VMVed Prakash Maurya

Ved Prakash Maurya

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Ved Prakash Maurya has a total of 64 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Lithospheric structure of central Brazil revealed by combined 3-D electromagnetic and seismic tomography: relationship to intraplate magmatism and seismicity

    by Ved P Maurya, Max A Meju, Carlos Alberto M Chaves, Sergio L Fontes, Antonio L Padilha, Artur S Benevides, Lais N Rodrigues, Emanuele F La Terra

    SUMMARY: The origins of the diverse Mesozoic magmatism and present-day intraplate seismicity in central Brazil, part of the South American plate currently undergoing compression/shortening, have been the subjects of long-standing debate. Here, we investigate the structure of the lithosphere using a combined 3-D electrical resistivity and seismic P-wave velocity (Vp) tomography to understand the deformation patterns and the relationship to the distribution of magmatism and seismicity in the region. Magnetotelluric and geomagnetic depth sounding data and P-wave traveltimes from seismological arrays were inverted for the 3-D resistivity and Vp variations in the ∼1500 × 1000 km2 area of study. The results reveal a basic structure consisting of an electrically resistive and seismically fast upper crust, a low-resistivity and low wave speed lower crust, a resistive and fast uppermost mantle and a basal low-resistivity and low wave speed asthenosphere. This layering is thinned in places and dissected by steep cross-cutting NE-SW and NW-SE shear zones of low resistivity and slow wave speeds yielding a fragmented lithosphere. Thick blocks of high resistivity and fast wave speed bounded by the steep shear zones correlate spatially with zones of gravity lows across the Neoproterozoic fold belts. The steep shear zones correlate with the Middle Proterozoic and Mesozoic mafic dyke swarms (likely emplaced during the opening of Neoproterozoic and younger proto-Atlantic oceans) and Cretaceous-Eocene alkaline and alkaline-carbonatite magmatism, indicating that inherited structures controlled the lithospheric deformation and magmatism. They also correlate spatially with zones of high seismicity, suggesting that fluid migration plays a role in generating the ongoing seismicity.

  • Open Access

    Lithospheric structure of central Brazil revealed by combined three-dimensional electromagnetic and seismic tomography: Relationship to the distribution of magmatism and intra-plate seismicity

    by Ved Prakash Maurya, Maxwell Azuka Meju, Carlos Alberto Moreno Chaves, Sergio Luiz Fontes, Antonio Lopes Padilha, Artur Santos Benevides, Lais Nathalia Rodrigues, Emanuele F La Terra

    The origin of intraplate seismicity and Cretaceous-Eocene alkaline magmatism in central Brazil has been the subject of long-standing debate. Here, we investigate the structure of lithosphere using a combined three-dimensional (3D) electrical resistivity and seismic P-wave velocity (Vp) tomography in order to understand the deformation patterns and relationship to the distribution of magmatism and seismicity in the region. Magnetotelluric and geomagnetic depth sounding data and P-wave travel times from seismological arrays were inverted for 3D resistivity and Vp variations in the ~1500×1000 km2 area of study. The results reveal a strong correlation between electrical resistivity and seismic velocity anomalies in the lithosphere and upper asthenosphere. The basic structure consists of an electrically resistive and seismically fast upper crust, a low-resistivity and low-wavespeed lower crust, a resistive and fast uppermost mantle and a basal low-resistivity and low-wavespeed asthenosphere. This layering is dissected by through-going steep NE-SW and NW-SE shear-zones (or alteration haloes) of low resistivity and slow wavespeeds yielding a completely fragmented lithosphere. There is a strong correlation between these steep shear-zones and zones of gravity lows, past magmatism and present-day seismicity in the region. These anomalous steep zones likely tapped sub-lithospheric sources of magma and assisted the movement of lithospheric blocks in the ensuing compressional deformation (and basin inversion). Given the occurrence of mafic and alkaline rocks, basin inversion and through-going shear zones (to facilitate deep fluid migration), we suggest that this region may be important for future exploration for geothermal and natural hydrogen resources needed for a low-carbon future.

  • Airborne electromagnetic imaging of canal‐induced recharge on groundwater quality improvement in saline‐ affected alluvial region of NW India

    by Payal Rani, Akhil Mishra, Ved P. Maurya, Subash Chandra, Joy Choudhury, K. Lohith Kumar, N. Srinivas Rao, K. P. Singh, Sahebrao Sonkamble, E. Nagaiah, et al.

    Canals have been important structure for transporting water from one place to another for irrigation purposes across the globe. In the present scenario of increasing water scarcity, the significance of canals has increased manifold. Canals also suffer water leakages, which in turn contributes to the groundwater recharge. Thus, there is a strong need to study how the long‐term canal flow impacts groundwater recharge and improves its quality, especially in saline environments. The paper presents a detailed analysis of airborne electromagnetics (AEM) data acquired from a highly saline groundwater zone in the semi‐arid region of northwest India, where most of the irrigation has been met from the canal network for the past several decades. The study focuses on using AEM data, supported by borewell lithology and borehole electrical logs, to analyse the subsurface recharge induced by the canals and its impact on groundwater quality. Over the dense and sparse canal networks, AEM has identified different resistivity signatures. It shows high resistivity over the dunes and low resistivity in the clay‐dominated areas. A crescent‐shaped, 20–100 m thick zone with moderate to high resistivity has been observed below the canals within the low resistivity background, which indicates seepage and discharge from the canal. Moreover, changes in water quality (1994–2019) from borewells near the canal recharge zones show significant improvement in the groundwater quality, evidenced by a lowering of the electrical conductivity of groundwater. This recharge affects approximately 20% of the total study area. The total volume of canal‐induced recharge inferred from AEM resistivity is estimated to be ∼12,000 to ∼18,000 MCM.


  • Unravelling heterogeneities in the coastal basaltic aquifer in Saurashtra, India by airborne electromagnetics

    by Ved P. Maurya, Akhil Mishra, Subash Chandra, Payal Rani, P. Akhil, Joy Choudhury, K. Lohith Kumar, N. Srinivas Rao, Sahebrao Sonkamble, E. Nagaiah, et al.

    Summary: The Deccan flood basalt in Saurashtra, India, primarily comprises multiple lava flows with a few interbedded sediments in hiatus, underlain by Mesozoic formations. Unlike conventional seismic methods, airborne electromagnetics (AEM) offer the possibility of reliably mapping heterogeneities within basalts and sedimentary strata due to the large variabilities of electrical properties. The dual‐moment heliborne transient electromagnetics data were collected over ∼32,000 sq. km of the Saurashtra region, comprising coastal sediments, basaltic heterogeneities and sedimentary formations. With limited calibration and validation from borewells, AEM modelling results demarcate some electrical heterogeneities, explaining the highly resistive (>100 Ωm) massive basalts, resistive (50–100 Ωm) fractured, amygdaloidal basalts, moderately resistive‐to‐conductive (10–50 Ωm) weathered and fractured basalts/sandstone and shale formations, conductive (3–10 Ωm) limestone and clay and highly conductive (<3 Ωm) saline‐enriched coastal and glacial sediments. The weathered and/or fractured amygdaloidal basalts, dykes and sandstone formations provide the fresh aquifer settings with moderate‐ to high yield. Shallow aquifers (100 m). The results suggest that the east–west aligned water divide for surface flow rivers and/or drainages directly associated with resistive basaltic uplands controls the subsurface conditions for groundwater flow and/or accumulation. This study provides a new dimension of less‐studied coastal basaltic aquifers and the influence of the extent of saline zones/saltwater ingress in them and recommended for limited groundwater extraction and prior assessment of recharge potential for long‐term aquifer sustainability, especially in arid and semi‐arid regions like Saurashtra.

  • Deep Structure of the Santos Basin, Offshore Brazil From 3D Inversion of magnetotelluric Data

    by A. S. Benevides, M. A. Meju, S. L. Fontes, V. P. Maurya, N. M. Meqbel, P. L. Ribeiro, E. F. La Terra

    The relationship between deep crustal structure and the deformation in the overlying sedimentary wedge in Santos basin, Brazil is not well understood, and the origin and evolution of the salt‐related “Albian Gap (AG)” remain a topic of debate. We investigate the deep structure using three‐dimensional inversion of full tensor marine magnetotelluric (MT) data (of 10−1 to 104 s period bandwidth) from 92 stations along three NW–SE lines in 50–1,700 m water depth, one crossing the Cretaceous hinge line (CHL), AG, and Cabo Frio Fault (CFF). The geological validity of the resulting MT resistivity models was determined using resistivity logs from 11 wells and seismic data. The model shows two regionally persistent electrically conductive layers (C2 and C3) related to key Cenozoic and Cretaceous unconformities in the upper part of the sedimentary wedge. Beneath this wedge, the resistive continental crust is ∼35 km thick across the CHL until the 200 m isobath and thereafter thins rapidly seaward to ∼21 km over a lateral distance of ∼80 km defining a domain of highly extended and faulted crust. Our models show a mantle‐associated basement high and evidence of significant uplift of the lower part of the sedimentary wedge at 100–150 km distance along our central profile which spatially coincides with the AG and a previously proposed Moho high. This implies a mantle‐driven deformation of the crust and basin fill. We propose that mantle flow and magmatism may have played a significant role in the inferred displacement at the AG.


  • Open Access

    Three-dimensional electric-field vector resistivity imaging for deep subsurface fractures network in heterogeneous crystalline rocks

    by V P Maurya, S M Gupta, A Mishra, S Chandra, V M Tiwari

    SUMMARY: Crystalline rocks, exposed in different parts of the world and over about one-third of India, have complex aquifer systems, which pose a challenge to mapping groundwater dynamics. Electrical resistivity tomography in quasi-3-D and electrical logging of some borewells carried out in an experimental ‘hydrogeological park’ in southern India, which has numerous boreholes and other geophysical information for validation, were unable to map the existence of deeper bedrock fractures and their connectivity. We have attempted electric-field vector resistivity imaging (EVRI), a new tool, to resolve the possible fracture-induced deep interconnectivity in a hard rock aquifer system. In the experiment, multiple two-orthonormal-channels independent receiver nodes for potential measurements are deployed and illuminated with several current injections between ∼ 0.9–3.7 A in full 3-D fashion, which allowed for improved mapping of resistivity variation than earlier approaches. The EVRI-derived full 3-D model shows the presence of fractures for depths between 20 and 70 m with substantial resistivity variations, supported by some borewells hydraulic investigations. It has also enhanced lateral resolution for depths > 30 m and almost doubled the depth of investigation than earlier electrical models. EVRI results revealed unweathered/unfractured granitic rock with no significant signature of fractures beyond 70 m depth that corroborates with existing borehole logs and hydrogeological conceptual model. Therefore, this study demonstrates the potential of EVRI for 3-D mapping of heterogeneous crystalline rocks, which would greatly help in groundwater management.


  • Electrically inferred subsurface fractures in the crystalline hard rocks of an Experimental Hydrogeological Park, Southern India

    by Ved Prakash Maurya, Subash Chandra, Sahebrao Sonkamble, Kethavath Lohithkumar, Erugu Nagaiah, Adrien Selles

    We have investigated a network of fractures forming the flow paths within the crystalline granitic rocks of an Experimental Hydrogeological Park (EHP) with the help of electrical resistivity surveys. The experimental study located at the managed aquifer recharge (MAR) site of EHP has measured a distinct variation in the apparent resistivity for deeper electrical signals that localize the presence of interconnected water-saturated fractures. Usually, profiles close to the MAR tank depict low apparent resistivity values from deep signals across in situ fractures and resistivity amplitude increases away from the tank. We modeled and simulated the presence of water-saturated fractures by a simple three-layered model having embedded shallow heterogeneities in the saprolite layer, vertically interconnected multiple thin conductive horizontal layers in the fissured zone, and an underlain unweathered crystalline granitic basement. These fractures produce a distinct variation in the resistivity for modeling and inversion exercises. The decadal time-lapse electrical resistivity surveys, after the establishment of the MAR tank, mark similar repetitive main features with a distinct drop in resistivity depicting the presence of water-saturated fractures. An overview of the 3D resistivity model characterizes the subsurface heterogeneities and the presence of possible flow paths for shallow depths 30 m.


  • Gradient based first- and second-order filters for the demarcation of continental–oceanic boundaries using satellite gravity data

    by Ved P Maurya, Sergio L Fontes, Vanderlei C Oliveira Jr, Emanuele F La Terra

    SUMMARY: Demarcating the continental–oceanic boundary (COB) is extremely important as it contributes to an understanding of the tectonic environments of marginal basins through plate reconstructions. In general, the COB is estimated by jointly interpreting the features of the basement geomorphology, bathymetry and geophysical datasets, including gravity, magnetic, seismic and geochemical data. We propose a novel methodology named the tilt-theta angles correlation (TTAC), a second-order filtering approach to estimate the COB using high-resolution satellite gravity data. This method computes the angular difference or correlation angle between the vectors computed from the gradients of the tilt and theta derivative-based first-order filters. Oceanic regions generally exhibit small correlation angles (∼0°), thereby indicating a direct correlation; in contrast, continental regions depict large correlation angles (∼180°) and thus display an inverse correlation. The TTAC method marks the COB at the spatial position where the correlation angles abruptly shift from inverse to direct. Tests using synthetic data and the larger spectral energy content of TTAC for long wavelengths over tilt, theta and minus of the sign of vertical derivative (-SiVD) filters attest the effectiveness of the new methodology over first-order derivative based filters. Additionally, tests utilizing real data over both the West African Transform Margin (WATM) and across the South Atlantic Conjugate Margin (SACM) provide favourable results compared with the previous methodologies used to demarcate the COB. The COB estimates derived using the new methodology are consistent with the COB estimates obtained during recent plate-reconstruction studies. We also compare our results with an earlier interpretation along a conjugate margin encompassing magma-poor and magma-rich regions. In the complex rifted environments of the SACM, in which volcanic rocks are dominant, the TTAC methodology substantially improves the previous COB estimates, thereby establishing it as an efficient edge marker by simultaneously reducing small-scale geological noise and enhancing regional-scale geological contributions.