KZKunpeng Zhao

Kunpeng Zhao

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Kunpeng Zhao has a total of 173 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Designing 3D oxygen–diffusion scaffolds for high-performance metal fuels

    by Shan Feng, Hexige Wuliji, Ruifeng Liu, Xinba Yaer, Xiaoping Niu, Jun Wang, Kunpeng Zhao, Hexi Baoyin

    Metal fuels are central to energetic materials because of their high energy density and intense heat-release capability. However, early-stage formation of passivating oxide shells severely restricts oxygen diffusion, resulting in incomplete oxidation and limited energy utilization. Here, we report a Ce-assisted microstructure design strategy to overcome this long-standing diffusion barrier by constructing three-dimensional oxygen-diffusion scaffolds within aluminum-based fuels through trace cerium addition. Rapidly solidified Al– x Ce powders develop an interconnected Al 11 Ce 3 network, which subdivides the Al matrix into fine domains. During heating and combustion, this Al 11 Ce 3 network is preferentially oxidized into a CeO 2- x /CeO 2 -containing scaffold before extensive Al oxidation, thereby providing continuous oxygen-transport pathways into the particle interior. As a result, Al– x Ce alloy powders exhibit shorter ignition delay, faster flame propagation, shorter combustion duration, and more complete oxidation than pure Al. This work establishes a general and scalable design principle for enhancing metal-fuel combustion through rare-earth-enabled oxygen-diffusion networks.

  • 1D Plasticity in Semiconductor Crystals

    by Yifei Liu, Zhiqiang Gao, Junnan Jiang, Yupeng Ma, Hengyang Feng, Xudong Bai, Pan Liu, Kunpeng Zhao, Wenpei Gao, Xun Shi, et al.

    The exceptional plasticity recently found in inorganic semiconductors can be classified into two types: the three‐dimensional (3D) orientation‐insensitive deformability in polycrystals, and the two‐dimensional (2D) anisotropic case in layered crystals. It is thus highly anticipated that one‐dimensional (1D) plasticity should also exist but it has not been found yet. Here this work reports the excellent 1D plasticity in tin selenide (SnSe) semiconductor crystals. In in‐plane directions, the bending strain is as large as ∼22.7% for the zig‐zag‐aligned specimen (plasticity) while as small as ∼1.4% for the armchair‐aligned one (brittleness). Such 1D plasticity is ascribed to the coherent and stronger bond topology along b ‐axis that allows for multiple deformation mechanisms including layer segments, interlayer slip, bridging, lattice distortion, and dislocations. This bonding topology enables that the 1D plasticity is also observed in isostructural SnS and GeSe crystals. High‐performance shape‐conformable thermoelectric generators are then successfully developed using materials with 1D plasticity. This work enriches the diagram for plasticity and thus provides a new direction for the design and discovery of ductile semiconductors.

  • Open Access

    Synergistic Grain Boundary and Phonon Engineering Enables Ultrahigh Thermoelectric Performance in Mg 3 (Sb, Bi) 2 ‐Based Materials

    by Jingdan Lei, Kai Xu, Kunpeng Zhao, Junzhuo Zhou, Haotian Gao, Yifan Yuan, Tian‐Ran Wei, Min Zhu, Qihao Zhang, Franck Gascoin, et al.

    Thermoelectric Mg 3 (Sb, Bi) 2 has emerged as a rising star in virtue of its promising thermoelectric performance and abundant constituent elements. However, its practical application is hindered by challenges in synthesis and the strong coupling between electrical and thermal transport properties. Herein, we propose a dual‐pronged strategy that combines grain boundary engineering and phonon engineering to decouple electron and phonon transport in Mg 3 (Sb, Bi) 2 . By employing a tantalum‐tube encapsulated melting technique together with Cu doping, the grain size is markedly increased to ∼25 µm, effectively suppressing carrier grain boundary scattering and enabling single‐crystal‐like electrical transport with a high carrier mobility exceeding 200 cm 2 V −1 s −1 . Meanwhile, atomic‐scale alloy disorder and nanoscale Mg 2 Cu precipitates introduce strong phonon scattering, leading to an ultralow lattice thermal conductivity of 0.36 W m −1 K −1 . Eventually, a peak zT of 1.9 at 750 K and a high conversion efficiency of 10.6% at ΔT = 488 K are achieved, demonstrating the competitive performance of these materials and devices. This study not only provides new insights into the manipulation of grain boundary scattering, but also demonstrates the great promise of Mg 3 (Sb, Bi) 2 for waste‐heat harvesting.

  • Open Access

    Multifaceted Roles of Tantalum in Promoting the Thermoelectric Performance of Mg 3 (Sb,Bi) 2 Based Materials

    by Guangmeng You, Jingdan Lei, Kai Xu, Yuntian Fu, Xueke Gu, Chengxiao Peng, Zhen Wang, Jing Chen, Kunpeng Zhao, Chao Wang

    Mg 3 (Sb,Bi) 2 has emerged as one of the most promising thermoelectric materials with the potential to complement commercial bismuth telluride. However, its performance is still hindered by pronounced carrier grain‐boundary scattering, relatively high lattice thermal conductivity, and poor chemical stability. In this work, we reveal the multifaceted role of Ta in enhancing the thermoelectric performance of Mg 3 (Sb,Bi) 2 ‐based materials. The incorporation of Ta not only increases carrier concentration through the donor effect, but also boosts carrier mobility by promoting grain growth and reducing the potential barrier. Meanwhile, Ta point defects together with metallic Ta precipitates induce strong phonon scattering, leading to a substantial reduction in lattice thermal conductivity. These synergistic effects yield outstanding TE performance, with a remarkably high zT plateau of 1.8 between 573 and 723 K, surpassing the performance of most previously reported Mg 3 (Sb,Bi) 2 systems. Moreover, a TE module constructed by both p‐type and n‐type Zintl phases achieves a high conversion efficiency of 9.6% at ΔT of 460 K. This work takes an important step toward the practical application of Mg 3 Sb 2 ‐based TE materials and devices.


  • Structural Disorder Engineered Thermoelectric Materials

    by Kunpeng Zhao, Matthias T. Agne, Tian-Ran Wei, G. Jeffrey Snyder, Xun Shi

    The strategic application of structural disorder engineering in materials science, particularly in thermoelectrics, has been widely recognized for its pivotal role in optimizing both phonon and electron transport properties. A broad range of structural disorder types has been explored, including alloying/doping-induced substitutional disorder, amorphous disorder in noncrystalline systems, critical disorder during phase transitions, ionic dynamic disorder in liquid-like phases, crystal-amorphicity duality in hybrid structures, turbostratic disorder in layered compounds, and spin disorder in magnetic materials. However, these diverse forms of structural disorder are often not clearly distinguished or systematically analyzed in terms of their unique impacts on thermoelectric transport. In this review, we provide a comprehensive classification and analysis of various disorder types, detailing their structural characteristics, formation mechanisms, and specific effects on electron and phonon transport. Each structural disorder is illustrated through carefully selected case studies. In the end, we outline the current challenges and future directions in disorder engineering for thermoelectrics. Overall, this review aims to advance the fundamental understanding of disorder effects and highlight their crucial significance for optimizing thermoelectric parameters.


  • Open Access

    Nanoscale coherent chemical fluctuations driving superior thermoelectric performance in vacancy-tailored ductile AgCu(S,Se,Te)

    by Yuxiang Zhan, Kunpeng Zhao, Hexige Wuliji, Yifan Yuan, Xiang Liu, Tian-Ran Wei, Ting Zhang, Min Zhu, Xun Shi

    (Ag,Cu) 2 (S,Se,Te) alloys, as rare examples of p-type inorganic ductile semiconductors, have emerged as promising candidates for wearable electronics because of their mechanical flexibility and favorable processability. However, the multicomponent nature of this system introduces diverse microstructures and intricate defect landscapes that complicate the optimization of thermoelectric performance. Here, we reveal the presence of compositionally inhomogeneous yet structurally coherent nanoscale chemical fluctuations within this alloy system. These fluctuations, together with abundant dislocations and twin boundaries, serve as efficient phonon scattering centers to suppress the lattice thermal conductivity to approach glass-like levels. Concurrently, tuning the cation ratios and vacancies allows for precise control over the carrier concentration and thereby leads to enhanced power factors. Last, a peak zT of 0.98 at 360 kelvins is achieved, marking a record for Ag-based ductile thermoelectrics. This study highlights the essential role of chemical fluctuations in modulating phonon and charge transports and offers valuable insight into the microstructure-defect–property interplay in ductile materials.


  • Thermoelectric properties of (In, Cr) 2 Ge 2 Te 6 layered compounds

    by Chenxi Xu, Hexige Wuliji, Pengfei Qiu, Kunpeng Zhao, Xun Shi

    This study systematically investigates the crystal structures and thermoelectric properties of layered (In, Cr) 2 Ge 2 Te 6 compounds, revealing that InCrGe 2 Te 6 solid solution exhibits ultralow lattice thermal conductivity and a maximum zT of 0.38.

  • Giant yet robust barocaloric cooling in superionic-ductile Ag2S thermoelectrics

    by Xiao-Ming Huang, Xiaowen Hao, Tingjiao Xiong, Yifan Yuan, Ziqi Guan, Xiaoli Huang, Hongliang Dong, Jinfu Shu, Le Kang, Bao Yuan, et al.

    Solid-state cooling based on caloric effects offers a promising and sustainable refrigeration solution. However, developing barocaloric materials that combine a large thermal response with high mechanical ductility remains challenging. Here, we report a giant barocaloric effect in superionic-ductile Ag2S-based thermoelectric semiconductors, achieved through medium-entropy alloying (Ag2S1-x-ySexTey). This yields a colossal barocaloric strength of ∼0.41 J kg−1 K−1 MPa−1 near room temperature, enabled by a large entropy change (∼42 J kg−1 K−1) under a low driving pressure of ∼100 MPa. In situ neutron and x-ray diffraction reveal a reversible pressure-driven order–disorder transition of the Ag-ion sublattice, with diffuse scattering confirming the giant configurational entropy change. Simultaneously, the material's inherently exceptional plasticity (compression >90%, stretching ∼43%, and bending >100%) ensures excellent cyclability, with a stable adiabatic temperature change of ∼4.8 K and negligible performance drift during repeated cycling. This work synergizes mechanical ductility with superionic entropy engineering, establishing a robust platform for efficient, durable barocaloric cooling and expanding the functional scope of thermoelectrics as versatile solid-state refrigerants.


  • Open Access

    Designing 3D Oxygen–Diffusion Scaffolds for High-performance Metal Fuels

    by Hexi Baoyin, Shan Feng, Hexige Wuliji, Ruifeng Liu, Xinba Yaer, Xiaoping Niu, Jun Wang, Kunpeng Zhao

    Metal fuels are central to energetic materials because of their high energy density and intense heat-release capability. However, early-stage formation of passivating oxide shells severely restricts oxygen diffusion, resulting in incomplete oxidation and limited energy utilization. Here, we report a grain-boundary engineering strategy to overcome this long-standing diffusion barrier by constructing three-dimensional oxygen-diffusion scaffolds within aluminum-based fuels through trace cerium addition. Rapidly solidified Al– x Ce powders develop a continuous Al 11 Ce 3 network along grain boundaries, which is in situ transformed into oxygen-ion-conductive CeO 2 during combustion. This scaffold enables sustained inward oxygen transport following a “surface triggering–boundary conduction–core activation” pathway, extending the combustion duration of aluminum by nearly an order of magnitude (up to 6760 ms) while achieving complete oxidation. This work establishes a general and scalable design principle for enhancing metal-fuel combustion through rare-earth-enabled oxygen-diffusion networks.

  • Anomalous temperature evolution of lattice anharmonicity and thermal transport in orthorhombic SnSe

    by Tianxiang Jiang, Wujie Qiu, Haijuan Zhang, Jifen Wang, Kunpeng Zhao, Huaqing Xie