AKAnn Karakurkchi

Ann Karakurkchi

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Ann Karakurkchi has a total of 63 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Synthesis and properties of polyfunctional coatings on aluminum and titanium alloys

    by Gulmira Yar-Mukhamedova, Nikolai Sakhnenko, Alla Korogodskaya, Iryna Stepanova, Anna Karakurkchi, Daniel Zellele, Akmaral Imanbayeva

    This work presents the synthesis of highly active electrode materials for the electrolytic production of hydrogen from aqueous solutions, which can also serve as photocatalysts. Composite coatings produced by plasma–electrolytic oxidation on aluminum and titanium alloy substrates, doped with vanadium and tungsten compounds, were investigated. The electrolysis processes of aqueous solutions using these composites as electrode materials were analyzed. Linear voltammetry was applied to determine the Tafel equation constants for the systems WO3 – V2O5 – Al2O3 / Al and WO3 – V2O5 – TiO2 / Ti, which are proposed as electrode materials for hydrogen evolution reactions. The study found that the dopant content, the metallic substrate characteristics, and surface morphology strongly influence the coatings' functional properties. The Tafel coefficients a and b indicate a high level of electrocatalytic activity for the synthesized coatings, confirming their suitability as electrode materials for electrolytic hydrogen production. A comparison of photocatalytic activity in the methyl orange degradation reaction revealed higher activity of the aluminum-based coating than the titanium-based coating, highlighting the relevance of these materials for ecological technologies. The presence of nonstoichiometric oxides, compositional variability, morphological differences, and the developed surface area accounts for their exceptionally high electrocatalytic activity and, therefore, their strong potential for functional applications.

  • Electrochemical and Mechanical Properties of Iron-Based Nanocomposites

    by Gulmira Yar-Mukhamedova, Nikolay Sakhnenko, Ann Karakurkchi, Iryna Yermolenko, Aiman Kemelzhanova, Daniel Zellele

  • Open Access

    Patterns in the electrochemical synthesis of thin-film photocatalytic materials based on titanium heterooxide compounds

    by Mykola Sakhnenko, Iryna Stepanova, Alla Korogodskaya, Ann Karakurkchi, Olena Skrypnyk, Anatoly Dzheniuk, Oleksandr Halak

    This paper reports a study the into processes of plasma-electrolyte formation of heterooxidic coatings on titanium alloys for the photocatalytic destruction of natural and man-made toxicants. The synthesis of coatings was carried out from aqueous solutions of diphosphates under a galvanostatic mode. For a quantitative description of photocatalytic reactions, the constants of the reaction rate kf from the linearized dependences ln(Ct/C0), where Ct is the current, C0 is the initial concentration of the reagent, were calculated. The morphology of the coating surface was investigated by atomic force microscopy, and the results were visualized by reconstruction of the relief in the form of 2D and 3D topographic maps. Morphological features of coatings made of titanium oxide (IV) and heterooxidic composites containing oxides of transition metals were analyzed. It is shown that the specific surface area remains an effective factor in regulating the photocatalytic activity of coatings. The establishment of the morphology of heterooxidic composites, as well as methods for controlling this parameter of the target product, is a constant component of the systematic study of such materials in determining their functional properties. It has been established that compared to oxide-titanium coatings whose surface layers are characterized by a toroidal mesostructure, heterooxidic compositions have a more developed surface, which has a positive effect on their functional properties. Subsequent heat treatment similarly affects the properties of the coating. The speed constants of the photocatalytic decomposition of the methyl yellow-hot azo dye were used to rank coatings of different composition according to their functional properties. Coatings from TiO2·ZnO showed the highest catalytic activity among the materials studied – kf is 5.26 10-3 min-1, which is several times higher than the corresponding value for TiO2


  • Open Access

    Development of an approach to improvement the protection of the population in protective buildings of civil protection in the conditions of air pollution by toxic chemical agents

    by Ann Karakurkchi, Mykola Sakhnenko, Alla Korogodskaya, Svitlana Zyubanova

    The object of research is the process of air purification from toxic chemicals in the filter ventilation systems of civil protection facilities, the subject of the study is the use of catalytic materials based on titanium dioxide coatings in filter ventilation systems. One of the most problematic places is the expired expiration dates of absorber filters used in the filter ventilation systems of civil protection structures. This can lead to a decrease in their protective effect on the disinfection of outdoor air in the conditions of man-made accidents, military operations or terrorist acts. As a result, it poses a threat to the life and health of people. To solve this problem, it is proposed to use catalytic materials based on titanium dioxide, obtained by plasma-electrolyte oxidation, in the filter-ventilation systems of civil protection facilities. In the course of the study, TiO2·MO coatings were formed on model titanium samples, where M is W, Mo, Zr, Zn. Using the methods of energy dispersive X-ray spectrometry, scanning electron and atomic force microscopy, and photocolorimetric studies, the properties of the synthesized functional materials were studied and the possibilities of their application in the technology of photocatalytic oxidation of toxic substances were determined. An analysis was also made of possible designs of photocatalytic blocks for filter ventilation systems using catalytic materials based on TiO2. It has been determined that the optimal technological form of a catalyst in a photocatalytic block is the deposition of a layer of titanium dioxide doped with additional components on a structured base by plasma-electrolyte oxidation. The results obtained made it possible to create proposals for the use of synthesized catalytic materials to increase the degree of protection of the population at civil protection facilities. In particular, it is proposed to arrange the existing filter ventilation systems with a photocatalytic unit (module) to increase the efficiency of neutralizing chemically hazardous substances, and, consequently, the degree of protection of people. The direction of further research is related to the manufacture of a mock-up sample of the photocatalytic unit and bench tests to study the effectiveness of air disinfection.

  • Nanostructured PEO-coatings on silumin as environmental catalysts

    by A. Karakurkchi, M. Sakhnenko, M. Ved', A. Gorokhyvskiy


  • Open Access

    Corrosion and Mechanical Properties of the Fe‐W‐Wo2 and Fe‐Mo‐MoO2 Nanocomposites

    by Gulmira Yar-Mukhamedova, Maryna Ved’, Nikolay Sakhnenko, Ann Karakurkchi, Iryna Yermolenko

    Analyzing of composition electrolytic coatings’ application for the metal surface protection is considered. It is established that using different components for coatings’ modification gives possibility to obtain surfaces with expanding exploitation properties, in particular, with improved wearing and anticorrosion resistance. The new approach for protecting details which are made from cast irons by obtaining two kinds of composition coatings from binary alloys iron‐molybdenum and iron‐tungsten is proposed. It is found that the modification of iron by refractory metals up to 37 wt. % leads to a noticeable change in the microstructure of the coatings’ surface. It is established that the incorporation of refractory metals into the iron matrix is a good way to increase the microhardness of the surface by 2.5–3.5 times and rising of the wear resistance by 40%, as well as decreasing the friction coefficient by 3‐4 times in comparison with the cast iron substrate. The research results can be used for surfaces hardening and protection in different industries.


  • PECULIARITIES OF COBALT CONTAINING OXIDE COATINGS FORMATION ON SILUMIN

    by Nikolay Sakhnenko, Maryna Ved’, Ann Karakurkchi

    The process of mixed oxide coatings formation on a high-silicon aluminum alloy in a cobalt-containing pyrophosphate electrolyte by the plasma-electrolytic oxidation (PEO) method is studied. It was shown that AL25 chemical composition heterogeneity causes the consumption of a part of the anode current to homogenize the treated surface, which is reflected in minimizing the content of doping components at the initial processing stage. It was established that the growth of mixed oxides Al2O3·CoxOy relative mass is a function of time with a maximum at 55 minutes. The chemical, phase composition and surface morphology of the formed oxide layer depend on the oxidation time. The catalytic component content in the surface oxides varies from 0.2 to 23.3 at.% with an increase in processing time of 10 to 60 minutes. Maximum cobalt incorporation into the oxide layer occurs at PEO of 35–50 minutes, while the silicon content in the surface layers does not exceed 2 at.%, which is favorable for the catalytic properties. The cobalt oxide, preferably Co3O4, incorporation in the alumina α-Al2O3 matrix is visualized by the blue-violet color steroidal surface structures in the sites of micro-arc discharges. The alumina cobalt oxide mixture layers are characterized by a developed micro-globular surface which consists of spheroid conglomerate with an average size of 1–2 microns. There are some amorphous phases in the structure of mixed oxides due to non-equilibrium PEO conditions. The set of detected factors is a prerequisite for the high catalytic properties of oxide coatings. A promising field of Al2O3·CoxOy systems application is intra-cylinder catalysis in internal combustion engines.

  • Open Access

    Features of Plasma Electrolytic Formation of Manganese- and Cobalt-Containing Composites on Aluminum Alloys

    by Ann V. Karakurkchi, Nykolay D. Sakhnenko, Maryna V. Ved’, Ihor S. Luhovskyi, Hryhoriy A. Drobakha, Maryna V. Mayba

    This paper presents the results of studies on the electrochemical treatment characteristics of aluminum and alloys in alkaline electrolytes. It is shown that the heterogeneity of the alloys composition complicates the formation of the surface oxide layer. To homogenize the treated surface and obtain oxide coatings doped with manganese and cobalt, electrolytes based on KOH and K4P2O7 with the addition of KMnO4 and CoSO4 were used. Plasma electrolytic oxidizing (PEO) in these electrolytes in the range of current densities 5–20 A/dm2 allows to obtain mixed oxide coatings which contained both aluminum oxide matrix and doping metal oxides Al2O3·MnOx and Al2O3·CoOy. It is shown that an increase in the PEO current density and the concentration of manganate- and cobalt(II) ions in the solution leads to an increase the content of dopant metals in the coatings outer layer. The incorporation of manganese and cobalt oxides in the composition of the surface layers was confirmed by the results of X-ray structural analysis. The rational modes of aluminum alloys PEO treatment were substantiated to obtain coatings with manganese and cobalt contents up to 25–40 аt.%. Formed oxide systems have a developed surface and high adhesion to the base metal and show an increased corrosion resistance and catalytic activity. This allows us to view them as promising materials for air- and water-cleaning technologies and internal combustion engine waste gas purification systems.


  • Nanostructured Mixed Oxide Coatings on Silumin Incorporated by Cobalt

    by Ann. V. Karakurkchi, Nikolay D. Sakhnenko, Maryna V. Ved’, Maryna V. Mayba

  • Open Access

    Determining features of application of functional electrochemical coatings in technologies of surface treatment

    by Ann Karakurkchi, Mykola Sakhnenko, Maryna Ved’, Iryna Yermolenko, Sergey Pavlenko, Vadym Yevsieiev, Yaroslav Pavlov, Vladislav Yemanov

    Determining features of application of functional electrochemical coatings in technologies of surface treatment