RSRobert R. Seal

Robert R. Seal

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Robert R. Seal has a total of 109 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Earth Mapping Resources Initiative protocols—Sampling hard-rock mine waste and perpetual mine water sources

    by Kate M. Campbell, Robert R. Seal, Nadine M. Piatak, Jaime S. Azain, Jean M. Morrison, Sarah Jane White, Andrew H. Manning, Katherine Walton-Day, JoAnn M. Holloway, Bronwen Wang

    Supporting the overarching goal to evaluate critical minerals nationwide, the mine waste characterization effort in the U.S. Geological Survey (USGS) Earth Mapping Resources Initiative has created a series of protocols to standardize sampling carried out under this effort by the participating State geological surveys and their cooperators. The protocols are based on published, reviewed methods that can be deployed in the field. The protocols include (1) collecting and processing composite samples of mine and mill waste, including tailings, waste rock, gangue, heap leach piles, ore stockpiles, slag, or other mineralized and processed materials and (2) collecting and preserving water samples from perpetual or long-term mine water sources. The protocols also specify information to document on field sheets and detail the collection of geospatial data. The analytical methods used by the USGS and USGS contract laboratories are described in this report, including the data delivery pathway for USGS-derived data.

  • Open Access

    Critical minerals in mine waste

    by Nadine M. Piatak, Sarah Jane White, Sarah M. Hayes, Robert R. Seal

    Critical minerals are commodities with vulnerable supply chains that play a vital role in supporting the United States’ economy, national defense and security, emerging technologies, and energy independence. The prosperity of our Nation depends on generating a resilient supply of domestic critical minerals; mine waste may be an untapped source of these commodities. Mine waste from centuries of legacy mining persist on the landscape and may contain critical minerals and other valuable commodities previously deemed uneconomic to recover. At modern mines, the financial viability of recovering byproduct critical minerals, which are not the primary target, may be marginal and can ultimately destine them to mine waste. Further, mine waste can be a liability for the mining company or, at legacy mines, the taxpayer because of its effect on the landscape. The U.S. Geological Survey (USGS) has several initiatives to evaluate critical mineral resources in various types of waste. This factsheet highlights studies of mine waste carried out by USGS scientists at the Geology, Energy & Minerals Science Center in collaboration with other science centers funded through the USGS Mineral Resources Program. Recovery of critical minerals from mine waste can aid in remediation efforts and increase domestic supply of vital mineral resources.


  • Open Access

    Using stable oxygen isotope dual‐inlet isotope‐ratio mass spectrometry to elucidate uranium transport and mixed 230 Th/U calcite formation ages at the seminal Devils Hole, Nevada, natural laboratory

    by Tyler B. Coplen, Robert R. Seal, Lauren T. Reid, James A. Jordan, Adam C. Mumford

    Rationale: Vein calcite in Devils Hole has been precipitating continuously in oxygen‐isotope equilibrium at a constant temperature for over 500 000 years, providing an unmatched δ 18 O paleoclimate time series. A substantial issue is that coeval calcite (based on matching δ 18 O values) has uranium‐series ages differing by 12 000 years. Methods: An unparalleled high‐accuracy δ 18 O chronology series from continuously submerged calcite was used to correct the published uranium‐series ages of non‐continuously formed calcite in two cores, cyclically exposed by water‐table decline during glacial–interglacial transitions. This method relies on the premise that the δ 18 O values of coevally precipitated calcite are identical, allowing matching calcite δ 18 O values to establish formation ages. Results: Exposed calcite can have apparent ages that are 12 000 years too young due to unrecognized uranium mobility and resulting mixed ages identified in over 50 mixed uranium‐series ages from previous studies. Secondary uranium in fluids, sourced from the formation or dissolution of porous carbonate deposits (folia) with high uranium‐238 ( 238 U) concentrations, has migrated up to 10 mm into vein calcite. Conclusions: The continuously submerged Devils Hole δ 18 O chronology is not explained by orbital forcing. Rather, this chronology represents a regional climate record in the southern Great Basin of sea‐surface‐temperature (SST) variations off California, variations that preceded the last and penultimate deglaciations by 5000 to approximately 10 000 years. Temporal discrepancies between the continuously submerged Devils Hole chronology and other regional δ 18 O records (e.g., the Leviathan chronology) can be explained by unrecognized cryptic, pernicious uranium mobility, leading to model estimations that may be thousands of years younger than actual ages. Consequently, paleo‐moisture availability, water‐table, and groundwater recharge models based on these mixed uranium‐series ages are too young by as much as 12 000 years. The potential for post‐formation uranium addition in subaerial cores and speleothems underscores the need for caution in uranium‐series dating, highlighting δ 18 O time‐series comparisons as a method for identifying mixed ages.

  • Open Access

    Geoenvironmental Model for Roll-Type Uranium Deposits in the Texas Gulf Coast

    by Katherine Walton-Day, Johanna Blake, Robert R. Seal, Tanya J. Gallegos, Jean Dupree, Kent D. Becher

    Geoenvironmental models were formulated by the U.S. Geological Survey in the 1990s to describe potential environmental effects of extracting different types of ore deposits in different geologic and climatic regions. This paper presents a geoenvironmental model for roll-front (roll-type) uranium deposits in the Texas Coastal Plain. The model reviews descriptive and quantitative information derived from environmental studies and existing databases to depict existing conditions and potential environmental concerns associated with mining this deposit type. This geoenvironmental model describes how features of the deposits including host rock; ore and gangue mineralogy; geologic, hydrologic, and climatic settings; and mining methods (legacy open-pit and in situ recovery [ISR]) influence potential environmental effects from mining. Element concentrations in soil and water are compared to regulatory thresholds to depict ambient surface water and groundwater conditions. Although most open-pit operations in this region have been reclaimed, concerns remain about groundwater quality at three of the four former mills that supported former open-pit mines and are undergoing closure activities. The primary environmental concerns with ISR mining are (1) radon gas at active ISR operations, (2) radiation or contaminant leakage during production and transport of ISR resin or yellowcake, (3) uranium excursions into groundwater surrounding active ISR operations, and (4) contamination of groundwater after ISR mining. Although existing regulations attempt to address these concerns, some problems remain. Researchers suggest that reactive transport modeling and a better understanding of geology, stratigraphy, and geochemistry of ISR production areas could minimize excursions into surrounding aquifers and improve results of groundwater restoration.


  • Open Access

    Conceptual framework and approach for conducting a geoenvironmental assessment of undiscovered uranium resources

    by Tanya J. Gallegos, Katherine Walton-Day, Robert R. Seal

    This report presents a novel conceptual framework and approach for conducting a geologically based environmental assessment, or geoenvironmental assessment, of undiscovered uranium resources within an area likely to contain uranium deposits. The framework is based on a source-to-receptor model that prioritizes the most likely contaminant sources, contaminant pathways, and affected environmental media for three common uranium extraction methods—open pit or underground mining with milling and in situ recovery (ISR). Data on regional geology, hydrology, and climate, as well as historical uranium mining and milling records are used to estimate the probable amounts of waste rock, tailings, wastewater, surface land disturbance, and subsurface aquifer disturbance for likely mining methods. Constituents of concern that might take the form of leachates, dust, radon, and sediments formed by chemical and physical weathering are also identified in the geoenvironmental assessment. Finally, areas where constituents of concern are likely to occur and persist in air, land,...


  • Aluminum hydroxide coatings in limestone drains

    by Sheyla B. Palomino-Ore, J. Donald Rimstidt, John A. Chermak, Madeline E. Schreiber, Robert R. Seal


  • Hydrologic balance, water quality, chemical-mass balance, and geochemical modeling of hyperalkaline ponds at Big Marsh, Chicago, Illinois, 2016–17

    by Amy M. Gahala, Robert R. Seal, Nadine M. Piatak

    Hyperalkaline (pH greater than 12) ponds and groundwater exist at Big Marsh near Lake Calumet, Chicago, Illinois, a site used by the steel industry during the mid-1900s to deposit steel- and iron-making waste, in particular, slag. The hyperalkaline ponds may pose a hazard to human health and the environment. The U.S. Geological Survey (USGS), in cooperation with the Environmental Protection Agency (EPA) and in collaboration with the City of Chicago’s Park District, completed a study to evaluate the hydrologic balance, water quality, and chemical-mass balance of hyperalkaline ponds at Big Marsh and geochemical modeling used to evaluate remediation options for water quality at the site based on data collected in 2016–17.Synoptic measurements of surface-water and groundwater elevations were used to determine flow directions and to enable a preliminary estimate of the hydrologic balance for the ponds. Water-quality samples also were collected and analyzed for selected constituents including major anions and cations, nutrients, metals, and trace elements. The results of the water-quality analyses were used to develop a geochemical model to evaluate concentrations, factors affecting pH, and the state of equilibrium between surface waters and atmospheric carbon dioxide. The geochemical model was used to evaluate remediation scenarios using riprap, spillways, or active aeration. The results indicate that active aeration will decrease the pH to near 7.5 in about 8 hours, the fastest rate of the scenarios. Passive aeration, such as riprap or spillways, also can be effective at decreasing the pH in about 45 hours, but spatial obstacles limit their implementation. Seasonal variations in temperature also affect the rate of equilibration, where colder temperatures may have a lower pH than warmer temperatures and may affect the timing and frequency of remediation.


  • Tellurium

    by Richard J. Goldfarb, Byron R. Berger, Micheal W. George, Robert R. Seal

    Tellurium (Te) is a very rare element that averages only 3 parts per billion in Earth’s upper crust. It shows a close association with gold and may be present in orebodies of most gold deposit types at levels of tens to hundreds of parts per million. In large-tonnage mineral deposits, such as porphyry copper and seafloor volcanogenic massive sulfide deposits, sulfide minerals may contain hundreds of parts per million tellurium, although the orebodies likely have overall concentrations of 0.1 to 1.0 parts per million tellurium. Tellurium is presently recovered as a primary ore from only two districts in the world; these are the gold-tellurium epithermal vein deposits located adjacent to one another at Dashuigou and Majiagou (Sichuan Province) in southwestern China, and the epithermal-like mineralization at the Kankberg deposit in the Skellefteå VMS district of Västerbotten County, Sweden. Combined, these two groups of deposits account for about 15 percent (about 70 metric tons) of the annual global production of between 450 and 470 metric tons of tellurium. Most of the world’s tellurium, however, is produced as a byproduct of the mining of porphyry copper deposits. These deposits typically yield concentrations of 1 to 4 percent tellurium in the anode slimes recovered during copper refining. Present production of tellurium from the United States is solely from the anode slimes at ASARCO LLC’s copper refinery in Amarillo, Texas, and may total about 50 metric tons per year. The main uses of tellurium are in photovoltaic solar cells and as an additive to copper, lead, and steel alloys in various types of machinery. The environmental data available regarding the mining of tellurium are limited; most concerns to date have focused on the more-abundant metals present in the large-tonnage deposits from which tellurium is recovered as a byproduct. Global reserves of tellurium are estimated to be 24,000 metric tons, based on the amount of tellurium likely contained in global copper reserves and on a 50 percent recovery rate from refinery anode slimes during the commonly used electrolytic process, also known as solvent extraction-electrolytic refining. If the more economical solvent-leach process—a process that does not recover tellurium—is increasingly used in the future to recover lower grades of copper from porphyry and other large-tonnage deposits, then additional high-grade tellurium-rich gold deposits may become new primary sources for tellurium, particularly epithermal vein deposits associated with alkaline magmatism.