Patrick McEvoy
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Patrick McEvoy has a total of 73 co-authors. Here are the top co-authors by number of shared publications:
- Max James Ammann
Technological University Dublin
35 shared publications - Louise Keating
School of Physiotherapy, Royal College of Surgeons in Ireland, Dublin
11 shared publications J.C. Vardaxoglou
9 shared publicationsD. Gaetano
7 shared publicationsC. Brannigan
6 shared publicationsF. Horgan
6 shared publications
Latest Publications
- 1 August 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-3
Comparison of Grid Array and Microstrip Patch Array Antennas at 28 GHz
A millimeter wave Grid Array Antenna for fifth generation (5G) communications is presented. The 20 cell, nearly-rhombic, 40×40 mm 2 Grid Array Antenna structure is simulated and fabricated on a Rogers RT/Duroid 5880 substrate with thickness of 0.25 mm. The grid array has |S11|<;-10dB for two frequency ranges in the upper 26 GHz millimeter wave band and has a percentage bandwidth and gain of 5.41% and 16.5 dBi, respectively. The antenna is compared with a Microstrip Patch Array using same substrate and dimensions.
- 1 August 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-3
Comparison of Grid Array and Microstrip Patch Array Antennas at 28 GHz
A millimeter wave Grid Array Antenna for fifth generation (5G) communications is presented. The 20 cell, nearly-rhombic, 40×40 mm 2 Grid Array Antenna structure is simulated and fabricated on a Rogers RT/Duroid 5880 substrate with thickness of 0.25 mm. The grid array has |S11|<;-10dB for two frequency ranges in the upper 26 GHz millimeter wave band and has a percentage bandwidth and gain of 5.41% and 16.5 dBi, respectively. The antenna is compared with a Microstrip Patch Array using same substrate and dimensions.
- Open Access
- 1 October 2016
- Published by Institution of Engineering and Technology (IET) in IET Microwaves, Antennas & Propagation
- Vol. 10 (13) , 1390-1394
Pattern reconfigurable back‐to‐back microstrip patch antenna
A back‐to‐back microstrip patch antenna with a switchable pattern is proposed for WLAN applications. The patch elements, printed on FR‐4 substrates with a common ground plane, are switched with a single‐pole double‐throw PIN diode circuit. Switching the feed selects either of two identical radiation patterns in the opposing hemispheres for spatial diversity that would benefit a distributed network.
- 1 October 2016
- Published by Institution of Engineering and Technology (IET) in IET Microwaves, Antennas & Propagation
- Vol. 10 (13) , 1390-1394
Open AccessPattern reconfigurable back‐to‐back microstrip patch antenna
A back‐to‐back microstrip patch antenna with a switchable pattern is proposed for WLAN applications. The patch elements, printed on FR‐4 substrates with a common ground plane, are switched with a single‐pole double‐throw PIN diode circuit. Switching the feed selects either of two identical radiation patterns in the opposing hemispheres for spatial diversity that would benefit a distributed network.
- 7 June 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 16 (15361225) , 352-355
Dye-Sensitized Solar Cell Antenna
Dye-sensitized solar cells are proposed as a solar antenna in the form of a proof-of-concept dipole operating at 1.1 GHz. Comprised of glass plates in basic rectangular shapes, various material properties are considered for impact on antenna performance at three phases of assembly. Simulated and empirical analyses indicate how such low-cost solar cells can also realize viable concurrent antenna designs.
- 7 June 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 16 (15361225) , 352-355
Dye-Sensitized Solar Cell Antenna
Dye-sensitized solar cells are proposed as a solar antenna in the form of a proof-of-concept dipole operating at 1.1 GHz. Comprised of glass plates in basic rectangular shapes, various material properties are considered for impact on antenna performance at three phases of assembly. Simulated and empirical analyses indicate how such low-cost solar cells can also realize viable concurrent antenna designs.
- 16 September 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 15 (15361225) , 893-896
Amorphous Silicon Solar Vivaldi Antenna
An ultrawideband solar Vivaldi antenna is proposed. Cut from amorphous silicon cells, it maintains a peak power at 4.25 V, which overcomes a need for lossy power management components. The wireless communications device can yield solar energy or function as a rectenna for dual-source energy harvesting. The solar Vivaldi performs with 0.5-2.8 dBi gain from 0.95-2.45 GHz , and in rectenna mode, it covers three bands for wireless energy scavenging.
- 16 September 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 15 (15361225) , 893-896
Amorphous Silicon Solar Vivaldi Antenna
An ultrawideband solar Vivaldi antenna is proposed. Cut from amorphous silicon cells, it maintains a peak power at 4.25 V, which overcomes a need for lossy power management components. The wireless communications device can yield solar energy or function as a rectenna for dual-source energy harvesting. The solar Vivaldi performs with 0.5-2.8 dBi gain from 0.95-2.45 GHz , and in rectenna mode, it covers three bands for wireless energy scavenging.
- 1 September 2015
- Published by Elsevier in Gait & Posture
- Vol. 42, S70
The effect of a novel footwear telemetry antenna system on the spatiotemporal characteristics of gait in an elderly population at low risk of falling
- 1 September 2015
- Published by Elsevier in Gait & Posture
- Vol. 42, S70
The effect of a novel footwear telemetry antenna system on the spatiotemporal characteristics of gait in an elderly population at low risk of falling
- 1 September 2015
- Published by Elsevier in Gait & Posture
- Vol. 42, S74-S75
The effect of a novel footwear telemetry antenna system on the spatiotemporal characteristics of gait and running in a healthy adult population
- 1 September 2015
- Published by Elsevier in Gait & Posture
- Vol. 42, S74-S75
The effect of a novel footwear telemetry antenna system on the spatiotemporal characteristics of gait and running in a healthy adult population
- 18 May 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 63 (8) , 3354-3361
Insole Antenna for On-Body Telemetry
A 433-MHz antenna is proposed for integration with the insole of footwear for a body-area network. The folded dipole design with an asymmetric groundplane radiates from its edges and considers the close proximity of the human foot and ground surfaces. It functions for different ground conductivity conditions and an on-body communication link with an inverted-F antenna in the upper body area was evaluated on a static and dynamic human subject. The antenna solution was compliant with specific absorption rate (SAR) requirements, remains matched and links with upper body nodes regardless of the body posture and node location.
- 18 May 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 63 (8) , 3354-3361
Insole Antenna for On-Body Telemetry
A 433-MHz antenna is proposed for integration with the insole of footwear for a body-area network. The folded dipole design with an asymmetric groundplane radiates from its edges and considers the close proximity of the human foot and ground surfaces. It functions for different ground conductivity conditions and an on-body communication link with an inverted-F antenna in the upper body area was evaluated on a static and dynamic human subject. The antenna solution was compliant with specific absorption rate (SAR) requirements, remains matched and links with upper body nodes regardless of the body posture and node location.
- Open Access
- 1 April 2015
- Published by Institution of Engineering and Technology (IET) in Electronics Letters
- Vol. 51 (9) , 667-669
Circularly polarised solar antenna for airborne communication nodes
A circularly polarised solar cell antenna consisting of four sequentially rotated printed inverted‐F antennas is proposed. Four multicrystalline silicon solar cells act as the ground plane and the antenna is suitable for low‐power airborne communication nodes and wireless sensor networks. The antenna design was developed to allow 100% insolation of the cells when directly facing a light source. The low‐profile antenna minimises shadowing of the solar cell for oblique angle insolation.
- 1 April 2015
- Published by Institution of Engineering and Technology (IET) in Electronics Letters
- Vol. 51 (9) , 667-669
Open AccessCircularly polarised solar antenna for airborne communication nodes
A circularly polarised solar cell antenna consisting of four sequentially rotated printed inverted‐F antennas is proposed. Four multicrystalline silicon solar cells act as the ground plane and the antenna is suitable for low‐power airborne communication nodes and wireless sensor networks. The antenna design was developed to allow 100% insolation of the cells when directly facing a light source. The low‐profile antenna minimises shadowing of the solar cell for oblique angle insolation.
- 3 February 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 14 (15361225) , 1231-1234
Integration of Antenna Array With Multicrystalline Silicon Solar Cell
The integration of a low-profile antenna array with a multicrystalline silicon solar cell capable of powering a low-power wireless sensor at 2.45 GHz is reported. Lattice bus bars on the cell are exploited to minimize antenna shadows from low-profile antennas and transmission lines for a higher output power. The dual inverted-F array improves gain, and beam switching enables the array to sweep a wider coverage angle with larger beamwidths compared to other solar integrated antennas.
- 3 February 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 14 (15361225) , 1231-1234
Integration of Antenna Array With Multicrystalline Silicon Solar Cell
The integration of a low-profile antenna array with a multicrystalline silicon solar cell capable of powering a low-power wireless sensor at 2.45 GHz is reported. Lattice bus bars on the cell are exploited to minimize antenna shadows from low-profile antennas and transmission lines for a higher output power. The dual inverted-F array improves gain, and beam switching enables the array to sweep a wider coverage angle with larger beamwidths compared to other solar integrated antennas.