Matti Jantunen
Research Subjects
Matti Jantunen has a total of 279 co-authors. Here are the top co-authors by number of shared publications:
- Otto Hänninen
Finnish Institute for Health and Welfare, Environmental Epidemiology, Environmental Health, Health Security
21 shared publications - Nino Künzli
Swiss Tropical and Public Health Institute, Allschwil, Switzerland
9 shared publications - Paolo Carrer
Department of Biomedical and Clinical Sciences “L. Sacco”, University of Milan, 20157 Milan, Italy
5 shared publications Anu Kousa
Environmental Office , Metropolitan Area Council , Helsinki , Finland
4 shared publications- Erik Lebret
National Institute for Public Health and the Environment (RIVM), Bilthoven, the Netherlands; Institute for Risk Assessment Sciences (IRAS), Utrecht University, Utrecht, the Netherlands
4 shared publications Lucy Oglesby
4 shared publications
Latest Publications
- Open Access
- 20 August 2022
- Published by Elsevier in Environment International
- Vol. 169, 107470
Pandemic management requires exposure science
- 20 August 2022
- Published by Elsevier in Environment International
- Vol. 169, 107470
Open AccessPandemic management requires exposure science
- 24 April 2020
- Published by Springer Nature
- p. C1
Correction to: General Aspects of Exposure Evaluation
- Open Access
- 1 June 2017
- Published by Elsevier in Preventive Medicine Reports
- Vol. 6, 265-270
City scale climate change policies: Do they matter for wellbeing?
- 1 June 2017
- Published by Elsevier in Preventive Medicine Reports
- Vol. 6, 265-270
Open AccessCity scale climate change policies: Do they matter for wellbeing?
- 1 January 2017
- Published by Elsevier in Environment International
- Vol. 98, 75-81
Spatial and temporal trends in the mortality burden of air pollution in China: 2004–2012
- 1 January 2017
- Published by Elsevier in Environment International
- Vol. 98, 75-81
Spatial and temporal trends in the mortality burden of air pollution in China: 2004–2012
- Open Access
- 8 March 2016
- Published by Springer Nature in Environmental Health
- Vol. 15 (S1) , 5-21
Public health impacts of city policies to reduce climate change: findings from the URGENCHE EU-China project
Climate change is a global threat to health and wellbeing. Here we provide findings of an international research project investigating the health and wellbeing impacts of policies to reduce greenhouse gas emissions in urban environments. Five European and two Chinese city authorities and partner academic organisations formed the project consortium. The methodology involved modelling the impact of adopted urban climate-change mitigation transport, buildings and energy policy scenarios, usually for the year 2020 and comparing them with business as usual (BAU) scenarios (where policies had not been adopted). Carbon dioxide emissions, health impacting exposures (air pollution, noise and physical activity), health (cardiovascular, respiratory, cancer and leukaemia) and wellbeing (including noise related wellbeing, overall wellbeing, economic wellbeing and inequalities) were modelled. The scenarios were developed from corresponding known levels in 2010 and pre-existing exposure response functions. Additionally there were literature reviews, three longitudinal observational studies and two cross sectional surveys. There are four key findings. Firstly introduction of electric cars may confer some small health benefits but it would be unwise for a city to invest in electric vehicles unless their power generation fuel mix generates fewer emissions than petrol and diesel. Second, adopting policies to reduce private car use may have benefits for carbon dioxide reduction and positive health impacts through reduced noise and increased physical activity. Third, the benefits of carbon dioxide reduction from increasing housing efficiency are likely to be minor and co-benefits for health and wellbeing are dependent on good air exchange. Fourthly, although heating dwellings by in-home biomass burning may reduce carbon dioxide emissions, consequences for health and wellbeing were negative with the technology in use in the cities studied. The climate-change reduction policies reduced CO2 emissions (the most common greenhouse gas) from cities but impact on global emissions of CO2 would be more limited due to some displacement of emissions. The health and wellbeing impacts varied and were often limited reflecting existing relatively high quality of life and environmental standards in most of the participating cities; the greatest potential for future health benefit occurs in less developed or developing countries.
- 8 March 2016
- Published by Springer Nature in Environmental Health
- Vol. 15 (S1) , 5-21
Open AccessPublic health impacts of city policies to reduce climate change: findings from the URGENCHE EU-China project
Climate change is a global threat to health and wellbeing. Here we provide findings of an international research project investigating the health and wellbeing impacts of policies to reduce greenhouse gas emissions in urban environments. Five European and two Chinese city authorities and partner academic organisations formed the project consortium. The methodology involved modelling the impact of adopted urban climate-change mitigation transport, buildings and energy policy scenarios, usually for the year 2020 and comparing them with business as usual (BAU) scenarios (where policies had not been adopted). Carbon dioxide emissions, health impacting exposures (air pollution, noise and physical activity), health (cardiovascular, respiratory, cancer and leukaemia) and wellbeing (including noise related wellbeing, overall wellbeing, economic wellbeing and inequalities) were modelled. The scenarios were developed from corresponding known levels in 2010 and pre-existing exposure response functions. Additionally there were literature reviews, three longitudinal observational studies and two cross sectional surveys. There are four key findings. Firstly introduction of electric cars may confer some small health benefits but it would be unwise for a city to invest in electric vehicles unless their power generation fuel mix generates fewer emissions than petrol and diesel. Second, adopting policies to reduce private car use may have benefits for carbon dioxide reduction and positive health impacts through reduced noise and increased physical activity. Third, the benefits of carbon dioxide reduction from increasing housing efficiency are likely to be minor and co-benefits for health and wellbeing are dependent on good air exchange. Fourthly, although heating dwellings by in-home biomass burning may reduce carbon dioxide emissions, consequences for health and wellbeing were negative with the technology in use in the cities studied. The climate-change reduction policies reduced CO2 emissions (the most common greenhouse gas) from cities but impact on global emissions of CO2 would be more limited due to some displacement of emissions. The health and wellbeing impacts varied and were often limited reflecting existing relatively high quality of life and environmental standards in most of the participating cities; the greatest potential for future health benefit occurs in less developed or developing countries.
- Open Access
- 14 December 2015
- Published by Springer Nature in Environmental Health
- Vol. 14 (1) , 1-13
Building-related health impacts in European and Chinese cities: a scalable assessment method
- 14 December 2015
- Published by Springer Nature in Environmental Health
- Vol. 14 (1) , 1-13
Open AccessBuilding-related health impacts in European and Chinese cities: a scalable assessment method
- 14 December 2015
- Published by Wiley in Indoor Air
- Vol. 26 (6) , 836-856
Indoor inhalation intake fractions of fine particulate matter: review of influencing factors
Exposure to fine particulate matter (PM2.5) is a major contributor to the global human disease burden. The indoor environment is of particular importance when considering the health effects associated with PM2.5 exposures because people spend the majority of their time indoors and PM2.5 exposures per unit mass emitted indoors are two to three orders of magnitude larger than exposures to outdoor emissions. Variability in indoor PM2.5 intake fraction (iFin,total), which is defined as the integrated cumulative intake of PM2.5 per unit of emission, is driven by a combination of building-specific, human-specific, and pollutant-specific factors. Due to a limited availability of data characterizing these factors, however, indoor emissions and intake of PM2.5 are not commonly considered when evaluating the environmental performance of product life cycles. With the aim of addressing this barrier, a literature review was conducted and data characterizing factors influencing iFin,total were compiled. In addition to providing data for the calculation of iFin,total in various indoor environments and for a range geographic regions, this paper discusses remaining limitations to the incorporation of PM2.5-derived health impacts into life cycle assessments and makes recommendations regarding future research.
- 14 December 2015
- Published by Wiley in Indoor Air
- Vol. 26 (6) , 836-856
Indoor inhalation intake fractions of fine particulate matter: review of influencing factors
Exposure to fine particulate matter (PM2.5) is a major contributor to the global human disease burden. The indoor environment is of particular importance when considering the health effects associated with PM2.5 exposures because people spend the majority of their time indoors and PM2.5 exposures per unit mass emitted indoors are two to three orders of magnitude larger than exposures to outdoor emissions. Variability in indoor PM2.5 intake fraction (iFin,total), which is defined as the integrated cumulative intake of PM2.5 per unit of emission, is driven by a combination of building-specific, human-specific, and pollutant-specific factors. Due to a limited availability of data characterizing these factors, however, indoor emissions and intake of PM2.5 are not commonly considered when evaluating the environmental performance of product life cycles. With the aim of addressing this barrier, a literature review was conducted and data characterizing factors influencing iFin,total were compiled. In addition to providing data for the calculation of iFin,total in various indoor environments and for a range geographic regions, this paper discusses remaining limitations to the incorporation of PM2.5-derived health impacts into life cycle assessments and makes recommendations regarding future research.
- 26 May 2014
- Published by SAGE Publications in Indoor and Built Environment
- Vol. 24 (8) , 1110-1146
Integrated exposure for risk assessment in indoor environments based on a review of concentration data on airborne chemical pollutants in domestic environments in Europe
This review set out to identify data sets for airborne chemical pollutants measured in domestic dwellings within European Union (EU) countries from the literature published during 1995–2010. A total of 74 papers satisfied inclusion criteria, and from those papers data on country location, population sampled, sampling period, number of samples and summary statistics of concentrations measured were gathered. The chemical substances identified and included were grouped to aldehydes, radon, carbon dioxide (CO2), carbon monoxide (CO), nicotine, nitrogen dioxide (NO2), polycyclic aromatic hydrocarbons, volatile organic compounds and brominated flame retardants. The review showed that the availability of data between the EU countries is varying and more measured data are available for countries in northern Europe than in the southern parts. This review is part of the Integrated Exposure for Risk Assessment in Indoor Environments project which developed a full-chain modelling platform, incorporating tools and databases for indoor chemical source release, exposure and risk assessment with the ultimate aim of estimating the health impact of chemical exposures in the indoor environment.
- 26 May 2014
- Published by SAGE Publications in Indoor and Built Environment
- Vol. 24 (8) , 1110-1146
Integrated exposure for risk assessment in indoor environments based on a review of concentration data on airborne chemical pollutants in domestic environments in Europe
This review set out to identify data sets for airborne chemical pollutants measured in domestic dwellings within European Union (EU) countries from the literature published during 1995–2010. A total of 74 papers satisfied inclusion criteria, and from those papers data on country location, population sampled, sampling period, number of samples and summary statistics of concentrations measured were gathered. The chemical substances identified and included were grouped to aldehydes, radon, carbon dioxide (CO2), carbon monoxide (CO), nicotine, nitrogen dioxide (NO2), polycyclic aromatic hydrocarbons, volatile organic compounds and brominated flame retardants. The review showed that the availability of data between the EU countries is varying and more measured data are available for countries in northern Europe than in the southern parts. This review is part of the Integrated Exposure for Risk Assessment in Indoor Environments project which developed a full-chain modelling platform, incorporating tools and databases for indoor chemical source release, exposure and risk assessment with the ultimate aim of estimating the health impact of chemical exposures in the indoor environment.
- 1 May 2014
- Published by Elsevier in Science of The Total Environment
- Vol. 479-480, 267-276
Application of the maximum cumulative ratio (MCR) as a screening tool for the evaluation of mixtures in residential indoor air
- 1 May 2014
- Published by Elsevier in Science of The Total Environment
- Vol. 479-480, 267-276
Application of the maximum cumulative ratio (MCR) as a screening tool for the evaluation of mixtures in residential indoor air
- Top Cited PapersOpen Access
- 1 May 2014
- Published by American Chemical Society (ACS) in Environmental Health Perspectives
- Vol. 122 (5) , 439-446
Environmental Burden of Disease in Europe: Assessing Nine Risk Factors in Six Countries
Background: Environmental health effects vary considerably with regard to their severity, type of disease, and duration. Integrated measures of population health, such as environmental burden of disease (EBD), are useful for setting priorities in environmental health policies and research. This review is a summary of the full Environmental Burden of Disease in European countries (EBoDE) project report. Objectives: The EBoDE project was set up to provide assessments for nine environmental risk factors relevant in selected European countries (Belgium, Finland, France, Germany, Italy, and the Netherlands). Methods: Disability-adjusted life years (DALYs) were estimated for benzene, dioxins, secondhand smoke, formaldehyde, lead, traffic noise, ozone, particulate matter (PM2.5), and radon, using primarily World Health Organization data on burden of disease, (inter)national exposure data, and epidemiological or toxicological risk estimates. Results are presented here without discounting or age-weighting. Results: About 3–7% of the annual burden of disease in the participating countries is associated with the included environmental risk factors. Airborne particulate matter (diameter ≤ 2.5 μm; PM2.5) is the leading risk factor associated with 6,000–10,000 DALYs/year and 1 million people. Secondhand smoke, traffic noise (including road, rail, and air traffic noise), and radon had overlapping estimate ranges (600–1,200 DALYs/million people). Some of the EBD estimates, especially for dioxins and formaldehyde, contain substantial uncertainties that could be only partly quantified. However, overall ranking of the estimates seems relatively robust. Conclusions: With current methods and data, environmental burden of disease estimates support meaningful policy evaluation and resource allocation, including identification of susceptible groups and targets for efficient exposure reduction. International exposure monitoring standards would enhance data quality and improve comparability. Citation: Hänninen O, Knol AB, Jantunen M, Lim TA, Conrad A, Rappolder M, Carrer P, Fanetti AC, Kim R, Buekers J, Torfs R, Iavarone I, Classen T, Hornberg C, Mekel OC, EBoDE Working Group. 2014. Environmental burden of disease in Europe: assessing nine risk factors in six countries. Environ Health Perspect 122:439–446; http://dx.doi.org/10.1289/ehp.1206154
- 1 May 2014
- Published by American Chemical Society (ACS) in Environmental Health Perspectives
- Vol. 122 (5) , 439-446
Top Cited PapersOpen AccessEnvironmental Burden of Disease in Europe: Assessing Nine Risk Factors in Six Countries
Background: Environmental health effects vary considerably with regard to their severity, type of disease, and duration. Integrated measures of population health, such as environmental burden of disease (EBD), are useful for setting priorities in environmental health policies and research. This review is a summary of the full Environmental Burden of Disease in European countries (EBoDE) project report. Objectives: The EBoDE project was set up to provide assessments for nine environmental risk factors relevant in selected European countries (Belgium, Finland, France, Germany, Italy, and the Netherlands). Methods: Disability-adjusted life years (DALYs) were estimated for benzene, dioxins, secondhand smoke, formaldehyde, lead, traffic noise, ozone, particulate matter (PM2.5), and radon, using primarily World Health Organization data on burden of disease, (inter)national exposure data, and epidemiological or toxicological risk estimates. Results are presented here without discounting or age-weighting. Results: About 3–7% of the annual burden of disease in the participating countries is associated with the included environmental risk factors. Airborne particulate matter (diameter ≤ 2.5 μm; PM2.5) is the leading risk factor associated with 6,000–10,000 DALYs/year and 1 million people. Secondhand smoke, traffic noise (including road, rail, and air traffic noise), and radon had overlapping estimate ranges (600–1,200 DALYs/million people). Some of the EBD estimates, especially for dioxins and formaldehyde, contain substantial uncertainties that could be only partly quantified. However, overall ranking of the estimates seems relatively robust. Conclusions: With current methods and data, environmental burden of disease estimates support meaningful policy evaluation and resource allocation, including identification of susceptible groups and targets for efficient exposure reduction. International exposure monitoring standards would enhance data quality and improve comparability. Citation: Hänninen O, Knol AB, Jantunen M, Lim TA, Conrad A, Rappolder M, Carrer P, Fanetti AC, Kim R, Buekers J, Torfs R, Iavarone I, Classen T, Hornberg C, Mekel OC, EBoDE Working Group. 2014. Environmental burden of disease in Europe: assessing nine risk factors in six countries. Environ Health Perspect 122:439–446; http://dx.doi.org/10.1289/ehp.1206154