Cristina Corti
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Cristina Corti has a total of 131 co-authors. Here are the top co-authors by number of shared publications:
- Laura Rampazzi
Dipartimento di Scienze Umane e dell’Innovazione per il Territorio, Università degli Studi dell’Insubria, Via Sant’Abbondio 12, 22100 Como, Italy
25 shared publications - Sandro Recchia
Department of Science and High Technology, University of Insubria, Via Valleggio 11, 22100 Como, Italy
10 shared publications - Antonio Sansonetti
Institute for Heritage Science, National Research Council, ISPC—CNR Milan Unit, 20154 Milan, Italy
9 shared publications Laura Rampazzi
Department of Human Sciences and Innovation for the Territory, University of Insubria, via Sant’Abbondio 12, 22100 Como, Italy
8 shared publications- Ludovico Geminiani
Dipartimento di Scienza e Alta Tecnologia, Universitá degli Studi dell’Insubria, via Valleggio 11, 22100 Como, Italy
8 shared publications - Valentina Brunello
Dipartimento di Scienza e Alta Tecnologia, Universitá degli Studi dell’Insubria, via Valleggio 11, 22100 Como, Italy
6 shared publications
Latest Publications
- Open Access
Challenging proteomic identification of animal species in historical leather from Japanese Samurai armors
- Open Access
- 15 September 2025
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 59 (38) , 20738-20747
Forest Filter Effect Revisited: First Evidence That Polycyclic Aromatic Hydrocarbon Metabolites Are Produced on Leaves by Biodegradation and Photodegradation
Plants are considered "nature-based solutions" for the improvement of air quality. Through the so-called forest filter effect (FFE), they can remove both gas and particulate matter (PM) associated organic contaminants, such as polycyclic aromatic hydrocarbons (PAHs) from air, reducing their concentrations. In this work, new aspects of FFE were investigated through several laboratory experiments of increasing complexity. More specifically, the study was designed to evaluate for the first time the contribution of light and phyllosphere microbial communities of Quercus ilex leaves to the degradation of deuterated PAHs (naphthalene-d8, acenaphthene-d10, phenanthrene-d10, pyrene-d10, chrysene-d12, and perylene-d12). Such degradation was investigated by observing the production of deuterated PAH hydroxy metabolites (OH-PAHs). OH-PAHs were produced in both light and dark conditions, while their appearance in sterile controls was negligible, highlighting the importance of leaf-associated microorganisms in the degradation of parent PAH. The number of PAH metabolites and their isomers increased when entire leaves were used rather than the inoculated phyllosphere microorganisms only, confirming the degradation ability of native phyllosphere microbial communities. Although preliminary, these results showed that FFE can be enhanced by photo- and biodegradation processes. The continuous removal of PAHs through degradation could result in an enhanced PAH concentration gradient and flux of deposition to leaves.
- 15 September 2025
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 59 (38) , 20738-20747
Open AccessForest Filter Effect Revisited: First Evidence That Polycyclic Aromatic Hydrocarbon Metabolites Are Produced on Leaves by Biodegradation and Photodegradation
Plants are considered "nature-based solutions" for the improvement of air quality. Through the so-called forest filter effect (FFE), they can remove both gas and particulate matter (PM) associated organic contaminants, such as polycyclic aromatic hydrocarbons (PAHs) from air, reducing their concentrations. In this work, new aspects of FFE were investigated through several laboratory experiments of increasing complexity. More specifically, the study was designed to evaluate for the first time the contribution of light and phyllosphere microbial communities of Quercus ilex leaves to the degradation of deuterated PAHs (naphthalene-d8, acenaphthene-d10, phenanthrene-d10, pyrene-d10, chrysene-d12, and perylene-d12). Such degradation was investigated by observing the production of deuterated PAH hydroxy metabolites (OH-PAHs). OH-PAHs were produced in both light and dark conditions, while their appearance in sterile controls was negligible, highlighting the importance of leaf-associated microorganisms in the degradation of parent PAH. The number of PAH metabolites and their isomers increased when entire leaves were used rather than the inoculated phyllosphere microorganisms only, confirming the degradation ability of native phyllosphere microbial communities. Although preliminary, these results showed that FFE can be enhanced by photo- and biodegradation processes. The continuous removal of PAHs through degradation could result in an enhanced PAH concentration gradient and flux of deposition to leaves.
- Open Access
Identification of Materials and Kirazuri Decorative Technique in Japanese Ukiyo-e Prints Using Non-Invasive Spectroscopic Tools
Ten ukiyo-e woodblock prints from the collection of the Museo delle Culture in Lugano (Switzerland) were analyzed to identify the materials used in their production. These Japanese artworks were traditionally created with colors derived from minerals and plants, mixed with diluted animal glue and applied to paper using wooden matrices. Due to their fragility, non-invasive external reflection infrared spectroscopy and imaging analysis were employed. Spectral data were compared with reference samples of Japanese pigments and existing literature, reflecting the growing interest in the characterization of ukiyo-e prints. Within the limits of the non-invasive approach, several colorants were identified, including akane (madder), suo (sappanwood), yamahaji (Japanese sumac), kariyasu (Eulalia), and kio (orpiment), along with a proteinaceous binding medium. The extensive use of bero-ai (Prussian blue), applied both as a pure pigment and in mixtures, was confirmed. Notably, mica was detected in the background of one print, providing the first analytical evidence of the kirazuri decorative technique, which produces a sparkling, silver-like effect. Ultraviolet-induced fluorescence imaging further contributed to the assessment of conservation status, revealing faded decorative motifs and signs of previous water damage.
Open AccessIdentification of Materials and Kirazuri Decorative Technique in Japanese Ukiyo-e Prints Using Non-Invasive Spectroscopic Tools
Ten ukiyo-e woodblock prints from the collection of the Museo delle Culture in Lugano (Switzerland) were analyzed to identify the materials used in their production. These Japanese artworks were traditionally created with colors derived from minerals and plants, mixed with diluted animal glue and applied to paper using wooden matrices. Due to their fragility, non-invasive external reflection infrared spectroscopy and imaging analysis were employed. Spectral data were compared with reference samples of Japanese pigments and existing literature, reflecting the growing interest in the characterization of ukiyo-e prints. Within the limits of the non-invasive approach, several colorants were identified, including akane (madder), suo (sappanwood), yamahaji (Japanese sumac), kariyasu (Eulalia), and kio (orpiment), along with a proteinaceous binding medium. The extensive use of bero-ai (Prussian blue), applied both as a pure pigment and in mixtures, was confirmed. Notably, mica was detected in the background of one print, providing the first analytical evidence of the kirazuri decorative technique, which produces a sparkling, silver-like effect. Ultraviolet-induced fluorescence imaging further contributed to the assessment of conservation status, revealing faded decorative motifs and signs of previous water damage.
- Open Access
Investigation on Tattoo Ink (Hexadecachlorinate Copper Phthalocyanine) Removal: Novel Chemical and Biological Approach
Tattoos have been a ubiquitous phenomenon throughout history. Now, the demand for tattoo removal for aesthetic or practical reasons is growing rapidly. This study outlines the results of field investigations into the chemical and biological removal of tattoo inks (Hexadecachlorinate copper phthalocyanine—C32Cl16CuN8—CAS no° 1328-53-6). FTIR, Py-GC/MS, and NMR analyses yielded intriguing profiles pertaining to the primary chemical constituents, along with others of an ambiguous nature. A bioremoval protocol was developed on a pork rind surface to simulate human tattooing. Two previously studied microbial strains were included in this analysis: (i) a bacterial culture of Pseudomonas stutzeri 5190 DSMZ viable cells and (ii) a fungal culture of Alternaria infectoria strain NIS4, the latter already isolated and identified. A combination of physical, chemical, and microbiological analyses, along with microscopic observations, was conducted. In our experimental conditions, inocula from environmental samples (soil and compost) were capable of inducing changes in even trace organic matter (glycerin and additives in pigments) used as a binder in emulsifiers in tattoo inks. Furthermore, the two microbial strains demonstrated promising potential for removing green tattoo ink. Finally, wastewater effluents containing green ink were recovered via electrochemical treatment, and the environmental impact in terms of the CO2 equivalent of our experiments was assessed. The results are promising and warrant further investigation into the innovative biological and chemical removal of tattoo inks from human skin and wastewater, respectively.
Open AccessInvestigation on Tattoo Ink (Hexadecachlorinate Copper Phthalocyanine) Removal: Novel Chemical and Biological Approach
Tattoos have been a ubiquitous phenomenon throughout history. Now, the demand for tattoo removal for aesthetic or practical reasons is growing rapidly. This study outlines the results of field investigations into the chemical and biological removal of tattoo inks (Hexadecachlorinate copper phthalocyanine—C32Cl16CuN8—CAS no° 1328-53-6). FTIR, Py-GC/MS, and NMR analyses yielded intriguing profiles pertaining to the primary chemical constituents, along with others of an ambiguous nature. A bioremoval protocol was developed on a pork rind surface to simulate human tattooing. Two previously studied microbial strains were included in this analysis: (i) a bacterial culture of Pseudomonas stutzeri 5190 DSMZ viable cells and (ii) a fungal culture of Alternaria infectoria strain NIS4, the latter already isolated and identified. A combination of physical, chemical, and microbiological analyses, along with microscopic observations, was conducted. In our experimental conditions, inocula from environmental samples (soil and compost) were capable of inducing changes in even trace organic matter (glycerin and additives in pigments) used as a binder in emulsifiers in tattoo inks. Furthermore, the two microbial strains demonstrated promising potential for removing green tattoo ink. Finally, wastewater effluents containing green ink were recovered via electrochemical treatment, and the environmental impact in terms of the CO2 equivalent of our experiments was assessed. The results are promising and warrant further investigation into the innovative biological and chemical removal of tattoo inks from human skin and wastewater, respectively.
- Open Access
Looking at the Modern to Better Understand the Ancient: Is It Possible to Differentiate Mars Pigments from Archaeological Ochres?
This article offers a discussion of the possibility of distinguishing ochres from Mars pigments. The discussion addresses technological, archaeological, and artistic aspects. Natural earth pigments such as ochres, siennas, and umbers have been widely used from the Paleolithic to the present day and still find wide application despite the development of synthetic iron oxide pigment synthesis processes, called Mars pigments. The potential ability of today’s analytical techniques to distinguish between two classes of pigments of the same color with very similar chemical composition—but perhaps sufficient for reliable recognition—is also discussed. The paper begins by addressing the proper use of the terms “ochres” and “Mars pigments” and their accurate identification in artworks. It reviews the literature on the chemical–mineralogical characterization of yellow and red iron pigments and analyzes pigment catalogs to understand how companies distinguish ochres from Mars pigments. An experimental analysis using External Reflection Infrared Spectroscopy (FTIR-ER) compared painting samples made with natural ochres and Mars pigments, confirming the literature findings and suggesting future research directions. Key differences such as hematite in yellow ochres and specific spectral peaks in red ochres support the potential of FTIR-ER spectroscopy as a noninvasive tool for distinguishing pigments, especially for fragile artifacts and archaeological applications.
Open AccessLooking at the Modern to Better Understand the Ancient: Is It Possible to Differentiate Mars Pigments from Archaeological Ochres?
This article offers a discussion of the possibility of distinguishing ochres from Mars pigments. The discussion addresses technological, archaeological, and artistic aspects. Natural earth pigments such as ochres, siennas, and umbers have been widely used from the Paleolithic to the present day and still find wide application despite the development of synthetic iron oxide pigment synthesis processes, called Mars pigments. The potential ability of today’s analytical techniques to distinguish between two classes of pigments of the same color with very similar chemical composition—but perhaps sufficient for reliable recognition—is also discussed. The paper begins by addressing the proper use of the terms “ochres” and “Mars pigments” and their accurate identification in artworks. It reviews the literature on the chemical–mineralogical characterization of yellow and red iron pigments and analyzes pigment catalogs to understand how companies distinguish ochres from Mars pigments. An experimental analysis using External Reflection Infrared Spectroscopy (FTIR-ER) compared painting samples made with natural ochres and Mars pigments, confirming the literature findings and suggesting future research directions. Key differences such as hematite in yellow ochres and specific spectral peaks in red ochres support the potential of FTIR-ER spectroscopy as a noninvasive tool for distinguishing pigments, especially for fragile artifacts and archaeological applications.
- Open Access
- 16 October 2024
- Published by Elsevier in Chemosphere
- Vol. 366, 143553
Evaluation of the Adriatic Sea pollution using mesozooplankton as an environmental indicator
- 16 October 2024
- Published by Elsevier in Chemosphere
- Vol. 366, 143553
Open AccessEvaluation of the Adriatic Sea pollution using mesozooplankton as an environmental indicator
- Open Access
New Evidence of Traditional Japanese Dyeing Techniques: A Spectroscopic Investigation
The Japanese textile tradition is renowned for its intricate designs achieved through a variety of dyeing techniques, including kasuri, shibori, and paste-resist dyeing. These techniques are often combined within a single textile, resulting in exceptionally elaborate creations. Our paper delves into the technical aspects and complexities of these methods, highlighting the dynamic interplay between tradition and innovation in Japanese textile production. Our scientific endeavour focused on some textiles dating between the 19th and 20th centuries and belonging to the Montgomery Collection of Japanese folk art. Employing non-invasive techniques such as visible reflectance spectroscopy and ER-FTIR spectroscopy, we uncovered key insights into the materials and methods utilized in the creation of these textiles. Our analysis revealed a diverse array of pigments and dyes, including plant-derived, inorganic, and synthetic variants. These findings illuminate the cultural syncretism between traditional Japanese practices and the adoption of new materials from the West, underscoring the dynamic nature of textile production in Japan. Furthermore, ER-FTIR spectroscopy elucidated the predominant use of cotton as the primary fibre in the textiles, aligning with historical records of Japan’s role as a major producer of cotton yarn. Analysis of white areas within the textiles revealed evidence of resist-paste dyeing techniques, particularly tsutsugaki and katazome, through the absence of dye penetration and the characteristic appearance of white lines. Confirmation of indigo dyeing techniques (aizome) was achieved through ER-FTIR spectroscopy, providing reliable identification of indigo and Prussian blue in various shades of blue present in the textiles. Additionally, the detection of Western-derived dyeing method (utsushi-yūzen) and free-hand painting (kaki-e), offers insights into the diversity of dyeing practices employed by Japanese artisans. The presence of proteinaceous materials and synthetic dyes observed in some textiles has implications for conservation practices, suggesting the need for tailored approaches to ensure the preservation of these culturally significant artifacts. Overall, these scientific results shed new light on the materials, techniques, and cultural contexts underlying Japanese textile production, advancing our understanding of this rich artistic heritage and informing future research endeavours in textile science and conservation.
Open AccessNew Evidence of Traditional Japanese Dyeing Techniques: A Spectroscopic Investigation
The Japanese textile tradition is renowned for its intricate designs achieved through a variety of dyeing techniques, including kasuri, shibori, and paste-resist dyeing. These techniques are often combined within a single textile, resulting in exceptionally elaborate creations. Our paper delves into the technical aspects and complexities of these methods, highlighting the dynamic interplay between tradition and innovation in Japanese textile production. Our scientific endeavour focused on some textiles dating between the 19th and 20th centuries and belonging to the Montgomery Collection of Japanese folk art. Employing non-invasive techniques such as visible reflectance spectroscopy and ER-FTIR spectroscopy, we uncovered key insights into the materials and methods utilized in the creation of these textiles. Our analysis revealed a diverse array of pigments and dyes, including plant-derived, inorganic, and synthetic variants. These findings illuminate the cultural syncretism between traditional Japanese practices and the adoption of new materials from the West, underscoring the dynamic nature of textile production in Japan. Furthermore, ER-FTIR spectroscopy elucidated the predominant use of cotton as the primary fibre in the textiles, aligning with historical records of Japan’s role as a major producer of cotton yarn. Analysis of white areas within the textiles revealed evidence of resist-paste dyeing techniques, particularly tsutsugaki and katazome, through the absence of dye penetration and the characteristic appearance of white lines. Confirmation of indigo dyeing techniques (aizome) was achieved through ER-FTIR spectroscopy, providing reliable identification of indigo and Prussian blue in various shades of blue present in the textiles. Additionally, the detection of Western-derived dyeing method (utsushi-yūzen) and free-hand painting (kaki-e), offers insights into the diversity of dyeing practices employed by Japanese artisans. The presence of proteinaceous materials and synthetic dyes observed in some textiles has implications for conservation practices, suggesting the need for tailored approaches to ensure the preservation of these culturally significant artifacts. Overall, these scientific results shed new light on the materials, techniques, and cultural contexts underlying Japanese textile production, advancing our understanding of this rich artistic heritage and informing future research endeavours in textile science and conservation.
- Open Access
- 17 February 2024
- Published by Elsevier in Journal of Cultural Heritage
- Vol. 67, 9-22
Historical silks: a novel method to evaluate their condition with ATR-FTIR spectroscopy and Principal Component Analysis
- 17 February 2024
- Published by Elsevier in Journal of Cultural Heritage
- Vol. 67, 9-22
Open AccessHistorical silks: a novel method to evaluate their condition with ATR-FTIR spectroscopy and Principal Component Analysis
- Open Access
- 3 February 2024
- Published by Elsevier in Journal of Cultural Heritage
- Vol. 66, 572-583
Ancient bread recipes: Archaeometric data on charred findings
- 3 February 2024
- Published by Elsevier in Journal of Cultural Heritage
- Vol. 66, 572-583
Open AccessAncient bread recipes: Archaeometric data on charred findings
- Open Access
Historical Silk: A Novel Method to Evaluate Degumming with Non-Invasive Infrared Spectroscopy and Spectral Deconvolution
To correctly manage a collection of historical silks, it is important to detect if the yarn has been originally subjected to degumming. This process is generally applied to eliminate sericin; the obtained fiber is named soft silk, in contrast with hard silk which is unprocessed. The distinction between hard and soft silk gives both historical information and useful indications for informed conservation. With this aim, 32 samples of silk textiles from traditional Japanese samurai armors (15th–20th century) were characterized in a non-invasive way. ATR-FTIR spectroscopy has been previously used to detect hard silk, but data interpretation is challenging. To overcome this difficulty, an innovative analytical protocol based on external reflection FTIR (ER-FTIR) spectroscopy was employed, coupled with spectral deconvolution and multivariate data analysis. The ER-FTIR technique is rapid, portable, and widely employed in the cultural heritage field, but rarely applied to the study of textiles. The ER-FTIR band assignment for silk was discussed for the first time. Then, the evaluation of the OH stretching signals allowed for a reliable distinction between hard and soft silk. Such an innovative point of view, which exploits a “weakness” of FTIR spectroscopy—the strong absorption from water molecules—to indirectly obtain the results, can have industrial applications too.
Open AccessHistorical Silk: A Novel Method to Evaluate Degumming with Non-Invasive Infrared Spectroscopy and Spectral Deconvolution
To correctly manage a collection of historical silks, it is important to detect if the yarn has been originally subjected to degumming. This process is generally applied to eliminate sericin; the obtained fiber is named soft silk, in contrast with hard silk which is unprocessed. The distinction between hard and soft silk gives both historical information and useful indications for informed conservation. With this aim, 32 samples of silk textiles from traditional Japanese samurai armors (15th–20th century) were characterized in a non-invasive way. ATR-FTIR spectroscopy has been previously used to detect hard silk, but data interpretation is challenging. To overcome this difficulty, an innovative analytical protocol based on external reflection FTIR (ER-FTIR) spectroscopy was employed, coupled with spectral deconvolution and multivariate data analysis. The ER-FTIR technique is rapid, portable, and widely employed in the cultural heritage field, but rarely applied to the study of textiles. The ER-FTIR band assignment for silk was discussed for the first time. Then, the evaluation of the OH stretching signals allowed for a reliable distinction between hard and soft silk. Such an innovative point of view, which exploits a “weakness” of FTIR spectroscopy—the strong absorption from water molecules—to indirectly obtain the results, can have industrial applications too.