Ning Jiang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Ning Jiang has a total of 178 co-authors. Here are the top co-authors by number of shared publications:
- Dongyan Zhao
Breeding Insight, University of Florida, Institute of Food and Agricultural Sciences , PO Box 110695, Gainesville, FL 32611
7 shared publications - Shujun Ou
Department of Molecular Genetics, Ohio State University, Columbus, USA
7 shared publications Ann A. Ferguson
Department of Horticulture, Michigan State University, 1066 Bogue Street, East Lansing, MI 48824, USA
5 shared publications- Carol Robin Buell
Center for Applied Genetic Technologies, University of Georgia
3 shared publications - Damon Lisch
Department of Botany and Plant Pathology, Purdue University, West Lafayette, Indiana, USA
3 shared publications Jiming Jiang
Department of Horticulture, Michigan State University, East Lansing, MI 48824, USA
3 shared publications
Latest Publications
- Open Access
- 7 July 2026
- Published by Springer Nature in Nature Communications
Rapid GC content evolution in rice through GC-biased gene conversion and selection for translation efficiency.
GC-biased gene conversion (gBGC), which favors GC over AT alleles during recombination, is responsible for the elevation of GC content in yeast and animals and is more effective in outcrossing species, yet its role in plants is less well understood. Here, we report empirical evidence for the presence of gBGC in rice (Oryza sativa). While the GC content of noncoding sequences is well correlated with the recombination frequency, the GC content of coding regions is shaped by both recombination and selection for GC-rich codons, which is linked to high translation efficiency. Surprisingly, GC content has declined in both rice and its partially outcrossing wild progenitor, and there is no evidence that full outcrossing results in a net increase of GC content. This suggests that the mutations are more robust than gBGC in altering GC content, implying that GC content will continue to decline in rice and its close relatives.
- 7 July 2026
- Published by Springer Nature in Nature Communications
Open AccessRapid GC content evolution in rice through GC-biased gene conversion and selection for translation efficiency.
GC-biased gene conversion (gBGC), which favors GC over AT alleles during recombination, is responsible for the elevation of GC content in yeast and animals and is more effective in outcrossing species, yet its role in plants is less well understood. Here, we report empirical evidence for the presence of gBGC in rice (Oryza sativa). While the GC content of noncoding sequences is well correlated with the recombination frequency, the GC content of coding regions is shaped by both recombination and selection for GC-rich codons, which is linked to high translation efficiency. Surprisingly, GC content has declined in both rice and its partially outcrossing wild progenitor, and there is no evidence that full outcrossing results in a net increase of GC content. This suggests that the mutations are more robust than gBGC in altering GC content, implying that GC content will continue to decline in rice and its close relatives.
- Open Access
- 23 April 2024
- Published by Oxford University Press (OUP) in Plant Physiology
- Vol. 195 (4) , 2787-2798
Celine, a long interspersed nuclear element retrotransposon, colonizes in the centromeres of poplar chromosomes
Centromeres in most multicellular eukaryotes are composed of long arrays of repetitive DNA sequences. Interestingly, several transposable elements, including the well-known long terminal repeat centromeric retrotransposon of maize (CRM), were found to be enriched in functional centromeres marked by the centromeric histone H3 (CENH3). Here, we report a centromeric long interspersed nuclear element (LINE), Celine, in Populus species. Celine has colonized preferentially in the CENH3-associated chromatin of every poplar chromosome, with 84% of the Celine elements localized in the CENH3-binding domains. In contrast, only 51% of the CRM elements were bound to CENH3 domains in Populus trichocarpa. These results suggest different centromere targeting mechanisms employed by Celine and CRM elements. Nevertheless, the high target specificity seems to be detrimental to further amplification of the Celine elements, leading to a shorter life span and patchy distribution among plant species compared with the CRM elements. Using a phylogenetically guided approach, we were able to identify Celine-like LINE elements in tea plant (Camellia sinensis) and green ash tree (Fraxinus pennsylvanica). The centromeric localization of these Celine-like LINEs was confirmed in both species. We demonstrate that the centromere targeting property of Celine-like LINEs is of primitive origin and has been conserved among distantly related plant species.
- 23 April 2024
- Published by Oxford University Press (OUP) in Plant Physiology
- Vol. 195 (4) , 2787-2798
Open AccessCeline, a long interspersed nuclear element retrotransposon, colonizes in the centromeres of poplar chromosomes
Centromeres in most multicellular eukaryotes are composed of long arrays of repetitive DNA sequences. Interestingly, several transposable elements, including the well-known long terminal repeat centromeric retrotransposon of maize (CRM), were found to be enriched in functional centromeres marked by the centromeric histone H3 (CENH3). Here, we report a centromeric long interspersed nuclear element (LINE), Celine, in Populus species. Celine has colonized preferentially in the CENH3-associated chromatin of every poplar chromosome, with 84% of the Celine elements localized in the CENH3-binding domains. In contrast, only 51% of the CRM elements were bound to CENH3 domains in Populus trichocarpa. These results suggest different centromere targeting mechanisms employed by Celine and CRM elements. Nevertheless, the high target specificity seems to be detrimental to further amplification of the Celine elements, leading to a shorter life span and patchy distribution among plant species compared with the CRM elements. Using a phylogenetically guided approach, we were able to identify Celine-like LINE elements in tea plant (Camellia sinensis) and green ash tree (Fraxinus pennsylvanica). The centromeric localization of these Celine-like LINEs was confirmed in both species. We demonstrate that the centromere targeting property of Celine-like LINEs is of primitive origin and has been conserved among distantly related plant species.
- Open Access
- 26 August 2022
- Published by Wiley in The Plant Journal
- Vol. 112 (1) , 172-192
Distinct composition and amplification dynamics of transposable elements in sacred lotus (Nelumbo nucifera Gaertn.)
SUMMARY: Sacred lotus (Nelumbo nucifera Gaertn.) is a basal eudicot plant with a unique lifestyle, physiological features, and evolutionary characteristics. Here we report the unique profile of transposable elements (TEs) in the genome, using a manually curated repeat library. TEs account for 59% of the genome, and hAT (Ac/Ds) elements alone represent 8%, more than in any other known plant genome. About 18% of the lotus genome is comprised of Copia LTR retrotransposons, and over 25% of them are associated with non‐canonical termini (non‐TGCA). Such high abundance of non‐canonical LTR retrotransposons has not been reported for any other organism. TEs are very abundant in genic regions, with retrotransposons enriched in introns and DNA transposons primarily in flanking regions of genes. The recent insertion of TEs in introns has led to significant intron size expansion, with a total of 200 Mb in the 28 455 genes. This is accompanied by declining TE activity in intergenic regions, suggesting distinct control efficacy of TE amplification in different genomic compartments. Despite the prevalence of TEs in genic regions, some genes are associated with fewer TEs, such as those involved in fruit ripening and stress responses. Other genes are enriched with TEs, and genes in epigenetic pathways are the most associated with TEs in introns, indicating a dynamic interaction between TEs and the host surveillance machinery. The dramatic differential abundance of TEs with genes involved in different biological processes as well as the variation of target preference of different TEs suggests the composition and activity of TEs influence the path of evolution.
- 26 August 2022
- Published by Wiley in The Plant Journal
- Vol. 112 (1) , 172-192
Open AccessDistinct composition and amplification dynamics of transposable elements in sacred lotus (Nelumbo nucifera Gaertn.)
SUMMARY: Sacred lotus (Nelumbo nucifera Gaertn.) is a basal eudicot plant with a unique lifestyle, physiological features, and evolutionary characteristics. Here we report the unique profile of transposable elements (TEs) in the genome, using a manually curated repeat library. TEs account for 59% of the genome, and hAT (Ac/Ds) elements alone represent 8%, more than in any other known plant genome. About 18% of the lotus genome is comprised of Copia LTR retrotransposons, and over 25% of them are associated with non‐canonical termini (non‐TGCA). Such high abundance of non‐canonical LTR retrotransposons has not been reported for any other organism. TEs are very abundant in genic regions, with retrotransposons enriched in introns and DNA transposons primarily in flanking regions of genes. The recent insertion of TEs in introns has led to significant intron size expansion, with a total of 200 Mb in the 28 455 genes. This is accompanied by declining TE activity in intergenic regions, suggesting distinct control efficacy of TE amplification in different genomic compartments. Despite the prevalence of TEs in genic regions, some genes are associated with fewer TEs, such as those involved in fruit ripening and stress responses. Other genes are enriched with TEs, and genes in epigenetic pathways are the most associated with TEs in introns, indicating a dynamic interaction between TEs and the host surveillance machinery. The dramatic differential abundance of TEs with genes involved in different biological processes as well as the variation of target preference of different TEs suggests the composition and activity of TEs influence the path of evolution.
- Open Access
- 17 August 2022
- Published by Oxford University Press (OUP) in G3: Genes, Genomes, Genetics
- Vol. 12 (10)
Chromosome-scale genome assemblies and annotations for Poales species Carex cristatella, Carex scoparia, Juncus effusus, and Juncus inflexus
The majority of sequenced genomes in the monocots are from species belonging to Poaceae, which include many commercially important crops. Here, we expand the number of sequenced genomes from the monocots to include the genomes of 4 related cyperids: Carex cristatella and Carex scoparia from Cyperaceae and Juncus effusus and Juncus inflexus from Juncaceae. The high-quality, chromosome-scale genome sequences from these 4 cyperids were assembled by combining whole-genome shotgun sequencing of Nanopore long reads, Illumina short reads, and Hi-C sequencing data. Some members of the Cyperaceae and Juncaceae are known to possess holocentric chromosomes. We examined the repeat landscapes in our sequenced genomes to search for potential repeats associated with centromeres. Several large satellite repeat families, comprising 3.2–9.5% of our sequenced genomes, showed dispersed distribution of large satellite repeat clusters across all Carex chromosomes, with few instances of these repeats clustering in the same chromosomal regions. In contrast, most large Juncus satellite repeats were clustered in a single location on each chromosome, with sporadic instances of large satellite repeats throughout the Juncus genomes. Recognizable transposable elements account for about 20% of each of the 4 genome assemblies, with the Carex genomes containing more DNA transposons than retrotransposons while the converse is true for the Juncus genomes. These genome sequences and annotations will facilitate better comparative analysis within monocots.
- 17 August 2022
- Published by Oxford University Press (OUP) in G3: Genes, Genomes, Genetics
- Vol. 12 (10)
Open AccessChromosome-scale genome assemblies and annotations for Poales species Carex cristatella, Carex scoparia, Juncus effusus, and Juncus inflexus
The majority of sequenced genomes in the monocots are from species belonging to Poaceae, which include many commercially important crops. Here, we expand the number of sequenced genomes from the monocots to include the genomes of 4 related cyperids: Carex cristatella and Carex scoparia from Cyperaceae and Juncus effusus and Juncus inflexus from Juncaceae. The high-quality, chromosome-scale genome sequences from these 4 cyperids were assembled by combining whole-genome shotgun sequencing of Nanopore long reads, Illumina short reads, and Hi-C sequencing data. Some members of the Cyperaceae and Juncaceae are known to possess holocentric chromosomes. We examined the repeat landscapes in our sequenced genomes to search for potential repeats associated with centromeres. Several large satellite repeat families, comprising 3.2–9.5% of our sequenced genomes, showed dispersed distribution of large satellite repeat clusters across all Carex chromosomes, with few instances of these repeats clustering in the same chromosomal regions. In contrast, most large Juncus satellite repeats were clustered in a single location on each chromosome, with sporadic instances of large satellite repeats throughout the Juncus genomes. Recognizable transposable elements account for about 20% of each of the 4 genome assemblies, with the Carex genomes containing more DNA transposons than retrotransposons while the converse is true for the Juncus genomes. These genome sequences and annotations will facilitate better comparative analysis within monocots.
- Open Access
- 8 March 2022
- Published by Springer Nature in Genome Biology
- Vol. 23 (1) , 1
Author Correction: Benchmarking transposable element annotation methods for creation of a streamlined, comprehensive pipeline
- 8 March 2022
- Published by Springer Nature in Genome Biology
- Vol. 23 (1) , 1
Open AccessAuthor Correction: Benchmarking transposable element annotation methods for creation of a streamlined, comprehensive pipeline
- Open Access
- 18 November 2021
- Published by Oxford University Press (OUP) in Plant Physiology
- Vol. 188 (2) , 955-970
AnnoSINE: a short interspersed nuclear elements annotation tool for plant genomes
Short interspersed nuclear elements (SINEs) are a widespread type of small transposable element (TE). With increasing evidence for their impact on gene function and genome evolution in plants, accurate genome-scale SINE annotation becomes a fundamental step for studying the regulatory roles of SINEs and their relationship with other components in the genomes. Despite the overall promising progress made in TE annotation, SINE annotation remains a major challenge. Unlike some other TEs, SINEs are short and heterogeneous, and they usually lack well-conserved sequence or structural features. Thus, current SINE annotation tools have either low sensitivity or high false discovery rates. Given the demand and challenges, we aimed to provide a more accurate and efficient SINE annotation tool for plant genomes. The pipeline starts with maximizing the pool of SINE candidates via profile hidden Markov model-based homology search and de novo SINE search using structural features. Then, it excludes the false positives by integrating all known features of SINEs and the features of other types of TEs that can often be misannotated as SINEs. As a result, the pipeline substantially improves the tradeoff between sensitivity and accuracy, with both values close to or over 90%. We tested our tool in Arabidopsis thaliana and rice (Oryza sativa), and the results show that our tool competes favorably against existing SINE annotation tools. The simplicity and effectiveness of this tool would potentially be useful for generating more accurate SINE annotations for other plant species. The pipeline is freely available at https://github.com/yangli557/AnnoSINE.
- 18 November 2021
- Published by Oxford University Press (OUP) in Plant Physiology
- Vol. 188 (2) , 955-970
Open AccessAnnoSINE: a short interspersed nuclear elements annotation tool for plant genomes
Short interspersed nuclear elements (SINEs) are a widespread type of small transposable element (TE). With increasing evidence for their impact on gene function and genome evolution in plants, accurate genome-scale SINE annotation becomes a fundamental step for studying the regulatory roles of SINEs and their relationship with other components in the genomes. Despite the overall promising progress made in TE annotation, SINE annotation remains a major challenge. Unlike some other TEs, SINEs are short and heterogeneous, and they usually lack well-conserved sequence or structural features. Thus, current SINE annotation tools have either low sensitivity or high false discovery rates. Given the demand and challenges, we aimed to provide a more accurate and efficient SINE annotation tool for plant genomes. The pipeline starts with maximizing the pool of SINE candidates via profile hidden Markov model-based homology search and de novo SINE search using structural features. Then, it excludes the false positives by integrating all known features of SINEs and the features of other types of TEs that can often be misannotated as SINEs. As a result, the pipeline substantially improves the tradeoff between sensitivity and accuracy, with both values close to or over 90%. We tested our tool in Arabidopsis thaliana and rice (Oryza sativa), and the results show that our tool competes favorably against existing SINE annotation tools. The simplicity and effectiveness of this tool would potentially be useful for generating more accurate SINE annotations for other plant species. The pipeline is freely available at https://github.com/yangli557/AnnoSINE.
- Top Cited PapersOpen Access
- 16 December 2019
- Published by Springer Nature in Genome Biology
- Vol. 20 (1) , 1-18
Benchmarking transposable element annotation methods for creation of a streamlined, comprehensive pipeline
Background: Sequencing technology and assembly algorithms have matured to the point that high-quality de novo assembly is possible for large, repetitive genomes. Current assemblies traverse transposable elements (TEs) and provide an opportunity for comprehensive annotation of TEs. Numerous methods exist for annotation of each class of TEs, but their relative performances have not been systematically compared. Moreover, a comprehensive pipeline is needed to produce a non-redundant library of TEs for species lacking this resource to generate whole-genome TE annotations. Results: We benchmark existing programs based on a carefully curated library of rice TEs. We evaluate the performance of methods annotating long terminal repeat (LTR) retrotransposons, terminal inverted repeat (TIR) transposons, short TIR transposons known as miniature inverted transposable elements (MITEs), and Helitrons. Performance metrics include sensitivity, specificity, accuracy, precision, FDR, and F1. Using the most robust programs, we create a comprehensive pipeline called Extensive de-novo TE Annotator (EDTA) that produces a filtered non-redundant TE library for annotation of structurally intact and fragmented elements. EDTA also deconvolutes nested TE insertions frequently found in highly repetitive genomic regions. Using other model species with curated TE libraries (maize and Drosophila), EDTA is shown to be robust across both plant and animal species. Conclusions: The benchmarking results and pipeline developed here will greatly facilitate TE annotation in eukaryotic genomes. These annotations will promote a much more in-depth understanding of the diversity and evolution of TEs at both intra- and inter-species levels. EDTA is open-source and freely available: https://github.com/oushujun/EDTA.
- 16 December 2019
- Published by Springer Nature in Genome Biology
- Vol. 20 (1) , 1-18
Top Cited PapersOpen AccessBenchmarking transposable element annotation methods for creation of a streamlined, comprehensive pipeline
Background: Sequencing technology and assembly algorithms have matured to the point that high-quality de novo assembly is possible for large, repetitive genomes. Current assemblies traverse transposable elements (TEs) and provide an opportunity for comprehensive annotation of TEs. Numerous methods exist for annotation of each class of TEs, but their relative performances have not been systematically compared. Moreover, a comprehensive pipeline is needed to produce a non-redundant library of TEs for species lacking this resource to generate whole-genome TE annotations. Results: We benchmark existing programs based on a carefully curated library of rice TEs. We evaluate the performance of methods annotating long terminal repeat (LTR) retrotransposons, terminal inverted repeat (TIR) transposons, short TIR transposons known as miniature inverted transposable elements (MITEs), and Helitrons. Performance metrics include sensitivity, specificity, accuracy, precision, FDR, and F1. Using the most robust programs, we create a comprehensive pipeline called Extensive de-novo TE Annotator (EDTA) that produces a filtered non-redundant TE library for annotation of structurally intact and fragmented elements. EDTA also deconvolutes nested TE insertions frequently found in highly repetitive genomic regions. Using other model species with curated TE libraries (maize and Drosophila), EDTA is shown to be robust across both plant and animal species. Conclusions: The benchmarking results and pipeline developed here will greatly facilitate TE annotation in eukaryotic genomes. These annotations will promote a much more in-depth understanding of the diversity and evolution of TEs at both intra- and inter-species levels. EDTA is open-source and freely available: https://github.com/oushujun/EDTA.
- Open Access
- 12 December 2019
- Published by Springer Nature in Mobile DNA
- Vol. 10 (1) , 1-3
LTR_FINDER_parallel: parallelization of LTR_FINDER enabling rapid identification of long terminal repeat retrotransposons
Annotation of plant genomes is still a challenging task due to the abundance of repetitive sequences, especially long terminal repeat (LTR) retrotransposons. LTR_FINDER is a widely used program for the identification of LTR retrotransposons but its application on large genomes is hindered by its single-threaded processes. Here we report an accessory program that allows parallel operation of LTR_FINDER, resulting in up to 8500X faster identification of LTR elements. It takes only 72 min to process the 14.5 Gb bread wheat (Triticum aestivum) genome in comparison to 1.16 years required by the original sequential version. LTR_FINDER_parallel is freely available at https://github.com/oushujun/LTR_FINDER_parallel.
- 12 December 2019
- Published by Springer Nature in Mobile DNA
- Vol. 10 (1) , 1-3
Open AccessLTR_FINDER_parallel: parallelization of LTR_FINDER enabling rapid identification of long terminal repeat retrotransposons
Annotation of plant genomes is still a challenging task due to the abundance of repetitive sequences, especially long terminal repeat (LTR) retrotransposons. LTR_FINDER is a widely used program for the identification of LTR retrotransposons but its application on large genomes is hindered by its single-threaded processes. Here we report an accessory program that allows parallel operation of LTR_FINDER, resulting in up to 8500X faster identification of LTR elements. It takes only 72 min to process the 14.5 Gb bread wheat (Triticum aestivum) genome in comparison to 1.16 years required by the original sequential version. LTR_FINDER_parallel is freely available at https://github.com/oushujun/LTR_FINDER_parallel.
- Open Access
- 1 November 2019
- Published by Oxford University Press (OUP) in Genome Biology and Evolution
- Vol. 11 (11) , 3181-3193
GingerRoot: A Novel DNA Transposon Encoding Integrase-Related Transposase in Plants and Animals
Transposable elements represent the largest components of many eukaryotic genomes and different genomes harbor different combinations of elements. Here, we discovered a novel DNA transposon in the genome of the clubmoss Selaginella lepidophylla. Further searching for related sequences to the conserved DDE region uncovered the presence of this superfamily of elements in fish, coral, sea anemone, and other animal species. However, this element appears restricted to Bryophytes and Lycophytes in plants. This transposon, named GingerRoot, is associated with a 6 bp (base pair) target site duplication, and 100–150 bp terminal inverted repeats. Analysis of transposase sequences identified the DDE motif, a catalytic domain, which shows similarity to the integrase of Gypsy-like long terminal repeat retrotransposons, the most abundant component in plant genomes. A total of 77 intact and several hundred truncated copies of GingerRoot elements were identified in S. lepidophylla. Like Gypsy retrotransposons, GingerRoots show a lack of insertion preference near genes, which contrasts to the compact genome size of about 100 Mb. Nevertheless, a considerable portion of GingerRoot elements was found to carry gene fragments, suggesting the capacity of duplicating gene sequences is unlikely attributed to the proximity to genes. Elements carrying gene fragments appear to be less methylated, more diverged, and more distal to genes than those without gene fragments, indicating they are preferentially retained in gene-poor regions. This study has identified a broadly dispersed, novel DNA transposon, and the first plant DNA transposon with an integrase-related transposase, suggesting the possibility of de novo formation of Gypsy-like elements in plants.
- 1 November 2019
- Published by Oxford University Press (OUP) in Genome Biology and Evolution
- Vol. 11 (11) , 3181-3193
Open AccessGingerRoot: A Novel DNA Transposon Encoding Integrase-Related Transposase in Plants and Animals
Transposable elements represent the largest components of many eukaryotic genomes and different genomes harbor different combinations of elements. Here, we discovered a novel DNA transposon in the genome of the clubmoss Selaginella lepidophylla. Further searching for related sequences to the conserved DDE region uncovered the presence of this superfamily of elements in fish, coral, sea anemone, and other animal species. However, this element appears restricted to Bryophytes and Lycophytes in plants. This transposon, named GingerRoot, is associated with a 6 bp (base pair) target site duplication, and 100–150 bp terminal inverted repeats. Analysis of transposase sequences identified the DDE motif, a catalytic domain, which shows similarity to the integrase of Gypsy-like long terminal repeat retrotransposons, the most abundant component in plant genomes. A total of 77 intact and several hundred truncated copies of GingerRoot elements were identified in S. lepidophylla. Like Gypsy retrotransposons, GingerRoots show a lack of insertion preference near genes, which contrasts to the compact genome size of about 100 Mb. Nevertheless, a considerable portion of GingerRoot elements was found to carry gene fragments, suggesting the capacity of duplicating gene sequences is unlikely attributed to the proximity to genes. Elements carrying gene fragments appear to be less methylated, more diverged, and more distal to genes than those without gene fragments, indicating they are preferentially retained in gene-poor regions. This study has identified a broadly dispersed, novel DNA transposon, and the first plant DNA transposon with an integrase-related transposase, suggesting the possibility of de novo formation of Gypsy-like elements in plants.
- Open Access
LTR_FINDER_parallel: parallelization of LTR_FINDER enabling rapid identification of long terminal repeat retrotransposons
Summary: Annotation of plant genomes is still a challenging task due to the abundance of repetitive sequences, especially long terminal repeat (LTR) retrotransposons. LTR_FINDER is a widely used program for identification of LTR retrotransposons but its application on large genomes is hindered by its single threaded processes. Here we report an accessory program that allows parallel operation of LTR_FINDER, resulting up to 8,500X faster identification of LTR elements. It takes only 72 minutes to process the 14.5 Gb bread wheat ( Triticum aestivum ) genome in comparison to 1.16 years required by the original sequential version. Availability: LTR_FINDER_parallel is freely available at https://github.com/oushujun/LTR_FINDER_parallel . Contact: jiangn@msu.edu
Open AccessLTR_FINDER_parallel: parallelization of LTR_FINDER enabling rapid identification of long terminal repeat retrotransposons
Summary: Annotation of plant genomes is still a challenging task due to the abundance of repetitive sequences, especially long terminal repeat (LTR) retrotransposons. LTR_FINDER is a widely used program for identification of LTR retrotransposons but its application on large genomes is hindered by its single threaded processes. Here we report an accessory program that allows parallel operation of LTR_FINDER, resulting up to 8,500X faster identification of LTR elements. It takes only 72 minutes to process the 14.5 Gb bread wheat ( Triticum aestivum ) genome in comparison to 1.16 years required by the original sequential version. Availability: LTR_FINDER_parallel is freely available at https://github.com/oushujun/LTR_FINDER_parallel . Contact: jiangn@msu.edu