Marcelo Antunes
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Marcelo Antunes has a total of 59 co-authors. Here are the top co-authors by number of shared publications:
- José Ignacio Velasco
Poly2 Group, Department of Materials Science and Engineering, Universitat Politècnica de Catalunya (UPC Barcelona Tech), 08222 Terrassa, Spain
17 shared publications - Hooman Abbasi
Department of Materials Science and Engineering, Poly2 Group, Technical University of Catalonia (UPC BarcelonaTech), ESEIAAT, C/Colom 11, 08222 Terrassa, Spain
7 shared publications - Vera Realinho
Poly2 Group, Department of Materials Science and Engineering, School of Industrial, Aerospace and Audiovisual Engineering of Terrassa, Universitat Politècnica de Catalunya (UPC BarcelonaTech), C/de Colom, 11, 08222 Terrassa, Spain
6 shared publications - David Arencón
Universitat Politecnica de Catalunya
4 shared publications - Eusebio Solorzano
University of Valladolid
2 shared publications - Miguel Angel Rodriguez Perez
Cellular Materials Laboratory (CellMat), Condensed Matter Physics Department, University of Valladolid, 47011 Valladolid, Spain
2 shared publications
Latest Publications
- Top Cited PapersOpen Access
Recent Developments in the Mechanical Behavior of Polymer-Based Composites
Polymer-based systems have been shown to have a particular combination of characteristics that make them desirable in technological sectors, such as lightness, insulating properties, and easy molding during processing, as well as mechanical versatility, which is greatly due to their molecular microstructure. Nevertheless, they still present limitations in mechanical performance and use at moderate/high temperatures, considerably restricting their range of applications. Thus, great efforts have been directed towards developing strategies intended to enhance said characteristics and predict their complex mechanical behavior, with the main goal of adapting their properties to the end-use application. The present review considers the most recent developments, focusing on the research published in 2025 and early 2026, and future challenges in the mechanical behavior of polymer-based materials, being structured according to material considerations, more specifically the development of advanced (nano)composites based on high-performance matrices and functional nanoparticles, as well as bio-based polymer (nano)composites obtained from renewable sources and multifunctional smart and meta-materials for monitoring and long-term use; the development of new processing methods, focusing on advanced additive manufacturing; and the use of artificial intelligence and machine learning. All in all, the final objective is generating knowledge that will enable the preparation of components with tailor-made mechanical characteristics and functional properties, covering material design and processing.
Top Cited PapersOpen AccessRecent Developments in the Mechanical Behavior of Polymer-Based Composites
Polymer-based systems have been shown to have a particular combination of characteristics that make them desirable in technological sectors, such as lightness, insulating properties, and easy molding during processing, as well as mechanical versatility, which is greatly due to their molecular microstructure. Nevertheless, they still present limitations in mechanical performance and use at moderate/high temperatures, considerably restricting their range of applications. Thus, great efforts have been directed towards developing strategies intended to enhance said characteristics and predict their complex mechanical behavior, with the main goal of adapting their properties to the end-use application. The present review considers the most recent developments, focusing on the research published in 2025 and early 2026, and future challenges in the mechanical behavior of polymer-based materials, being structured according to material considerations, more specifically the development of advanced (nano)composites based on high-performance matrices and functional nanoparticles, as well as bio-based polymer (nano)composites obtained from renewable sources and multifunctional smart and meta-materials for monitoring and long-term use; the development of new processing methods, focusing on advanced additive manufacturing; and the use of artificial intelligence and machine learning. All in all, the final objective is generating knowledge that will enable the preparation of components with tailor-made mechanical characteristics and functional properties, covering material design and processing.
- Open Access
Effects of Layered Nanoclays on the Cellular Structure, Dynamic–Mechanical–Thermal Properties and Fire Behavior of Flame-Retardant ABS Foams
The present work deals with the preparation and characterization of fire-retardant acrylonitrile–butadiene–styrene (ABS) foams incorporating 25 wt% of a phosphorus flame-retardant (PFR) system formed by 50% of ammonium polyphosphate (APP) and 50% of aluminum diethylphosphinate (AlPi). To further enhance performance, 5 wt% of the PFR was replaced by either montmorillonite (MMT) or layered double hydroxide (LDH) nanoparticles, maintaining the overall FR content constant. The formulations were prepared by melt blending, and foams were produced using a one-step supercritical carbon dioxide (sCO2) dissolution foaming process. The incorporation of the PFR, alone or partially replaced by nanoclays, resulted in foams with smaller cell sizes and higher cell nucleation densities compared to pure ABS, with cell sizes reducing from 60 μm to as low as 40 μm and cell densities reaching values > 107 cells/cm3. The presence of LDH notably modified the thermal decomposition of ABS–PFR, increasing the temperature at 5% mass loss (T5%) by more than 10 °C and the amount of formed residue by more than 15%. The ABS–PFR/LDH foam also showed a higher glass transition temperature (3 °C increase) and a higher specific storage modulus (920 MPa·cm3/g, a more than 40% increase). Cone calorimetry revealed a very significant reduction in the peak of the heat release rate (PHRR) and increased residue formation for ABS–PFR compared to ABS (from 1672 kW·m−2 to as low as 483 kW·m−2). LDH nanoparticles further decreased HRR during the early quasi-static combustion stage of foams, indicating a more effective condensed-phase flame-retardant action than MMT.
Open AccessEffects of Layered Nanoclays on the Cellular Structure, Dynamic–Mechanical–Thermal Properties and Fire Behavior of Flame-Retardant ABS Foams
The present work deals with the preparation and characterization of fire-retardant acrylonitrile–butadiene–styrene (ABS) foams incorporating 25 wt% of a phosphorus flame-retardant (PFR) system formed by 50% of ammonium polyphosphate (APP) and 50% of aluminum diethylphosphinate (AlPi). To further enhance performance, 5 wt% of the PFR was replaced by either montmorillonite (MMT) or layered double hydroxide (LDH) nanoparticles, maintaining the overall FR content constant. The formulations were prepared by melt blending, and foams were produced using a one-step supercritical carbon dioxide (sCO2) dissolution foaming process. The incorporation of the PFR, alone or partially replaced by nanoclays, resulted in foams with smaller cell sizes and higher cell nucleation densities compared to pure ABS, with cell sizes reducing from 60 μm to as low as 40 μm and cell densities reaching values > 107 cells/cm3. The presence of LDH notably modified the thermal decomposition of ABS–PFR, increasing the temperature at 5% mass loss (T5%) by more than 10 °C and the amount of formed residue by more than 15%. The ABS–PFR/LDH foam also showed a higher glass transition temperature (3 °C increase) and a higher specific storage modulus (920 MPa·cm3/g, a more than 40% increase). Cone calorimetry revealed a very significant reduction in the peak of the heat release rate (PHRR) and increased residue formation for ABS–PFR compared to ABS (from 1672 kW·m−2 to as low as 483 kW·m−2). LDH nanoparticles further decreased HRR during the early quasi-static combustion stage of foams, indicating a more effective condensed-phase flame-retardant action than MMT.
- Open Access
Recent Trends in Polymeric Foams and Porous Structures for Electromagnetic Interference Shielding Applications
Polymer-based (nano)composite foams containing conductive (nano)fillers limit electromagnetic interference (EMI) pollution, and have been shown to act as good shielding materials in electronic devices. However, due to their high (micro)structural complexity, there is still a great deal to learn about the shielding mechanisms in these materials; understanding this is necessary to study the relationship between the properties of the microstructure and the porous structure, especially their EMI shielding efficiency (EMI SE). Targeting and controlling the electrical conductivity through a controlled distribution of conductive nanofillers are two of the main objectives when combining foaming with the addition of nanofillers; to achieve this, both single or combined nanofillers (nanohybrids) are used (as there is a direct relationship between electrical conductivity and EMI SE), as are the main shielding mechanisms working on the foams (which are expected to be absorption-dominated). The present review considers the most significant developments over the last three years concerning polymer-based foams containing conductive nanofillers, especially carbon-based nanofillers, as well as other porous structures created using new technologies such as 3D printing for EMI shielding applications. It starts by detailing the microcellular foaming strategy, which develops polymer foams with enhanced EMI shielding, and it particularly focuses on technologies using supercritical CO2 (sCO2). It also notes the use of polymer foams as templates to prepare carbon foams with high EMI shielding performances for high temperature applications, as well as a recent strategy which combines different functional (nano)fillers to create nanohybrids. This review also explains the control and selective distribution of the nanofillers, which favor an effective conductive network formation, which thus promotes the enhancement of the EMI SE. The recent use of computational approaches to tailor the EMI shielding properties are given, as are new possibilities for creating components with varied porous structures using the abovementioned materials and 3D printing. Finally, future perspectives are discussed.
Open AccessRecent Trends in Polymeric Foams and Porous Structures for Electromagnetic Interference Shielding Applications
Polymer-based (nano)composite foams containing conductive (nano)fillers limit electromagnetic interference (EMI) pollution, and have been shown to act as good shielding materials in electronic devices. However, due to their high (micro)structural complexity, there is still a great deal to learn about the shielding mechanisms in these materials; understanding this is necessary to study the relationship between the properties of the microstructure and the porous structure, especially their EMI shielding efficiency (EMI SE). Targeting and controlling the electrical conductivity through a controlled distribution of conductive nanofillers are two of the main objectives when combining foaming with the addition of nanofillers; to achieve this, both single or combined nanofillers (nanohybrids) are used (as there is a direct relationship between electrical conductivity and EMI SE), as are the main shielding mechanisms working on the foams (which are expected to be absorption-dominated). The present review considers the most significant developments over the last three years concerning polymer-based foams containing conductive nanofillers, especially carbon-based nanofillers, as well as other porous structures created using new technologies such as 3D printing for EMI shielding applications. It starts by detailing the microcellular foaming strategy, which develops polymer foams with enhanced EMI shielding, and it particularly focuses on technologies using supercritical CO2 (sCO2). It also notes the use of polymer foams as templates to prepare carbon foams with high EMI shielding performances for high temperature applications, as well as a recent strategy which combines different functional (nano)fillers to create nanohybrids. This review also explains the control and selective distribution of the nanofillers, which favor an effective conductive network formation, which thus promotes the enhancement of the EMI SE. The recent use of computational approaches to tailor the EMI shielding properties are given, as are new possibilities for creating components with varied porous structures using the abovementioned materials and 3D printing. Finally, future perspectives are discussed.
- Open Access
- 6 December 2023
- Published by MDPI AG in Preprints.org
Recent Trends on Polymeric Foams and Porous Structures for Emi Shielding Applications
Polymer-based (nano)composite foams, especially those having a microcellular structure, containing suitable conductive (nano)fillers, have been shown to act as good shielding materials, hence coming as promising to act as shields in electronic devices, limiting/avoiding electromagnetic interference (EMI) pollution. Nevertheless, due to their high (micro)structural complexity, related to their multiphase nature, there is still a lot of unawareness behind the shielding mechanisms acting in these materials, coming as a necessity to study their microstructure-cellular/porous structure-properties relations, especially in terms of their electrical conductivity and EMI shielding efficiency (EMI SE). To target and control the electrical conductivity through a controlled distribution/dispersion of conductive nanofillers, single or combined (nanohybrids), as there is a direct relation between electrical conductivity and EMI SE, as well as the main EMI shielding mechanisms working on the developed microcellular structure of the foams, which are expected to be absorption-dominated or absorption/multiple reflection-based, are two of the main objectives when combining polymer foaming with the addition of conductive nanofillers. The present review work considers the recent developments and trends on polymer-based foams containing conductive nanofillers, especially carbon-based such as carbon nanotubes or graphene-based materials, as well as similar porous structures created using trending technologies such as 3D printing, for EMI shielding applications. It is divided in different sections, starting with the strategy of microcellular foaming to develop polymer-based foams with enhanced EMI shielding characteristics, especially focusing on technologies and methods using supercritical CO2 (sCO2); continuing with the use of polymer foams as templates to synthesize carbon foams with improved EMI shielding performance for high use temperature applications; the recent strategy of combining different functional (nano)fillers to create hybrid nanofillers/nanohybrids to be used at lower amounts as conductive fillers in polymer foams; the control and selective distribution of the nanofillers in terms of favoring the formation of a more effective conductive network and hence promote the enhancement of the EMI SE; the very recent use of computational approaches to tailor the EMI shielding properties of composite foams; and the very trending possibility of creating cellular components with varied porous structures from these materials using 3D printing; to finish, some future perspectives are discussed.
- 6 December 2023
- Published by MDPI AG in Preprints.org
Open AccessRecent Trends on Polymeric Foams and Porous Structures for Emi Shielding Applications
Polymer-based (nano)composite foams, especially those having a microcellular structure, containing suitable conductive (nano)fillers, have been shown to act as good shielding materials, hence coming as promising to act as shields in electronic devices, limiting/avoiding electromagnetic interference (EMI) pollution. Nevertheless, due to their high (micro)structural complexity, related to their multiphase nature, there is still a lot of unawareness behind the shielding mechanisms acting in these materials, coming as a necessity to study their microstructure-cellular/porous structure-properties relations, especially in terms of their electrical conductivity and EMI shielding efficiency (EMI SE). To target and control the electrical conductivity through a controlled distribution/dispersion of conductive nanofillers, single or combined (nanohybrids), as there is a direct relation between electrical conductivity and EMI SE, as well as the main EMI shielding mechanisms working on the developed microcellular structure of the foams, which are expected to be absorption-dominated or absorption/multiple reflection-based, are two of the main objectives when combining polymer foaming with the addition of conductive nanofillers. The present review work considers the recent developments and trends on polymer-based foams containing conductive nanofillers, especially carbon-based such as carbon nanotubes or graphene-based materials, as well as similar porous structures created using trending technologies such as 3D printing, for EMI shielding applications. It is divided in different sections, starting with the strategy of microcellular foaming to develop polymer-based foams with enhanced EMI shielding characteristics, especially focusing on technologies and methods using supercritical CO2 (sCO2); continuing with the use of polymer foams as templates to synthesize carbon foams with improved EMI shielding performance for high use temperature applications; the recent strategy of combining different functional (nano)fillers to create hybrid nanofillers/nanohybrids to be used at lower amounts as conductive fillers in polymer foams; the control and selective distribution of the nanofillers in terms of favoring the formation of a more effective conductive network and hence promote the enhancement of the EMI SE; the very recent use of computational approaches to tailor the EMI shielding properties of composite foams; and the very trending possibility of creating cellular components with varied porous structures from these materials using 3D printing; to finish, some future perspectives are discussed.
- Open Access
- 12 October 2023
- Published by MDPI AG in Nanomaterials
- Vol. 13 (20) , 2748
Application of Graphene-Based Materials
This Topic on the “Application of Graphene-Based Materials”, which consists of a total of twenty-six articles, including two review articles, written by research groups of experts in the field, considers the most recent research and trends on the synthesis and characterization of graphene-based materials, including nanohybrids, intended for a vast array of high-demanding technological applications, namely batteries/fuel cells, aerogels, laser technology, sensors, electronic/magnetic devices, catalysts, etc
- 12 October 2023
- Published by MDPI AG in Nanomaterials
- Vol. 13 (20) , 2748
Open AccessApplication of Graphene-Based Materials
This Topic on the “Application of Graphene-Based Materials”, which consists of a total of twenty-six articles, including two review articles, written by research groups of experts in the field, considers the most recent research and trends on the synthesis and characterization of graphene-based materials, including nanohybrids, intended for a vast array of high-demanding technological applications, namely batteries/fuel cells, aerogels, laser technology, sensors, electronic/magnetic devices, catalysts, etc
- Open Access
The Effect of Microcellular Structure on the Dynamic Mechanical Thermal Properties of High-Performance Nanocomposite Foams Made of Graphene Nanoplatelets-Filled Polysulfone
Polysulfone nanocomposite foams containing variable amounts of graphene nanoplatelets (0–10 wt%) were prepared by water vapor-induced phase separation (WVIPS) and supercritical CO2 (scCO2) dissolution. WVIPS foams with two ranges of relative densities were considered, namely, between 0.23 and 0.41 and between 0.34 and 0.46. Foams prepared by scCO2 dissolution (0.0–2.0 wt% GnP) were obtained with a relative density range between 0.35 and 0.45. Although the addition of GnP affected the cellular structure of all foams, they had a bigger influence in WVIPS foams. The storage modulus increased for all foams with increasing relative density and GnP’s concentration, except for WVIPS PSU-GnP foams, as they developed open/interconnected cellular structures during foaming. Comparatively, foams prepared by scCO2 dissolution showed higher specific storage moduli than similar WVIPS foams (same relative density and GnP content), explained by the microcellular structure of scCO2 foams. As a result of the plasticizing effect of CO2, PSU foams prepared by scCO2 showed lower glass transition temperatures than WVIPS foams, with the two series of these foams displaying decreasing values with incrementing the amount of GnP.
Open AccessThe Effect of Microcellular Structure on the Dynamic Mechanical Thermal Properties of High-Performance Nanocomposite Foams Made of Graphene Nanoplatelets-Filled Polysulfone
Polysulfone nanocomposite foams containing variable amounts of graphene nanoplatelets (0–10 wt%) were prepared by water vapor-induced phase separation (WVIPS) and supercritical CO2 (scCO2) dissolution. WVIPS foams with two ranges of relative densities were considered, namely, between 0.23 and 0.41 and between 0.34 and 0.46. Foams prepared by scCO2 dissolution (0.0–2.0 wt% GnP) were obtained with a relative density range between 0.35 and 0.45. Although the addition of GnP affected the cellular structure of all foams, they had a bigger influence in WVIPS foams. The storage modulus increased for all foams with increasing relative density and GnP’s concentration, except for WVIPS PSU-GnP foams, as they developed open/interconnected cellular structures during foaming. Comparatively, foams prepared by scCO2 dissolution showed higher specific storage moduli than similar WVIPS foams (same relative density and GnP content), explained by the microcellular structure of scCO2 foams. As a result of the plasticizing effect of CO2, PSU foams prepared by scCO2 showed lower glass transition temperatures than WVIPS foams, with the two series of these foams displaying decreasing values with incrementing the amount of GnP.
- Open Access
Development of Inorganic Particle-Filled Polypropylene/High Density Polyethylene Membranes via Multilayer Co-Extrusion and Stretching
This work is made to ascertain the effects of mineral fillers, namely calcium carbonate and talc, on the morphology and properties of multilayer polypropylene (PP)/high-density polyethylene (HDPE) porous membranes. Multilayer membranes were prepared using the three-stage Melt-Extrusion, Annealing and Uniaxial Stretching (MEAUS) process. The orientation of PP’s crystalline phase was affected by both the flow-induced crystallization and the heterogeneous nucleation promoted by the fillers. A synergistic effect was observed in the filled samples due to the generation of pores after the stretching-induced lamellae separation and the debonding of mineral fillers from the polymeric matrix. The fillers increased the porous surface, leading to an increase of permeance to air, being this effect more marked at higher filler contents. Talc showed a higher efficiency to create porous surfaces when compared to calcium carbonate. The thermal stability of the membranes increased with filler addition, as well as their stiffness and strength.
Open AccessDevelopment of Inorganic Particle-Filled Polypropylene/High Density Polyethylene Membranes via Multilayer Co-Extrusion and Stretching
This work is made to ascertain the effects of mineral fillers, namely calcium carbonate and talc, on the morphology and properties of multilayer polypropylene (PP)/high-density polyethylene (HDPE) porous membranes. Multilayer membranes were prepared using the three-stage Melt-Extrusion, Annealing and Uniaxial Stretching (MEAUS) process. The orientation of PP’s crystalline phase was affected by both the flow-induced crystallization and the heterogeneous nucleation promoted by the fillers. A synergistic effect was observed in the filled samples due to the generation of pores after the stretching-induced lamellae separation and the debonding of mineral fillers from the polymeric matrix. The fillers increased the porous surface, leading to an increase of permeance to air, being this effect more marked at higher filler contents. Talc showed a higher efficiency to create porous surfaces when compared to calcium carbonate. The thermal stability of the membranes increased with filler addition, as well as their stiffness and strength.
- Open Access
- 4 December 2020
- Published by MDPI AG in Nanomaterials
- Vol. 10 (12) , 2425
Electrical Conduction Behavior of High-Performance Microcellular Nanocomposites Made of Graphene Nanoplatelet-Filled Polysulfone
Graphene nanoplatelet (GnP)-filled polysulfone (PSU) cellular nanocomposites, prepared by two different methods—namely, water vapor-induced phase separation (WVIPS) and supercritical CO2 dissolution (scCO2) foaming—were produced with a range of densities from 0.4 to 0.6 g/cm3 and characterized in terms of their structure and electrical conduction behavior. The GnP content was varied from 0 to 10 wt%. The electrical conductivity values were increased with the amount of GnP for the three different studied foam series. The highest values were found for the microcellular nanocomposites prepared by the WVIPS method, reaching as high as 8.17 × 10−2 S/m for 10 wt% GnP. The variation trend of the electrical conductivity for each series was analyzed by applying both the percolation and the tunneling models. Comparatively, the tunneling model showed a better fitting in the prediction of the electrical conductivity. The preparation technique of the cellular nanocomposite affected the resultant cellular structure of the nanocomposite and, as a result, the porosity or gas volume fraction (Vg). A higher porosity resulted in a higher electrical conductivity, with the lightest foams being prepared by the WVIPS method, showing electrical conductivities two orders of magnitude higher than the equivalent foams prepared by the scCO2 dissolution technique.
- 4 December 2020
- Published by MDPI AG in Nanomaterials
- Vol. 10 (12) , 2425
Open AccessElectrical Conduction Behavior of High-Performance Microcellular Nanocomposites Made of Graphene Nanoplatelet-Filled Polysulfone
Graphene nanoplatelet (GnP)-filled polysulfone (PSU) cellular nanocomposites, prepared by two different methods—namely, water vapor-induced phase separation (WVIPS) and supercritical CO2 dissolution (scCO2) foaming—were produced with a range of densities from 0.4 to 0.6 g/cm3 and characterized in terms of their structure and electrical conduction behavior. The GnP content was varied from 0 to 10 wt%. The electrical conductivity values were increased with the amount of GnP for the three different studied foam series. The highest values were found for the microcellular nanocomposites prepared by the WVIPS method, reaching as high as 8.17 × 10−2 S/m for 10 wt% GnP. The variation trend of the electrical conductivity for each series was analyzed by applying both the percolation and the tunneling models. Comparatively, the tunneling model showed a better fitting in the prediction of the electrical conductivity. The preparation technique of the cellular nanocomposite affected the resultant cellular structure of the nanocomposite and, as a result, the porosity or gas volume fraction (Vg). A higher porosity resulted in a higher electrical conductivity, with the lightest foams being prepared by the WVIPS method, showing electrical conductivities two orders of magnitude higher than the equivalent foams prepared by the scCO2 dissolution technique.
- Open Access
Effects of Graphene Nanoplatelets and Cellular Structure on the Thermal Conductivity of Polysulfone Nanocomposite Foams
Polysulfone (PSU) foams containing 0–10 wt% graphene nanoplatelets (GnP) were prepared using two foaming methods. Alongside the analysis of the cellular structure, their thermal conductivity was measured and analyzed. The results showed that the presence of GnP can affect the cellular structure of the foams prepared by both water vapor induced phase separation (WVIPS) and supercritical CO2 (scCO2) dissolution; however, the impact is greater in the case of foams prepared by WVIPS. In terms of thermal conductivity, the analysis showed an increasing trend by incrementing the amount of GnP and increasing relative density, with the tortuosity of the cellular structure, dependent on the used foaming method, relative density, and amount of GnP, playing a key role in the final value of thermal conductivity. The combination of all these factors showed the possibility of preparing PSU-GnP foams with enhanced thermal conductivity at lower GnP amount by carefully controlling the cellular structure and relative density, opening up their use in lightweight heat dissipators.
Open AccessEffects of Graphene Nanoplatelets and Cellular Structure on the Thermal Conductivity of Polysulfone Nanocomposite Foams
Polysulfone (PSU) foams containing 0–10 wt% graphene nanoplatelets (GnP) were prepared using two foaming methods. Alongside the analysis of the cellular structure, their thermal conductivity was measured and analyzed. The results showed that the presence of GnP can affect the cellular structure of the foams prepared by both water vapor induced phase separation (WVIPS) and supercritical CO2 (scCO2) dissolution; however, the impact is greater in the case of foams prepared by WVIPS. In terms of thermal conductivity, the analysis showed an increasing trend by incrementing the amount of GnP and increasing relative density, with the tortuosity of the cellular structure, dependent on the used foaming method, relative density, and amount of GnP, playing a key role in the final value of thermal conductivity. The combination of all these factors showed the possibility of preparing PSU-GnP foams with enhanced thermal conductivity at lower GnP amount by carefully controlling the cellular structure and relative density, opening up their use in lightweight heat dissipators.
- Open Access
Polymeric Foams
Advances in nanotechnology have boosted the development of more efficient materials, with emerging sectors (electronics, energy, aerospace, among others) demanding novel materials to fulfill the complex technical requirements of their products
Open AccessPolymeric Foams
Advances in nanotechnology have boosted the development of more efficient materials, with emerging sectors (electronics, energy, aerospace, among others) demanding novel materials to fulfill the complex technical requirements of their products