Fabian Rojas

Chile, recognized as one of the world’s most earthquake-prone nations, has gained valuable insights from significant earthquakes, such as those in 1985 and 2010, which have influenced updates to the nation’s design codes. Although Chile’s seismic design approach has been largely effective in recent earthquakes and demonstrated an “operational” performance level in most structures, performance-based design (PBD) methods have not yet been officially incorporated as valid approaches in the Chilean seismic design codes for buildings. However, in 2017, the Chilean Association on Seismology and Earthquake Engineering (ACHISINA) introduced a PBD approach, primarily for verification purposes, based on the Los Angeles Tall Buildings Structural Design Council (LATBSDC) framework. In this work, firstly, we provide an overview of Chile’s PBD methodology, focusing on the thresholds for various performance levels. These levels are established through experimental and numerical analysis, correlating performance with permissible damage levels. The second part of the paper examines the seismic performance of a residential building, designed before the 2010 Maule earthquake and subsequently damaged, using Chile’s PBD guidelines. This case study highlights the implementation and effectiveness of PBD for assessing seismic resilience in Chilean structures.

Low cycle fatigue life of high-strength reinforcing steel bars (ASTM A706 Grade 80), using photogrammetry by RGB methodology is evaluated. Fatigue tests are performed on specimens under constant axial displacement with total strain amplitudes ranging from 0.01 to 0.05. The experimental observations indicate that buckling of high-strength reinforcing bars results in a damaging degradation of their fatigue life performance as the slenderness ratio increases, including an early rebar failure as the total strain amplitude increases since it achieves the plastic range faster. In addition to this, the results show that the ratio of the ultimate tensile strength to yield strength satisfies the minimum of 1.25 specified in ASTM A706 for reinforcement. On the other hand, the RGB methodology indicates that the axial strains measured by photogrammetry provide more accurate data since the registered results by the traditional experimental setup do not detect second-order effects, such as slippage or lengthening of the specimens within the clamps. Moreover, the RGB filter is faster than digital image correlation (DIC) because the RGB methodology requires a fewer computational cost than DIC algorithms. The RGB methodology allows to reduce the total strain amplitude up to 45% compared to the results obtained by the traditional setup. Finally, models relating total strain amplitude with half-cycles to failure and total strain amplitude with total energy dissipated for multiple slenderness ratios (L/d of 5, 10, and 15) are obtained.