Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Toshihiko Sugiura has a total of 100 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Validation of a Data-Driven Approach for Predicting Auto-Parametric Resonance in a Superconducting Magnetic Levitation System

    by Taiga Miyahara, Toshihiko Sugiura

    This study deals with prediction of the occurrence of nonlinear resonance in a superconducting magnetic levitation system using a data-driven approach. The advantages of this system are that its energy loss due to friction is small, and it can levitate stably without control. Thus, this system is expected to be applied to transportation and energy storage, such as magnetic levitation trains and flywheels. However, due to the low damping of the system and the nonlinearity of the magnetic force, small amplitude vibrations may suddenly become unstable and transition to large amplitude vibrations. Since such nonlinear resonance phenomena pose a risk in the operation of practical applications, it is important to accurately predict the resonance. However, precise modeling of the system is challenging due to errors between analytical expressions and experimental measurements of the magnetic force. On the other hand, recently, a data-driven approach for predicting resonance in nonlinear dynamics has been developed. Therefore, we attempted to apply this approach to superconducting magnetic levitation systems. In this study, we used this approach based on bifurcation theory. Bifurcation is a qualitative change in a system's state as parameters vary. According to this theory, as the system approaches resonance, characteristic changes in the time histories of displacement, such as reductions in the damping coefficient and the difference between the two frequency components can be observed. In this study, we focused on the nonlinear resonance phenomenon called auto-parametric resonance, in which vibration energy is transferred between vibration modes in a multi-degree-of-freedom superconducting magnetic levitation system. We analyzed the equation of motion and showed that the above-mentioned characteristics near the resonance point were confirmed by numerical calculations and experiments. These results suggest that monitoring these characteristics using data-driven methods is effective for predicting nonlinear resonance in superconducting magnetic levitation systems.


  • Improvement of Vibration Suppression and Capturing Performance Using Electromagnetic Shunt Damper in Superconducting Magnetic Docking System

    by Shinji Eto, Toshihiko Sugiura

    This study deals with the effect of an electromagnetic shunt damper on the vibration suppression and capturing performance of the superconducting magnetic docking system. It utilizes the property of a superconductor to hold a magnet in an equilibrium position due to the magnetic flux pinning effect. This system enables non-contact and non-controlled docking, reducing energy consumption and impact compared to conventional systems. However, there are problems such as the possibility of docking failure and the large free vibration during docking due to the low damping to the magnet. The important factors affecting the vibration suppression and capturing performance of superconducting magnetic docking systems are the damping characteristics and potential energy distribution, and it is important to improve these factors. We have focused on electromagnetic shunt dampers as a way to increase the damping of the system. The electromagnetic shunt damper is a type of dynamic absorber that has an electric circuit consisting of a coil, resistor, and capacitor in the subsystem. By converting the kinetic energy of the main system into electrical energy of the subsystem, vibration damping can be increased. The potential energy distribution of a superconductor shows asymmetry with respect to the equilibrium position of the magnet due to hysteresis, but this is not taken into account in the advanced mirror image method. Therefore, the capturing performance could not be calculated by numerical analysis, but we have devised a new mirror image model that takes the asymmetry into account. In this study, we investigate the effect of parameters in an electromagnetic shunt damper on the damping characteristics and capturing performance of the superconducting magnetic docking system by numerical analysis.

  • Open Access

    Macitentan Administration for Pulmonary Hypertension Due to β-thalassemia with Multiple Organ Failure

    by Kento Takagi, Hajime Kasai, Hiroyuki Tani, Seiichiro Sakao, Toshihiko Sugiura, Takuji Suzuki

    A 51-year-old Thai woman diagnosed with β-thalassemia underwent regular blood transfusion and iron-chelating therapy. However, after voluntarily discontinuing treatment, the patient developed progressive dyspnea and was diagnosed with pulmonary hypertension following right heart catheterization. Despite resuming blood transfusions, her condition did not improve. Because the patient had a history of multiple organ failure, curative treatment for β-thalassemia was not feasible, and macitentan was administered. Despite experiencing hypotension as an adverse event, her condition remained stable during macitentan treatment. Thus, macitentan may be well tolerated in patients with pulmonary hypertension caused by β-thalassemia with multiple organ dysfunction.

  • Vibration Modal Analysis of Superconducting Levitation With LCR Shunt Damper

    by Koyo Kimura, Toshihiko Sugiura

    This study deals with the vibration suppression effect of an LCR parallel electromagnetic shunt damper on a superconducting magnetic levitation system. Superconducting magnetic levitation systems have the advantages of low energy loss due to friction because of the non-contact nature of the system and, furthermore, stable levitation without control. Therefore, it is expected to be applied to magnetically levitated trains and magnetic formation flights. On the other hand, the occurrence of resonance with large amplitude due to low attenuation can be a problem, so suppression of the amplitude is an important issue. We focused on the LCR electromagnetic shunt damper, which has the advantage of being non-contact, as a method of suppressing vibration. However, the coupling of the mechanical and electrical systems via a velocity term is essential for the parallel type, making conventional modal analysis inapplicable. Therefore, we used the impedance expression for the circuit equation of the subsystem. As a result, the velocity term coupling was eliminated, thereby allowing the application of conventional modal analysis. The analysis showed that the two natural frequencies depend on the excitation frequency, and based on this fact, the dependence of the frequency response of the system on the capacitance and the resistance was able to be determined by numerical analysis. Furthermore, the amplitude reduction effect predicted by this numerical analysis was confirmed experimentally. In summary, in this study, the vibration suppression of the superconducting magnetic levitation system by the LCR electromagnetic shunt damper was analyzed using vibration modal analysis and verified experimentally.


  • Effect of Gyroscopic Damper on Secondary Resonance of Superconducting Levitation

    by Hiroki Minato, Toshihiko Sugiura

    This study aims to verify the effectiveness of a gyroscopic damper on the nonlinear resonances of a magnetic levitation system with superconductors at several resonance points. Magnetic levitation systems using high-temperature superconductors provide controlled and stable levitation, but because they are non-contact, they have low damping and are easily affected by external disturbances. In addition, the magnetic force of superconductivity tends to cause nonlinear vibrations, and reducing these vibrations is an important development issue from the perspective of structural safety in system adaptation. We focus on the use of gyroscopic damper as a passive vibration suppression method that takes advantage of the property of the superconducting magnetic levitation system to be stable without control. Our previous studies have shown that gyroscopic damper is effective for simultaneous vibration suppression in the translational and tilting directions by optimizing the setting parameters of the gyroscopic damper. The vibration suppression effect in primary resonance has also been theoretically and experimentally confirmed. In this study, in addition to a reduction of approximately 10% in both the translational and tilting directions with respect to the excitation frequency component of secondary resonance, it was confirmed that the amplitude of what appears to be a subharmonic component oscillating at 1/2 and 3/2 of the excitation frequency was reduced by almost 100%. Thus, it was demonstrated that the gyroscopic damper can suppress secondary resonance in addition to primary resonance.

  • Open Access

    Vibration Suppression of Superconducting Magnetic Levitation System by LCR Parallel Electromagnetic Shunt Damper

    by Koyo Kimura, Toshihiko Sugiura

    Although superconducting magnetic levitation systems are capable of stable levitation without control, vibration suppression is required due to low damping. One possible way to achieve this is to use an electromagnetic shunt damper with an LCR electrical circuit. However, the direct application of conventional modal analysis is difficult for the LCR parallel type because of the significant velocity term coupling in the circuit equations of the subsystem. Our previous study proposed a method to effectively reduce the amplitude of the main system by applying non-classical modal analysis, which also takes the velocity term into account. On the other hand, in the present study, the impedance expression of the subsystem is used to eliminate the velocity term coupling, allowing the application of conventional classical modal analysis. This study investigates the effect of parameter values on resonance, comparing the results of this classical and nonclassical modal analysis.

  • Open Access

    Influence of Resonance Frequency Change on Vibration Damping Properties of Metamaterials Consisting of Coupled Electrical and Structural Vibration Systems

    by Kyogo Sato, Keisuke Nishida, Toshihiko Sugiura

    Acoustic metamaterials are artificial materials designed to passively attenuate waves in the resonant frequency range by periodically placing resonant structures in the material that are sufficiently smaller than the propagating wavelength. In general, acoustic metamaterial research often suppresses the propagation of elastic waves by means of mechanical local resonant structures. In this study, however, the local resonant structure is replaced by an electrical system to create a coupled electrical/structural vibration system to reduce vibration near the resonant frequency. Numerical simulations using the finite element method were performed to investigate the change in the vibration of elastic waves propagating through a plate in the ultrasonic range when the resonance frequency of the local resonance structure of the electrical system is changed.

  • Open Access

    Relationship between Vibration Damping Effect and Excitation Amplitude of Superconducting Magnetic Levitation System by Gyroscopic Damper

    by Hiroki Minato, Toshihiko Sugiura

    In this study, the relationship between the vibration suppression effect of a gyroscopic damper and the excitation amplitude when a system supported elastically by a superconducting magnetic levitation system is subjected to vibration was investigated through numerical calculations and experiments. While superconducting magnetic levitation systems are capable of uncontrolled and stable levitation, they are prone to nonlinear vibrations caused by magnetic forces due to their non-contact and low damping. We have found that the use of a gyroscopic damper may be effective in simultaneously suppressing translational and tilting vibrations. Experimental results showed that the vibration suppression effect was weakened when the excitation amplitude was increased, and that the waveform had nonlinearity. In this report, the resonance characteristics of a superconducting magnetic levitation system and the possible effects of the vibration damping effect of the gyroscopic damper on the vibration amplitude are evaluated.

  • Experimental Verification of the Suppression Effect of a Gyroscopic Damper on Nonlinear Resonance in a High-Temperature Superconducting Magnetic Levitation System

    by Hiroki Minato, Kentaro Fujita, Toshihiko Sugiura

    This paper presents experimental verification of the vibration suppression effect of a gyroscopic damper on a system supported elastically by a superconducting magnetic levitation system when subjected to vibration. While superconducting magnetic levitation systems are capable of uncontrolled and stable levitation, they are prone to multi-degree-of-freedom vibration and nonlinear vibration of the levitating body due to their low damping. In our previous study, we have numerically predicted that a gyroscopic damper, a passive vibration control method, may be effective in simultaneously suppressing translational and tilting vibrations by optimizing the design parameters. In this paper, this vibration suppression effect predicted was investigated through experiments. In the experiment, nonlinear vibration of the levitating body occurred, which may have been caused by the magnetic force of the superconductivity, but the motion coupling of the gyroscopic damper and the levitating body was found to reduce that vibration by 30% in the translational direction and by 40% in the tilting direction. The gyroscopic damper was thus demonstrated to be effective in simultaneously suppressing the translational and tilting vibration of the levitating body.