Álvaro Cabeza
Research Subjects
Álvaro Cabeza has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
F. Sobrón
High Pressure Processes Group, Department of Chemical Engineering and Environmental Tech., University of Valladolid, 47011 Valladolid, Spain
4 shared publications- Juan García-Serna
Department of Chemical Engineering and Environmental Technology, High Pressure Processes Group, University of Valladolid, Valladolid ES-47011, Spain
4 shared publications - María López-Abelairas
Idener Research and Development A.I.E., La Rinconada, Sevilla, 41300, Spain
3 shared publications Abraham Aliko
BIOTECH, IDENER RESEARCH AND DEVELOPMENT AIE, LA RINCONADA, SEVILLE, 41300, Spain
2 shared publicationsBernd Wittgens
Process Technology, SINTEF Industry, Trondheim, Trøndelag, NO-7465, Norway
2 shared publications- Eloy Ottaviano
ENSO INNOVATION, CULLEREDO, A CORUÑA, 15180, Spain
2 shared publications
Latest Publications
- Open Access
- 24 December 2024
- Published by CERN in Open Research Europe
- Vol. 4, 5
Innovative vanillin yielding from lignin: process modelling and assessment
In this work, we present the modelling of a novel process to promote vanillin production from lignin using PODIC ®. The model includes the PODIC® production, lignin depolymerisation, and final product separation. Furthermore, a complete assessment of the proposed process in terms of economic and environmental performance was carried out. Regarding the economic evaluation, a comprehensive study was done leading to high investment (13.76 €/kg lignin) and operational (5.16 €/kg lignin) costs. The main reasons for the elevated costs were identified and alternative process configurations were evaluated. Despite this, the main result was that the proposed process is challenging to commercialize. An environmental analysis of the environmental impacts generated by the overall production process of vanillin and phenolic compounds was carried out considering energy consumption, human health, greenhouse gas emissions, water consumption and human toxicity. Electricity consumption of the PODIC ® reactor was identified as the hotspot of the system. The CO 2 emissions were also compared with the Borregaard process and found to be similar.
- 24 December 2024
- Published by CERN in Open Research Europe
- Vol. 4, 5
Open AccessInnovative vanillin yielding from lignin: process modelling and assessment
In this work, we present the modelling of a novel process to promote vanillin production from lignin using PODIC ®. The model includes the PODIC® production, lignin depolymerisation, and final product separation. Furthermore, a complete assessment of the proposed process in terms of economic and environmental performance was carried out. Regarding the economic evaluation, a comprehensive study was done leading to high investment (13.76 €/kg lignin) and operational (5.16 €/kg lignin) costs. The main reasons for the elevated costs were identified and alternative process configurations were evaluated. Despite this, the main result was that the proposed process is challenging to commercialize. An environmental analysis of the environmental impacts generated by the overall production process of vanillin and phenolic compounds was carried out considering energy consumption, human health, greenhouse gas emissions, water consumption and human toxicity. Electricity consumption of the PODIC ® reactor was identified as the hotspot of the system. The CO 2 emissions were also compared with the Borregaard process and found to be similar.
- Open Access
- 8 January 2024
- Published by CERN in Open Research Europe
- Vol. 4, 5
Innovative vanillin yielding from lignin: process modelling and assessment
In this work, we present the modelling of a novel process to promote vanillin production from lignin using PODIC ®. The model includes the PODIC © production, lignin depolymerisation and final product separation. Furthermore, a complete assessment of the proposed process in terms of economic and environmental performance was performed. Regarding the economic evaluation, a comprehensive study was done leading to high investment (13.76 €/kg Lignin) and operational (5.16 €/kg Lignin) costs. The main reasons for the elevated costs were identified and further alternative process configuration were evaluated too. Despite this, the main result was that the proposed process is challenging to commercialize. Since it is complex to obtain profits even at larger scales, improvement of the process design to improve the economics are considered. An environmental analysis of the environmental impacts generated by the overall production process of vanillin and phenolic compounds was carried out considering energy consumption, human health, greenhouse gas emissions, water consumption and human toxicity. Electricity consumption of the PODIC ® reactor was identified as the hotspot of the system. The CO 2 emissions were also compared with the Borregaard process and found to be similar.
- 8 January 2024
- Published by CERN in Open Research Europe
- Vol. 4, 5
Open AccessInnovative vanillin yielding from lignin: process modelling and assessment
In this work, we present the modelling of a novel process to promote vanillin production from lignin using PODIC ®. The model includes the PODIC © production, lignin depolymerisation and final product separation. Furthermore, a complete assessment of the proposed process in terms of economic and environmental performance was performed. Regarding the economic evaluation, a comprehensive study was done leading to high investment (13.76 €/kg Lignin) and operational (5.16 €/kg Lignin) costs. The main reasons for the elevated costs were identified and further alternative process configuration were evaluated too. Despite this, the main result was that the proposed process is challenging to commercialize. Since it is complex to obtain profits even at larger scales, improvement of the process design to improve the economics are considered. An environmental analysis of the environmental impacts generated by the overall production process of vanillin and phenolic compounds was carried out considering energy consumption, human health, greenhouse gas emissions, water consumption and human toxicity. Electricity consumption of the PODIC ® reactor was identified as the hotspot of the system. The CO 2 emissions were also compared with the Borregaard process and found to be similar.
- Open Access
- 19 May 2022
- Published by CERN in Open Research Europe
- Vol. 2, 62
Modelling and mathematical optimisation of wastewater treatment in food industries
The current paper describes the work carried out in the Horizon 2020 AFTERLIFE project – "Advanced Filtration TEchnologies for the Recovery and Later conversIon of relevant Fractions from wastEwater" – (Grant Agreement no. 745737) which focuses on bioprocess modelling and optimisation using computational tools. The project addresses the development of a flexible, cost- and resource-efficient process framed in the zero-waste and circular economy approach for the recovery and valorisation of the relevant fractions from wastewater. The first step of such a process is an initial step consisting of a cascade of membrane filtration units to separate the total solids in sewage. Then, the concentrates recovered in each unit will be treated to obtain high-pure extracts and metabolites or to be converted into value-added biopolymers (polyhydroxyalkanoates). Moreover, the outflow of the process is an ultra-pure water stream that can be directly reused. Following a holistic approach, the design and optimisation of the AFTERLIFE process will improve performance and reduce the costs associated with wastewater treatment by maximising the value recovery. The paper focuses on the work done developing and implementing computational tools to model and optimise the design of the process. A framework for modelling-based optimisation has been developed. The applied optimisation approach is not computationally demanding and can be systematically applied to different processes. Finally, a use case establishing a scenario for testing the developed framework is described. The defined process model and optimisation methodology were applied to simulate the treatment of wastewater from the fish processing industry. The performance of the optimisation tool is analysed considering the simulation results.
- 19 May 2022
- Published by CERN in Open Research Europe
- Vol. 2, 62
Open AccessModelling and mathematical optimisation of wastewater treatment in food industries
The current paper describes the work carried out in the Horizon 2020 AFTERLIFE project – "Advanced Filtration TEchnologies for the Recovery and Later conversIon of relevant Fractions from wastEwater" – (Grant Agreement no. 745737) which focuses on bioprocess modelling and optimisation using computational tools. The project addresses the development of a flexible, cost- and resource-efficient process framed in the zero-waste and circular economy approach for the recovery and valorisation of the relevant fractions from wastewater. The first step of such a process is an initial step consisting of a cascade of membrane filtration units to separate the total solids in sewage. Then, the concentrates recovered in each unit will be treated to obtain high-pure extracts and metabolites or to be converted into value-added biopolymers (polyhydroxyalkanoates). Moreover, the outflow of the process is an ultra-pure water stream that can be directly reused. Following a holistic approach, the design and optimisation of the AFTERLIFE process will improve performance and reduce the costs associated with wastewater treatment by maximising the value recovery. The paper focuses on the work done developing and implementing computational tools to model and optimise the design of the process. A framework for modelling-based optimisation has been developed. The applied optimisation approach is not computationally demanding and can be systematically applied to different processes. Finally, a use case establishing a scenario for testing the developed framework is described. The defined process model and optimisation methodology were applied to simulate the treatment of wastewater from the fish processing industry. The performance of the optimisation tool is analysed considering the simulation results.
- Open Access
- 1 January 2017
- Published by Elsevier in Chemical Engineering Journal
- Vol. 308, 110-125
Online integrated fractionation-hydrolysis of lignocellulosic biomass using sub- and supercritical water
- 1 January 2017
- Published by Elsevier in Chemical Engineering Journal
- Vol. 308, 110-125
Open AccessOnline integrated fractionation-hydrolysis of lignocellulosic biomass using sub- and supercritical water
- Open Access
- 1 October 2016
- Published by Elsevier in The Journal of Supercritical Fluids
- Vol. 116, 198-208
Simulation of the supercritical CO2 extraction from natural matrices in packed bed columns: User-friendly simulator tool using Excel
- 1 October 2016
- Published by Elsevier in The Journal of Supercritical Fluids
- Vol. 116, 198-208
Open AccessSimulation of the supercritical CO2 extraction from natural matrices in packed bed columns: User-friendly simulator tool using Excel
- Open Access
- 1 July 2016
- Published by Elsevier in Fuel Processing Technology
- Vol. 148, 350-360
Optimal conditions for hemicelluloses extraction from Eucalyptus globulus wood: hydrothermal treatment in a semi-continuous reactor
- 1 July 2016
- Published by Elsevier in Fuel Processing Technology
- Vol. 148, 350-360
Open AccessOptimal conditions for hemicelluloses extraction from Eucalyptus globulus wood: hydrothermal treatment in a semi-continuous reactor
- 1 January 2016
- Published by Elsevier in Bioresource Technology
- Vol. 200, 90-102
Modeling of biomass fractionation in a lab-scale biorefinery: Solubilization of hemicellulose and cellulose from holm oak wood using subcritical water
- 1 January 2016
- Published by Elsevier in Bioresource Technology
- Vol. 200, 90-102
Modeling of biomass fractionation in a lab-scale biorefinery: Solubilization of hemicellulose and cellulose from holm oak wood using subcritical water
- Open Access
- 1 December 2015
- Published by Elsevier in Chemical Engineering Science
- Vol. 138, 59-70
Two-phase modelling and simulation of the hydrothermal fractionation of holm oak in a packed bed reactor with hot pressurized water
- 1 December 2015
- Published by Elsevier in Chemical Engineering Science
- Vol. 138, 59-70
Open AccessTwo-phase modelling and simulation of the hydrothermal fractionation of holm oak in a packed bed reactor with hot pressurized water