XWXiaojia Wang

Xiaojia Wang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Xiaojia Wang has a total of 296 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Probing phonon mean-free-path distribution via thickness-dependent thermal conductivity in epitaxial SrSnO3

    by Chi Zhang, Fengdeng Liu, Donghwan Kim, Xiaotian Xu, Silu Guo, Yankai Pei, K. Andre Mkhoyan, Tianli Feng, Bharat Jalan, Xiaojia Wang


  • Phenyl Side Groups Enhance Phonon Transport in Rubrene Crystals

    by Xiaotian Xu, Jiazhen Xu, Yuqing Cai, Nusrat Chowdhury, Chi Zhang, David G. Cahill, Liang Chen, C. Daniel Frisbie, Xiaojia Wang

    Rubrene single crystals, renowned for their record-high hole mobility among organic semiconductors, are widely used in organic electronics where thermal management is essential. This study reports a comprehensive investigation of thermal transport in rubrene along its three primary crystallographic directions, integrating crystal growth, structural characterization, thermal measurements, and molecular dynamics (MD) simulations. Contrary to the well-established 2D nature of charge transport favored in the ab-plane, we observe that the room-temperature thermal conductivity along the interlayer c-axis (Λc = 0.29 W m-1 K-1) exceeds those along the a- and b-axes (Λa = 0.22 W m-1 K-1 and Λb = 0.24 W m-1 K-1), despite strong π-π stacking in the ab-plane. MD simulations reveal the origins of this counterintuitive observation, highlighting the pivotal role of phenyl side groups in facilitating phonon transport along the c-axis. Phonon dispersion and density of states analyses indicate enhanced low-frequency vibrational modes (0-3.7 THz) associated with the side groups. Participation ratio analyses confirm that vibrational modes in both the side groups and backbone have comparable degrees of spatial localization for carrying heat; however, higher phonon group velocities along the c-axis suggest more efficient thermal transport through the phenyl groups. Additionally, the 1/T temperature dependence of thermal conductivities along all three axes suggests crystalline behavior in rubrene as might be expected despite its complex molecular structure. These findings uncover a previously underappreciated role of side group dynamics in phonon transport in molecular crystals and provide new insights into developing thermal management strategies for organic electronic devices.


  • Fast magnetization precession and strong perpendicular magnetic anisotropy in ferrimagnetic Mn4N thin films improved by a Pd buffer layer

    by Yao Zhang, Yun Kim, Peter P. Murmu, Dingbin Huang, Deyuan Lyu, Jian-Ping Wang, Xiaojia Wang, Simon Granville


  • Optimizing time-resolved magneto-optical Kerr effect for high-fidelity magnetic characterization

    by Yun Kim, Dingbin Huang, Deyuan Lyu, Haoyue Sun, Jian-Ping Wang, Paul A. Crowell, Xiaojia Wang

    Spintronics has emerged as a key technology for fast and nonvolatile memory with great CMOS compatibility. As the building blocks for these cutting-edge devices, magnetic materials require precise characterization of their critical properties, such as the effective anisotropy field (Hk,eff, related to magnetic stability) and damping (α, a key factor in device energy efficiency). Accurate measurements of these properties are essential for designing and fabricating high-performance spintronic devices. Among advanced metrology techniques, time-resolved magneto-optical Kerr effect (TR-MOKE) stands out for its superb temporal and spatial resolutions, surpassing traditional methods like ferromagnetic resonance. However, the full potential of TR-MOKE has not yet been fully fledged due to the lack of systematic optimization and robust operational guidelines. In this study, we address this gap by developing experimentally validated guidelines for optimizing TR-MOKE metrology across materials with perpendicular magnetic anisotropy and in-plane magnetic anisotropy. While Co20Fe60B20 thin films are used for experimental validation, this optimization framework can be readily extended to a variety of materials such as L10-FePd with easy-axis dispersion. Our work identifies the optimal ranges of the field angle to simultaneously achieve high signal amplitudes and improve measurement sensitivities to Hk,eff and α. By suppressing the influence of inhomogeneities and boosting sensitivity, our work significantly enhances TR-MOKE capability to extract magnetic properties with high accuracy and reliability. This optimization framework positions TR-MOKE as an indispensable tool for advancing spintronics, paving the way for energy-efficient and high-speed devices that will redefine the landscape of modern computing and memory technologies.


  • Open Access

    Optimizing Time-resolved Magneto-optical Kerr Effect for High-fidelity Magnetic Characterization

    by Yun Kim, Dingbin Huang, Deyuan Lyu, Haoyue Sun, Jian-Ping Wang, Paul A. Crowell, Xiaojia Wang

    Spintronics has emerged as a key technology for fast and non-volatile memory with great CMOS compatibility. As the building blocks for these cutting-edge devices, magnetic materials require precise characterization of their critical properties, such as the effective anisotropy field ($H_{\rm{k,eff}}$, related to magnetic stability) and damping ($α$ key factor in device energy efficiency). Accurate measurements of these properties are essential for designing and fabricating high-performance spintronic devices. Among advanced metrology techniques, Time-resolved Magneto-Optical Kerr Effect (TR-MOKE) stands out for its superb temporal and spatial resolutions, surpassing traditional methods like ferromagnetic resonance (FMR). However, the full potential of TR-MOKE has not yet been fully pledged due to the lack of systematic optimization and robust operational guidelines. In this study, we address this gap by developing experimentally validated guidelines for optimizing TR-MOKE metrology across materials with perpendicular magnetic anisotropy (PMA) and in-plane magnetic anisotropy (IMA). Our work identifies the optimal ranges of the field angle to simultaneously achieve high signal amplitudes and improve measurement sensitivities to $H_{\rm{k,eff}}$ and $α$. By suppressing the influence of inhomogeneities and boosting sensitivity, our work significantly enhances TR-MOKE capability to extract magnetic properties with high accuracy and reliability. This optimization framework positions TR-MOKE as an indispensable tool for advancing spintronics, paving the way for energy-efficient and high-speed devices that will redefine the landscape of modern computing and memory technologies.

  • Thermal performance of materials for heat-assisted magnetic recording

    by Xiaotian Xu, Chi Zhang, Silu Guo, Nicholas C. A. Seaton, K. Andre Mkhoyan, Joseph Roth, Jie Gong, Xuan Zheng, Neil Zuckerman, Xiaojia Wang

    To increase the storage capacity of hard disk drives, Heat-Assisted Magnetic Recording (HAMR) takes advantage of laser heating to temporarily reduce the coercivity of recording media, enabling the writing of very small data bits on materials with high thermal stability. One key challenge in implementing HAMR is effective thermal management, which requires reliable determination of the thermal properties of HAMR materials over their range of operating temperature. This work reports the thermal properties of dielectric (amorphous silica, amorphous alumina, and AlN), metallic (gold and copper), and magnetic alloy (NiFe and CoFe) thin films used in HAMR heads from room temperature to 500 K measured with time-domain thermoreflectance. Our results show that the thermal conductivities of amorphous silica and alumina films increase with temperature, following the typical trends for amorphous materials. The polycrystalline AlN film exhibits weak thermal anisotropy, and its in-plane and through-plane thermal conductivities decrease with temperature. The measured thermal conductivities of AlN are significantly lower than that which would be present in single-crystal bulk material, and this is attributed to enhanced phonon-boundary scattering and phonon-defect scattering. The gold, copper, NiFe, and CoFe films show little temperature dependence in their thermal conductivities over the same temperature range. The measured thermal conductivities of gold and copper films are explained by the diffuse electron-boundary scattering using an empirical model.


  • Open Access

    Acceleration of ferromagnetic resonance measurements by Bayesian experimental design

    by D. Huang, X. Wang, D. B. Gopman

    Ferromagnetic resonance (FMR) is a broadly used dynamical measurement used to characterize a wide range of magnetic materials. Applied research and development on magnetic thin film materials is growing rapidly alongside a growing commercial appetite for magnetic memory and computing technologies. The ability to execute high-quality, fast FMR surveys of magnetic thin films is needed to meet the demanding throughput associated with rapid materials exploration and quality control. Here, we implement optimal Bayesian experimental design software developed by [McMichael et al. J. Res. Natl. Inst. Stand. Technol. 126, 126002 (2021)] in a vector network analyzer-FMR setup to demonstrate an unexplored opportunity to accelerate FMR measurements. A systematic comparison is made between the optimal Bayesian measurement and the conventional measurement. Reduced uncertainties in the linewidth and resonance frequency ranging from 40% to 60% are achieved with the Bayesian implementation for the same measurement duration. In practical terms, this approach reaches a target uncertainty of ±5 MHz for the linewidth and ±1 MHz for the resonance frequency in 2.5× less time than the conventional approach. As the optimal Bayesian approach only decreases random errors, we evaluate how large systematic errors may limit the full advantage of the optimal Bayesian approach. This approach can be used to deliver gains in measurement speed by a factor of 3 or more and as a software add-on has the flexibility to be added on to any FMR measurement system to accelerate materials discovery and quality control measurements, alike.


  • Open Access

    Temperature-dependent thermal conductivity of MBE-grown epitaxial SrSnO3 films

    by Chi Zhang, Fengdeng Liu, Silu Guo, Yingying Zhang, Xiaotian Xu, K. Andre Mkhoyan, Bharat Jalan, Xiaojia Wang

    As an ultrawide bandgap (∼4.1 eV) semiconductor, single crystalline SrSnO3 (SSO) has promising electrical properties for applications in power electronics and transparent conductors. The device performance can be limited by heat dissipation issues. However, a systematic study detailing its thermal transport properties remains elusive. This work studies the temperature-dependent thermal properties of a single crystalline SSO thin film prepared with hybrid molecular beam epitaxy. By combining time-domain thermoreflectance and Debye–Callaway modeling, physical insight into thermal transport mechanisms is provided. At room temperature, the 350-nm SSO film has a thermal conductivity of 4.4 W m−1 K−1, ∼60% lower than those of other perovskite oxides (SrTiO3, BaSnO3) with the same ABO3 structural formula. This difference is attributed to the low zone-boundary frequency of SSO, resulting from its distorted orthorhombic structure with tilted octahedra. At high temperatures, the thermal conductivity of SSO decreases with temperature following a ∼T−0.54 dependence, weaker than the typical T−1 trend dominated by the Umklapp scattering. This work not only reveals the fundamental mechanisms of thermal transport in single crystalline SSO but also sheds light on the thermal design and optimization of SSO-based electronic applications.


  • Open Access

    Magnetization Dynamics in Synthetic Antiferromagnets with Perpendicular Magnetic Anisotropy

    by Dingbin Huang, Delin Zhang, Yun Kim, Jian-Ping Wang, Xiaojia Wang

    Understanding the rich physics of magnetization dynamics in perpendicular synthetic antiferromagnets (p-SAFs) is crucial for developing next-generation spintronic devices. In this work, we systematically investigate the magnetization dynamics in p-SAFs combining time-resolved magneto-optical Kerr effect (TR-MOKE) measurements with theoretical modeling. These model analyses, based on a Landau-Lifshitz-Gilbert approach incorporating exchange coupling, provide details about the magnetization dynamic characteristics including the amplitudes, directions, and phases of the precession of p-SAFs under varying magnetic fields. These model-predicted characteristics are in excellent quantitative agreement with TR-MOKE measurements on an asymmetric p-SAF. We further reveal the damping mechanisms of two procession modes co-existing in the p-SAF and successfully identify individual contributions from different sources, including Gilbert damping of each ferromagnetic layer, spin pumping, and inhomogeneous broadening. Such a comprehensive understanding of magnetization dynamics in p-SAFs, obtained by integrating high-fidelity TR-MOKE measurements and theoretical modeling, can guide the design of p-SAF-based architectures for spintronic applications.