Asad-Ur-Rehman Khan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Asad-Ur-Rehman Khan has a total of 53 co-authors. Here are the top co-authors by number of shared publications:
- Shamsoon Fareed
Department of Civil Engineering, NED University of Engineering & Technology, Karachi, Pakistan
13 shared publications Shamsoon Fareed
NED University of Engineering & Technology
8 shared publications- Tehmina Ayub
NED University of Engineering and Technology
7 shared publications A.H. Al-Gadhib
Department of Civil Engineering, King Fahd University of Petroleum & Minerals, KFUPM P.O. Box 5058, Dhahran 31261, Saudi Arabia
4 shared publicationsJianzhuang Xiao
Department of Structural Engineering, College of Civil Engineering, Tongji University, Shanghai, China
4 shared publicationsM.H. Baluch
Department of Civil Engineering, King Fahd University of Petroleum & Minerals, KFUPM P.O. Box 5058, Dhahran 31261, Saudi Arabia
4 shared publications
Latest Publications
- 25 August 2026
- Published by Emerald Publishing in Proceedings of the Institution of Civil Engineers - Engineering Sustainability
- p. 1-12
Life cycle assessment of RCC bridge for environmental impact evaluation: a case study
Bridge construction activities significantly impact the environment due to the extensive use of materials and fuel-powered equipment, both contributing heavily to carbon dioxide (CO2) emissions. Life cycle assessment (LCA) provides a robust methodology for evaluating these environmental impacts throughout a bridge’s life span. This case study examines the environmental footprint of a reinforced cement concrete (RCC) bridge using a comprehensive LCA framework aligned with ISO 14040 standards and implemented through the One Click LCA tool. The selected case is an existing RCC bridge located in a densely populated urban area of Karachi, covering cradle-to-gate, operations, and maintenance phases. Construction phase data was gathered retrospectively, while maintenance impacts were estimated using scenario-based assessments supported by actual data from the contractor, consultant, and bridge authority. Operational emissions, including traffic-related carbon dioxide, were measured using carbon dioxide sensors and traffic counts. The total life cycle carbon footprint was calculated as 11 678 862.2 kg carbon dioxide-eq, with construction and maintenance phases contributing 11 676 493 kg carbon dioxide-eq, and fossil-based emissions alone accounting for 5 924 910 kg carbon dioxide-eq. Ready-mix concrete (26.4%) and reinforcement steel (24%) were the highest emission sources. The global warming potential category showed the greatest impact. The study emphasises adopting low-carbon materials, efficient design, and emission-reduction strategies for sustainable infrastructure.
- 25 August 2026
- Published by Emerald Publishing in Proceedings of the Institution of Civil Engineers - Engineering Sustainability
- p. 1-12
Life cycle assessment of RCC bridge for environmental impact evaluation: a case study
Bridge construction activities significantly impact the environment due to the extensive use of materials and fuel-powered equipment, both contributing heavily to carbon dioxide (CO2) emissions. Life cycle assessment (LCA) provides a robust methodology for evaluating these environmental impacts throughout a bridge’s life span. This case study examines the environmental footprint of a reinforced cement concrete (RCC) bridge using a comprehensive LCA framework aligned with ISO 14040 standards and implemented through the One Click LCA tool. The selected case is an existing RCC bridge located in a densely populated urban area of Karachi, covering cradle-to-gate, operations, and maintenance phases. Construction phase data was gathered retrospectively, while maintenance impacts were estimated using scenario-based assessments supported by actual data from the contractor, consultant, and bridge authority. Operational emissions, including traffic-related carbon dioxide, were measured using carbon dioxide sensors and traffic counts. The total life cycle carbon footprint was calculated as 11 678 862.2 kg carbon dioxide-eq, with construction and maintenance phases contributing 11 676 493 kg carbon dioxide-eq, and fossil-based emissions alone accounting for 5 924 910 kg carbon dioxide-eq. Ready-mix concrete (26.4%) and reinforcement steel (24%) were the highest emission sources. The global warming potential category showed the greatest impact. The study emphasises adopting low-carbon materials, efficient design, and emission-reduction strategies for sustainable infrastructure.
- 7 March 2026
- Published by SAGE Publications in Advances in Structural Engineering
- Vol. 29 (15) , 3166-3188
CrackGAN: Generative adversarial networks based predictive visualization mechanism of crack propagation in RC bridge elements
Surface cracks in reinforced concrete (RC) bridge structural elements pose significant concerns regarding durability, strength, and serviceability. Micro-cracks, if left unchecked, can propagate into macro-cracks due to several factors leading to structural health deteriorations and increased maintenance costs. Generative Adversarial Networks (GANs), which leverage Convolutional Neural Networks (CNNs), provide a powerful alternative by learning from unstructured image datasets and generating realistic visual outputs. This study presents a novel GAN-based mechanism referred to as CrackGAN for predicting the propagation patterns of cracks in RC bridge elements. The model synthesizes realistic crack growth patterns and allows for predictive visualization of their evolution. Validation of predicted results were validated by comparing them with real time crack propagation recorded in laboratory tests on RC beams and slabs. The results were evaluated using Structural Similarity Index Measure (SSIM) and Learned Perceptual Image Patch Similarity (LPIPS), demonstrating strong agreement between predicted and experimentally observed crack propagation.
- 7 March 2026
- Published by SAGE Publications in Advances in Structural Engineering
- Vol. 29 (15) , 3166-3188
CrackGAN: Generative adversarial networks based predictive visualization mechanism of crack propagation in RC bridge elements
Surface cracks in reinforced concrete (RC) bridge structural elements pose significant concerns regarding durability, strength, and serviceability. Micro-cracks, if left unchecked, can propagate into macro-cracks due to several factors leading to structural health deteriorations and increased maintenance costs. Generative Adversarial Networks (GANs), which leverage Convolutional Neural Networks (CNNs), provide a powerful alternative by learning from unstructured image datasets and generating realistic visual outputs. This study presents a novel GAN-based mechanism referred to as CrackGAN for predicting the propagation patterns of cracks in RC bridge elements. The model synthesizes realistic crack growth patterns and allows for predictive visualization of their evolution. Validation of predicted results were validated by comparing them with real time crack propagation recorded in laboratory tests on RC beams and slabs. The results were evaluated using Structural Similarity Index Measure (SSIM) and Learned Perceptual Image Patch Similarity (LPIPS), demonstrating strong agreement between predicted and experimentally observed crack propagation.
- 16 September 2025
- Published by SAGE Publications in Advances in Structural Engineering
- Vol. 29 (8) , 1441-1463
Enhancing structural health monitoring: Conditional GAN-based crack detection in concrete and asphalt surfaces
Structural Health Monitoring (SHM) techniques are essential for identifying structural defects and damages to optimize maintenance and repair schedules. While automated vision-based damage detection systems have been explored in the past, their reliability and deployment challenges in real-world scenarios have limited widespread adoption in structural inspections. This research presents an innovative approach to SHM by leveraging advanced Deep Learning (DL) techniques to overcome persistent challenges in automated vision-based damage detection systems. This paper introduces a novel application of Pix2Pix, a Conditional Generative Adversarial Network (CGAN), designed for efficient and precise crack detection and localization in concrete bridges. The approach is centered on a robust DL model trained on an extensive and diverse dataset of cracked concrete and asphalt pavement surfaces. Streamlined workflow of the proposed system enables rapid processing and generates highly accurate representations of detected cracks in under 0.7 seconds, significantly enhancing real-time monitoring capabilities. To demonstrate practical applicability, a user-friendly prototype application was developed for detecting deterioration in concrete and asphalt pavement surfaces. This tool not only identifies existing damage but also supports longitudinal studies by enabling comparisons with previous assessments for crack propagation behavior analysis. The proposed system’s ease of use and automation capabilities make it a promising solution for large-scale structural inspections, offering a significant step forward in the field of SHM.
- 16 September 2025
- Published by SAGE Publications in Advances in Structural Engineering
- Vol. 29 (8) , 1441-1463
Enhancing structural health monitoring: Conditional GAN-based crack detection in concrete and asphalt surfaces
Structural Health Monitoring (SHM) techniques are essential for identifying structural defects and damages to optimize maintenance and repair schedules. While automated vision-based damage detection systems have been explored in the past, their reliability and deployment challenges in real-world scenarios have limited widespread adoption in structural inspections. This research presents an innovative approach to SHM by leveraging advanced Deep Learning (DL) techniques to overcome persistent challenges in automated vision-based damage detection systems. This paper introduces a novel application of Pix2Pix, a Conditional Generative Adversarial Network (CGAN), designed for efficient and precise crack detection and localization in concrete bridges. The approach is centered on a robust DL model trained on an extensive and diverse dataset of cracked concrete and asphalt pavement surfaces. Streamlined workflow of the proposed system enables rapid processing and generates highly accurate representations of detected cracks in under 0.7 seconds, significantly enhancing real-time monitoring capabilities. To demonstrate practical applicability, a user-friendly prototype application was developed for detecting deterioration in concrete and asphalt pavement surfaces. This tool not only identifies existing damage but also supports longitudinal studies by enabling comparisons with previous assessments for crack propagation behavior analysis. The proposed system’s ease of use and automation capabilities make it a promising solution for large-scale structural inspections, offering a significant step forward in the field of SHM.
- 21 April 2025
- Published by Emerald Publishing in Engineering Computations
- Vol. 42 (4) , 1471-1501
Estimation of parameters for constitutive modelling of recycled aggregate concrete using artificial neural networks
Purpose: This study aims to improve the performance of the existing constitutive model of recycled aggregate concrete (RAC) by estimating the parameters used in the model using artificial neural networks (ANN).Design/methodology/approach: The use of RAC as structural concrete is gaining importance as it contributes towards several sustainable development goals (SDGs) defined by the United Nations. Several parameters are required to model the complete behaviour of concrete under multiaxial loading. The existing RAC model proposed by the authors requires four parameters to define the complete stress–strain curve. Concrete compressive strength ( f c / ) and Modulus of elasticity are the most important properties of concrete used in the design of concrete structures, whereas α and β are the other two parameters to control the damage growth rate and to capture the behaviour of RAC at respective peak stress levels. ANNs were trained to estimate these parameters by using the data available in the literature. Proposed ANN models were first validated and then used in the constitutive model to estimate these four parameters.Findings: Proposed ANN models accurately estimated the parameters needed to improve the predicting capabilities of existing RAC constitutive models. The overall performance of the constitutive model in terms of peak stresses improved with the use of parameters predicted by ANN models.Originality/value: ANN has been used for the estimation of parameters that directly influence the behaviour of RAC under multiaxial states of stress instead of conventional regression techniques.
- 21 April 2025
- Published by Emerald Publishing in Engineering Computations
- Vol. 42 (4) , 1471-1501
Estimation of parameters for constitutive modelling of recycled aggregate concrete using artificial neural networks
Purpose: This study aims to improve the performance of the existing constitutive model of recycled aggregate concrete (RAC) by estimating the parameters used in the model using artificial neural networks (ANN).Design/methodology/approach: The use of RAC as structural concrete is gaining importance as it contributes towards several sustainable development goals (SDGs) defined by the United Nations. Several parameters are required to model the complete behaviour of concrete under multiaxial loading. The existing RAC model proposed by the authors requires four parameters to define the complete stress–strain curve. Concrete compressive strength ( f c / ) and Modulus of elasticity are the most important properties of concrete used in the design of concrete structures, whereas α and β are the other two parameters to control the damage growth rate and to capture the behaviour of RAC at respective peak stress levels. ANNs were trained to estimate these parameters by using the data available in the literature. Proposed ANN models were first validated and then used in the constitutive model to estimate these four parameters.Findings: Proposed ANN models accurately estimated the parameters needed to improve the predicting capabilities of existing RAC constitutive models. The overall performance of the constitutive model in terms of peak stresses improved with the use of parameters predicted by ANN models.Originality/value: ANN has been used for the estimation of parameters that directly influence the behaviour of RAC under multiaxial states of stress instead of conventional regression techniques.
- Open Access
- 24 June 2024
- Published by Yildiz Technical University - DIGITAL COMMONS JOURNALS in Journal of Sustainable Construction Materials and Technologies
- Vol. 9 (2) , 128-137
Mechanical properties of kevlar and jute fiber reinforced concrete
Concrete, due to its inherent brittleness, exhibits relatively low tensile strength. Fibers have been used extensively to improve their mechanical properties as they helped to reduce the crack width. Textile industries produce a lot of natural and synthetic fiber waste, which can be utilized to produce better-performing fiber-reinforced concrete. Therefore, in this study, a detailed experimental investigation has been carried out to study the compressive, tensile, and flexural properties of the Kevlar and jute fiber reinforced concrete. Concrete specimens with a mix design ratio of 1:1.43:1.89 and a water-cement ratio of 0.6 were cast. Jute fibers with lengths of 10 mm, 15 mm, and 25 mm and three different concentrations of 0.1%, 0.25%, and 0.5% by volume of concrete were used. In contrast, Kevlar fibers with lengths of 10 mm, 15 mm, and 20 mm and three different concentrations of 1%, 1.5%, and 2.5% by volume of concrete were used. It was found that both Kevlar and Jute fibers contributed positively to- wards controlling the crack initiation and propagation, suggesting using fibers in concrete for enhanced mechanical properties and performance.
- 24 June 2024
- Published by Yildiz Technical University - DIGITAL COMMONS JOURNALS in Journal of Sustainable Construction Materials and Technologies
- Vol. 9 (2) , 128-137
Open AccessMechanical properties of kevlar and jute fiber reinforced concrete
Concrete, due to its inherent brittleness, exhibits relatively low tensile strength. Fibers have been used extensively to improve their mechanical properties as they helped to reduce the crack width. Textile industries produce a lot of natural and synthetic fiber waste, which can be utilized to produce better-performing fiber-reinforced concrete. Therefore, in this study, a detailed experimental investigation has been carried out to study the compressive, tensile, and flexural properties of the Kevlar and jute fiber reinforced concrete. Concrete specimens with a mix design ratio of 1:1.43:1.89 and a water-cement ratio of 0.6 were cast. Jute fibers with lengths of 10 mm, 15 mm, and 25 mm and three different concentrations of 0.1%, 0.25%, and 0.5% by volume of concrete were used. In contrast, Kevlar fibers with lengths of 10 mm, 15 mm, and 20 mm and three different concentrations of 1%, 1.5%, and 2.5% by volume of concrete were used. It was found that both Kevlar and Jute fibers contributed positively to- wards controlling the crack initiation and propagation, suggesting using fibers in concrete for enhanced mechanical properties and performance.
- 7 June 2024
- Published by Springer Nature in Arabian Journal for Science and Engineering
- Vol. 50 (11) , 8127-8141
Simulation of Reinforced Recycled Aggregate Concrete Frames Subjected to Seismic Loading
- 7 June 2024
- Published by Springer Nature in Arabian Journal for Science and Engineering
- Vol. 50 (11) , 8127-8141
Simulation of Reinforced Recycled Aggregate Concrete Frames Subjected to Seismic Loading
- 13 May 2024
- Published by Springer Nature in Arabian Journal for Science and Engineering
- Vol. 50 (3) , 1833-1850
Simulation of Reinforced Concrete Slabs in Residential Buildings Under Internal Gas Blast
- 13 May 2024
- Published by Springer Nature in Arabian Journal for Science and Engineering
- Vol. 50 (3) , 1833-1850
Simulation of Reinforced Concrete Slabs in Residential Buildings Under Internal Gas Blast
- Open Access
- 1 January 2024
- Published by Wiley in Advances in Materials Science and Engineering
- Vol. 2024 (1)
Effect of Glass Powder on the Compressive Strength and Drying Shrinkage Behavior of OPC‐ and LC3‐50‐Based Cementitious Composites of Various Strengths
This study assesses the compressive strength and drying shrinkage behavior of cement and LC3‐50‐based cementitious composites containing glass powder. A total of four, i.e., 20, 35, 50, and 60 MPa, strengths of cementitious composites were targeted by varying the mix composition and water‐to‐cement ratios. In all four composite mix types, locally available glass powder was used as 0, 5, 10, and 15% added as a partial replacement of cement and LC3‐50. The novelty of this research is the addition of waste glass powder as an alternative to silica fume, especially in a high‐strength composite (including 50 and 60 MPa). The aim was to investigate the efficiency of waste glass powder in providing eco‐friendly composites. The compressive strength was determined following ASTM C 109 standard and the drying shrinkage test followed ASTM C 157 standard. The results of compressive strength in the enhancement using up to 10% waste glass powder are beneficial in enhancing strength and reducing drying shrinkage. Furthermore, the use of LC3‐50 initially reduced compressive strength up to 14 days while increased at 28 days compared to OPC. Contrariwise, the initial drying shrinkage was higher in LC3‐50 specimens and lower at later ages compared to OPC. A detailed investigation of existing shrinkage models for mortar/composite is assessed, and limitations are also discussed.
- 1 January 2024
- Published by Wiley in Advances in Materials Science and Engineering
- Vol. 2024 (1)
Open AccessEffect of Glass Powder on the Compressive Strength and Drying Shrinkage Behavior of OPC‐ and LC3‐50‐Based Cementitious Composites of Various Strengths
This study assesses the compressive strength and drying shrinkage behavior of cement and LC3‐50‐based cementitious composites containing glass powder. A total of four, i.e., 20, 35, 50, and 60 MPa, strengths of cementitious composites were targeted by varying the mix composition and water‐to‐cement ratios. In all four composite mix types, locally available glass powder was used as 0, 5, 10, and 15% added as a partial replacement of cement and LC3‐50. The novelty of this research is the addition of waste glass powder as an alternative to silica fume, especially in a high‐strength composite (including 50 and 60 MPa). The aim was to investigate the efficiency of waste glass powder in providing eco‐friendly composites. The compressive strength was determined following ASTM C 109 standard and the drying shrinkage test followed ASTM C 157 standard. The results of compressive strength in the enhancement using up to 10% waste glass powder are beneficial in enhancing strength and reducing drying shrinkage. Furthermore, the use of LC3‐50 initially reduced compressive strength up to 14 days while increased at 28 days compared to OPC. Contrariwise, the initial drying shrinkage was higher in LC3‐50 specimens and lower at later ages compared to OPC. A detailed investigation of existing shrinkage models for mortar/composite is assessed, and limitations are also discussed.
- 22 November 2023
- Published by Taylor & Francis in The Journal of the Textile Institute
- Vol. 115 (11) , 2116-2124
Behavior of reinforced recycled aggregate concrete beams and slabs strengthened in flexure and punching with CFRP composites
- 22 November 2023
- Published by Taylor & Francis in The Journal of the Textile Institute
- Vol. 115 (11) , 2116-2124
Behavior of reinforced recycled aggregate concrete beams and slabs strengthened in flexure and punching with CFRP composites