Mahesh Padaki
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Mahesh Padaki has a total of 107 co-authors. Here are the top co-authors by number of shared publications:
- R. Geetha Balakrishna
Centre for Nano and Material Sciences, Jain University, Bangalore, Karnataka 562112, India
17 shared publications - Doddahalli Hanumantharayudu Nagaraju
REVA University
10 shared publications Nagaraj S. Naik
Centre for Nano and Material Sciences, JAIN (Deemed-to-be) University, Jain Global Campus, Kanakapura, Ramanagara, Bangalore 562112, Karnataka, India
8 shared publications- Srinivasa Budagumpi
Centre for Nano and Material Sciences, JAIN (Deemed−to−be University), Jain Global Campus, Kanakapura, Bangalore, Karnataka 562112, India
7 shared publications Prajwal Sherugar
Department of Chemistry, School of Applied Sciences, REVA University, Yelahanka, Bengaluru, Karnataka 560064, India
6 shared publications- Sébastien Déon
Institut UTINAM (UMR CNRS 6213), Université de Bourgogne Franche-Comté, 16 route de Gray, CEDEX, 25030 Besançon, France
6 shared publications
Latest Publications
- 2 October 2026
- Published by Wiley in Journal of Polymer Science
- Vol. 64 (22) , 4710-4720
Near‐Neutral Charge Hybrid Functionalized Polysulfone Membranes for Superior Permeate Flux and Antifouling Performance
We have developed an inexpensive hybrid membrane with near‐neutral surface charge that exhibited approximately 3‐fold higher permeate flux than the polysulfone (PSF) membrane along with excellent antifouling properties. The PSF membrane modified with graphene oxide, GO (M1), amine‐functionalized graphene oxide, AGO (M2), and hybrid GO/AGO (fGO, M3) were characterized using ATR‐FTIR, XRD, FESEM, zeta potential, contact angle, water uptake, and porosity analyses. GO incorporation imparted a negative surface charge with a zeta potential of −20.8 mV, porosity of 38.2%, and water uptake capacity, resulting in the highest permeate flux. In contrast, AGO modification produced a positively charged membrane at +25.32 mV with porosity of 40% and high water uptake capacity of 85.6%, strengthening dye‐membrane interactions but with lower flux. Notably, the PSF/fGO membrane exhibited a near‐neutral zeta potential of −0.23 mV, porosity of 72.5%, and water uptake capacity of 93%, indicating partial charge compensation between the GO and AGO derived functionalities. The fGO membrane effectively rejected both cationic and anionic dyes while exhibiting high flux recovery and reduced irreversible fouling. Overall, the GO and AGO hybrid provided a favorable balance between permeability, dye rejection, and antifouling performance, demonstrating its potential for dye‐containing wastewater treatment.
- 2 October 2026
- Published by Wiley in Journal of Polymer Science
- Vol. 64 (22) , 4710-4720
Near‐Neutral Charge Hybrid Functionalized Polysulfone Membranes for Superior Permeate Flux and Antifouling Performance
We have developed an inexpensive hybrid membrane with near‐neutral surface charge that exhibited approximately 3‐fold higher permeate flux than the polysulfone (PSF) membrane along with excellent antifouling properties. The PSF membrane modified with graphene oxide, GO (M1), amine‐functionalized graphene oxide, AGO (M2), and hybrid GO/AGO (fGO, M3) were characterized using ATR‐FTIR, XRD, FESEM, zeta potential, contact angle, water uptake, and porosity analyses. GO incorporation imparted a negative surface charge with a zeta potential of −20.8 mV, porosity of 38.2%, and water uptake capacity, resulting in the highest permeate flux. In contrast, AGO modification produced a positively charged membrane at +25.32 mV with porosity of 40% and high water uptake capacity of 85.6%, strengthening dye‐membrane interactions but with lower flux. Notably, the PSF/fGO membrane exhibited a near‐neutral zeta potential of −0.23 mV, porosity of 72.5%, and water uptake capacity of 93%, indicating partial charge compensation between the GO and AGO derived functionalities. The fGO membrane effectively rejected both cationic and anionic dyes while exhibiting high flux recovery and reduced irreversible fouling. Overall, the GO and AGO hybrid provided a favorable balance between permeability, dye rejection, and antifouling performance, demonstrating its potential for dye‐containing wastewater treatment.
- Open Access
- 2 September 2026
- Published by Royal Society of Chemistry (RSC) in RSC Sustainability
- Vol. 4 (9) , 3282-3296
Pioneering materials for organic solvent nanofiltration and their future prospects in organic liquid–liquid separation
This review article envisions the role of organic and inorganic materials employed in organic solvent nanofiltration (OSN) and presents prospects on organic liquid–liquid separation.
- 2 September 2026
- Published by Royal Society of Chemistry (RSC) in RSC Sustainability
- Vol. 4 (9) , 3282-3296
Open AccessPioneering materials for organic solvent nanofiltration and their future prospects in organic liquid–liquid separation
This review article envisions the role of organic and inorganic materials employed in organic solvent nanofiltration (OSN) and presents prospects on organic liquid–liquid separation.
- 18 August 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (34) , 46406-46419
Capacitive-Dominant Ion Storage in Electronically Coupled Vanadium Hexacyanoferrate/rGO for Efficient Capacitive Deionization Devices
The rational design of electrodes with hierarchically interconnected porosity and abundant redox-active channels is essential for high-performance capacitive deionization (CDI). Herein, vanadium hexacyanoferrate (VHCF) is integrated with reduced graphene oxide (rGO) to demonstrate a strongly coupled intercalation-type hybrid electrode that exhibits a pronounced morphological evolution from densely aggregated particles to a rosette-like nanosheet architecture, significantly improving electrolyte accessibility, active-site exposure, and ion-transport pathways. Electronic interaction at the rGO−VHCF interface facilitates charge redistribution, as indicated by binding-energy shifts and the stabilization of mixed-valence V and Fe states in XPS analysis. Notably, XPS reveals a ∼0.5 eV negative shift in the V3+ binding energy, confirming interfacial electron transfer from rGO to VHCF and increased electron density at vanadium centers. This electronic coupling activates additional redox centers, lowers charge-transfer resistance, and accelerates reaction kinetics, delivering enhanced charge storage (328.59 F/g at 1 A/g) with reduced polarization and reveals a dominant surface-controlled pseudocapacitance, indicating interfacial charge storage. Electrochemical quartz crystal microbalance (EQCM) measurements directly correlate charge transfer with reversible Na+-associated mass variations, confirming synchronized electron−ion transport and minimal ion trapping. In asymmetric CDI configuration, VHCF/rGO cathode and mesoporous carbon as anode achieve a high-salt adsorption capacity of 78.97 mg/g nearly double that of VHCF (37.40 mg/g). Additionally, the system demonstrates rapid electrosorption kinetic and low-energy consumption (0.65 kJ/mol) in Na2SO4. The synergistic integration of electronic coupling, defect-enriched active sites, and efficient ion-diffusion channels establishes VHCF/rGO as a robust, high-efficiency electrode for next-generation CDI systems.
- 18 August 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (34) , 46406-46419
Capacitive-Dominant Ion Storage in Electronically Coupled Vanadium Hexacyanoferrate/rGO for Efficient Capacitive Deionization Devices
The rational design of electrodes with hierarchically interconnected porosity and abundant redox-active channels is essential for high-performance capacitive deionization (CDI). Herein, vanadium hexacyanoferrate (VHCF) is integrated with reduced graphene oxide (rGO) to demonstrate a strongly coupled intercalation-type hybrid electrode that exhibits a pronounced morphological evolution from densely aggregated particles to a rosette-like nanosheet architecture, significantly improving electrolyte accessibility, active-site exposure, and ion-transport pathways. Electronic interaction at the rGO−VHCF interface facilitates charge redistribution, as indicated by binding-energy shifts and the stabilization of mixed-valence V and Fe states in XPS analysis. Notably, XPS reveals a ∼0.5 eV negative shift in the V3+ binding energy, confirming interfacial electron transfer from rGO to VHCF and increased electron density at vanadium centers. This electronic coupling activates additional redox centers, lowers charge-transfer resistance, and accelerates reaction kinetics, delivering enhanced charge storage (328.59 F/g at 1 A/g) with reduced polarization and reveals a dominant surface-controlled pseudocapacitance, indicating interfacial charge storage. Electrochemical quartz crystal microbalance (EQCM) measurements directly correlate charge transfer with reversible Na+-associated mass variations, confirming synchronized electron−ion transport and minimal ion trapping. In asymmetric CDI configuration, VHCF/rGO cathode and mesoporous carbon as anode achieve a high-salt adsorption capacity of 78.97 mg/g nearly double that of VHCF (37.40 mg/g). Additionally, the system demonstrates rapid electrosorption kinetic and low-energy consumption (0.65 kJ/mol) in Na2SO4. The synergistic integration of electronic coupling, defect-enriched active sites, and efficient ion-diffusion channels establishes VHCF/rGO as a robust, high-efficiency electrode for next-generation CDI systems.
- 1 March 2026
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 65 (9) , 5150-5165
Charge-Driven and Interfacial Interactions in MOF-801(Ce)/PVDF Nanocomposite Membranes for Pharmaceutical Removal
- 1 March 2026
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 65 (9) , 5150-5165
Charge-Driven and Interfacial Interactions in MOF-801(Ce)/PVDF Nanocomposite Membranes for Pharmaceutical Removal
- 1 January 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 14 (43) , 29447-29462
Capacitive versus diffusion controlled mechanism in a mesoporous cobalt hexacyanoferrate/carbon composite for a high-performance capacitive deionization device: electrochemical quartz crystal microbalance (EQCM) studies
Schematic illustrates Meso-CoHCF PBA/mesoporous carbon enhances ion diffusion and desalination pathways. HCDI results demonstrate higher salt adsorption capacity and lower energy consumption across different electrolytes.
- 1 January 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 14 (43) , 29447-29462
Capacitive versus diffusion controlled mechanism in a mesoporous cobalt hexacyanoferrate/carbon composite for a high-performance capacitive deionization device: electrochemical quartz crystal microbalance (EQCM) studies
Schematic illustrates Meso-CoHCF PBA/mesoporous carbon enhances ion diffusion and desalination pathways. HCDI results demonstrate higher salt adsorption capacity and lower energy consumption across different electrolytes.
- 15 December 2025
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 8 (51) , 24560-24573
“Unlocking the Potential of Polymorphs of MnO 2 Nanomaterials for Intercalative Symmetrical Capacitive Deionization Devices”
- 15 December 2025
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 8 (51) , 24560-24573
“Unlocking the Potential of Polymorphs of MnO 2 Nanomaterials for Intercalative Symmetrical Capacitive Deionization Devices”
- 2 October 2025
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 17 (38) , 22086-22099
Advancing supercapacitors with graphene-based 2D–2D heterostructures and heteroatom engineering
Graphene-based two-dimensional heterostructures are gaining attention as promising solutions for supercapacitor applications.
- 2 October 2025
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 17 (38) , 22086-22099
Advancing supercapacitors with graphene-based 2D–2D heterostructures and heteroatom engineering
Graphene-based two-dimensional heterostructures are gaining attention as promising solutions for supercapacitor applications.
- 28 August 2025
- Published by Wiley in Polymers for Advanced Technologies
- Vol. 36 (9)
In Situ B‐ gC 3 N 4 Mixed Matrix Membrane Strategy for Enhanced Dye Removal: A Pathway to Exceptional Water Purification Efficiency
The in situ synthesized boron‐doped graphitic carbon nitride (B‐gC 3 N 4 ) composite exhibits significant potential as an advanced and efficient solution for wastewater treatment. This study demonstrates that incorporating B‐gC 3 N 4 into polysulfone (Psf) membranes offers a promising approach to improving the efficiency of organic dye removal from water. The B‐gC 3 N 4 was synthesized through a simple thermal polymerization method with in situ boron doping. The fabrication and performance of B‐gC 3 N 4 composite membranes with 2.5, 5, and 7.5 wt.% were examined. Performance evaluations focused on the removal efficiency of congo red (CR) (97.95%), evans blue (EVB) (98.99%), eriochrome black tea (EBT) (94.46%), alcian blue (AB) (> 99.9%), malachite green (MG) (> 99%) and methyl blue (MB) (> 99%) respectively. However, the membrane showed excellent antifouling behavior by showing a flux recovery ratio of 89.4% with the rejection of bovine serum albumin (BSA) observed at 89.85%. A long‐term stability study using an optimum membrane of 5 wt% B‐gC 3 N 4 showed a consistent rejection rate of 94.57% over 48 h and a flux of 83.87 L/m 2 /h for CR. The improved performance is ascribed to the amplified surface area and improved hydrophilicity of the B‐gC 3 N 4 component. By demonstrating outstanding flux performance, B‐gC 3 N 4 /Psf membranes offer an active and justifiable solution for the elimination of organic dyes from contaminated water.
- 28 August 2025
- Published by Wiley in Polymers for Advanced Technologies
- Vol. 36 (9)
In Situ B‐ gC 3 N 4 Mixed Matrix Membrane Strategy for Enhanced Dye Removal: A Pathway to Exceptional Water Purification Efficiency
The in situ synthesized boron‐doped graphitic carbon nitride (B‐gC 3 N 4 ) composite exhibits significant potential as an advanced and efficient solution for wastewater treatment. This study demonstrates that incorporating B‐gC 3 N 4 into polysulfone (Psf) membranes offers a promising approach to improving the efficiency of organic dye removal from water. The B‐gC 3 N 4 was synthesized through a simple thermal polymerization method with in situ boron doping. The fabrication and performance of B‐gC 3 N 4 composite membranes with 2.5, 5, and 7.5 wt.% were examined. Performance evaluations focused on the removal efficiency of congo red (CR) (97.95%), evans blue (EVB) (98.99%), eriochrome black tea (EBT) (94.46%), alcian blue (AB) (> 99.9%), malachite green (MG) (> 99%) and methyl blue (MB) (> 99%) respectively. However, the membrane showed excellent antifouling behavior by showing a flux recovery ratio of 89.4% with the rejection of bovine serum albumin (BSA) observed at 89.85%. A long‐term stability study using an optimum membrane of 5 wt% B‐gC 3 N 4 showed a consistent rejection rate of 94.57% over 48 h and a flux of 83.87 L/m 2 /h for CR. The improved performance is ascribed to the amplified surface area and improved hydrophilicity of the B‐gC 3 N 4 component. By demonstrating outstanding flux performance, B‐gC 3 N 4 /Psf membranes offer an active and justifiable solution for the elimination of organic dyes from contaminated water.
- Open Access
- 28 August 2025
- Published by Royal Society of Chemistry (RSC) in Materials Advances
- Vol. 6 (19) , 6894-6906
Revolutionizing environmental clean-up: novel CORN-MOF-2/PVDF composite membranes for the removal of multi-pollutants
The increasing prevalence of complex multi-pollutants, including heavy metals, dyes, and pharmaceutical residues, in wastewater streams demands advanced materials capable of efficient and selective separation. This study addresses the critical challenge of removal of diverse pollutants by developing CORN-MOF-2/PVDF composite membranes, in which novel CORN-MOF-2(Ce) was functionalized into a PVDF matrix by a nonsolvent-induced phase-inversion method (NIPS). The introduced MOF enhanced the hydrophilicity of the resulting membranes and provided a higher permeability of 434.95 L m−2 h−1 bar−1. Membrane performance was evaluated through a series of filtration tests using synthetic wastewater containing heavy metal ions, dyes and pharmaceutical compounds. The CORN-MOF-2/PVDF membranes transitioned into a more selective interface, leading to absolute rejection of a wide range of pollutants—99% for dopamine hydrochloride (DP), Cr2O7 2−, Alcian blue (AB), and Congo red (CR). Furthermore, the study extended to investigate the removal efficiency of the optimized membrane under different pH conditions, achieving optimal performance at neutral pH. A combination of size exclusion, affinity-based bonding, and charge-based interactions was followed to attain superior rejection rates. The simultaneous removal of multiple pollutants from the aqueous system demonstrates the superior versatility and efficiency of the fabricated membranes in handling complex multi-component contaminations. The treated water resulting from this work adheres to the WHO's standards for safe water. Additionally, antifouling studies showed a flux recovery ratio of >95% after multiple cycles.
- 28 August 2025
- Published by Royal Society of Chemistry (RSC) in Materials Advances
- Vol. 6 (19) , 6894-6906
Open AccessRevolutionizing environmental clean-up: novel CORN-MOF-2/PVDF composite membranes for the removal of multi-pollutants
The increasing prevalence of complex multi-pollutants, including heavy metals, dyes, and pharmaceutical residues, in wastewater streams demands advanced materials capable of efficient and selective separation. This study addresses the critical challenge of removal of diverse pollutants by developing CORN-MOF-2/PVDF composite membranes, in which novel CORN-MOF-2(Ce) was functionalized into a PVDF matrix by a nonsolvent-induced phase-inversion method (NIPS). The introduced MOF enhanced the hydrophilicity of the resulting membranes and provided a higher permeability of 434.95 L m−2 h−1 bar−1. Membrane performance was evaluated through a series of filtration tests using synthetic wastewater containing heavy metal ions, dyes and pharmaceutical compounds. The CORN-MOF-2/PVDF membranes transitioned into a more selective interface, leading to absolute rejection of a wide range of pollutants—99% for dopamine hydrochloride (DP), Cr2O7 2−, Alcian blue (AB), and Congo red (CR). Furthermore, the study extended to investigate the removal efficiency of the optimized membrane under different pH conditions, achieving optimal performance at neutral pH. A combination of size exclusion, affinity-based bonding, and charge-based interactions was followed to attain superior rejection rates. The simultaneous removal of multiple pollutants from the aqueous system demonstrates the superior versatility and efficiency of the fabricated membranes in handling complex multi-component contaminations. The treated water resulting from this work adheres to the WHO's standards for safe water. Additionally, antifouling studies showed a flux recovery ratio of >95% after multiple cycles.
- 4 August 2025
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 8 (16) , 11910-11924
2D–3D-Structured Mixed-Metal Cobalt–Vanadium–Selenide (Co–V–Se) System: A Transformative Electrode Material for Supercapacitors
- 4 August 2025
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 8 (16) , 11910-11924
2D–3D-Structured Mixed-Metal Cobalt–Vanadium–Selenide (Co–V–Se) System: A Transformative Electrode Material for Supercapacitors