CLChenhui Lu

Chenhui Lu

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Chenhui Lu has a total of 86 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Spectrum Shaping of the Ultrabroadband Terahertz Radiation from Air Plasma Driven by Two-Color Bifilamentation

    by Zefu Liu, Xuqian Qiu, Alexander A. Romanov, Vasily A. Kostin, Alexander A. Silaev, Chenhui Lu, Yi Liu

    We report on the generation and spectral shaping of ultrabroadband terahertz-to-infrared radiation (>119 THz) from air plasma excited by a conventional tightly focused femtosecond Ti:Sa laser pulse with a duration of 35 fs assisted by its second harmonic (SH). A controllable and large frequency detuning between the SH and blueshifted component of the fundamental spectrum was achieved by utilizing spectral broadening of the fundamental pulse under filamentation and adjusting the longitudinal separation of the two cascaded filaments. For convenience, the resulting ultrabroadband emission is divided into a low-frequency part (<30 THz), an intermediate-frequency part (~50 THz), and a high-frequency part (~100 THz) that can be optimized with the filaments’ longitudinal separation. We attribute such ultrabroadband THz radiation generation to the excitation of photocurrent from the nonlinear interaction of SH with both the field at the fundamental frequency and its blueshifted component acquired during filamentation. Theoretical calculations based on time-dependent Schrödinger equation, as well as the Maxwell–Schrödinger equation for spectral broadening dynamics, reproduced the spectral features as well as the distinct dependence of the low- and high-frequency THz components.

  • Open Access

    Spectral-driven bidirectional design framework for polarization-selective structural colors

    by Tao Zhu, Ya Gao, Xi Chen, Xiaojin Chen, Jiao Geng, Liping Shi, Chenhui Lu

  • Open Access

    Analysis of Thermal Effects in Yb:YAG Laser Amplifiers with Active-Mirror Structure

    by Xiaojin Cheng, Hanguo Zhang, Jianhua Shang, Hui Bai, Chenhui Lu, Yunpeng Guo

    To address the challenge of laser beam distortion induced by thermal effects in high-power slab laser amplifiers, a coupled thermal–mechanical–optical model for a face-pumped Yb:YAG multi-pass amplifier was developed. The thermal effects under different thermal management strategies were systematically investigated using the finite element method. Firstly, the temperature distribution, thermal stress, and deformation within the Yb:YAG crystal were analyzed and compared under both room-temperature (293 K) and cryogenic (150 K) cooling conditions using a microchannel cooling structure. The results demonstrate that under a pump power of 100 W and room-temperature cooling, the peak temperature of the gain medium reaches 363 K, with a peak thermal stress of 1.04 MPa and a maximum thermal deformation of 1.44 μm. In contrast, under cryogenic cooling at 150 K, the maximum temperature is reduced to 188 K, and both thermal stress and deformation exhibit a more uniform distribution within the pumped region. Subsequently, the thermal lensing of bonded and non-bonded Yb:YAG crystals was compared and analyzed by ray-tracing. It was found that under a pump power of 100 W, the thermal focal lengths of non-bonded Yb:YAG are 1112 mm and 2559 mm at cooling temperatures of 293 K and 150 K, respectively. For bonded crystals with a 3 mm undoped YAG thickness under identical pumping and cooling conditions, the corresponding thermal focal lengths measure 1508 mm and 3044 mm. When the undoped YAG thickness increases to 6 mm, the thermal focal lengths further extend to 1789 mm and 4206 mm, respectively.


  • Open Access

    Design and Control of a Wheeled Bipedal Robot Based on Hybrid Linear Quadratic Regulator and Proportional-Derivative Control

    by Yu Xu, Zhaoqiang Wang, Chenhui Lu

    Wheeled bipedal robots (WBRS) combine the terrain adaptability potential of legged robots with the motion efficiency of wheeled robots, but the terrain adaptability is affected by the control system. Aiming at the defect that the traditional modeling ignores the dynamic changes in head angle and center of mass height, this paper proposes a method of integrated dynamic modeling and hierarchical control. The posture balance optimizes the system performance index through the linear quadratic regulator (LQR) to control the in-wheel motor, and the state feedback matrix is designed to suppress the tipping caused by external interference. At the same time, the changes in head angle and center of mass height are included in the balance control variables. The center of mass height changes are fed back through the proportional differential (PD) control and virtual model control (VMC) algorithm to control the joint motor. Simulation experiments are carried out on multiple platforms to verify that the proposed method effectively improves the control robustness of the traditional wheeled bipedal robot through geometric-dynamic coupling modeling and LQR-PD hybrid control, providing a new method of complex terrain adaptive control.


  • Spectral asymmetry effect in terahertz generation by two-color ionizing femtosecond pulses

    by Zhiwen Zhang, Vasily A. Kostin, Alexander A. Silaev, Zefu Liu, Shixiang Wang, Chenhui Lu, Zhengquan Fan, Yi Liu


  • Study on the laser ultrasonic testing mechanism of delamination defects in anisotropic curved structure carbon fiber–reinforced polymer

    by Qixin Li, Xiaojin Cheng, Xiangnan Wu, Chenhui Lu, Hanguo Zhang, Jianhua Shang

    In response to the demand for real-time non-destructive detection of delamination defects in curved structure carbon fiber–reinforced polymer (CFRP), an anisotropic CFRP model was constructed based on the laser thermal elastic effect, and the generation and propagation of ultrasonic waves inside CFPR were analyzed. On this basis, the orientation information of the delamination defect is obtained by calculating the time it takes for the ultrasonic transverse wave to reach the CFRP surface probe after encountering the delamination defect. When the delamination defect with the size of 1×0.2 mm is located between the first and second layers, the detection errors at different probe positions are 0.48% and 0.64%, respectively. Moreover, when the defect is located between the second and third layers, the detection error can also be controlled within 1%.


  • Open Access

    Polarization-switchable structural colors generated by AlN metasurfaces and the effect of different substrates

    by Jiujiang Wang, Chenhui Lu, Jiao Geng, Liping Shi

    Metasurfaces have the capability to boost the generation of distinct colors by improving the interaction between surface materials and photons. We present a straightforward and polarization-tunable aluminum nitride metasurface. This metasurface enables the display and concealment of the composition pattern and exhibits color switching by modifying the polarization state of the incident light. We further explore the impact of different substrates on metasurface performance. The results indicate that the full width at half maximum of the reflectance curves increases with the increase of the refractive index between the nanostructures and the substrate material, which leads to a broader dispersion of the structural colors in the spectrum. Moreover, the sizes of the nanostructures can be gradually reduced for the substrate with a high refractive index. These findings not only offer polarization-tunable structural color metasurfaces but also provide essential insights in selecting nanostructure and substrate materials, which will help in the design of nanostructures for such metasurfaces.


  • Enhanced inertial magnetization response driven by chirped terahertz field

    by Jiujiang Wang, Chenhui Lu, Zhiwen Zhang, Chong Hou, Shihua Chen, Yi Liu

    We explore the spin dynamics process in ferromagnets driven by chirped THz fields, utilizing the spin dynamics model derived from the inertial Landau-Lifshitz-Gilbert equation. Our findings reveal a substantial enhancement in spin dynamics intensity, ranging from 15% to 20% when the sample is subjected to a chirped THz pulse. Additionally, it is observed that chirped THz fields have the capability to shift the peak of spin dynamics, with the variation dependent on the chirping time of the THz pulse. Furthermore, the underlying physical mechanisms responsible for such spin dynamics are well explained by the Zeeman torque and the time delay of different frequencies of the chirped THz fields within the framework of the inertial Landau-Lifshitz-Gilbert equation.


  • The manipulation of polarized terahertz generation by incommensurate two-color laser pulses with circular polarization

    by Longzhen Zhuang, Ming Ni, Xi Chen, Zhaoqiang Wang, Chenhui Lu

    We theoretically investigate the polarized terahertz (THz) generation in laser–gas interaction using circularly polarized (CP) two-color laser pulses with uncommon frequencies. We show that these laser pulses can be applied to generate polarized THz radiation, and the polarization of THz radiation, which ranges from linear to circular, can be controlled in a flexible manner by manipulating the laser parameters, such as the relative phase and phase angle. Furthermore, in contrast to traditional harmonic frequency combinations, the polarization states of the incommensurate lasers undergo complex evolution with the phase angle, resulting in a noteworthy influence on the THz yield. The obtained results could deepen our understanding of polarized THz radiation generation.