Pier Parpot
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Pier Parpot has a total of 264 co-authors. Here are the top co-authors by number of shared publications:
- Isabel Correia Neves
CQUM, Centro de Química, Departamento de Química, Universidade do Minho, Campus de Gualtar, 4710-057 Braga, Portugal
24 shared publications - Antonio Mauricio Fonseca
CQUM, Centro de Química, Departamento de Química, Universidade do Minho, Campus de Gualtar, 4710-057 Braga, Portugal
22 shared publications - Manuel Fernando Ribeiro Pereira
LSRE-LCM, ALiCE, Faculty of Engineering, University of Porto, Rua Dr Roberto Frias, 4200-465 Porto, Portugal
15 shared publications - Ana Paula Bettencourt
Department of Chemistry, University of Minho, Campus de Gualtar, 4710-057 Braga, Portugal
8 shared publications - António Guerreiro Brito
LEAF - Linking Landscape, Environment, Agriculture and Food, School of Agriculture, University of Lisbon, Lisbon, Portugal
6 shared publications - Iwona Kuźniarska-Biernacka
REQUIMTE/LAQV, Department of Chemistry and Biochemistry, Faculty of Science, University of Porto, Rua do Campo Alegre s/n, 4169-007 Porto, Portugal
6 shared publications
Latest Publications
- Open Access
- 26 September 2025
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 15 (43) , 36380-36392
Antimicrobial agents based on metal-ion zeolite materials: a multivariate approach to microbial growth inhibition
Bacteria are susceptible to zeolites doped with metal ions. Although the complete mode of action remains unclear, it is widely accepted that metal ions kill bacteria by inducing the production of reactive oxygen species (ROS), which are detrimental to microbial life processes. In this study, two zeolite structures, MFI and LTA, were selected as hosts for the preparation of various metal-ion zeolite materials, which were then tested for their antimicrobial activity against eight different bacterial strains—Escherichia coli, Enterococcus faecalis, Klebsiella pneumoniae, Staphylococcus saprophyticus, Proteus mirabilis, Pseudomonas aeruginosa, methicillin-sensitive Staphylococcus aureus (MSSA) and methicillin-resistant Staphylococcus aureus (MRSA)—and five yeasts—Saccharomyces cerevisiae, Candida albicans, Candida tropicalis, Candida glabrata and Candida parapsilosis. Minimum inhibitory concentrations (MICs) and antimicrobial efficacies (%) were determined for each material–microbe pair. In addition to comparing eukaryotic and prokaryotic models, bacterial susceptibility was assessed across differences in cell wall structure (Gram-positive vs. Gram-negative), growth phase (exponential vs. stationary), and strain type (clinical isolate vs. type strain). Principal component analysis (PCA) and hierarchical clustering were used to identify patterns across MIC and antimicrobial efficacy data of the antimicrobial performance of metal-ion zeolite materials. Furthermore, ANOVA-simultaneous component analysis (ASCA) was applied on a balanced a posteriori designed dataset to assess the contribution of experimental factors to the observed variance. To demonstrate a direct application, selected samples were preliminary tested as coatings for fruit packaging to evaluate their potential for prolonging shelf life. These findings highlight the potential of metal-ion exchanged zeolites as antimicrobial agents for healthcare and food packaging applications.
- 26 September 2025
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 15 (43) , 36380-36392
Open AccessAntimicrobial agents based on metal-ion zeolite materials: a multivariate approach to microbial growth inhibition
Bacteria are susceptible to zeolites doped with metal ions. Although the complete mode of action remains unclear, it is widely accepted that metal ions kill bacteria by inducing the production of reactive oxygen species (ROS), which are detrimental to microbial life processes. In this study, two zeolite structures, MFI and LTA, were selected as hosts for the preparation of various metal-ion zeolite materials, which were then tested for their antimicrobial activity against eight different bacterial strains—Escherichia coli, Enterococcus faecalis, Klebsiella pneumoniae, Staphylococcus saprophyticus, Proteus mirabilis, Pseudomonas aeruginosa, methicillin-sensitive Staphylococcus aureus (MSSA) and methicillin-resistant Staphylococcus aureus (MRSA)—and five yeasts—Saccharomyces cerevisiae, Candida albicans, Candida tropicalis, Candida glabrata and Candida parapsilosis. Minimum inhibitory concentrations (MICs) and antimicrobial efficacies (%) were determined for each material–microbe pair. In addition to comparing eukaryotic and prokaryotic models, bacterial susceptibility was assessed across differences in cell wall structure (Gram-positive vs. Gram-negative), growth phase (exponential vs. stationary), and strain type (clinical isolate vs. type strain). Principal component analysis (PCA) and hierarchical clustering were used to identify patterns across MIC and antimicrobial efficacy data of the antimicrobial performance of metal-ion zeolite materials. Furthermore, ANOVA-simultaneous component analysis (ASCA) was applied on a balanced a posteriori designed dataset to assess the contribution of experimental factors to the observed variance. To demonstrate a direct application, selected samples were preliminary tested as coatings for fruit packaging to evaluate their potential for prolonging shelf life. These findings highlight the potential of metal-ion exchanged zeolites as antimicrobial agents for healthcare and food packaging applications.
- Open Access
- 6 August 2025
- Published by Elsevier in Journal of Biotechnology
- Vol. 407, 31-42
Microbial production of single cell oil from biowaste-derived volatile fatty acids using a newly identified oleaginous Cyberlindnera jadinii
- 6 August 2025
- Published by Elsevier in Journal of Biotechnology
- Vol. 407, 31-42
Open AccessMicrobial production of single cell oil from biowaste-derived volatile fatty acids using a newly identified oleaginous Cyberlindnera jadinii
- Open Access
Impact of Photoselective Nets on Phenolic Composition and Antioxidant Capacity in Different Apple Cultivars Under the Same Edaphoclimatic Conditions
Phenolic compounds in apples provide significant health benefits, including antioxidant, and anti-inflammatory properties. The phenolic profile and content in apples are influenced by genetics, environmental factors, and agricultural practices. Photoselective nets, which are designed to filter specific wavelengths of light, might impact fruit quality and phenolic content. This study aimed to assess the effects of photoselective nets on the antioxidant capacity and phenolic composition of three different apple cultivars grown under the same edaphoclimatic conditions. Five nets were selected. Fruits grown under the nets were compared with unprotected fruits. Antioxidant capacity was evaluated, and phenolic profiles were established by Ultra-High Performance Liquid Chromatography coupled with Time of Flight–Mass Spectrometry (UHPLC-ToF-MS). The results demonstrate a significant impact of the nets on the phenolic composition and antioxidant activities of apples. Different net colors had distinct effects on the accumulation of phenolic compounds, with some nets increasing flavonoid production and others reducing the levels of important phenolic acids. The gray and IRIDIUM® Red nets enhanced the production of quercetin and its derivatives, while chlorogenic acid showed a general decline under net-covered conditions, indicating a possible dependence on direct sunlight. The responses were also cultivar-dependent, with Gala redlum apples showing the largest reductions in phenolic compounds when protected by nets. Antioxidant assays also confirmed that the nets influenced the antioxidant potential of apples in a cultivar-dependent manner. These findings suggest that the retention of bioactive compounds in fruits might be strategically managed by selecting appropriate net materials for specific cultivars.
Open AccessImpact of Photoselective Nets on Phenolic Composition and Antioxidant Capacity in Different Apple Cultivars Under the Same Edaphoclimatic Conditions
Phenolic compounds in apples provide significant health benefits, including antioxidant, and anti-inflammatory properties. The phenolic profile and content in apples are influenced by genetics, environmental factors, and agricultural practices. Photoselective nets, which are designed to filter specific wavelengths of light, might impact fruit quality and phenolic content. This study aimed to assess the effects of photoselective nets on the antioxidant capacity and phenolic composition of three different apple cultivars grown under the same edaphoclimatic conditions. Five nets were selected. Fruits grown under the nets were compared with unprotected fruits. Antioxidant capacity was evaluated, and phenolic profiles were established by Ultra-High Performance Liquid Chromatography coupled with Time of Flight–Mass Spectrometry (UHPLC-ToF-MS). The results demonstrate a significant impact of the nets on the phenolic composition and antioxidant activities of apples. Different net colors had distinct effects on the accumulation of phenolic compounds, with some nets increasing flavonoid production and others reducing the levels of important phenolic acids. The gray and IRIDIUM® Red nets enhanced the production of quercetin and its derivatives, while chlorogenic acid showed a general decline under net-covered conditions, indicating a possible dependence on direct sunlight. The responses were also cultivar-dependent, with Gala redlum apples showing the largest reductions in phenolic compounds when protected by nets. Antioxidant assays also confirmed that the nets influenced the antioxidant potential of apples in a cultivar-dependent manner. These findings suggest that the retention of bioactive compounds in fruits might be strategically managed by selecting appropriate net materials for specific cultivars.
- Open Access
- 19 November 2024
- Published by Elsevier in International Journal of Biological Macromolecules
- Vol. 283, 137838
Production of highly oxidized starch in a flow cell using a nickel anode
- 19 November 2024
- Published by Elsevier in International Journal of Biological Macromolecules
- Vol. 283, 137838
Open AccessProduction of highly oxidized starch in a flow cell using a nickel anode
- Open Access
Y and ZSM-5 Hierarchical Zeolites Prepared Using a Surfactant-Mediated Strategy: Effect of the Treatment Conditions
Diffusional limitations associated with zeolite microporous systems can be overcome by developing hierarchical zeolites, i.e., materials with a micro- and mesoporous framework. In this work, Y and ZSM-5 zeolites were modified using a surfactant-mediated hydrothermal alkaline method, with NaOH and cetyltrimethylammonium bromide (CTAB). For Y zeolite, after a mild acidic pretreatment, the effect of the NaOH+CTAB treatment time was investigated. For ZSM-5 zeolite, different concentrations of the base and acid solutions were tested in the two-step pretreatment preceding the hydrothermal treatment. The properties of the materials were studied with different physical–chemical techniques. Hierarchical Y zeolites were characterized by 3.3–5 nm pores formed during the alkaline treatment through the structure reconstruction around the surfactant aggregates. The effectiveness of the NaOH+CTAB treatment was highly dependent on the duration. For intermediate treatment times (6–12 h), both smaller and larger mesopores were also obtained. Hierarchical ZSM-5 zeolites showed a disordered mesoporosity, mainly resulting from the pretreatment rather than from the subsequent hydrothermal treatment. High mesoporosity was obtained when the concentration of the pretreating base solution was sufficiently high and that of the acid one was not excessive. Hierarchical materials can be obtained for both zeolite structures, but the pretreatment and treatment conditions must be tailored to the starting zeolite and the desired type of mesoporosity.
Open AccessY and ZSM-5 Hierarchical Zeolites Prepared Using a Surfactant-Mediated Strategy: Effect of the Treatment Conditions
Diffusional limitations associated with zeolite microporous systems can be overcome by developing hierarchical zeolites, i.e., materials with a micro- and mesoporous framework. In this work, Y and ZSM-5 zeolites were modified using a surfactant-mediated hydrothermal alkaline method, with NaOH and cetyltrimethylammonium bromide (CTAB). For Y zeolite, after a mild acidic pretreatment, the effect of the NaOH+CTAB treatment time was investigated. For ZSM-5 zeolite, different concentrations of the base and acid solutions were tested in the two-step pretreatment preceding the hydrothermal treatment. The properties of the materials were studied with different physical–chemical techniques. Hierarchical Y zeolites were characterized by 3.3–5 nm pores formed during the alkaline treatment through the structure reconstruction around the surfactant aggregates. The effectiveness of the NaOH+CTAB treatment was highly dependent on the duration. For intermediate treatment times (6–12 h), both smaller and larger mesopores were also obtained. Hierarchical ZSM-5 zeolites showed a disordered mesoporosity, mainly resulting from the pretreatment rather than from the subsequent hydrothermal treatment. High mesoporosity was obtained when the concentration of the pretreating base solution was sufficiently high and that of the acid one was not excessive. Hierarchical materials can be obtained for both zeolite structures, but the pretreatment and treatment conditions must be tailored to the starting zeolite and the desired type of mesoporosity.
- 14 August 2024
- Published by Elsevier in Microporous and Mesoporous Materials
- Vol. 379
NiCu-exchanged hierarchical Y and ZSM5 zeolites for the electrochemical oxidation of glycerol
- 14 August 2024
- Published by Elsevier in Microporous and Mesoporous Materials
- Vol. 379
NiCu-exchanged hierarchical Y and ZSM5 zeolites for the electrochemical oxidation of glycerol
- Open Access
Acid Mine Drainage Precipitates from Mining Effluents as Adsorbents of Organic Pollutants for Water Treatment
Acid mine drainage (AMD) is one of the main environmental problems associated with mining activity, whether the mine is operational or abandoned. In this work, several precipitates from this mine drainage generated by the oxidation of sulfide minerals, when exposed to weathering, were used as adsorbents. Such AMD precipitates from abandoned Portuguese mines (AGO, AGO-1, CF, and V9) were compared with two raw materials from Morocco (ClayMA and pyrophyllite) in terms of their efficiency in wastewater treatment. Different analytical techniques, such as XRD diffraction (XRD), Fourier Transform Infrared spectroscopy (FTIR), N2 adsorption isotherms, and Scanning Electron Microscopy (SEM) with Energy Dispersive X-ray (EDX) were used to characterize these natural materials. The adsorption properties were studied by optimizing different experimental factors, such as type of adsorbent, adsorbent mass, and dye concentration by the Box–Behnken Design model, using methylene blue (MB) and crystal violet (CV) compounds as organic pollutants. The obtained kinetic data were examined using the pseudo-first and pseudo-second order equations, and the equilibrium adsorption data were studied using the Freundlich and Langmuir models. The adsorption behavior of the different adsorbents was perfectly fitted by the pseudo-second order kinetic model and the Langmuir isotherm. The most efficient adsorbent for both dyes was AGO-1 due to the presence of the cellulose molecules, with qm equal to 40.5 and 16.0 mg/g for CV and MB, respectively. This study confirms the possibility of employing AMD precipitates to adsorb organic pollutants in water, providing valuable information for developing future affordable solutions to reduce the wastes associated with mining activity.
Open AccessAcid Mine Drainage Precipitates from Mining Effluents as Adsorbents of Organic Pollutants for Water Treatment
Acid mine drainage (AMD) is one of the main environmental problems associated with mining activity, whether the mine is operational or abandoned. In this work, several precipitates from this mine drainage generated by the oxidation of sulfide minerals, when exposed to weathering, were used as adsorbents. Such AMD precipitates from abandoned Portuguese mines (AGO, AGO-1, CF, and V9) were compared with two raw materials from Morocco (ClayMA and pyrophyllite) in terms of their efficiency in wastewater treatment. Different analytical techniques, such as XRD diffraction (XRD), Fourier Transform Infrared spectroscopy (FTIR), N2 adsorption isotherms, and Scanning Electron Microscopy (SEM) with Energy Dispersive X-ray (EDX) were used to characterize these natural materials. The adsorption properties were studied by optimizing different experimental factors, such as type of adsorbent, adsorbent mass, and dye concentration by the Box–Behnken Design model, using methylene blue (MB) and crystal violet (CV) compounds as organic pollutants. The obtained kinetic data were examined using the pseudo-first and pseudo-second order equations, and the equilibrium adsorption data were studied using the Freundlich and Langmuir models. The adsorption behavior of the different adsorbents was perfectly fitted by the pseudo-second order kinetic model and the Langmuir isotherm. The most efficient adsorbent for both dyes was AGO-1 due to the presence of the cellulose molecules, with qm equal to 40.5 and 16.0 mg/g for CV and MB, respectively. This study confirms the possibility of employing AMD precipitates to adsorb organic pollutants in water, providing valuable information for developing future affordable solutions to reduce the wastes associated with mining activity.
- Open Access
- 18 July 2024
- Published by Elsevier in Chemical Engineering Science
- Vol. 300
From waste to value: Electrocatalytic reduction of nitrate into ammonia at mono and bimetallic-CNT modified electrodes
- 18 July 2024
- Published by Elsevier in Chemical Engineering Science
- Vol. 300
Open AccessFrom waste to value: Electrocatalytic reduction of nitrate into ammonia at mono and bimetallic-CNT modified electrodes
- Open Access
Cisplatin-Resistant Urothelial Bladder Cancer Cells Undergo Metabolic Reprogramming beyond the Warburg Effect
Advanced urothelial bladder cancer (UBC) patients are tagged by a dismal prognosis and high mortality rates, mostly due to their poor response to standard-of-care platinum-based therapy. Mediators of chemoresistance are not fully elucidated. This work aimed to study the metabolic profile of advanced UBC, in the context of cisplatin resistance. Three isogenic pairs of parental cell lines (T24, HT1376 and KU1919) and the matching cisplatin-resistant (R) sublines were used. A set of functional assays was used to perform a metabolic screening on the cells. In comparison to the parental sublines, a tendency was observed towards an exacerbated glycolytic metabolism in the cisplatin-resistant T24 and HT1376 cells; this glycolytic phenotype was particularly evident for the HT1376/HT1376R pair, for which the cisplatin resistance ratio was higher. HT1376R cells showed decreased basal respiration and oxygen consumption associated with ATP production; in accordance, the extracellular acidification rate was also higher in the resistant subline. Glycolytic rate assay confirmed that these cells presented higher basal glycolysis, with an increase in proton efflux. While the results of real-time metabolomics seem to substantiate the manifestation of the Warburg phenotype in HT1376R cells, a shift towards distinct metabolic pathways involving lactate uptake, lipid biosynthesis and glutamate metabolism occurred with time. On the other hand, KU1919R cells seem to engage in a metabolic rewiring, recovering their preference for oxidative phosphorylation. In conclusion, cisplatin-resistant UBC cells seem to display deep metabolic alterations surpassing the Warburg effect, which likely depend on the molecular signature of each cell line.
Open AccessCisplatin-Resistant Urothelial Bladder Cancer Cells Undergo Metabolic Reprogramming beyond the Warburg Effect
Advanced urothelial bladder cancer (UBC) patients are tagged by a dismal prognosis and high mortality rates, mostly due to their poor response to standard-of-care platinum-based therapy. Mediators of chemoresistance are not fully elucidated. This work aimed to study the metabolic profile of advanced UBC, in the context of cisplatin resistance. Three isogenic pairs of parental cell lines (T24, HT1376 and KU1919) and the matching cisplatin-resistant (R) sublines were used. A set of functional assays was used to perform a metabolic screening on the cells. In comparison to the parental sublines, a tendency was observed towards an exacerbated glycolytic metabolism in the cisplatin-resistant T24 and HT1376 cells; this glycolytic phenotype was particularly evident for the HT1376/HT1376R pair, for which the cisplatin resistance ratio was higher. HT1376R cells showed decreased basal respiration and oxygen consumption associated with ATP production; in accordance, the extracellular acidification rate was also higher in the resistant subline. Glycolytic rate assay confirmed that these cells presented higher basal glycolysis, with an increase in proton efflux. While the results of real-time metabolomics seem to substantiate the manifestation of the Warburg phenotype in HT1376R cells, a shift towards distinct metabolic pathways involving lactate uptake, lipid biosynthesis and glutamate metabolism occurred with time. On the other hand, KU1919R cells seem to engage in a metabolic rewiring, recovering their preference for oxidative phosphorylation. In conclusion, cisplatin-resistant UBC cells seem to display deep metabolic alterations surpassing the Warburg effect, which likely depend on the molecular signature of each cell line.