XWXian-Ping Wang

Xian-Ping Wang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Xian-Ping Wang has a total of 198 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    The Microstructural Evolution and Mechanical Properties of Boron-Doped Ti35Zr30V10Nb25 Refractory High-Entropy Alloy

    by Xinggang Wang, Meng Sun, Jiaxin Liu, Xueqing Liu, Weibin Jiang, Xianping Wang, Qianfeng Fang

    The addition of oxygen or nitrogen in refractory high-entropy alloys (HEAs) has been widely reported, but studies on boron-doped HEAs have mainly focused on the segregation of boron elements at grain boundaries. The changes in the microstructure and mechanical properties in TiZrNb-based HEAs remain enigmatic. In this work, boron-doped Ti35Zr30V10Nb25 (Ti35-xB) refractory HEAs were designed to elucidate their microstructural evolution and mechanical properties. Unlike oxygen and nitrogen, trace amounts of boron addition result in the formation of borides, and boron exhibits a strong repulsion towards Zr, leading to Zr-depleted borides. Borides distributed along the grain boundaries refine the grain size and dendritic structure. The borides and structural refinement effect enhance the strain-hardening capacity and uniform elongation, resulting in an over 15% uniform elongation for Ti35-0.25B.


  • Open Access

    R-Phase Transformation Evolution in NiTi SMA Wires Studied via the Internal Friction Technique

    by Yuhao Xu, Junlan Chen, Xinggang Wang, Meng Sun, Xianping Wang, Weibin Jiang

    The specific damping capacity variation of heat-treated NiTi was observed during a pseudoelasticity test. The detailed B2 → R-phase transformation process in cold-drawn NiTi wires undergoing middle-temperature aging was studied via X-ray diffraction, transmission electron microscope, and internal friction technique. Results show that, as aging time increased at 450 °C, the dynamic phase transition splitting from B2 → R to B2 → R1 and B2 → R2 became evident. However, such a splitting process was not observed for the sample after aging at 400 °C. The reason for R-phase generation is attributed to non-uniformly distributed stress fields. The splitting of the internal friction peak, in conjunction with high-resolution transmission electron microscope and mechanic results, suggests a substantial occurrence of short-range segregation of Ni atoms in the B2-NiTi matrix. Furthermore, the specific damping capacity (SDC) exhibits a gradual increase with prolonged annealing time. Specifically, the sample with significant dynamic phase transition splitting reaches an SDC value of 0.60.


  • Open Access

    Vibration Damping and Noise Reduction of a New Non-Newtonian Fluid Damper in a Washing Machine

    by Yuanjin Song, Zhong Zhuang, Xianping Wang, Qianfeng Fang, Zhijun Cheng, Tao Zhang

    Due to friction vibration dampers’ inability to effectively dampen low loads during high-frequency dewatering, drum washing machines vibrated intensively. In order to address this problem, in this paper, a novel type of low-cost non-Newtonian fluid damper is proposed and investigated based on the non-Newtonian fluid shear thinning properties’ effect on vibration suppression during the high-frequency dewatering process of the washing machine. In contrast to other commonly used dampers, the homemade non-Newtonian fluid damper significantly suppresses the growth trend of the apparent elastic coefficient at high frequencies. A systematic investigation of damper structural parameters reveals that smaller gap height, higher piston head number, and more viscous fluid viscosity are adequate for vibration suppression and noise reduction. These results demonstrate that the non-Newtonian fluid damper can produce an excellent vibration-damping effect for the entire washing process of the washing machine, especially for the high-frequency dewatering process. The acceleration attenuation ratio can reach up to 83.49%, the energy attenuation is up to 98.44%, and the noise reduction is up to 10.38 dB.


  • Open Access

    Microstructure Characterization and Hardening Evaluation of Ferrite/Martensitic Steels Induced by He2+ Irradiation

    by Guangjie Zhang, Junfeng Yang, Zhuoming Xie, Linchao Zhang, Rui Liu, Meng Sun, Gang Li, Hui Wang, Yi Hu, Xuebang Wu, et al.

    Two ferrite/martensitic (F/M) steels with different Si concentrations (0 and 0.4 wt.%) were irradiated by 250 keV He2+ ions with different fluences of 2 × 1016 ions/cm2 and 1 × 1017 ions/cm2. Transmission electron microscopy and a nanoindenter were employed to investigate their microstructure evolution and irradiation hardening effects induced by high-energy He2+ ions. A large number of He bubbles formed in the Si-free and Si-containing F/M steels, which preferentially nucleated and grew at the lath and phase boundaries. Owing to the inhibiting effect of Si addition on He bubble growth, the He bubbles in the Si-containing sample exhibited smaller size and higher density at the same He2+ fluence. Nanoindenter measurement revealed that typical irradiation hardening was observed in the F/M steel, and 1/2 and type dislocation loops formed by He2+ irradiation was recognized as the dominant mechanism. The addition of Si induced an increase in the number density of dislocation loops, leading to the exacerbation of the irradiation hardening, and the results are basically in agreement with the theoretical analysis based on the dispersion barrier hardening (DBH) and Friedel–Kroupa–Hirsch (FKH) models.


  • Open Access

    Study on the Automatic Identification of ABX3 Perovskite Crystal Structure Based on the Bond-Valence Vector Sum

    by Laisheng Zhang, Zhong Zhuang, Qianfeng Fang, Xianping Wang

    Perovskite materials have a variety of crystal structures, and the properties of crystalline materials are greatly influenced by geometric information such as the space group, crystal system, and lattice constant. It used to be mostly obtained using calculations based on density functional theory (DFT) and experimental data from X-ray diffraction (XRD) curve fitting. These two techniques cannot be utilized to identify materials on a wide scale in businesses since they require expensive equipment and take a lot of time. Machine learning (ML), which is based on big data statistics and nonlinear modeling, has advanced significantly in recent years and is now capable of swiftly and reliably predicting the structures of materials with known chemical ratios based on a few key material-specific factors. A dataset encompassing 1647 perovskite compounds in seven crystal systems was obtained from the Materials Project database for this study, which used the ABX3 perovskite system as its research object. A descriptor called the bond-valence vector sum (BVVS) is presented to describe the intricate geometry of perovskites in addition to information on the usual chemical composition of the elements. Additionally, a model for the automatic identification of perovskite structures was built through a comparison of various ML techniques. It is possible to identify the space group and crystal system using just a small dataset of 10 feature descriptors. The highest accuracy is 0.955 and 0.974, and the highest correlation coefficient (R2) value of the lattice constant can reach 0.887, making this a quick and efficient method for determining the crystal structure.


  • Open Access

    Strain Profile in the Subsurface of He-Ion-Irradiated Tungsten Accessed by S-GIXRD

    by Wenjie Huang, Meng Sun, Wen Wen, Junfeng Yang, Zhuoming Xie, Rui Liu, Xianping Wang, Xuebang Wu, Qianfeng Fang, Changsong Liu

    The strain profile in the subsurface of He-ion-irradiated W was figured out by unfolding the synchrotron-grazing incidence X-ray diffraction (S-GIXRD) patterns at different incidence angles. The results show that for 2 × 1021 ions/m2 He2+-irradiated W, in addition to a compressive strain exists in the depths of 0–100 nm due to mechanical polishing, an expansion strain appears in the depth beyond 100 nm owing to irradiation-induced lattice swelling. This work provides a reference for the study of irradiation damage in the subsurface by S-GIXRD.


  • Open Access

    Development of Y2O3 Dispersion-Strengthened Copper Alloy by Sol-Gel Method

    by Jiangang Ke, Zhuoming Xie, Rui Liu, Ke Jing, Xiang Cheng, Hui Wang, Xianping Wang, Xuebang Wu, Qianfeng Fang, Changsong Liu

    In this study, oxide dispersion-strengthened Cu alloy with a Y2O3 content of 1 wt.% was fabricated through citric acid sol-gel synthesis and spark plasma sintering (SPS). The citric acid sol-gel method provides molecular mixing for the preparation of precursor powders, which produces nanoscale and uniformly distributed Y2O3 particles in an ultrafine-grained Cu matrix. The effects of nanoscale Y2O3 particles on the microstructure, mechanical properties and thermal conductivity of the Cu-1wt.%Y2O3 alloy were investigated. The average grain size of the Cu-1wt.%Y2O3 alloy is 0.42 μm, while the average particle size of Y2O3 is 16.4 nm. The unique microstructure provides excellent mechanical properties with a tensile strength of 572 MPa and a total elongation of 6.4%. After annealing at 800 °C for 1 h, the strength of the alloy does not decrease obviously, showing excellent thermal stability. The thermal conductivity of Cu-1wt.%Y2O3 alloy is about 308 Wm−1K−1 at room temperature and it decreases with increasing temperature. The refined grain size, high strength and excellent thermal stability of Cu-1wt.%Y2O3 alloys can be ascribed to the pinning effects of nanoscale Y2O3 particles dispersed in the Cu matrix. The Cu-Y2O3 alloys with high strength and high thermal conductivity have potential applications in high thermal load components of fusion reactors.


  • Open Access

    Microstructures and Tensile Properties of 9Cr-F/M Steel at Elevated Temperatures

    by Guangjie Zhang, Qinggang Zhang, Junfeng Yang, Zhuoming Xie, Linchao Zhang, Rui Liu, Gang Li, Hui Wang, Qianfeng Fang, Xianping Wang

    Tensile properties and microstructure changes under different stress states of tempered 9Cr-F/M steel were characterized using a transmission electron microscope (TEM), electron backscatter diffraction (EBSD), scanning electron microscopy (SEM), Vickers hardness tester, and tensile tester. This tempered steel has a typical lath martensite structure with only a few polygonal ferrites embedded, and M23C6 and MX phases nucleated on the lath boundaries or within the sub-grains. At elevated temperatures, the strength of the steel decreases. However, the elongation at 400 °C is lower than that at room temperature. For the necking zone, tensile deformation made the grain elongated to the direction of applied stress and thus the grain’s cross-section becomes smaller. For samples with rectangular working area cross-section, the deformation in the TD direction was more severe than that in the ND direction, which made the grain elongated in the TD direction. These results can provide some guidance for composition optimization of the 9Cr-F/M steel and facilitate a better understanding of the fracture mechanism under different stress states.


  • Open Access

    Li2ZrO3-Coated Monocrystalline LiAl0.06Mn1.94O4 Particles as Cathode Materials for Lithium-Ion Batteries

    by Chunliu Li, Banglei Zhao, Junfeng Yang, Linchao Zhang, Qianfeng Fang, Xianping Wang

    Li2ZrO3-coated and Al-doped micro-sized monocrystalline LiMn2O4 powder is synthesized through solid-state reaction, and the electrochemical performance is investigated as cathode materials for lithium-ion batteries. It is found that Li2ZrO3-coated LiAl0.06Mn1.94O4 delivers a discharge capacity of 110.90 mAhg−1 with 94% capacity retention after 200 cycles at room temperature and a discharge capacity of 104.4 mAhg−1 with a capacity retention of 87.8% after 100 cycles at 55 °C. Moreover, Li2ZrO3-coated LiAl0.06Mn1.94O4 could retain 87.5% of its initial capacity at 5C rate. This superior cycling and rate performance can be greatly contributed to the synergistic effect of Al-doping and Li2ZrO3-coating.


  • Open Access

    Effect of Nano-Y2O3 Content on Microstructure and Mechanical Properties of Fe18Cr Films Fabricated by RF Magnetron Sputtering

    by Bang-Lei Zhao, Le Wang, Li-Feng Zhang, Jian-Gang Ke, Zhuo-Ming Xie, Jun-Feng Yang, Xian-Ping Wang, Ting Hao, Chang-Song Liu, Xue-Bang Wu

    In this work, FeCr-based films with different Y2O3 contents were fabricated using radio frequency (RF) magnetron sputtering. The effects of Y2O3 content on their microstructure and mechanical properties were investigated through scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), inductive coupled plasma emission spectrometer (ICP) and a nanoindenter. It was found that the Y2O3-doped FeCr films exhibited a nanocomposite structure with nanosized Y2O3 particles uniformly distributed into a FeCr matrix. With the increase of Y2O3 content from 0 to 1.97 wt.%, the average grain size of the FeCr films decreased from 12.65 nm to 7.34 nm, demonstrating a grain refining effect of Y2O3. Furthermore, the hardness of the Y2O3-doped FeCr films showed an increasing trend with Y2O3 concentration, owing to the synergetic effect of dispersion strengthening and grain refinement strengthening. This work provides a beneficial guidance on the development and research of composite materials of nanocrystalline metal with a rare earth oxide dispersion phase.