Gualter Guenther Costa da Silva
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Gualter Guenther Costa da Silva has a total of 84 co-authors. Here are the top co-authors by number of shared publications:
- Ermelinda Maria Mota Oliveira
Universidade Federal do Rio Grande do Norte, Brazil
7 shared publications - Marcio Gleybson da Silva Bezerra
Universidade Federal Rural do Semi-Árido, Brazil
5 shared publications - Alexandre Santos Pimenta
Universidade Federal do Rio Grande do Norte
4 shared publications - João Virgínio Emerenciano Neto
Academic Unit Specialized in Agrarian Sciences, Federal University of Rio Grande do Norte, Macaíba 59280-000, RN, Brazil
4 shared publications - Mary Anne Barbosa de Carvalho
Universidade Federal da Paraíba, Brazil
4 shared publications - Neyton de Oliveira Miranda
Department of Agronomical and Forest Sciences, Universidade Federal Rural do Semiárido—UFERSA, Av. Francisco Mota, 572–Bairro Costa e Silva, Mossoró 59625-900, RN, Brazil
4 shared publications
Latest Publications
- Open Access
Contrasting Weather and Stocking Effects on Eucalyptus Initial Coppice Response in Brazil
In Eucalyptus plantations, coppice rotations often yield less than initial rotations. The TECHS project (Tolerance of Eucalyptus Clones to Hydric, Thermal and Biotic Stresses) studied short rotation coppicing across a 3000 km gradient. The main objective of this work was to compare the survival, sprouting, and initial growth of Eucalyptus clones managed and to examine factors that might influence the productivity of the coppice rotation: climate, genotypes, and stocking. Eight of the TECHS sites spread from latitudes 6° S to 30° S were included in the coppice study, with 17 genotypes at each site. The initial rotation had been planted at a 3 m × 3 m spacing and also in a spacing trial at densities from 500 to 3500 trees ha−1. Six months after harvesting the initial Eucalyptus rotation, average survival was 88%, with tropical clones showing over twice the sprouting biomass (6.7 vs. 2.9 Mg ha−1) and four times the woody biomass compared to subtropical clones (4.7 vs. 1.1 Mg ha−1). Greater initial water deficits had stronger sprouting and growth. Clones with higher belowground carbon allocation in the initial rotation performed better in coppicing, and precipitation became more influential after 12 months. Drought and spacing trials significantly affected growth.
Open AccessContrasting Weather and Stocking Effects on Eucalyptus Initial Coppice Response in Brazil
In Eucalyptus plantations, coppice rotations often yield less than initial rotations. The TECHS project (Tolerance of Eucalyptus Clones to Hydric, Thermal and Biotic Stresses) studied short rotation coppicing across a 3000 km gradient. The main objective of this work was to compare the survival, sprouting, and initial growth of Eucalyptus clones managed and to examine factors that might influence the productivity of the coppice rotation: climate, genotypes, and stocking. Eight of the TECHS sites spread from latitudes 6° S to 30° S were included in the coppice study, with 17 genotypes at each site. The initial rotation had been planted at a 3 m × 3 m spacing and also in a spacing trial at densities from 500 to 3500 trees ha−1. Six months after harvesting the initial Eucalyptus rotation, average survival was 88%, with tropical clones showing over twice the sprouting biomass (6.7 vs. 2.9 Mg ha−1) and four times the woody biomass compared to subtropical clones (4.7 vs. 1.1 Mg ha−1). Greater initial water deficits had stronger sprouting and growth. Clones with higher belowground carbon allocation in the initial rotation performed better in coppicing, and precipitation became more influential after 12 months. Drought and spacing trials significantly affected growth.
- Open Access
- 19 September 2024
- Published by MDPI AG in Preprints.org
Contrasting Weather and Stocking Effects on Eucalyptus Initial Coppice Response in Brazil
In Eucalyptus plantations, coppice rotations often yield less than initial rotations. The TECHS project (Tolerance of Eucalyptus Clones to Hydric, Thermal and Biotic Stresses) studied short rotation coppicing across a 3,000 km gradient. The main objective of this work was to compare the survival, sprouting and initial growth of Eucalyptus clones managed, and to examine factors that might influence the productivity of the coppice rotation: climate, genotypes and stocking. Eight of the TECHS sites spread from latitudes 6o S to 30o S were included in the coppice study, with 17 genotypes at each site. The initial rotation had been planted at a 3 x 3 m spacing, and also in a spacing trial at densities from 450 to 14,000 trees ha-1. Six months after harvesting the initial Eucalyptus rotation, average survival was 88%, with tropical clones showing over twice the sprouting biomass (6.7 vs 2.9 Mg ha-1) and four times the woody biomass compared to subtropical clones (4.7 vs 1.1 Mg ha-1). Greater initial water deficits had stronger sprouting and growth. Clones with higher belowground carbon allocation in the initial rotation performed better in coppicing, and precipitation became more influential after 12 months. Drought and spacing trial significantly affected growth.
- 19 September 2024
- Published by MDPI AG in Preprints.org
Open AccessContrasting Weather and Stocking Effects on Eucalyptus Initial Coppice Response in Brazil
In Eucalyptus plantations, coppice rotations often yield less than initial rotations. The TECHS project (Tolerance of Eucalyptus Clones to Hydric, Thermal and Biotic Stresses) studied short rotation coppicing across a 3,000 km gradient. The main objective of this work was to compare the survival, sprouting and initial growth of Eucalyptus clones managed, and to examine factors that might influence the productivity of the coppice rotation: climate, genotypes and stocking. Eight of the TECHS sites spread from latitudes 6o S to 30o S were included in the coppice study, with 17 genotypes at each site. The initial rotation had been planted at a 3 x 3 m spacing, and also in a spacing trial at densities from 450 to 14,000 trees ha-1. Six months after harvesting the initial Eucalyptus rotation, average survival was 88%, with tropical clones showing over twice the sprouting biomass (6.7 vs 2.9 Mg ha-1) and four times the woody biomass compared to subtropical clones (4.7 vs 1.1 Mg ha-1). Greater initial water deficits had stronger sprouting and growth. Clones with higher belowground carbon allocation in the initial rotation performed better in coppicing, and precipitation became more influential after 12 months. Drought and spacing trial significantly affected growth.
- Open Access
- 1 January 2024
- Published by FapUNIFESP (SciELO) in Revista Caatinga
- Vol. 37, e12385
Growth and nutrient accumulation in elephant grass crop
Elephant grass fertilization is performed more efficiently by analyzing growth curves and nutrient accumulation. This study evaluated elephant grass's growth, dry matter production, and nutrient accumulation. A sampling design was used, with plant collections over time. Elephant grass was cultivated in four plots of 27 m2 during two cultivation cycles. Destructive sampling of four plants was carried out per collection to evaluate dry matter production and nutrient accumulations. In the first cycle, plants were collected at 21, 35, 49, 63, 77, 91, 105 and 119 days after planting. After the last collection of the first cycle, a standardization cut was made, eliminating the remaining plants in the experimental plots. The second cycle of collections was carried out at 21, 35, 49, 63, 77, 91, and 105 days after the uniformity cut. In all collections, the number of tillers per linear meter was counted, and the height of the plants was evaluated. The data were subjected to nonlinear regression analysis. The accumulation of nutrients by elephant grass accompanied the production of dry matter. The highest rates of dry matter production occurred around 70 days. The greatest height growth occurred from 18 to 102 days in the 1st cycle and 8 to 61 days in the 2nd cycle. Nutrient accumulation showed the following decreasing order: K>N>Mg>Ca>P>S>Fe>Mn>Zn>Cu (1st cycle); and K>N>Mg>Ca>P>S>Fe>Zn>Mn>Cu (2nd cycle).
- 1 January 2024
- Published by FapUNIFESP (SciELO) in Revista Caatinga
- Vol. 37, e12385
Open AccessGrowth and nutrient accumulation in elephant grass crop
Elephant grass fertilization is performed more efficiently by analyzing growth curves and nutrient accumulation. This study evaluated elephant grass's growth, dry matter production, and nutrient accumulation. A sampling design was used, with plant collections over time. Elephant grass was cultivated in four plots of 27 m2 during two cultivation cycles. Destructive sampling of four plants was carried out per collection to evaluate dry matter production and nutrient accumulations. In the first cycle, plants were collected at 21, 35, 49, 63, 77, 91, 105 and 119 days after planting. After the last collection of the first cycle, a standardization cut was made, eliminating the remaining plants in the experimental plots. The second cycle of collections was carried out at 21, 35, 49, 63, 77, 91, and 105 days after the uniformity cut. In all collections, the number of tillers per linear meter was counted, and the height of the plants was evaluated. The data were subjected to nonlinear regression analysis. The accumulation of nutrients by elephant grass accompanied the production of dry matter. The highest rates of dry matter production occurred around 70 days. The greatest height growth occurred from 18 to 102 days in the 1st cycle and 8 to 61 days in the 2nd cycle. Nutrient accumulation showed the following decreasing order: K>N>Mg>Ca>P>S>Fe>Mn>Zn>Cu (1st cycle); and K>N>Mg>Ca>P>S>Fe>Zn>Mn>Cu (2nd cycle).
- Open Access
- 30 September 2022
- Published by Centro Internacional de Agricultura Tropical in Tropical Grasslands-Forrajes Tropicales
- Vol. 10 (3) , 280-287
Nitrogen and phosphorus fertilizer application to Elephant grass (Cenchrus purpureus syn. Pennisetum purpureum) cultivar ‘Cameroon’ in an arenosol in Rio Grande do Norte, Brazil
Elephant grass (Cenchrus purpureus syn. Pennisetum purpureum) stands out for its high dry matter production per unit area and good nutritional value and is cultivated throughout Brazil. This study aimed to evaluate the performance of elephant grass cultivar ‘Cameroon’ fertilized with nitrogen (N) and phosphorus (P) at different rates. The experimental design was in randomized blocks with 10 treatments and 4 replicates. The treatments consisted of 5 doses of N (0, 200, 400, 600 and 800 kg N/ha) all with 66 kg P/ha and 5 doses of P (0, 22, 44, 66 and 88 kg P/ha) all with 600 kg N/ha. The variables evaluated during 3 harvests were: shoot dry matter (DM) yield, N and P concentrations in shoots, and uptakes of N and P in forage. Results showed that, in the arenosol of the experimental area, high doses of N and P could produce high yields of the grass (40‒41 t DM/ha) over 260 days. The grass extracted large amounts of N (on average, 800 kg N/ha over 260 days) and P concentrations were significantly affected by P fertilization only in the last harvest, where it increased from 0.27 to 0.78 g P/kg DM. However, application of only 200 kg N/ha will produce more than 60% of the DM yield response achieved with 800 kg N/ha. Similarly, there seems little merit in applying more than 22 kg P/ha with the N. Longer-term studies are needed to test these hypotheses along with economic assessments to determine the financial soundness of such decisions.
- 30 September 2022
- Published by Centro Internacional de Agricultura Tropical in Tropical Grasslands-Forrajes Tropicales
- Vol. 10 (3) , 280-287
Open AccessNitrogen and phosphorus fertilizer application to Elephant grass (Cenchrus purpureus syn. Pennisetum purpureum) cultivar ‘Cameroon’ in an arenosol in Rio Grande do Norte, Brazil
Elephant grass (Cenchrus purpureus syn. Pennisetum purpureum) stands out for its high dry matter production per unit area and good nutritional value and is cultivated throughout Brazil. This study aimed to evaluate the performance of elephant grass cultivar ‘Cameroon’ fertilized with nitrogen (N) and phosphorus (P) at different rates. The experimental design was in randomized blocks with 10 treatments and 4 replicates. The treatments consisted of 5 doses of N (0, 200, 400, 600 and 800 kg N/ha) all with 66 kg P/ha and 5 doses of P (0, 22, 44, 66 and 88 kg P/ha) all with 600 kg N/ha. The variables evaluated during 3 harvests were: shoot dry matter (DM) yield, N and P concentrations in shoots, and uptakes of N and P in forage. Results showed that, in the arenosol of the experimental area, high doses of N and P could produce high yields of the grass (40‒41 t DM/ha) over 260 days. The grass extracted large amounts of N (on average, 800 kg N/ha over 260 days) and P concentrations were significantly affected by P fertilization only in the last harvest, where it increased from 0.27 to 0.78 g P/kg DM. However, application of only 200 kg N/ha will produce more than 60% of the DM yield response achieved with 800 kg N/ha. Similarly, there seems little merit in applying more than 22 kg P/ha with the N. Longer-term studies are needed to test these hypotheses along with economic assessments to determine the financial soundness of such decisions.
- Open Access
The First Optimization Process from Cultivation to Flavonoid-Rich Extract from Moringa oleifera Lam. Leaves in Brazil
Flavonoids are significant antioxidant and anti-inflammatory agents and have multiple potential health applications. Moringa oleifera is globally recognized for its nutritional and pharmacological properties, correlated to the high flavonoid content in its leaves. However, the bioactive compounds found in plants may vary according to the cultivation, origin, season, and extraction process used, making it difficult to extract reliable raw material. Hence, this study aimed to standardize the best cultivation and harvest season in Brazil and the best extraction process conditions to obtain a flavonoid-rich extract from M. oleifera as a final product. Firstly, ultrasound-assisted extraction (UAE) was optimized to reach the highest flavonoid content by three-level factorial planning and response surface methodology (RSM). The optimal cultivation condition was mineral soil fertilizer in the drought season, and the optimized extraction was with 80% ethanol and 13.4 min of extraction time. The flavonoid-rich extract was safe and significantly decreased reactive oxygen species (ROS) and nitric oxide (NO) in LPS-treated RAW 264.7 cells. Lastly, the major flavonoids characterized by HPLC-ESI-QTRAP-MS/MS were compounds derived from apigenin, quercetin, and kaempferol glycosides. The results confirmed that it was possible to standardize the flavonoid-rich extract leading to a standardized and reliable raw material extracted from M. oleifera leaves.
Open AccessThe First Optimization Process from Cultivation to Flavonoid-Rich Extract from Moringa oleifera Lam. Leaves in Brazil
Flavonoids are significant antioxidant and anti-inflammatory agents and have multiple potential health applications. Moringa oleifera is globally recognized for its nutritional and pharmacological properties, correlated to the high flavonoid content in its leaves. However, the bioactive compounds found in plants may vary according to the cultivation, origin, season, and extraction process used, making it difficult to extract reliable raw material. Hence, this study aimed to standardize the best cultivation and harvest season in Brazil and the best extraction process conditions to obtain a flavonoid-rich extract from M. oleifera as a final product. Firstly, ultrasound-assisted extraction (UAE) was optimized to reach the highest flavonoid content by three-level factorial planning and response surface methodology (RSM). The optimal cultivation condition was mineral soil fertilizer in the drought season, and the optimized extraction was with 80% ethanol and 13.4 min of extraction time. The flavonoid-rich extract was safe and significantly decreased reactive oxygen species (ROS) and nitric oxide (NO) in LPS-treated RAW 264.7 cells. Lastly, the major flavonoids characterized by HPLC-ESI-QTRAP-MS/MS were compounds derived from apigenin, quercetin, and kaempferol glycosides. The results confirmed that it was possible to standardize the flavonoid-rich extract leading to a standardized and reliable raw material extracted from M. oleifera leaves.
- Open Access
- 7 March 2022
- Published by Universidade Estadual de Maringa in Acta Scientiarum. Animal Sciences
- Vol. 44, e53792
Sward structure, morphological components and forage yield of massai grass in response to residual effect of swine biofertilizer
The present study aimed to evaluate the residual effects of the application of biofertilizer and mineral fertilizer on sward structure and morphological components of Panicum maximum cv. Massai. The experimental design comprised randomized blocks with six treatments consisting of increasing doses of swine biofertilizer (0, 10, 20, 30 and 40 Mg ha-1) and mineral fertilization (150 kg N ha-1, 33 kg P ha-1), with four replicates. The variables analyzed were pasture height, light interception, leaf area index, forage mass and morphological components. Plant height responded linearly and positively to biofertilizer levels in the three evaluations. The highest averages for light interception (51.63%) and leaf area index (1.64) were observed for the 240 days (40 Mg ha-1). Dry leaf mass was influenced by the increase in biofertilizer dose, with increments of 39.68%, 25.07% and 44.66% for the 240, 300 and 360 days, respectively, when compared to the control treatment. Mineral fertilization promoted lower mass of dead material and lower leaf area index but did not differ from biofertilizer for the other variables. The residual effect of swine biofertilizer was greater than that of mineral fertilization, with a minimum use of 20 Mg ha-1 a practical agronomic recommendation.
- 7 March 2022
- Published by Universidade Estadual de Maringa in Acta Scientiarum. Animal Sciences
- Vol. 44, e53792
Open AccessSward structure, morphological components and forage yield of massai grass in response to residual effect of swine biofertilizer
The present study aimed to evaluate the residual effects of the application of biofertilizer and mineral fertilizer on sward structure and morphological components of Panicum maximum cv. Massai. The experimental design comprised randomized blocks with six treatments consisting of increasing doses of swine biofertilizer (0, 10, 20, 30 and 40 Mg ha-1) and mineral fertilization (150 kg N ha-1, 33 kg P ha-1), with four replicates. The variables analyzed were pasture height, light interception, leaf area index, forage mass and morphological components. Plant height responded linearly and positively to biofertilizer levels in the three evaluations. The highest averages for light interception (51.63%) and leaf area index (1.64) were observed for the 240 days (40 Mg ha-1). Dry leaf mass was influenced by the increase in biofertilizer dose, with increments of 39.68%, 25.07% and 44.66% for the 240, 300 and 360 days, respectively, when compared to the control treatment. Mineral fertilization promoted lower mass of dead material and lower leaf area index but did not differ from biofertilizer for the other variables. The residual effect of swine biofertilizer was greater than that of mineral fertilization, with a minimum use of 20 Mg ha-1 a practical agronomic recommendation.
- Open Access
- 1 January 2022
- Published by FapUNIFESP (SciELO) in Ciência Rural
- Vol. 52 (10)
Liming and biochar on sorghum growth and Arenosol chemical properties in the Semiarid environment
This research evaluated the effect of liming (with and without) and biochar (with and without) on sorghum cv. BRS Ponta Negra growth and Arenosol chemical properties in the Semiarid environment. The experimental design was in randomized blocks, with treatments in a 2x2 factorial scheme, corresponding to the application or not of lime (0 and 2.5 t ha-1) and biochar (0 and 12.5 t ha-1). Biochar was produced from cashew branches. The experiment was conducted in 16 m² plots where the forage sorghum cultivar BRS Ponta Negra was cultivated. The soil chemical characteristics, the production attributes, and the structural characteristics of the sorghum cultivar studied were evaluated. There was no interaction between factors. The use of biochar increased the pH and Ca and P contents in the soil and contributed to increasing the panicle mass (2.51 t ha-1 of DM). Lime application affected the soil Ca content as the dose of 2.5 t ha-1 resulted in higher values of culm diameter (15.25 mm), panicle mass, and culm mass (2.63 and 7.50 t ha-1 of DM, respectively). Therefore, these results allowed to outline strategies for the use of limestone and biochar for forage production in semiarid environments in sandy soils. Because, these materials improve some chemical attributes of the soil and the production of forage sorghum. It is noteworthy that edophoclimatic conditions can change the response patterns observed in this research. Therefore, research in other regions is essential.
- 1 January 2022
- Published by FapUNIFESP (SciELO) in Ciência Rural
- Vol. 52 (10)
Open AccessLiming and biochar on sorghum growth and Arenosol chemical properties in the Semiarid environment
This research evaluated the effect of liming (with and without) and biochar (with and without) on sorghum cv. BRS Ponta Negra growth and Arenosol chemical properties in the Semiarid environment. The experimental design was in randomized blocks, with treatments in a 2x2 factorial scheme, corresponding to the application or not of lime (0 and 2.5 t ha-1) and biochar (0 and 12.5 t ha-1). Biochar was produced from cashew branches. The experiment was conducted in 16 m² plots where the forage sorghum cultivar BRS Ponta Negra was cultivated. The soil chemical characteristics, the production attributes, and the structural characteristics of the sorghum cultivar studied were evaluated. There was no interaction between factors. The use of biochar increased the pH and Ca and P contents in the soil and contributed to increasing the panicle mass (2.51 t ha-1 of DM). Lime application affected the soil Ca content as the dose of 2.5 t ha-1 resulted in higher values of culm diameter (15.25 mm), panicle mass, and culm mass (2.63 and 7.50 t ha-1 of DM, respectively). Therefore, these results allowed to outline strategies for the use of limestone and biochar for forage production in semiarid environments in sandy soils. Because, these materials improve some chemical attributes of the soil and the production of forage sorghum. It is noteworthy that edophoclimatic conditions can change the response patterns observed in this research. Therefore, research in other regions is essential.
- 3 April 2021
- Published by Taylor & Francis in Australian Forestry
- Vol. 84 (2) , 73-81
Efficiency of micronutrients and sodium use of a Eucalyptus clone as a function of planting density in short-rotation cropping
The objective of this study was to assess the effect of planting density on the concentration, amount per hectare and nutrient-use efficiency (NUE) of micronutrients (boron – B, copper – Cu, Fe– iron, manganese – Mn, and zinc – Zn) and sodium (Na) of a Eucalyptus grandis × Eucalyptus urophylla clone planted in a systematic experimental design in the coastal region of the state of Rio Grande do Norte, Brazil. The experimental treatments encompassed ten planting densities from 606 to 2564 trees ha-1, with three replicates per treatment. Thirty-six months after planting, the trees were harvested and the concentration (mg kg-1), amount per hectare (kg ha-1), and NUE of micronutrients and Na were evaluated for each tree component (bark, branches, leaves and wood). Regression models were fitted for bark, branches, leaves and wood as a function of growing space. Linear, quadratic, exponential and logarithmic models were fitted. The increase in planting density brought the following results: increases in the concentration of B in leaves, Mn in bark and Na in leaves and bark; decreases in the concentration of Cu in branches and wood; increases in the export of micronutrients per area; increases in the NUE of B and Cu in branches; and decreases in the NUE of Mn for wood, Zn for bark and Na for leaves and bark. There was no significant effect of planting density on the concentration of Fe and Zn. Initial planting density affected the concentration (except Fe and Zn), amount exported per hectare and NUE (except Fe) of micronutrients and Na, but the degree and trend varied according to plant part (e.g. leaves, branches) and elements under study. The harvest of wood only or wood + bark combined with the reincorporation of leaves and branches in the soil show strong potential for returning the micronutrients to the planting site, especially B and Mn.
- 3 April 2021
- Published by Taylor & Francis in Australian Forestry
- Vol. 84 (2) , 73-81
Efficiency of micronutrients and sodium use of a Eucalyptus clone as a function of planting density in short-rotation cropping
The objective of this study was to assess the effect of planting density on the concentration, amount per hectare and nutrient-use efficiency (NUE) of micronutrients (boron – B, copper – Cu, Fe– iron, manganese – Mn, and zinc – Zn) and sodium (Na) of a Eucalyptus grandis × Eucalyptus urophylla clone planted in a systematic experimental design in the coastal region of the state of Rio Grande do Norte, Brazil. The experimental treatments encompassed ten planting densities from 606 to 2564 trees ha-1, with three replicates per treatment. Thirty-six months after planting, the trees were harvested and the concentration (mg kg-1), amount per hectare (kg ha-1), and NUE of micronutrients and Na were evaluated for each tree component (bark, branches, leaves and wood). Regression models were fitted for bark, branches, leaves and wood as a function of growing space. Linear, quadratic, exponential and logarithmic models were fitted. The increase in planting density brought the following results: increases in the concentration of B in leaves, Mn in bark and Na in leaves and bark; decreases in the concentration of Cu in branches and wood; increases in the export of micronutrients per area; increases in the NUE of B and Cu in branches; and decreases in the NUE of Mn for wood, Zn for bark and Na for leaves and bark. There was no significant effect of planting density on the concentration of Fe and Zn. Initial planting density affected the concentration (except Fe and Zn), amount exported per hectare and NUE (except Fe) of micronutrients and Na, but the degree and trend varied according to plant part (e.g. leaves, branches) and elements under study. The harvest of wood only or wood + bark combined with the reincorporation of leaves and branches in the soil show strong potential for returning the micronutrients to the planting site, especially B and Mn.
- Open Access
- 23 September 2020
- Published by Revista Brasileira de Ciencias Agrarias in Revista Brasileira de Ciências Agrárias - Brazilian Journal of Agricultural Sciences
- Vol. 15 (4) , 1-7
Plywood bonding with an adhesive based on tannins from Acacia mangium Wild. bark from trees grown in Northeastern Brazil
O presente trabalho teve como objetivo avaliar a qualidade de painéis compensados colados com taninos da casca de Acacia mangium Wild., comparando o desempenho de colagem com dois adesivos comerciais. Extrato bruto da casca de A. mangium obtido com água quente foi utilizado na síntese de uma formulação adesiva. Doze painéis compensados de 5 lâminas foram produzidos, quatro painéis por adesivo. A resistência à flexão estática e o módulo de elasticidade foram determinados e também a dureza Janka. Foram obtidas a porcentagem de absorção de água após 2 e 24 horas de imersão. Com relação às propriedades mecânicas, não houve diferença estatística entre o adesivo produzido com taninos de A. mangium e os adesivos comerciais. Entretanto, tendo como base os resultados de absorção de água, os painéis colados com taninos de A. mangium são indicados para uso interno em função da sua alta absorção.
- 23 September 2020
- Published by Revista Brasileira de Ciencias Agrarias in Revista Brasileira de Ciências Agrárias - Brazilian Journal of Agricultural Sciences
- Vol. 15 (4) , 1-7
Open AccessPlywood bonding with an adhesive based on tannins from Acacia mangium Wild. bark from trees grown in Northeastern Brazil
O presente trabalho teve como objetivo avaliar a qualidade de painéis compensados colados com taninos da casca de Acacia mangium Wild., comparando o desempenho de colagem com dois adesivos comerciais. Extrato bruto da casca de A. mangium obtido com água quente foi utilizado na síntese de uma formulação adesiva. Doze painéis compensados de 5 lâminas foram produzidos, quatro painéis por adesivo. A resistência à flexão estática e o módulo de elasticidade foram determinados e também a dureza Janka. Foram obtidas a porcentagem de absorção de água após 2 e 24 horas de imersão. Com relação às propriedades mecânicas, não houve diferença estatística entre o adesivo produzido com taninos de A. mangium e os adesivos comerciais. Entretanto, tendo como base os resultados de absorção de água, os painéis colados com taninos de A. mangium são indicados para uso interno em função da sua alta absorção.
- 19 June 2020
- Published by Springer Nature in Arabian Journal of Geosciences
- Vol. 13 (13) , 1-11
Effect of biochar application on production parameters of two cowpea cultivars planted in succession in five soils from the Brazilian semiarid region
- 19 June 2020
- Published by Springer Nature in Arabian Journal of Geosciences
- Vol. 13 (13) , 1-11
Effect of biochar application on production parameters of two cowpea cultivars planted in succession in five soils from the Brazilian semiarid region