Jordi Ignés-Mullol
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Jordi Ignés-Mullol has a total of 281 co-authors. Here are the top co-authors by number of shared publications:
- Francesc Sagués
Universitat de Barcelona
60 shared publications Francesc Sagués
Departament de Ciència de Materials i Química Física Universitat de Barcelona Barcelona Catalonia Spain
14 shared publicationsJosep Claret
Departament de Química Física and Institut de Nanociència i Nanotecnologia, Universitat de Barcelona, Barcelona, Catalonia 08028, Spain
14 shared publications- Joaquim Crusats
Section of Organic Chemistry, Department of Inorganic and Organic Chemistry, Faculty of Chemistry, University of Barcelona, C. de Martí i Franquès 1-11, 08028 Barcelona, Spain
8 shared publications - Patrick Oswald
ENS de Lyon, CNRS, Laboratoire de Physique, F-69342 Lyon, France
7 shared publications Rosa Albalat
Departament de Química Física and ‡Departament de Química Orgànica, Institute of Nanoscience and Nanotechnology, Universitat de Barcelona, Martí i Franquès 1, 08028 Barcelona, Spain
7 shared publications
Latest Publications
- Open Access
- 30 September 2026
- Published by Springer Nature in Nature Physics
- Vol. 22 (11) , 1847-1853
Fully developed active turbulence defined through a non-equilibrium phase transition
- 30 September 2026
- Published by Springer Nature in Nature Physics
- Vol. 22 (11) , 1847-1853
Open AccessFully developed active turbulence defined through a non-equilibrium phase transition
- Open Access
- 23 September 2026
- Published by Elsevier in Applied Surface Science
- Vol. 754
Laser-induced local wetting on self-assembled monolayers for microscale fluid control
- 23 September 2026
- Published by Elsevier in Applied Surface Science
- Vol. 754
Open AccessLaser-induced local wetting on self-assembled monolayers for microscale fluid control
- Open Access
- 17 June 2026
- Published by Elsevier in SSRN Electronic Journal
Laser-induced local wetting on self-assembled monolayers for microscale fluid control
Precise spatial control of surface wettability is central to emerging technologies in microfluidics, biosensing, and medical applications. However, current methods for wetting control can be limited by low spatial resolution, a narrow range of achievable wettability modulation, or reliance on masks that are time-consuming to fabricate. Here, we introduce Laser-Induced Local Wetting (LILoW), a maskless technique that uses nanosecond ultraviolet laser pulses to selectively change the wettability of self-assembled monolayer (SAM) coated surfaces. By locally irradiating the SAM coating near its ablation threshold to expose selected regions of the underlying substrate, LILoW combines the broad wetting tunability of coating-based approaches with the high-resolution patterning capabilities of laser systems. We describe the principle of the technique and analyze the contrast in wettability - up to nearly 90 °- as a function of laser parameters, including laser pulse energy and irradiation pitch, all without inducing damage to the substrate. As a proof of concept, we fabricated an open-air, pumpless Y-shaped microfluidic guide that facilitates capillary-driven laminar co-flow, with high interfacial stability in the absence of physical wall confinement. The rapid and cost-effective platform represented by LILoW can pave the way to democratizing high-resolution wettability patterning for bioanalytical sensing and surface-guided chemical applications.
- 17 June 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessLaser-induced local wetting on self-assembled monolayers for microscale fluid control
Precise spatial control of surface wettability is central to emerging technologies in microfluidics, biosensing, and medical applications. However, current methods for wetting control can be limited by low spatial resolution, a narrow range of achievable wettability modulation, or reliance on masks that are time-consuming to fabricate. Here, we introduce Laser-Induced Local Wetting (LILoW), a maskless technique that uses nanosecond ultraviolet laser pulses to selectively change the wettability of self-assembled monolayer (SAM) coated surfaces. By locally irradiating the SAM coating near its ablation threshold to expose selected regions of the underlying substrate, LILoW combines the broad wetting tunability of coating-based approaches with the high-resolution patterning capabilities of laser systems. We describe the principle of the technique and analyze the contrast in wettability - up to nearly 90 °- as a function of laser parameters, including laser pulse energy and irradiation pitch, all without inducing damage to the substrate. As a proof of concept, we fabricated an open-air, pumpless Y-shaped microfluidic guide that facilitates capillary-driven laminar co-flow, with high interfacial stability in the absence of physical wall confinement. The rapid and cost-effective platform represented by LILoW can pave the way to democratizing high-resolution wettability patterning for bioanalytical sensing and surface-guided chemical applications.
- Open Access
Soft Colloidal Robots: Magnetically Guided Liquid Crystal Torons for Targeted Micro‐Cargo Delivery
Quasiparticles in liquid crystals, such as torons and skyrmions, represent a new class of topologically protected solitonic excitations, offering a promising route toward soft microrobotics. Here we demonstrate that torons can be propelled by modulated electric fields and magnetically steered with full directional control, thus achieving programmable trajectories without net liquid flow. Within microfluidic architectures, we guide ensembles of torons through confined channels and realize targeted pick‐up, transport, and release of colloidal cargo. By combining experiments and numerical simulations, we uncover how magnetic alignment reshapes toron structure, speed, and stability, while confinement within microchannels gives rise to novel transport regimes. Unlike conventional colloidal inclusions, torons are intrinsically uniform, soft, and reconfigurable, establishing them as both an ideal model system for studying emergent phenomena in active topological matter and a versatile platform for next‐generation soft robots, adaptive delivery systems, and smart active matter.
Open AccessSoft Colloidal Robots: Magnetically Guided Liquid Crystal Torons for Targeted Micro‐Cargo Delivery
Quasiparticles in liquid crystals, such as torons and skyrmions, represent a new class of topologically protected solitonic excitations, offering a promising route toward soft microrobotics. Here we demonstrate that torons can be propelled by modulated electric fields and magnetically steered with full directional control, thus achieving programmable trajectories without net liquid flow. Within microfluidic architectures, we guide ensembles of torons through confined channels and realize targeted pick‐up, transport, and release of colloidal cargo. By combining experiments and numerical simulations, we uncover how magnetic alignment reshapes toron structure, speed, and stability, while confinement within microchannels gives rise to novel transport regimes. Unlike conventional colloidal inclusions, torons are intrinsically uniform, soft, and reconfigurable, establishing them as both an ideal model system for studying emergent phenomena in active topological matter and a versatile platform for next‐generation soft robots, adaptive delivery systems, and smart active matter.
- Open Access
- 16 April 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
Topological defects lead to energy transfer in active nematics
Active nematics are fluids in which the components have nematic symmetry and are driven out of equilibrium due to the microscopic generation of an active stress. When the active stress is high, it drives flows in the nematic and can lead to the proliferation of topological defects, a state we refer to as defect chaos. Using numerical simulations of active nematics at low Reynolds number, we observe energy transfer from long to short length scales during defect chaos. We demonstrate that this energy transfer is driven by the exchange between variations in the orientation and degree of order in the nematic that predominantly occurs during defect creation and annihilation. We then show that the primary features of energy transfer during defect chaos scale with the active length scale. Finally, we identify a second regime that forms extended bend walls instead of point like topological defects, which we refer to as bend wall chaos. The bend walls grow and extend over the whole system and result in an energy transfer from short to long length scales.
- 16 April 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
Open AccessTopological defects lead to energy transfer in active nematics
Active nematics are fluids in which the components have nematic symmetry and are driven out of equilibrium due to the microscopic generation of an active stress. When the active stress is high, it drives flows in the nematic and can lead to the proliferation of topological defects, a state we refer to as defect chaos. Using numerical simulations of active nematics at low Reynolds number, we observe energy transfer from long to short length scales during defect chaos. We demonstrate that this energy transfer is driven by the exchange between variations in the orientation and degree of order in the nematic that predominantly occurs during defect creation and annihilation. We then show that the primary features of energy transfer during defect chaos scale with the active length scale. Finally, we identify a second regime that forms extended bend walls instead of point like topological defects, which we refer to as bend wall chaos. The bend walls grow and extend over the whole system and result in an energy transfer from short to long length scales.
- Open Access
- 12 November 2025
- Published by National Academy of Sciences in Proceedings of the National Academy of Sciences
- Vol. 122 (46)
Active nematic pumps
Microfluidics involves the manipulation of flows at the microscale, typically requiring external power sources to generate pressure gradients. Alternatively, harnessing flows from active fluids, which are usually chaotic, has been proposed as a paradigm for the development of micromachines. Here, by combining experimental realizations and simulations, we demonstrate that the addition of triangular-shaped obstacles into an active nematic gel can locally break the fore–aft symmetry of active turbulence and stabilize flow fields with self-pumping capabilities. The proposed strategy has enabled us to generate wall-free and self-powered microfluidic systems capable of both cargo transport and mixing along with the downstream flow. We analyze the performance of these active pumps, both isolated and within cooperative ensembles in terms of their output velocity and hydrostatic pressure buildup. Finally, we demonstrate strategies to incorporate them into specifically designed microfluidic platforms to advantageously tailor the geometry of active flows. Our results reveal possibilities for leveraging the self-organized mechanodynamics of active fluids.
- 12 November 2025
- Published by National Academy of Sciences in Proceedings of the National Academy of Sciences
- Vol. 122 (46)
Open AccessActive nematic pumps
Microfluidics involves the manipulation of flows at the microscale, typically requiring external power sources to generate pressure gradients. Alternatively, harnessing flows from active fluids, which are usually chaotic, has been proposed as a paradigm for the development of micromachines. Here, by combining experimental realizations and simulations, we demonstrate that the addition of triangular-shaped obstacles into an active nematic gel can locally break the fore–aft symmetry of active turbulence and stabilize flow fields with self-pumping capabilities. The proposed strategy has enabled us to generate wall-free and self-powered microfluidic systems capable of both cargo transport and mixing along with the downstream flow. We analyze the performance of these active pumps, both isolated and within cooperative ensembles in terms of their output velocity and hydrostatic pressure buildup. Finally, we demonstrate strategies to incorporate them into specifically designed microfluidic platforms to advantageously tailor the geometry of active flows. Our results reveal possibilities for leveraging the self-organized mechanodynamics of active fluids.
- Top Cited PapersOpen Access
- 27 June 2025
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 19 (27) , 24174-24334
Technology Roadmap of Micro/Nanorobots
Inspired by Richard Feynman's 1959 lecture and the 1966 film Fantastic Voyage, the field of micro/nanorobots has evolved from science fiction to reality, with significant advancements in biomedical and environmental applications. Despite the rapid progress, the deployment of functional micro/nanorobots remains limited. This review of the technology roadmap identifies key challenges hindering their widespread use, focusing on propulsion mechanisms, fundamental theoretical aspects, collective behavior, material design, and embodied intelligence. We explore the current state of micro/nanorobot technology, with an emphasis on applications in biomedicine, environmental remediation, analytical sensing, and other industrial technological aspects. Additionally, we analyze issues related to scaling up production, commercialization, and regulatory frameworks that are crucial for transitioning from research to practical applications. We also emphasize the need for interdisciplinary collaboration to address both technical and nontechnical challenges, such as sustainability, ethics, and business considerations. Finally, we propose a roadmap for future research to accelerate the development of micro/nanorobots, positioning them as essential tools for addressing grand challenges and enhancing the quality of life.
- 27 June 2025
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 19 (27) , 24174-24334
Top Cited PapersOpen AccessTechnology Roadmap of Micro/Nanorobots
Inspired by Richard Feynman's 1959 lecture and the 1966 film Fantastic Voyage, the field of micro/nanorobots has evolved from science fiction to reality, with significant advancements in biomedical and environmental applications. Despite the rapid progress, the deployment of functional micro/nanorobots remains limited. This review of the technology roadmap identifies key challenges hindering their widespread use, focusing on propulsion mechanisms, fundamental theoretical aspects, collective behavior, material design, and embodied intelligence. We explore the current state of micro/nanorobot technology, with an emphasis on applications in biomedicine, environmental remediation, analytical sensing, and other industrial technological aspects. Additionally, we analyze issues related to scaling up production, commercialization, and regulatory frameworks that are crucial for transitioning from research to practical applications. We also emphasize the need for interdisciplinary collaboration to address both technical and nontechnical challenges, such as sustainability, ethics, and business considerations. Finally, we propose a roadmap for future research to accelerate the development of micro/nanorobots, positioning them as essential tools for addressing grand challenges and enhancing the quality of life.
- Open Access
- 6 May 2025
- Published by MDPI AG in Colloids and Interfaces
- Vol. 9 (3) , 27
Magnetic Field Control of Liquid Crystal-Enabled Colloid Electrophoresis
Microswimmers are key for unveiling new physical phenomena underlying their propulsion, especially when driven inside complex fluids. Liquid crystals are anisotropic complex fluids that feature long-range orientational order. The propulsion of non-charged dielectric particles can be accomplished in these systems by breaking the particles’ fore-aft symmetry thanks to anisotropies in the conductivity and dielectric permittivity parameters of the liquid crystal. Under the application of an AC electric field, asymmetric osmotic flows are generated to propel non-spherical particles, whose direction of motion depends on the orientational order of the liquid crystal molecules around the inclusions. This means that, by controlling the LC orientation, one will be able to steer driven colloidal inclusions. In this experimental work, we show that a homogeneous magnetic field that is able to control the orientation of the liquid crystal molecules also allows us to determine the direction of motion of driven particles without significant changes in the propulsion mechanism. Additionally, we show that a radial configuration of the magnetic field lines can be used to generate topological defects in the liquid crystal orientational field that attract colloidal particles, leading to their clustering as rotating mills. The generated clusters were tested to study the collective motion of particles, suggesting the presence of particle–particle interactions.
- 6 May 2025
- Published by MDPI AG in Colloids and Interfaces
- Vol. 9 (3) , 27
Open AccessMagnetic Field Control of Liquid Crystal-Enabled Colloid Electrophoresis
Microswimmers are key for unveiling new physical phenomena underlying their propulsion, especially when driven inside complex fluids. Liquid crystals are anisotropic complex fluids that feature long-range orientational order. The propulsion of non-charged dielectric particles can be accomplished in these systems by breaking the particles’ fore-aft symmetry thanks to anisotropies in the conductivity and dielectric permittivity parameters of the liquid crystal. Under the application of an AC electric field, asymmetric osmotic flows are generated to propel non-spherical particles, whose direction of motion depends on the orientational order of the liquid crystal molecules around the inclusions. This means that, by controlling the LC orientation, one will be able to steer driven colloidal inclusions. In this experimental work, we show that a homogeneous magnetic field that is able to control the orientation of the liquid crystal molecules also allows us to determine the direction of motion of driven particles without significant changes in the propulsion mechanism. Additionally, we show that a radial configuration of the magnetic field lines can be used to generate topological defects in the liquid crystal orientational field that attract colloidal particles, leading to their clustering as rotating mills. The generated clusters were tested to study the collective motion of particles, suggesting the presence of particle–particle interactions.
- 26 February 2025
- Published by American Physical Society (APS) in Physical Review Letters
- Vol. 134 (8) , 088301
Beyond Dipolar Activity: Quadrupolar Stress Drives Collapse of Nematic Order on Frictional Substrates
The field of active nematics has traditionally employed descriptions based on dipolar activity. However, it is theoretically predicted that interactions with a substrate, prevalent in most biological systems, lead to novel forms of activity, such as quadrupolar activity, that are governed by hydrodynamic screening. Here, combining experiments and numerical simulations, we show that upon light-induced solidification of the underlying medium, microtubule-kinesin mixtures undergo a transformation that leads to a biphasic active suspension. Using an active lyotropic model, we prove that the transition is governed by screening effects that alter the dominant form of active stress. Specifically, the combined effect of friction and quadrupolar activity leads to a hierarchical folding that follows the intrinsic bend instability of the active nematic layer. Our results demonstrate the dynamics of the collapse of orientational order in active nematics and present a new route for controlling active matter by modifying the activity through changing the surrounding environment.
- 26 February 2025
- Published by American Physical Society (APS) in Physical Review Letters
- Vol. 134 (8) , 088301
Beyond Dipolar Activity: Quadrupolar Stress Drives Collapse of Nematic Order on Frictional Substrates
The field of active nematics has traditionally employed descriptions based on dipolar activity. However, it is theoretically predicted that interactions with a substrate, prevalent in most biological systems, lead to novel forms of activity, such as quadrupolar activity, that are governed by hydrodynamic screening. Here, combining experiments and numerical simulations, we show that upon light-induced solidification of the underlying medium, microtubule-kinesin mixtures undergo a transformation that leads to a biphasic active suspension. Using an active lyotropic model, we prove that the transition is governed by screening effects that alter the dominant form of active stress. Specifically, the combined effect of friction and quadrupolar activity leads to a hierarchical folding that follows the intrinsic bend instability of the active nematic layer. Our results demonstrate the dynamics of the collapse of orientational order in active nematics and present a new route for controlling active matter by modifying the activity through changing the surrounding environment.
- Open Access
- 5 November 2024
- Published by Royal Society of Chemistry (RSC) in Soft Matter
- Vol. 20 (48) , 9578-9585
Active nematic coherence probed under spatial patterns of distributed activity
We study the effect of spatiotemporal activity patterns on a kinesin-microtubule active nematic system that is formulated with photodimerizable kinesins. The system reversibly alternates between low (no light) and high (blue light) activity states.
- 5 November 2024
- Published by Royal Society of Chemistry (RSC) in Soft Matter
- Vol. 20 (48) , 9578-9585
Open AccessActive nematic coherence probed under spatial patterns of distributed activity
We study the effect of spatiotemporal activity patterns on a kinesin-microtubule active nematic system that is formulated with photodimerizable kinesins. The system reversibly alternates between low (no light) and high (blue light) activity states.