Manas Chandra Ray
Research Subjects
Manas Chandra Ray has a total of 20 co-authors. Here are the top co-authors by number of shared publications:
- Sai Sidhardh
Department of Mechanical and Aerospace Engineering, Indian Institute of Technology Hyderabad, Sangāreddi, India
7 shared publications - Shailesh Ishwarlal Kundalwal
Indian Institute of Technology Indore
7 shared publications R. Suresh Kumar
Indian Institute of Technology
4 shared publications- Priyankar Datta
Mechanical Engineering Department, Indian Institute of Technology Kharagpur, Kharagpur, India
3 shared publications Nilanjan Mallik
Indian Institute of Technology
2 shared publicationsR. M. Kanasogi
Indian Institute of Technology
2 shared publications
Latest Publications
- 4 June 2022
- Published by SAGE Publications in Journal of Intelligent Material Systems and Structures
- Vol. 34 (2) , 194-216
Effect of orientation of CNTs and piezoelectric fibers on the damping performance of multiscale composite plate
The present work deals with the study of active constrained layer damping treatment of multiscale carbon nanotube-based hybrid carbon fiber-reinforced composite plates. The distinctive feature of novel multiscale hybrid carbon fiber-reinforced composites is that the wavy/straight carbon nanotubes are distributed uniformly in the matrix phase of hybrid carbon fiber-reinforced composites, and the waviness of carbon nanotubes is considered to be coplanar with two mutually orthogonal planes. Firstly, the effective elastic properties of hybrid carbon fiber-reinforced composites are estimated using the Mori-Tanaka method. The outcomes of the Mori-Tanaka method suggest that the transverse effective elastic properties of hybrid carbon fiber-reinforced composites containing wavy carbon nanotubes are better than those of hybrid carbon fiber-reinforced composites with straight carbon nanotubes. Secondly, a finite element model using the layer-wise first-order shear deformation theory is developed to study the damping performance of hybrid carbon fiber-reinforced composite plates integrated with the active constrained layer damping treatment. The constraining layer of active constrained layer damping treatment is a 1–3 piezoelectric composite layer with vertically/obliquely-oriented piezo-fibers. The piezo-fibers make an angle [ ] with the vertical plane of a layer coplanar with the xz- or yz-plane. The effect of the orientation of piezo-fibers angle on the control authority of active constrained layer damping treatment patches is investigated. Our results reveal that the performance of multiscale hybrid carbon fiber-reinforced composite plates has improved due to the incorporation of wavy carbon nanotubes, and the orientation angle of piezo-fibers has a major impact on the control authority of active constrained layer damping patches. The proposed multiscale composite with the combination of wavy carbon nanotubes and active constrained layer damping patches can be actively used in the aerospace and transport industries to control the mechanical vibrations of structures.
- 4 June 2022
- Published by SAGE Publications in Journal of Intelligent Material Systems and Structures
- Vol. 34 (2) , 194-216
Effect of orientation of CNTs and piezoelectric fibers on the damping performance of multiscale composite plate
The present work deals with the study of active constrained layer damping treatment of multiscale carbon nanotube-based hybrid carbon fiber-reinforced composite plates. The distinctive feature of novel multiscale hybrid carbon fiber-reinforced composites is that the wavy/straight carbon nanotubes are distributed uniformly in the matrix phase of hybrid carbon fiber-reinforced composites, and the waviness of carbon nanotubes is considered to be coplanar with two mutually orthogonal planes. Firstly, the effective elastic properties of hybrid carbon fiber-reinforced composites are estimated using the Mori-Tanaka method. The outcomes of the Mori-Tanaka method suggest that the transverse effective elastic properties of hybrid carbon fiber-reinforced composites containing wavy carbon nanotubes are better than those of hybrid carbon fiber-reinforced composites with straight carbon nanotubes. Secondly, a finite element model using the layer-wise first-order shear deformation theory is developed to study the damping performance of hybrid carbon fiber-reinforced composite plates integrated with the active constrained layer damping treatment. The constraining layer of active constrained layer damping treatment is a 1–3 piezoelectric composite layer with vertically/obliquely-oriented piezo-fibers. The piezo-fibers make an angle [ ] with the vertical plane of a layer coplanar with the xz- or yz-plane. The effect of the orientation of piezo-fibers angle on the control authority of active constrained layer damping treatment patches is investigated. Our results reveal that the performance of multiscale hybrid carbon fiber-reinforced composite plates has improved due to the incorporation of wavy carbon nanotubes, and the orientation angle of piezo-fibers has a major impact on the control authority of active constrained layer damping patches. The proposed multiscale composite with the combination of wavy carbon nanotubes and active constrained layer damping patches can be actively used in the aerospace and transport industries to control the mechanical vibrations of structures.
- 1 September 2019
- Published by Springer Nature in International Journal of Mechanics and Materials in Design
- Vol. 15 (3) , 629-646
A novel hybrid-Trefftz finite element for symmetric laminated composite plates
- 1 September 2019
- Published by Springer Nature in International Journal of Mechanics and Materials in Design
- Vol. 15 (3) , 629-646
A novel hybrid-Trefftz finite element for symmetric laminated composite plates
- 23 June 2019
- Published by Wiley in International Journal for Numerical Methods in Engineering
- Vol. 120 (6) , 707-726
A novel smart hybrid‐Trefftz finite element for smart laminated composite plates
Summary: A novel smart hybrid‐Trefftz finite element (HTFE) has been developed for the analysis of smart laminated composite plates. The substrates of the smart plates are symmetric and antisymmetric cross‐ply plates. The derivation of this HTFE is devoid of the complicated task of finding the particular solutions of simultaneous governing partial differential equations. The Trefftz functions are constructed from the finite number of free‐field exact solutions of the homogeneous simultaneous governing partial differential equations of the element domain in a straightforward manner without transforming them into a single governing equation. The HTFE is validated with the exact solutions of the smart composite plates. It is observed that this HTFE is an efficient finite element and can be utilized for the analysis of active control of smart composite structures.
- 23 June 2019
- Published by Wiley in International Journal for Numerical Methods in Engineering
- Vol. 120 (6) , 707-726
A novel smart hybrid‐Trefftz finite element for smart laminated composite plates
Summary: A novel smart hybrid‐Trefftz finite element (HTFE) has been developed for the analysis of smart laminated composite plates. The substrates of the smart plates are symmetric and antisymmetric cross‐ply plates. The derivation of this HTFE is devoid of the complicated task of finding the particular solutions of simultaneous governing partial differential equations. The Trefftz functions are constructed from the finite number of free‐field exact solutions of the homogeneous simultaneous governing partial differential equations of the element domain in a straightforward manner without transforming them into a single governing equation. The HTFE is validated with the exact solutions of the smart composite plates. It is observed that this HTFE is an efficient finite element and can be utilized for the analysis of active control of smart composite structures.
- 15 April 2019
- Published by Oxford University Press (OUP) in Quarterly Journal of Mechanics and Applied Mathematics
- Vol. 72 (3) , 273-304
Size-Dependent elastic response in functionally graded microbeams considering generalized first strain gradient elasticity
Summary: In this article, the size-dependent mechanical response of an isotropic functionally graded (FG) microbeam has been investigated. The size-effects over the elastic response have been modeled by the Mindlin–Toupin strain gradient theory, with the coefficients evaluated from the generalized first strain gradient theory of elasticity. In order to facilitate the derivation of the exact solutions to the governing differential equations of equilibrium, an exponentially graded FG beam is chosen. These exact solutions are derived for a simply supported beam subjected to a sinusoidally distributed mechanical load. Following this, an element-free Galerkin (EFG) model involving moving least squares interpolations across the domain is also developed here. The EFG model is validated with the exact solutions for the exponentially graded beam. Finally, the EFG model is extended to the more general case of a power law-graded beam. The mechanical responses for the power law-graded beams under various loading and boundary conditions are presented here. These results may serve as benchmark for further studies over size-effects in FG beams.
- 15 April 2019
- Published by Oxford University Press (OUP) in Quarterly Journal of Mechanics and Applied Mathematics
- Vol. 72 (3) , 273-304
Size-Dependent elastic response in functionally graded microbeams considering generalized first strain gradient elasticity
Summary: In this article, the size-dependent mechanical response of an isotropic functionally graded (FG) microbeam has been investigated. The size-effects over the elastic response have been modeled by the Mindlin–Toupin strain gradient theory, with the coefficients evaluated from the generalized first strain gradient theory of elasticity. In order to facilitate the derivation of the exact solutions to the governing differential equations of equilibrium, an exponentially graded FG beam is chosen. These exact solutions are derived for a simply supported beam subjected to a sinusoidally distributed mechanical load. Following this, an element-free Galerkin (EFG) model involving moving least squares interpolations across the domain is also developed here. The EFG model is validated with the exact solutions for the exponentially graded beam. Finally, the EFG model is extended to the more general case of a power law-graded beam. The mechanical responses for the power law-graded beams under various loading and boundary conditions are presented here. These results may serve as benchmark for further studies over size-effects in FG beams.
- 19 February 2019
- Published by SAGE Publications in Journal of Intelligent Material Systems and Structures
- Vol. 30 (7) , 977-997
Effect of carbon nanotube waviness on smart damping of geometrically nonlinear vibrations of fuzzy-fiber reinforced composite plates
In this article, we present a finite element model for the three-dimensional analysis of smart constrained layer damping of geometrically nonlinear vibrations of laminated fuzzy-fiber reinforced composite plates. The three-dimensional fractional derivative constitutive relation is implemented for the viscoelastic layer. The constraining layer of the smart constrained layer damping treatment is composed of the vertically/obliquely reinforced 1–3 piezoelectric composites. The von Kármán–type nonlinear strain–displacement relations are used to incorporate the geometric nonlinearity in the model. The main aim of this article is to numerically investigate the effect of carbon nanotube waviness on the nonlinear smart damping. Several thin laminated substrate fuzzy-fiber reinforced composite plates with straight carbon nanotubes and wavy carbon nanotubes with different waviness in different planes are considered with various boundary conditions and stacking sequences to numerically compute their effect on smart damping. The performance of the obliquely reinforced 1–3 piezoelectric composites is discussed and the efficacy of the present smart finite element model in terms of active control authority is also presented.
- 19 February 2019
- Published by SAGE Publications in Journal of Intelligent Material Systems and Structures
- Vol. 30 (7) , 977-997
Effect of carbon nanotube waviness on smart damping of geometrically nonlinear vibrations of fuzzy-fiber reinforced composite plates
In this article, we present a finite element model for the three-dimensional analysis of smart constrained layer damping of geometrically nonlinear vibrations of laminated fuzzy-fiber reinforced composite plates. The three-dimensional fractional derivative constitutive relation is implemented for the viscoelastic layer. The constraining layer of the smart constrained layer damping treatment is composed of the vertically/obliquely reinforced 1–3 piezoelectric composites. The von Kármán–type nonlinear strain–displacement relations are used to incorporate the geometric nonlinearity in the model. The main aim of this article is to numerically investigate the effect of carbon nanotube waviness on the nonlinear smart damping. Several thin laminated substrate fuzzy-fiber reinforced composite plates with straight carbon nanotubes and wavy carbon nanotubes with different waviness in different planes are considered with various boundary conditions and stacking sequences to numerically compute their effect on smart damping. The performance of the obliquely reinforced 1–3 piezoelectric composites is discussed and the efficacy of the present smart finite element model in terms of active control authority is also presented.
- 29 January 2019
- Published by SAGE Publications in Mathematics and Mechanics of Solids
- Vol. 24 (7) , 2251-2273
Size-dependent Eshelby’s ellipsoidal inclusion problem based on generalized first strain gradient elasticity theory
An analytical solution of Eshelby’s ellipsoidal inclusion problem is derived in this paper using the generalized first strain gradient theory (GFSGT) of elasticity. The GFSGT employed here is a reformulation of Mindlin’s first-order strain gradient theory, retaining only three independent material length scales. The Eshelby’s tensor for an ellipsoidal inclusion embedded in a strain gradient elastic continuum is obtained from the result for an arbitrary inclusion, which is available in the literature. The fourth-order Eshelby’s tensor depicts size-dependent behaviour, and a position-dependence is noted even within the domain of the inclusion. The volume average of this position-dependent tensor is determined inside and outside the inclusion, for the evaluation of size-dependent homogenized properties of composites. As expected, the results of this study asymptotically approach those of classical elasticity when the geometric dimensions of the inclusion are increased. For inclusions having sizes on the order of the material length scale parameters, these volume averages are strongly influenced by gradient effects. A comparison of the current model based on the GFSGT with that built on the simplified theories of strain gradient elasticity is made to illustrate the complete strain gradient effects. This comparison, along with the suitability of a generalized model involving different length scales for crystals and polymers, illustrates the importance of using GFSGT for determining the effective properties of micro- and nanocomposites.
- 29 January 2019
- Published by SAGE Publications in Mathematics and Mechanics of Solids
- Vol. 24 (7) , 2251-2273
Size-dependent Eshelby’s ellipsoidal inclusion problem based on generalized first strain gradient elasticity theory
An analytical solution of Eshelby’s ellipsoidal inclusion problem is derived in this paper using the generalized first strain gradient theory (GFSGT) of elasticity. The GFSGT employed here is a reformulation of Mindlin’s first-order strain gradient theory, retaining only three independent material length scales. The Eshelby’s tensor for an ellipsoidal inclusion embedded in a strain gradient elastic continuum is obtained from the result for an arbitrary inclusion, which is available in the literature. The fourth-order Eshelby’s tensor depicts size-dependent behaviour, and a position-dependence is noted even within the domain of the inclusion. The volume average of this position-dependent tensor is determined inside and outside the inclusion, for the evaluation of size-dependent homogenized properties of composites. As expected, the results of this study asymptotically approach those of classical elasticity when the geometric dimensions of the inclusion are increased. For inclusions having sizes on the order of the material length scale parameters, these volume averages are strongly influenced by gradient effects. A comparison of the current model based on the GFSGT with that built on the simplified theories of strain gradient elasticity is made to illustrate the complete strain gradient effects. This comparison, along with the suitability of a generalized model involving different length scales for crystals and polymers, illustrates the importance of using GFSGT for determining the effective properties of micro- and nanocomposites.
- 26 December 2018
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 124 (24) , 244101
Flexomagnetic response of nanostructures
This paper presents the constitutive modeling of the flexomagnetic (FM) effect in structures involving a non-zero magnetic field generated in the presence of inhomogeneous strain across the domain. In order to evaluate the magneto-elastic (ME) structural response, the tensorial governing equations and associated boundary conditions for the mechanical and magnetic variables are derived here using the variational principle. Following this, these differential equations are solved to determine the effect of FM over the bending response of a cantilever piezomagnetic nanobeam. Different magnetic boundary conditions are analyzed to study the effect of direct and converse FM couplings over the ME response. The significant influence of FM coupling over the ME response has been noted for thin beams with low-dimensions, which wanes as the geometric dimensions are increased. Given the significance of this size-dependent FM response in nano-structures, the theory for flexomagnetism proposed here may be utilized in the development of smart ME nano-structures with the potential for wide applications.
- 26 December 2018
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 124 (24) , 244101
Flexomagnetic response of nanostructures
This paper presents the constitutive modeling of the flexomagnetic (FM) effect in structures involving a non-zero magnetic field generated in the presence of inhomogeneous strain across the domain. In order to evaluate the magneto-elastic (ME) structural response, the tensorial governing equations and associated boundary conditions for the mechanical and magnetic variables are derived here using the variational principle. Following this, these differential equations are solved to determine the effect of FM over the bending response of a cantilever piezomagnetic nanobeam. Different magnetic boundary conditions are analyzed to study the effect of direct and converse FM couplings over the ME response. The significant influence of FM coupling over the ME response has been noted for thin beams with low-dimensions, which wanes as the geometric dimensions are increased. Given the significance of this size-dependent FM response in nano-structures, the theory for flexomagnetism proposed here may be utilized in the development of smart ME nano-structures with the potential for wide applications.
- 26 November 2018
- Published by Springer Nature in International Journal of Mechanics and Materials in Design
- Vol. 15 (4) , 739-755
Benchmark analysis of piezoelectric bimorph energy harvesters composed of laminated composite beam substrates
- 26 November 2018
- Published by Springer Nature in International Journal of Mechanics and Materials in Design
- Vol. 15 (4) , 739-755
Benchmark analysis of piezoelectric bimorph energy harvesters composed of laminated composite beam substrates
- 16 August 2018
- Published by Springer Nature in International Journal of Mechanics and Materials in Design
- Vol. 15 (3) , 427-446
Exact solutions for flexoelectric response in elastic dielectric nanobeams considering generalized constitutive gradient theories
- 16 August 2018
- Published by Springer Nature in International Journal of Mechanics and Materials in Design
- Vol. 15 (3) , 427-446
Exact solutions for flexoelectric response in elastic dielectric nanobeams considering generalized constitutive gradient theories
- 16 June 2018
- Published by Springer Nature in Acta Mechanica
- Vol. 229 (9) , 3813-3831
Inclusion problem for a generalized strain gradient elastic continuum
- 16 June 2018
- Published by Springer Nature in Acta Mechanica
- Vol. 229 (9) , 3813-3831
Inclusion problem for a generalized strain gradient elastic continuum