Ricky Carvel
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Ricky Carvel has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
Abdel Sanad
1 shared publicationArnas Vaitkevicius
University of Edinburgh
1 shared publication- Asif Usmani
Hong Kong Polytechnic Univ
1 shared publication Chia Lung Wu
The University of Edinburgh
1 shared publicationChia-Lung Wu
Department of Fire Science, Central Police University, Taoyuan city, Taiwan (R.O.C)
1 shared publication- Emma Byrne
School of Engineering, University of Edinburgh, United Kingdom
1 shared publication
Latest Publications
- Open Access
- 1 September 2025
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 3121 (1)
Discover Localized Flashover Within A Non-linear Dynamic Model
“Localized flashover” is a phenomenon been described that full involvement of combustibles within part of the compartment, which is favorable to this phenomenon due to the unevenly heat distribution which cause only part of the compartment encounters “thermal instability”, this paper proves that even within traditional two smoke layers condition, it still happened, and the main factors to distinct the situation from classic flashover are ventilation factor, ceiling area, fuel property (the ratio between heat of combustion and vaporization), and the temperature ratio between the smoke layer and the ambience.
- 1 September 2025
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 3121 (1)
Open AccessDiscover Localized Flashover Within A Non-linear Dynamic Model
“Localized flashover” is a phenomenon been described that full involvement of combustibles within part of the compartment, which is favorable to this phenomenon due to the unevenly heat distribution which cause only part of the compartment encounters “thermal instability”, this paper proves that even within traditional two smoke layers condition, it still happened, and the main factors to distinct the situation from classic flashover are ventilation factor, ceiling area, fuel property (the ratio between heat of combustion and vaporization), and the temperature ratio between the smoke layer and the ambience.
- Open Access
- 21 November 2019
- Published by Springer Nature in Fire Technology
- Vol. 56 (3) , 937-957
Critical Factors Determining the Onset of Backdraft Using Solid Fuels
Backdraft is an explosive fire phenomenon which typically occurs during fire-fighting activities, occasionally leading to fire-fighter fatalities. Real backdraft incidents involve complex fuel gas mixtures consisting of the products of underventilated burning and pyrolysis following burnout. However, most experimental research into backdraft has used methane gas or flammable liquids as fuel. Some aspects of real backdraft behavior may have been overlooked as a consequence of this simplicity. A reduced scale series of compartment fire tests have been carried out to investigate the critical factors governing the onset of backdraft, using polypropylene and high density polyethylene samples as fuel. It is established that there are critical temperatures for auto-ignition of the pyrolysis gases leading to backdraft which vary with fuel properties. For polypropylene the highest temperature in the compartment must be above 350°C for auto-ignition of the fuel gases, while mixtures in the presence of a pilot source can be ignited down to about 320°C. Backdraft cannot occur when the compartment temperature is below 320°C. For polyethylene, the corresponding temperature for auto-ignition is 320°C. In parallel with these tests, a series of pyrolysis investigations have been carried out using the fire propagation apparatus, with FTIR gas analysis. The observed critical temperatures for backdraft correlate well with the evolved pyrolysis gases. Analysis shows that higher temperatures are required for backdraft when the CO/CO2 ratio is small, and that below the auto-ignition temperature, backdraft can only occur above a CO/CO2 ratio of about 35%. It is concluded that the crucial factors determining whether backdraft occurs or not are the maximum temperature and the CO/CO2 ratio in the compartment, prior to opening the door.
- 21 November 2019
- Published by Springer Nature in Fire Technology
- Vol. 56 (3) , 937-957
Open AccessCritical Factors Determining the Onset of Backdraft Using Solid Fuels
Backdraft is an explosive fire phenomenon which typically occurs during fire-fighting activities, occasionally leading to fire-fighter fatalities. Real backdraft incidents involve complex fuel gas mixtures consisting of the products of underventilated burning and pyrolysis following burnout. However, most experimental research into backdraft has used methane gas or flammable liquids as fuel. Some aspects of real backdraft behavior may have been overlooked as a consequence of this simplicity. A reduced scale series of compartment fire tests have been carried out to investigate the critical factors governing the onset of backdraft, using polypropylene and high density polyethylene samples as fuel. It is established that there are critical temperatures for auto-ignition of the pyrolysis gases leading to backdraft which vary with fuel properties. For polypropylene the highest temperature in the compartment must be above 350°C for auto-ignition of the fuel gases, while mixtures in the presence of a pilot source can be ignited down to about 320°C. Backdraft cannot occur when the compartment temperature is below 320°C. For polyethylene, the corresponding temperature for auto-ignition is 320°C. In parallel with these tests, a series of pyrolysis investigations have been carried out using the fire propagation apparatus, with FTIR gas analysis. The observed critical temperatures for backdraft correlate well with the evolved pyrolysis gases. Analysis shows that higher temperatures are required for backdraft when the CO/CO2 ratio is small, and that below the auto-ignition temperature, backdraft can only occur above a CO/CO2 ratio of about 35%. It is concluded that the crucial factors determining whether backdraft occurs or not are the maximum temperature and the CO/CO2 ratio in the compartment, prior to opening the door.
- 1 November 2018
- Published by Elsevier in Tunnelling and Underground Space Technology
- Vol. 81, 306-314
Fires in Ducts: A review of the early research which underpins modern tunnel fire safety engineering
- 1 November 2018
- Published by Elsevier in Tunnelling and Underground Space Technology
- Vol. 81, 306-314
Fires in Ducts: A review of the early research which underpins modern tunnel fire safety engineering
- 1 September 2018
- Published by Elsevier in Journal of Constructional Steel Research
- Vol. 148, 707-719
Fire resistance of composite steel & concrete highway bridges
- 1 September 2018
- Published by Elsevier in Journal of Constructional Steel Research
- Vol. 148, 707-719
Fire resistance of composite steel & concrete highway bridges
- 7 August 2015
- Published by Springer Nature in Fire Technology
- Vol. 51 (6) , 1511-1513
Tunnel Fire Dynamics
- 7 August 2015
- Published by Springer Nature in Fire Technology
- Vol. 51 (6) , 1511-1513
Tunnel Fire Dynamics
- 18 July 2015
- Published by Springer Nature in Fire Technology
- Vol. 52 (5) , 1619-1628
Investigating the Throttling Effect in Tunnel Fires
- 18 July 2015
- Published by Springer Nature in Fire Technology
- Vol. 52 (5) , 1619-1628
Investigating the Throttling Effect in Tunnel Fires
- 17 March 2010
- Published by Elsevier in Tunnelling and Underground Space Technology
- Vol. 25 (4) , 423-432
Analysis of the ventilation systems in the Dartford tunnels using a multi-scale modelling approach
- 17 March 2010
- Published by Elsevier in Tunnelling and Underground Space Technology
- Vol. 25 (4) , 423-432
Analysis of the ventilation systems in the Dartford tunnels using a multi-scale modelling approach