionalized UVM-7 silicas has also been evaluated. These materials preserve the porous architecture of the original silica and contain nanodomains of hematite within their mesopore walls, imparting a brownish-red color. Color attenuation upon sevoflurane adsorption provides a visible optical response, likely arising from changes in light scattering within the hierarchical particle structure, including possible Mie-type contributions.
- 20 October 2026
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 9 (43) , 20398-20410
Open AccessDual-Function Hierarchical Bimodal Mesoporous Silica Nanomaterials for Exceptional Sevoflurane Capture and Real-Time Sensing
In this study, we investigated the ability of hierarchical bimodal mesoporous silica nanomaterials (UVM-7 type), composed of aggregated mesoporous primary particles, to absorb anesthetic gases, particularly sevoflurane. We compared their adsorption and desorption capacities with those of microporous carbons in commercial cartridges designed to capture anesthetic gases, such as CONTRAfluran and FlurAbsorb. To analyze the importance of porosity type, we also included Stöber-type unimodal mesoporous silicas and other non-porous siliceous supports in the study. Pure UVM-7 silica can capture up to 2.52 mL of gas per gram. This is much higher than for commercial carbons, which range from 0.2 to 0.34 mL/g. In addition, gas desorption occurs more efficiently than with carbons. We selected a range of materials with distinctly different pore systems to analyze the relationship between pore type and adsorption properties. To achieve this objective, a range of techniques was used to characterize the materials and reveal their structural architecture. Additionally, the adsorption and desorption processes were modeled using five models, which helped elucidate the parameters that govern their kinetics. The sevoflurane capture capacity of iron-functionalized UVM-7 silicas has also been evaluated. These materials preserve the porous architecture of the original silica and contain nanodomains of hematite within their mesopore walls, imparting a brownish-red color. Color attenuation upon sevoflurane adsorption provides a visible optical response, likely arising from changes in light scattering within the hierarchical particle structure, including possible Mie-type contributions.
- Open Access
- 10 July 2026
- Published by MDPI AG in Clean Technologies
- Vol. 8 (4) , 106
Global Warming Potential of the Change in Land Use from Citrus Fields to Solar Parks
The current trend towards decarbonization has increased the pressure towards land use change through the installation of solar parks on agricultural fields. The usefulness of RothC to model the evolution of soil carbon after the installation of the solar park has been validated in a field with historic data. The model has been applied to evaluate the impact of a large-scale modification of land use in Valencia (Spain), a mediterranean region with an ambitious plan for the installation of renewable energy. The removal of the orange trees for the installation of a solar park would generate a carbon release in CO2 eq to 72 Mg ha−1. If the soil is left vacant of vegetation, another 28 Mg ha−1 would be emitted in 30 years. By contrast, if the soil is covered by scrubland, an overall CO2 capture of −226 Mg ha−1 could be achieved, including the impact of the initial plant removal. If we consider the Valencia region, the installation of 12.000 hectares of solar parks could generate up to 1.2 × 106 Mg of CO2 emissions or capture 2.7 × 106 Mg of CO2. Also, a sensitivity analysis to evaluate the effect of the main labels has been performed, revealing that the original carbon content is the most relevant label, followed by plant input and the % of soil covered by the solar panels. The limited availability in experimental data means that this study should be considered an exploratory evaluation of the impact of including plantations in solar parks.
- 10 July 2026
- Published by MDPI AG in Clean Technologies
- Vol. 8 (4) , 106
Open AccessGlobal Warming Potential of the Change in Land Use from Citrus Fields to Solar Parks
The current trend towards decarbonization has increased the pressure towards land use change through the installation of solar parks on agricultural fields. The usefulness of RothC to model the evolution of soil carbon after the installation of the solar park has been validated in a field with historic data. The model has been applied to evaluate the impact of a large-scale modification of land use in Valencia (Spain), a mediterranean region with an ambitious plan for the installation of renewable energy. The removal of the orange trees for the installation of a solar park would generate a carbon release in CO2 eq to 72 Mg ha−1. If the soil is left vacant of vegetation, another 28 Mg ha−1 would be emitted in 30 years. By contrast, if the soil is covered by scrubland, an overall CO2 capture of −226 Mg ha−1 could be achieved, including the impact of the initial plant removal. If we consider the Valencia region, the installation of 12.000 hectares of solar parks could generate up to 1.2 × 106 Mg of CO2 emissions or capture 2.7 × 106 Mg of CO2. Also, a sensitivity analysis to evaluate the effect of the main labels has been performed, revealing that the original carbon content is the most relevant label, followed by plant input and the % of soil covered by the solar panels. The limited availability in experimental data means that this study should be considered an exploratory evaluation of the impact of including plantations in solar parks.
- Open Access
- 1 July 2026
- Published by KEAI Publishing in Advanced Agrochem
Nanobiopesticide based on Cry3Aa@mesoporous silica: improving stability and pesticide activity via support engineering
- 1 July 2026
- Published by KEAI Publishing in Advanced Agrochem
Open AccessNanobiopesticide based on Cry3Aa@mesoporous silica: improving stability and pesticide activity via support engineering
- Open Access
- 27 May 2026
- Published by Elsevier in Microporous and Mesoporous Materials
- Vol. 412
Biomimetic abiotic degradation as a sustainable tool to synthesize Stöber-type silicas with expanded mesopores of modulable size
- 27 May 2026
- Published by Elsevier in Microporous and Mesoporous Materials
- Vol. 412
Open AccessBiomimetic abiotic degradation as a sustainable tool to synthesize Stöber-type silicas with expanded mesopores of modulable size
- Open Access
- 2 February 2026
- Published by Elsevier in Smart Agricultural Technology
- Vol. 13
Smart sensing of Leptinotarsa decemlineata infestations using a portable optical array
- 2 February 2026
- Published by Elsevier in Smart Agricultural Technology
- Vol. 13
Open AccessSmart sensing of Leptinotarsa decemlineata infestations using a portable optical array
- Open Access
Detection of Tuber melanosporum Using Optoelectronic Technology
Tuber melanosporum, the black truffle, is a fungus of high economic and ecological value, but its underground detection remains a challenge due to the lack of reliable, non-invasive methods. This study presents the development and proof of concept of a portable optoelectronic nose that integrates nine optical sensors and one electrochemical sensor for the in vitro identification of T. melanosporum. The optical sensors use colorimetric and fluorogenic molecular indicators supported on UVM-7, alumina, and silica. Tests were performed with truffles at different depths and in the presence of soil and compost to evaluate the device’s multi-source response. Partial least squares discriminant analysis (PLS-DA) models showed robust discrimination between soil, compost, and truffles, with an accuracy of 0.91 under most conditions. Detection at 30 cm showed an accuracy of 0.94, confirming the system’s ability to differentiate between sample types. Performance improved in simplified scenarios based on the presence or absence of truffles. Furthermore, the artificial neural network models achieved optimal results in binary classification. Taken together, the results support the system’s potential as an accurate, non-invasive tool with possible application to the agronomic management of truffle orchards.
Open AccessDetection of Tuber melanosporum Using Optoelectronic Technology
Tuber melanosporum, the black truffle, is a fungus of high economic and ecological value, but its underground detection remains a challenge due to the lack of reliable, non-invasive methods. This study presents the development and proof of concept of a portable optoelectronic nose that integrates nine optical sensors and one electrochemical sensor for the in vitro identification of T. melanosporum. The optical sensors use colorimetric and fluorogenic molecular indicators supported on UVM-7, alumina, and silica. Tests were performed with truffles at different depths and in the presence of soil and compost to evaluate the device’s multi-source response. Partial least squares discriminant analysis (PLS-DA) models showed robust discrimination between soil, compost, and truffles, with an accuracy of 0.91 under most conditions. Detection at 30 cm showed an accuracy of 0.94, confirming the system’s ability to differentiate between sample types. Performance improved in simplified scenarios based on the presence or absence of truffles. Furthermore, the artificial neural network models achieved optimal results in binary classification. Taken together, the results support the system’s potential as an accurate, non-invasive tool with possible application to the agronomic management of truffle orchards.
- 6 September 2025
- Published by Springer Nature in Food and Environmental Virology
- Vol. 17 (4) , 1-9
Use of Electrolysed Water as Disinfection Technology in Front of Various Microorganisms and SARS-COV-2
The global emergence of SARS-CoV-2 has highlighted the urgent need for effective disinfection strategies to mitigate virus transmission. Electrolyzed water (EW), an eco-friendly and cost-effective biocidal agent, has garnered attention for its broad-spectrum antimicrobial activity. This study evaluates the virucidal, bactericidal, and fungicidal capacities of EW with diverse pH, with a focus on its effectiveness against SARS-CoV-2 and other pathogens. EW was generated under controlled conditions with adjustable pH (4.5 and 6.1) and free available chlorine (FAC) concentrations (300–1000 ppm). The biocidal activity was tested on surfaces and in solution following standardized protocols. Results demonstrated that oxidized EW at optimized concentrations achieved a ≥ 4 log reduction in bacterial populations and effectively inactivated enveloped and non-enveloped viruses, but this effect depends on FAC, pH, and contact time. Notably, EW reduced SARS-CoV-2 by > 4 log in solution and surfaces, in only 2 and 5 min, respectively. These findings highlight the potential of EW as a sustainable, multi-application disinfectant to combat emerging pathogens like SARS-CoV-2, ensuring public health safety.
- 6 September 2025
- Published by Springer Nature in Food and Environmental Virology
- Vol. 17 (4) , 1-9
Use of Electrolysed Water as Disinfection Technology in Front of Various Microorganisms and SARS-COV-2
The global emergence of SARS-CoV-2 has highlighted the urgent need for effective disinfection strategies to mitigate virus transmission. Electrolyzed water (EW), an eco-friendly and cost-effective biocidal agent, has garnered attention for its broad-spectrum antimicrobial activity. This study evaluates the virucidal, bactericidal, and fungicidal capacities of EW with diverse pH, with a focus on its effectiveness against SARS-CoV-2 and other pathogens. EW was generated under controlled conditions with adjustable pH (4.5 and 6.1) and free available chlorine (FAC) concentrations (300–1000 ppm). The biocidal activity was tested on surfaces and in solution following standardized protocols. Results demonstrated that oxidized EW at optimized concentrations achieved a ≥ 4 log reduction in bacterial populations and effectively inactivated enveloped and non-enveloped viruses, but this effect depends on FAC, pH, and contact time. Notably, EW reduced SARS-CoV-2 by > 4 log in solution and surfaces, in only 2 and 5 min, respectively. These findings highlight the potential of EW as a sustainable, multi-application disinfectant to combat emerging pathogens like SARS-CoV-2, ensuring public health safety.
- Open Access
- 2 April 2025
- Published by MDPI AG in Chemosensors
- Vol. 13 (4) , 125
Polydopamine-Coated Magnetite as a Sensing Material for the Optical Detection of Cationic Surfactants
The sensing of surfactants is a topic of interest for industrial and environmental purposes. Polydopamine-coated magnetite (Fe3O4@PDA) can be a relevant support for the detection of cationic surfactants in water samples. The negative charge in the surface of the PDA material favors the interaction with cationic molecules and allows the design of a chemoreagent for the detection of cationic surfactants by displacement or competition with methylene blue (MB). Magnetite nanoparticles with single and double PDA coating have been prepared and characterized. The PDA surface effectively coats magnetite nanoparticles with a thickness of 5 or 19 nm and a Z potential of −30 mV. The adsorption of MB follows second-order kinetics, and up 33 mg of dye can be loaded in 1 g of the support. The cationic surfactants can displace MB from the Fe3O4@PDA surface, coloring the solution. Thus, it can be applied for the analysis of water samples. The system is selective towards cationic molecules with long alkyl chains, but the response is influenced by high concentrations of divalent cations. The material can be used following diverse sensing protocols with a detection range from 4 × 10−6 to 2 × 10−4 M. The simplicity of its handling together with the naked eye detection allows its application in kits for field analysis with screening purposes.
- 2 April 2025
- Published by MDPI AG in Chemosensors
- Vol. 13 (4) , 125
Open AccessPolydopamine-Coated Magnetite as a Sensing Material for the Optical Detection of Cationic Surfactants
The sensing of surfactants is a topic of interest for industrial and environmental purposes. Polydopamine-coated magnetite (Fe3O4@PDA) can be a relevant support for the detection of cationic surfactants in water samples. The negative charge in the surface of the PDA material favors the interaction with cationic molecules and allows the design of a chemoreagent for the detection of cationic surfactants by displacement or competition with methylene blue (MB). Magnetite nanoparticles with single and double PDA coating have been prepared and characterized. The PDA surface effectively coats magnetite nanoparticles with a thickness of 5 or 19 nm and a Z potential of −30 mV. The adsorption of MB follows second-order kinetics, and up 33 mg of dye can be loaded in 1 g of the support. The cationic surfactants can displace MB from the Fe3O4@PDA surface, coloring the solution. Thus, it can be applied for the analysis of water samples. The system is selective towards cationic molecules with long alkyl chains, but the response is influenced by high concentrations of divalent cations. The material can be used following diverse sensing protocols with a detection range from 4 × 10−6 to 2 × 10−4 M. The simplicity of its handling together with the naked eye detection allows its application in kits for field analysis with screening purposes.
- Open Access
- 26 February 2025
- Published by Royal Society of Chemistry (RSC) in New Journal of Chemistry
- Vol. 49 (14) , 5707-5715
Azadirachtin-based formulation in combination with mesoporous silica materials as a plague control agent
Formulations based on encapsulation of neem oil or azadirachtin in mesoporous silica, which are easy to prepare, scalable and applicable at the foliar level by dispersion, have shown efficacy in the field against pests such as Eutetranychus banksi.
- 26 February 2025
- Published by Royal Society of Chemistry (RSC) in New Journal of Chemistry
- Vol. 49 (14) , 5707-5715
Open AccessAzadirachtin-based formulation in combination with mesoporous silica materials as a plague control agent
Formulations based on encapsulation of neem oil or azadirachtin in mesoporous silica, which are easy to prepare, scalable and applicable at the foliar level by dispersion, have shown efficacy in the field against pests such as Eutetranychus banksi.
- Open Access
- 21 February 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (5) , 2334
Use of Electrolyzed Water as Disinfection Technology in Aquaculture Systems: Effects on Vibrio harveyi, a Significant Marine Pathogen for Marine Fish and Invertebrates
Background: The aquaculture sector is vital for food supply and marine species conservation. However, vibriosis poses significant threats, affecting fish and invertebrates. Vibrio harveyi outbreaks are increasing due to global warming-driven expansion of virulent strains. Methods: This study investigates the bactericidal potential of in situ-generated electrolyzed water (EW) as a complementary strategy to antibiotic therapy. Strains of V. harveyi isolated from diseased fish were exposed to EW under varying conditions of salinity (1.5 and 3%), pH (5, 6.5, and 7.5), and free available chlorine (FAC) (5, 20, 25, and 125 ppm) to reduce bacterial concentrations. Results: EW demonstrated high bactericidal potential at 20–25 ppm FAC and non-acidic pH, reducing bacterial populations by over four logarithmic units within 15 min. Efficacy diminished when EW was stored for days. Conclusions: EW shows a promising disinfection method during vibriosis outbreaks and as a preventive measure during stress in aquaculture. Its advantages include on-site production and avoidance of concentrated chemicals, which minimize health risks.
- 21 February 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (5) , 2334
Open AccessUse of Electrolyzed Water as Disinfection Technology in Aquaculture Systems: Effects on Vibrio harveyi, a Significant Marine Pathogen for Marine Fish and Invertebrates
Background: The aquaculture sector is vital for food supply and marine species conservation. However, vibriosis poses significant threats, affecting fish and invertebrates. Vibrio harveyi outbreaks are increasing due to global warming-driven expansion of virulent strains. Methods: This study investigates the bactericidal potential of in situ-generated electrolyzed water (EW) as a complementary strategy to antibiotic therapy. Strains of V. harveyi isolated from diseased fish were exposed to EW under varying conditions of salinity (1.5 and 3%), pH (5, 6.5, and 7.5), and free available chlorine (FAC) (5, 20, 25, and 125 ppm) to reduce bacterial concentrations. Results: EW demonstrated high bactericidal potential at 20–25 ppm FAC and non-acidic pH, reducing bacterial populations by over four logarithmic units within 15 min. Efficacy diminished when EW was stored for days. Conclusions: EW shows a promising disinfection method during vibriosis outbreaks and as a preventive measure during stress in aquaculture. Its advantages include on-site production and avoidance of concentrated chemicals, which minimize health risks.