Benjamin Scheibe
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Benjamin Scheibe has a total of 103 co-authors. Here are the top co-authors by number of shared publications:
- Florian Kraus
Anorganische Chemie, Fluorchemie, Universität Bonn, Gerhard-Domagk-Str. 1, 53121 Bonn, Germany
25 shared publications - Antti J. Karttunen
Department of Chemistry and Materials Science, Aalto University, FI-00076 Espoo, Finland
9 shared publications - Joseph M. Sperling
Colorado School of Mines
6 shared publications - Thomas E. Albrecht-Schönzart
Colorado School of Mines
6 shared publications Winfried Petry
Neutron Research Source Heinz Maier‐Leibnitz (FRM II) Fachbereich Chemie Technische Universität München Lichtenbergstraße 1 85748 Garching Germany
6 shared publicationsAntti J. Karttunen
Department of Chemistry and Materials Science Aalto University 00076 Aalto Finland
5 shared publications
Latest Publications
- 4 February 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 147 (7) , 6137-6148
High-Pressure Effects on an Octa-Hydrated Curium Complex: An Experimental and Theoretical Investigation
An octa-hydrated curium compound [Cm(H2O)8](Hdtp)(dtp)·H2O (Cm1, H2dtp = 2,3-di(tetrazol-5-yl)pyrazine) along with its lanthanide analogues [Ln(H2O)8](Hdtp)(dtp)·H2O (Ln1, Ln3+ = La3+-Nd3+, Sm3+-Lu3+) were synthesized and characterized using single crystal X-ray diffraction and spectroscopic methods. Bond length analysis of VIIICm(III)-OH2 (where VIII refers to the coordination number) was compared to VIIILn(III)-OH2 (Ln3+ = Nd3+ and Sm3+), indicating similar VIIIM(III)-OH2 bond lengths because of their similar eight-coordinate ionic radii of these VIIIM(III) cations. Owing to the reduced coordination number, the VIIICm(III)-OH2 bond lengths were shorter than previously reported IXCm(III)-OH2 bonds in [Cm(H2O)9](CF3SO3)3. The octa-aquo complexes were also characterized by solid-state UV-vis-NIR spectroscopy in addition to variable-temperature and variable-pressure photoluminescence. Variable-pressure absorption spectra of Cm1 were compared with Ln1 and show that the Cm(III) f → f transitions have a stronger dependence on pressure than that observed in Ln1 (Ln3+ = Nd3+ and Sm3+). The experimental and computational analyses reveal that the monotonic decrease in the computed energy difference between the ground state and the first excited state corresponds to the observed red shift of the photoluminescence peak. This is accompanied by a gradual reduction in the average Cm(III)-OH2 bond length and a delocalization of spin densities, alongside an intensified interaction involving the 5f orbitals under increasing pressure. These changes accommodate the new geometry and collectively modify the energy landscape, resulting in peak broadening and quenching.
- 4 February 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 147 (7) , 6137-6148
High-Pressure Effects on an Octa-Hydrated Curium Complex: An Experimental and Theoretical Investigation
An octa-hydrated curium compound [Cm(H2O)8](Hdtp)(dtp)·H2O (Cm1, H2dtp = 2,3-di(tetrazol-5-yl)pyrazine) along with its lanthanide analogues [Ln(H2O)8](Hdtp)(dtp)·H2O (Ln1, Ln3+ = La3+-Nd3+, Sm3+-Lu3+) were synthesized and characterized using single crystal X-ray diffraction and spectroscopic methods. Bond length analysis of VIIICm(III)-OH2 (where VIII refers to the coordination number) was compared to VIIILn(III)-OH2 (Ln3+ = Nd3+ and Sm3+), indicating similar VIIIM(III)-OH2 bond lengths because of their similar eight-coordinate ionic radii of these VIIIM(III) cations. Owing to the reduced coordination number, the VIIICm(III)-OH2 bond lengths were shorter than previously reported IXCm(III)-OH2 bonds in [Cm(H2O)9](CF3SO3)3. The octa-aquo complexes were also characterized by solid-state UV-vis-NIR spectroscopy in addition to variable-temperature and variable-pressure photoluminescence. Variable-pressure absorption spectra of Cm1 were compared with Ln1 and show that the Cm(III) f → f transitions have a stronger dependence on pressure than that observed in Ln1 (Ln3+ = Nd3+ and Sm3+). The experimental and computational analyses reveal that the monotonic decrease in the computed energy difference between the ground state and the first excited state corresponds to the observed red shift of the photoluminescence peak. This is accompanied by a gradual reduction in the average Cm(III)-OH2 bond length and a delocalization of spin densities, alongside an intensified interaction involving the 5f orbitals under increasing pressure. These changes accommodate the new geometry and collectively modify the energy landscape, resulting in peak broadening and quenching.
- 2 January 2024
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 63 (2) , 1266-1273
Transformation of Mononuclear Plutonium(III) Tetrazolate Complexes into Dinuclear Complexes in the Solid State
The salt metathesis reaction of Na(pmtz)·H2O [pmtz- = 5-(pyrimidyl)tetrazolate] and PuBr3·nH2O in an aqueous media leads to the formation of the mononuclear compound [Pu(pmtz)3(H2O)3]·(3 + n) H2O (Pu1, n = ∼8) that is isotypic with the lanthanide compounds [Ln(pmtz)3(H2O)3]·(3 + n) H2O (Ln = Ce-Nd). Dissolution and recrystallization of Pu1 in water yields the dinuclear compound {[Pu(pmtz)2(H2O)3]2(μ-pmtz)}2(pmtz)2·14H2O (Pu2), which is isotypic with the lanthanide compounds {[Ln(pmtz)2(H2O)3]2(μ-pmtz)}2(pmtz)2·14H2O (Ln = Nd and Sm). Like their nine-coordinate ionic radii, the M-O and M-N bond lengths in Pu1/Pu2 and Nd1/Nd2, respectively, are within error of one another. The Laporte-forbidden 4f → 4f and 5f → 5f transitions are also assigned in the UV-vis-NIR spectra for these f-element tetrazolate coordination compounds.
- 2 January 2024
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 63 (2) , 1266-1273
Transformation of Mononuclear Plutonium(III) Tetrazolate Complexes into Dinuclear Complexes in the Solid State
The salt metathesis reaction of Na(pmtz)·H2O [pmtz- = 5-(pyrimidyl)tetrazolate] and PuBr3·nH2O in an aqueous media leads to the formation of the mononuclear compound [Pu(pmtz)3(H2O)3]·(3 + n) H2O (Pu1, n = ∼8) that is isotypic with the lanthanide compounds [Ln(pmtz)3(H2O)3]·(3 + n) H2O (Ln = Ce-Nd). Dissolution and recrystallization of Pu1 in water yields the dinuclear compound {[Pu(pmtz)2(H2O)3]2(μ-pmtz)}2(pmtz)2·14H2O (Pu2), which is isotypic with the lanthanide compounds {[Ln(pmtz)2(H2O)3]2(μ-pmtz)}2(pmtz)2·14H2O (Ln = Nd and Sm). Like their nine-coordinate ionic radii, the M-O and M-N bond lengths in Pu1/Pu2 and Nd1/Nd2, respectively, are within error of one another. The Laporte-forbidden 4f → 4f and 5f → 5f transitions are also assigned in the UV-vis-NIR spectra for these f-element tetrazolate coordination compounds.
- 27 March 2023
- Published by Wiley in Chemistry – A European Journal
- Vol. 29 (24)
Double Addition vs. Ring Closure: Systematic Reactivity Study of CO(NCO)2 and CO(NCS)2 towards Hydrogen Halides
- 27 March 2023
- Published by Wiley in Chemistry – A European Journal
- Vol. 29 (24)
Double Addition vs. Ring Closure: Systematic Reactivity Study of CO(NCO)2 and CO(NCS)2 towards Hydrogen Halides
- Open Access
- 22 March 2023
- Published by Wiley in Chemistry – A European Journal
- Vol. 29 (24) , e202203983
Double Addition vs. Ring Closure: Systematic Reactivity Study of CO(NCO)2 and CO(NCS)2 towards Hydrogen Halides
The reactivity of carbonyl diisocyanate, CO(NCO)2, and carbonyl diisothiocyanate, CO(NCS)2 with nucleophiles shows different patterns: Whereas carbonyl diisocyanate adds two equivalents of nucleophile forming carbonyl bis(carbamoylhalides), carbonyl diisothiocyanate only adds one equivalent and undergoes intramolecular ring closure, resulting in the formation of substituted thiadiazines. In this study we have reacted both carbonyl diisocyanate and carbonyl diisothiocyanate with the full series of hydrogen halides HF to HI, isolating carbonyl bis(carbamoylfluoride) (1), ‐chloride (2), ‐bromide (3), and ‐iodide (4) as well as (6‐chloro‐2,3‐dihydro‐2‐thioxo‐4H‐1,3,5‐thiadiazin‐4‐one (5), and 6‐bromo‐2,3‐dihydro‐2‐thioxo‐4H‐1,3,5‐thiadiazin‐4‐one (6). The compounds were analysed by single‐crystal X‐ray diffraction, NMR spectroscopy, IR and Raman spectroscopy, and elemental analysis. Quantum mechanical calculations show thermodynamic reasons for the differences in reactivity.
- 22 March 2023
- Published by Wiley in Chemistry – A European Journal
- Vol. 29 (24) , e202203983
Open AccessDouble Addition vs. Ring Closure: Systematic Reactivity Study of CO(NCO)2 and CO(NCS)2 towards Hydrogen Halides
The reactivity of carbonyl diisocyanate, CO(NCO)2, and carbonyl diisothiocyanate, CO(NCS)2 with nucleophiles shows different patterns: Whereas carbonyl diisocyanate adds two equivalents of nucleophile forming carbonyl bis(carbamoylhalides), carbonyl diisothiocyanate only adds one equivalent and undergoes intramolecular ring closure, resulting in the formation of substituted thiadiazines. In this study we have reacted both carbonyl diisocyanate and carbonyl diisothiocyanate with the full series of hydrogen halides HF to HI, isolating carbonyl bis(carbamoylfluoride) (1), ‐chloride (2), ‐bromide (3), and ‐iodide (4) as well as (6‐chloro‐2,3‐dihydro‐2‐thioxo‐4H‐1,3,5‐thiadiazin‐4‐one (5), and 6‐bromo‐2,3‐dihydro‐2‐thioxo‐4H‐1,3,5‐thiadiazin‐4‐one (6). The compounds were analysed by single‐crystal X‐ray diffraction, NMR spectroscopy, IR and Raman spectroscopy, and elemental analysis. Quantum mechanical calculations show thermodynamic reasons for the differences in reactivity.
- 27 January 2023
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 62 (6) , 2513-2517
Neptunium Alkoxide Chemistry: Expanding Alkoxides to the Transuranium Elements
Two oxo-containing neptunium(IV) tert-butoxides, [Np3O(OtBu)10] (1) and [K4Np2O(OtBu)10] (2), were synthesized using the ligand substitution between neptunium(IV) silylamides and HOtBu, whereas the salt metathesis between [NpCl4(DME)2] (DME = dimethoxyethane) and various amounts of LiOtBu resulted in the formation of oxo-free alkoxides [Np(OtBu)4(py)2] (3; py = pyridine) and [Li(THF)]2[Np(OtBu)6] (4; THF = tetrahydrofuran). These complexes are the first structurally characterized neptunium(IV) alkoxides using single-crystal X-ray diffraction and solid-state absorption spectroscopy, which provide data for the development of anhydrous metal-organic neptunium chemistry.
- 27 January 2023
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 62 (6) , 2513-2517
Neptunium Alkoxide Chemistry: Expanding Alkoxides to the Transuranium Elements
Two oxo-containing neptunium(IV) tert-butoxides, [Np3O(OtBu)10] (1) and [K4Np2O(OtBu)10] (2), were synthesized using the ligand substitution between neptunium(IV) silylamides and HOtBu, whereas the salt metathesis between [NpCl4(DME)2] (DME = dimethoxyethane) and various amounts of LiOtBu resulted in the formation of oxo-free alkoxides [Np(OtBu)4(py)2] (3; py = pyridine) and [Li(THF)]2[Np(OtBu)6] (4; THF = tetrahydrofuran). These complexes are the first structurally characterized neptunium(IV) alkoxides using single-crystal X-ray diffraction and solid-state absorption spectroscopy, which provide data for the development of anhydrous metal-organic neptunium chemistry.
- 22 November 2022
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 61 (48) , 19193-19202
Syntheses and Characterization of Tetrazolate-Based Lanthanide Compounds and Selective Crystallization Separation of Neodymium and Dysprosium
Selective crystallization offers new opportunities for separating neodymium and dysprosium, which are considerably important in permanent magnets. Two water-soluble nitrogen-rich tetrazolate-based ligands, dtp2- (H2dtp = 2,3-di-1H-tetrazol-5-ylpyrazine) and H2ibt- [H3ibt = 4,5-bis(tetrazol-5-yl)imidazole], allow the separation of Nd3+ and Dy3+ through selective crystallization. The reactions of Ln3+ with the ligand Na2(dtp)·2H2O lead to two distinct phases, Na[Ln(dtp)(H2O)8](dtp)·H2O (Lndtp1; Ln = La-Pr) and [Ln(H2O)8](Hdtp)(dtp)·H2O (Lndtp2; Ln = Nd and Sm-Lu). Three different compound types, [Ln(H2ibt)2(H2O)6](H2ibt)·3(H2O) (Lnibt1; Ln = La or Ce), [Ln(H2ibt)(H2O)7](H2ibt)2·4(H2O) (Lnibt2; Ln = Pr or Nd), and [Ln(Hibt)(H2ibt)(H2O)4]·4+x(H2O) (Lnibt3; Ln = Sm-Lu), are obtained from reacting Ln3+ and Na(H2ibt)·3(H2O). Two different phases are observed for Nd(Lnibt2) and Dy(Lnibt3) in the system of H2ibt-, which leads to crystallization-based separation of Nd/Dy with a separation factor of 32 ± 0.7, 10 times higher than that of dtp2-, and a short separation time of 20 s (1 day for dtp2-). The higher performance of H2ibt- compared to that of dtp2- provides guidance for the rational design of water-soluble tetrazolate-derived ligands for selective crystallization.
- 22 November 2022
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 61 (48) , 19193-19202
Syntheses and Characterization of Tetrazolate-Based Lanthanide Compounds and Selective Crystallization Separation of Neodymium and Dysprosium
Selective crystallization offers new opportunities for separating neodymium and dysprosium, which are considerably important in permanent magnets. Two water-soluble nitrogen-rich tetrazolate-based ligands, dtp2- (H2dtp = 2,3-di-1H-tetrazol-5-ylpyrazine) and H2ibt- [H3ibt = 4,5-bis(tetrazol-5-yl)imidazole], allow the separation of Nd3+ and Dy3+ through selective crystallization. The reactions of Ln3+ with the ligand Na2(dtp)·2H2O lead to two distinct phases, Na[Ln(dtp)(H2O)8](dtp)·H2O (Lndtp1; Ln = La-Pr) and [Ln(H2O)8](Hdtp)(dtp)·H2O (Lndtp2; Ln = Nd and Sm-Lu). Three different compound types, [Ln(H2ibt)2(H2O)6](H2ibt)·3(H2O) (Lnibt1; Ln = La or Ce), [Ln(H2ibt)(H2O)7](H2ibt)2·4(H2O) (Lnibt2; Ln = Pr or Nd), and [Ln(Hibt)(H2ibt)(H2O)4]·4+x(H2O) (Lnibt3; Ln = Sm-Lu), are obtained from reacting Ln3+ and Na(H2ibt)·3(H2O). Two different phases are observed for Nd(Lnibt2) and Dy(Lnibt3) in the system of H2ibt-, which leads to crystallization-based separation of Nd/Dy with a separation factor of 32 ± 0.7, 10 times higher than that of dtp2-, and a short separation time of 20 s (1 day for dtp2-). The higher performance of H2ibt- compared to that of dtp2- provides guidance for the rational design of water-soluble tetrazolate-derived ligands for selective crystallization.
- 23 August 2022
- Published by American Chemical Society (ACS) in Crystal Growth & Design
- Vol. 22 (9) , 5504-5510
Selective Crystallization for Green Separations of Lanthanides Using 5-(Pyrimidyl)Tetrazolate
- 23 August 2022
- Published by American Chemical Society (ACS) in Crystal Growth & Design
- Vol. 22 (9) , 5504-5510
Selective Crystallization for Green Separations of Lanthanides Using 5-(Pyrimidyl)Tetrazolate
- Open Access
- 27 April 2022
- Published by Wiley in Zeitschrift für anorganische und allgemeine Chemie
- Vol. 648 (24)
Photochemistry with ClF3 – An Access to [ClOF2]+ Salts
A route to salts of the [ClOF2]+ cation is described that does not require the parent fluoride ClOF3 as a starting material. These can be obtained when either metals such as Cr, Rh, Pd and Au, halides such as PtCl2, SnF2 and PbF4, or oxides such as B2O3, OsO4, GeO2, SnO and Sb2O4 are reacted with ClF3 and additional O2, where necessary, under UV irradiation. Cr, Rh, Pd, PtCl2, GeO2, and SnO formed salts with the respective hexafluoridometallate(IV) anion with the composition [ClOF2]2[MF6]. They crystallize in two distinct structure types in either the monoclinic crystal system (M=Cr, Rh, Ge) or the orthorhombic one (M=Pd, Pt, Sn). The fluorides SnF2 and PbF4 were converted to the monoclinic salts [ClOF2]MF5, and B2O3 formed orthorhombic [ClOF2][BF4]. The triclinic compound ([ClOF2][OsO3F3])2⋅OsF6 was obtained from OsO4 and contains a neutral co‐crystallized OsF6 molecule. A monoclinic double salt with the composition [ClOF2]2[AuF4][SbF6] was obtained by reacting a mixture of Sb2O4 and Au. The compounds were investigated by single crystal X‐ray diffraction and IR and Raman spectroscopy. Quantum‐chemical calculations for the solid‐state allowed for the band assignments of the vibrational spectra.
- 27 April 2022
- Published by Wiley in Zeitschrift für anorganische und allgemeine Chemie
- Vol. 648 (24)
Open AccessPhotochemistry with ClF3 – An Access to [ClOF2]+ Salts
A route to salts of the [ClOF2]+ cation is described that does not require the parent fluoride ClOF3 as a starting material. These can be obtained when either metals such as Cr, Rh, Pd and Au, halides such as PtCl2, SnF2 and PbF4, or oxides such as B2O3, OsO4, GeO2, SnO and Sb2O4 are reacted with ClF3 and additional O2, where necessary, under UV irradiation. Cr, Rh, Pd, PtCl2, GeO2, and SnO formed salts with the respective hexafluoridometallate(IV) anion with the composition [ClOF2]2[MF6]. They crystallize in two distinct structure types in either the monoclinic crystal system (M=Cr, Rh, Ge) or the orthorhombic one (M=Pd, Pt, Sn). The fluorides SnF2 and PbF4 were converted to the monoclinic salts [ClOF2]MF5, and B2O3 formed orthorhombic [ClOF2][BF4]. The triclinic compound ([ClOF2][OsO3F3])2⋅OsF6 was obtained from OsO4 and contains a neutral co‐crystallized OsF6 molecule. A monoclinic double salt with the composition [ClOF2]2[AuF4][SbF6] was obtained by reacting a mixture of Sb2O4 and Au. The compounds were investigated by single crystal X‐ray diffraction and IR and Raman spectroscopy. Quantum‐chemical calculations for the solid‐state allowed for the band assignments of the vibrational spectra.
- 13 January 2022
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 58 (13) , 2200-2203
Synthesis, characterization, and high-pressure studies of a 3D berkelium(iii) carboxylate framework material
A berkelium(III) mellitate, Bk2[C6(CO2)6](H2O)8·2H2O, was synthesized and rapidly crystallized by reacting mellitic acid, C6(CO2H)6, and BkBr3·nH2O in an aqueous medium. Single crystal X-ray diffraction shows that the compound crystallizes as a three-dimensional framework isostructural with Pu(III), Am(III), and Cm(III) mellitates. UV-vis-NIR spectroscopic studies as a function of pressure were performed using a diamond anvil cell and show that the 5f → 5f transitions of Bk3+ display enhanced hypsochromic shifting when compared to other An(III) mellitates.
- 13 January 2022
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 58 (13) , 2200-2203
Synthesis, characterization, and high-pressure studies of a 3D berkelium(iii) carboxylate framework material
A berkelium(III) mellitate, Bk2[C6(CO2)6](H2O)8·2H2O, was synthesized and rapidly crystallized by reacting mellitic acid, C6(CO2H)6, and BkBr3·nH2O in an aqueous medium. Single crystal X-ray diffraction shows that the compound crystallizes as a three-dimensional framework isostructural with Pu(III), Am(III), and Cm(III) mellitates. UV-vis-NIR spectroscopic studies as a function of pressure were performed using a diamond anvil cell and show that the 5f → 5f transitions of Bk3+ display enhanced hypsochromic shifting when compared to other An(III) mellitates.
- Open Access
- 7 November 2020
- Published by Wiley in European Journal of Inorganic Chemistry
- Vol. 2021 (4) , 405-421
Reactions of ClF3 with Main Group and Transition Metal Oxides: Access to Dioxychloronium(V) Fluoridometallates and Oxidofluoridometallates
Compounds containing the dioxychloronium cation, [ClO2]+, were obtained from reactions of ClF3 with various oxides such as TiO2, MoO3, Re2O7, SnO, P2O5, As2O5, and Nb metal, as the latter contained oxide as an impurity. Partial hydrolysis of [ClF2][IrF6] led to the formation of [ClO2][IrF6]. The crystal structures of the compounds were determined by single‐crystal X‐ray diffraction, which showed that depending on the starting material [ClO2]+ salts with the fluoridometallate anions [TiF3/2F3/1]2]−, [Nb3F16]−, [IrF6]−, [SnF2/2F4/1]− [PF6]−, and [AsF6]−, or with the oxidofluoridometallate anions [Mo3O3F13]− and [Re3O6F10]−, were obtained. Bent [ClO2]+ cations with short Cl ⋅ ⋅ ⋅ μ−F contacts of surrounding F atoms of the anions with the Cl atom are present in the crystal structures, leading to coordination numbers of 2+4 or 2+6 for the Cl atom. Various structural motifs are observed, which range from molecular, columnar, ladder‐like, to layer and framework structures. The salts were furthermore characterized by Raman spectroscopy and solid‐state quantum‐chemical calculations. Covalent Cl−O bonds and ionic Cl ⋅ ⋅ ⋅ μ−F interactions are indicated by the calculations.
- 7 November 2020
- Published by Wiley in European Journal of Inorganic Chemistry
- Vol. 2021 (4) , 405-421
Open AccessReactions of ClF3 with Main Group and Transition Metal Oxides: Access to Dioxychloronium(V) Fluoridometallates and Oxidofluoridometallates
Compounds containing the dioxychloronium cation, [ClO2]+, were obtained from reactions of ClF3 with various oxides such as TiO2, MoO3, Re2O7, SnO, P2O5, As2O5, and Nb metal, as the latter contained oxide as an impurity. Partial hydrolysis of [ClF2][IrF6] led to the formation of [ClO2][IrF6]. The crystal structures of the compounds were determined by single‐crystal X‐ray diffraction, which showed that depending on the starting material [ClO2]+ salts with the fluoridometallate anions [TiF3/2F3/1]2]−, [Nb3F16]−, [IrF6]−, [SnF2/2F4/1]− [PF6]−, and [AsF6]−, or with the oxidofluoridometallate anions [Mo3O3F13]− and [Re3O6F10]−, were obtained. Bent [ClO2]+ cations with short Cl ⋅ ⋅ ⋅ μ−F contacts of surrounding F atoms of the anions with the Cl atom are present in the crystal structures, leading to coordination numbers of 2+4 or 2+6 for the Cl atom. Various structural motifs are observed, which range from molecular, columnar, ladder‐like, to layer and framework structures. The salts were furthermore characterized by Raman spectroscopy and solid‐state quantum‐chemical calculations. Covalent Cl−O bonds and ionic Cl ⋅ ⋅ ⋅ μ−F interactions are indicated by the calculations.