Michael Hofbaur
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Michael Hofbaur has a total of 33 co-authors. Here are the top co-authors by number of shared publications:
- Michael Rathmair
Robotics, Joanneum Research, Klagenfurt am Wörthersee, Austria
2 shared publications - Amir Dini
Graz University of Technology
1 shared publication - Barnaba Ubezio
Institute of Smart System Technologies, University of Klagenfurt, Klagenfurt, Austria
1 shared publication - Bernhard Dieber
JOANNEUM RESEARCH
1 shared publication - Bernhard Rinner
Institute of Networked and Embedded Systems, University of Klagenfurt, Klagenfurt, Austria
1 shared publication - Cecilia Scoccia
Università Politecnica delle Marche
1 shared publication
Latest Publications
- Open Access
- 19 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 13, 215056-215066
Using Auxiliary Mirrors for Improved Surface Coverage in Depth Scanning
Depth cameras have become an integral part of a wide range of applications, including industrial inspection, reverse engineering, human–robot collaboration, and biomechanical analysis. Their practical use, however, is limited by a narrow field of view and self-occlusions, which often prevent complete surface coverage of the scanned object. This paper introduces a methodology for systematically determining the optimal placement of a depth camera and an auxiliary planar mirror to maximize surface visibility. To this end, a simulation tool was developed that models camera rays, their reflections from the mirror, and their intersections with objects. The proposed method combines geometric visibility analysis with an optimization procedure that searches for configurations with maximum coverage. Validation was performed on a set of twenty objects ranging from simple geometric primitives to complex reference models. While a standalone camera achieved an average coverage of 51.68 %, the addition of a single planar mirror increased this value to 85.46 %, with complete coverage achieved for several objects. A complementary user study demonstrated that manually chosen configurations exhibit high variability and do not outperform the algorithmic design. The results confirm that the use of mirrors provides a cost-effective solution for overcoming occlusion-related limitations without resorting to multi-camera systems, and that the proposed methodology delivers consistent performance across diverse object geometries. The approach is particularly applicable in industrial inspection, robotic vision, and other domains where complete geometric information is essential.
- 19 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 13, 215056-215066
Open AccessUsing Auxiliary Mirrors for Improved Surface Coverage in Depth Scanning
Depth cameras have become an integral part of a wide range of applications, including industrial inspection, reverse engineering, human–robot collaboration, and biomechanical analysis. Their practical use, however, is limited by a narrow field of view and self-occlusions, which often prevent complete surface coverage of the scanned object. This paper introduces a methodology for systematically determining the optimal placement of a depth camera and an auxiliary planar mirror to maximize surface visibility. To this end, a simulation tool was developed that models camera rays, their reflections from the mirror, and their intersections with objects. The proposed method combines geometric visibility analysis with an optimization procedure that searches for configurations with maximum coverage. Validation was performed on a set of twenty objects ranging from simple geometric primitives to complex reference models. While a standalone camera achieved an average coverage of 51.68 %, the addition of a single planar mirror increased this value to 85.46 %, with complete coverage achieved for several objects. A complementary user study demonstrated that manually chosen configurations exhibit high variability and do not outperform the algorithmic design. The results confirm that the use of mirrors provides a cost-effective solution for overcoming occlusion-related limitations without resorting to multi-camera systems, and that the proposed methodology delivers consistent performance across diverse object geometries. The approach is particularly applicable in industrial inspection, robotic vision, and other domains where complete geometric information is essential.
- Open Access
- 23 July 2024
- Published by Springer Nature in Journal of Intelligent & Robotic Systems
- Vol. 110 (3) , 1-21
Experimental Assessment of a Vision-Based Obstacle Avoidance Strategy for Robot Manipulators: Off-line Trajectory Planning and On-line Motion Control
Human-Robot Interaction is an increasingly important topic in both research and industry fields. Since human safety must be always guaranteed and accidental contact with the operator avoided, it is necessary to investigate real-time obstacle avoidance strategies. The transfer from simulation environments, where algorithms are tested, to the real world is challenging from different points of view, e.g., the continuous tracking of the obstacle and the configuration of different manipulators. In this paper, the authors describe the implementation of a collision avoidance strategy based on the potential field method for off-line trajectory planning and on-line motion control, paired with the Motion Capture system Optitrack PrimeX 22 for obstacle tracking. Several experiments show the performance of the proposed strategy in the case of a fixed and dynamic obstacle, disturbing the robot’s trajectory from multiple directions. Two different avoidance modalities are adapted and tested for both standard and redundant robot manipulators. The results show the possibility of safely implementing the proposed avoidance strategy on real systems.
- 23 July 2024
- Published by Springer Nature in Journal of Intelligent & Robotic Systems
- Vol. 110 (3) , 1-21
Open AccessExperimental Assessment of a Vision-Based Obstacle Avoidance Strategy for Robot Manipulators: Off-line Trajectory Planning and On-line Motion Control
Human-Robot Interaction is an increasingly important topic in both research and industry fields. Since human safety must be always guaranteed and accidental contact with the operator avoided, it is necessary to investigate real-time obstacle avoidance strategies. The transfer from simulation environments, where algorithms are tested, to the real world is challenging from different points of view, e.g., the continuous tracking of the obstacle and the configuration of different manipulators. In this paper, the authors describe the implementation of a collision avoidance strategy based on the potential field method for off-line trajectory planning and on-line motion control, paired with the Motion Capture system Optitrack PrimeX 22 for obstacle tracking. Several experiments show the performance of the proposed strategy in the case of a fixed and dynamic obstacle, disturbing the robot’s trajectory from multiple directions. Two different avoidance modalities are adapted and tested for both standard and redundant robot manipulators. The results show the possibility of safely implementing the proposed avoidance strategy on real systems.
- 18 August 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Robotics
- Vol. 39 (1) , 755-767
Kinematic Redundancy Analysis for (2$n$+1)R Circular Manipulators
The kinematic analysis of redundant serial manipulators with$2n+1$ revolute joints (integer$n \ge 3$ ), which we call circular manipulators, is presented in this article. The structure of the kinematic chain of circular manipulators has special properties that can be seen in the Denavit–Hartenberg parameters: all orthogonal distances are zero, all even-numbered offsets are zeros, but odd-numbered offsets are not. Typical manipulators that fulfill these properties are redundant 7R serial chains ($n=3$ ) that mimic the human arm, e.g., the lightweight robot arm KUKA LBR iiwa. This 7R circular manipulator has self-motion as rotation around an axis that goes through two fixed points for a fixed pose. First, radical reparametrization is presented based on the swivel angle of the closed-form inverse kinematics solution for the 7R circular manipulator. Second, for a six-dimensional task, the inverse kinematics solution for redundant serial manipulators with$2n+1$ revolute joints ($n\ge 3$ ) is reparametrized by the swivel angle and other$2n-6$ rotation parameters. From a geometric point of view, for a circular manipulator with$2n+1$ revolute joints, one can have${n(n-1)}/{2}$ choices of such circular rotations. Third, we conjecture numerical kinematic singularities for circular manipulators in a recursive formula, confirming$n=5,6,7$ .- 18 August 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Robotics
- Vol. 39 (1) , 755-767
Kinematic Redundancy Analysis for (2$n$+1)R Circular Manipulators
The kinematic analysis of redundant serial manipulators with$2n+1$ revolute joints (integer$n \ge 3$ ), which we call circular manipulators, is presented in this article. The structure of the kinematic chain of circular manipulators has special properties that can be seen in the Denavit–Hartenberg parameters: all orthogonal distances are zero, all even-numbered offsets are zeros, but odd-numbered offsets are not. Typical manipulators that fulfill these properties are redundant 7R serial chains ($n=3$ ) that mimic the human arm, e.g., the lightweight robot arm KUKA LBR iiwa. This 7R circular manipulator has self-motion as rotation around an axis that goes through two fixed points for a fixed pose. First, radical reparametrization is presented based on the swivel angle of the closed-form inverse kinematics solution for the 7R circular manipulator. Second, for a six-dimensional task, the inverse kinematics solution for redundant serial manipulators with$2n+1$ revolute joints ($n\ge 3$ ) is reparametrized by the swivel angle and other$2n-6$ rotation parameters. From a geometric point of view, for a circular manipulator with$2n+1$ revolute joints, one can have${n(n-1)}/{2}$ choices of such circular rotations. Third, we conjecture numerical kinematic singularities for circular manipulators in a recursive formula, confirming$n=5,6,7$ .- 23 April 2022
- Published by Springer Nature
- p. 89-96
Towards Dynamic Obstacle Avoidance for Robot Manipulators with Deep Reinforcement Learning
- 23 April 2022
- Published by Springer Nature
- p. 89-96
Towards Dynamic Obstacle Avoidance for Robot Manipulators with Deep Reinforcement Learning
- 3 August 2020
- Published by Springer Nature in e+i Elektrotechnik und Informationstechnik
- Vol. 137 (6) , 283-290
Sichere und zuverlässige mobile Manipulation
- 3 August 2020
- Published by Springer Nature in e+i Elektrotechnik und Informationstechnik
- Vol. 137 (6) , 283-290
Sichere und zuverlässige mobile Manipulation
- 21 October 2019
- Published by Springer Nature in e+i Elektrotechnik und Informationstechnik
- Vol. 136 (7) , 301-306
Physische Sicherheit in der Mensch-Roboter Kollaboration
- 21 October 2019
- Published by Springer Nature in e+i Elektrotechnik und Informationstechnik
- Vol. 136 (7) , 301-306
Physische Sicherheit in der Mensch-Roboter Kollaboration
- 1 September 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 4354-4361
Measurement and prediction of situation awareness in human-robot interaction based on a framework of probabilistic attention
Human attention processes play a major role in the optimization of human-robot interaction (HRI) systems. This work describes a novel methodology to measure and predict situation awareness and from this overall performance from gaze features in real-time. The awareness about scene objects of interest is described by 3D gaze analysis using data from wearable eye tracking glasses and a precise optical tracking system. A probabilistic framework of uncertainty considers coping with measurement errors in eye and position estimation. Comprehensive experiments on HRI were conducted with typical tasks including handover in a lab based prototypical manufacturing environment. The methodology is proven to predict standard measures of situation awareness (SAGAT, SART) as well as performance in the HRI task in real-time and will open new opportunities for human factors based performance optimization in HRI applications.
- 1 September 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 4354-4361
Measurement and prediction of situation awareness in human-robot interaction based on a framework of probabilistic attention
Human attention processes play a major role in the optimization of human-robot interaction (HRI) systems. This work describes a novel methodology to measure and predict situation awareness and from this overall performance from gaze features in real-time. The awareness about scene objects of interest is described by 3D gaze analysis using data from wearable eye tracking glasses and a precise optical tracking system. A probabilistic framework of uncertainty considers coping with measurement errors in eye and position estimation. Comprehensive experiments on HRI were conducted with typical tasks including handover in a lab based prototypical manufacturing environment. The methodology is proven to predict standard measures of situation awareness (SAGAT, SART) as well as performance in the HRI task in real-time and will open new opportunities for human factors based performance optimization in HRI applications.
- 5 May 2015
- Published by Springer Nature
- p. 99-110
A Method to Estimate the Encoder Dependent Repeatability of General Serial Manipulators
- 5 May 2015
- Published by Springer Nature
- p. 99-110
A Method to Estimate the Encoder Dependent Repeatability of General Serial Manipulators
- 1 January 2008
- Published by European Alliance for Innovation n.o.
Collaborative microdrones: applications and research challenges
- 1 January 2008
- Published by European Alliance for Innovation n.o.
Collaborative microdrones: applications and research challenges