Luciano M. Santino
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Luciano M. Santino has a total of 39 co-authors. Here are the top co-authors by number of shared publications:
Yang Lu
Washington Univ, Inst Mat Sci & Engn, St Louis, MO 63130 USA
10 shared publications- Julio M. D'ARcy
Department of Chemistry
9 shared publications - Hongmin Wang
Department of Chemistry, Washington University, St. Louis, Missouri 63130, United States
6 shared publications Shinjita Acharya
Washington Univ, Dept Chem, St Louis, MO 63130 USA
6 shared publicationsYifan Diao
Washington Univ, Inst Mat Sci & Engn, St Louis, MO 63130 USA
6 shared publicationsAly Wayne
Department of Chemistry, Washington University in St. Louis, St. Louis, USA
2 shared publications
Latest Publications
- Open Access
- 29 May 2025
- Published by Springer Nature in Nature Methods
- Vol. 22 (6) , 1321-1330
A telescopic microscope equipped with a quanta image sensor for live-cell bioluminescence imaging
Bioluminescence is an attractive alternative to fluorescence for live-cell imaging; however, its low intensity has prevented widespread adoption. Specialized microscopes compensate by sacrificing spatial resolution, field of view and dynamic range—constraints imposed by the highest-sensitivity camera to date: the electron-multiplying charge-coupled device. Recently, quanta image sensor (QIS) technology has emerged for low-light imaging. Here, we show that a commercial QIS camera has exceptional sensitivity; however, its sensor dimensions necessitate a microscope designed to maximize its properties. We introduce a Keplerian-telescope-inspired microscope setup that, with the QIS, results in modestly improved signal-to-noise ratios at substantially higher spatial resolution, field of view and dynamic range, relative to the state of the art. The telescopic design also confers modularity, enabling multimodal imaging with epifluorescence. The ‘QIScope’ makes bioluminescence a viable tool for technically challenging live-cell experiments such as monitoring intracellular and extracellular vesicles simultaneously and the dynamics of low-abundance proteins.
- 29 May 2025
- Published by Springer Nature in Nature Methods
- Vol. 22 (6) , 1321-1330
Open AccessA telescopic microscope equipped with a quanta image sensor for live-cell bioluminescence imaging
Bioluminescence is an attractive alternative to fluorescence for live-cell imaging; however, its low intensity has prevented widespread adoption. Specialized microscopes compensate by sacrificing spatial resolution, field of view and dynamic range—constraints imposed by the highest-sensitivity camera to date: the electron-multiplying charge-coupled device. Recently, quanta image sensor (QIS) technology has emerged for low-light imaging. Here, we show that a commercial QIS camera has exceptional sensitivity; however, its sensor dimensions necessitate a microscope designed to maximize its properties. We introduce a Keplerian-telescope-inspired microscope setup that, with the QIS, results in modestly improved signal-to-noise ratios at substantially higher spatial resolution, field of view and dynamic range, relative to the state of the art. The telescopic design also confers modularity, enabling multimodal imaging with epifluorescence. The ‘QIScope’ makes bioluminescence a viable tool for technically challenging live-cell experiments such as monitoring intracellular and extracellular vesicles simultaneously and the dynamics of low-abundance proteins.
- 19 November 2019
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 11 (50) , 47320-47329
Synthesis of Submicron PEDOT Particles of High Electrical Conductivity via Continuous Aerosol Vapor Polymerization
Current state-of-the-art synthetic strategies produce conducting polymers suffering from low processability as well as unstable chemical and/or physical properties stifling research and development. Here, we introduce a platform for synthesizing scalable submicron-sized particles of the conducting polymer poly(3,4-ethylenedioxythiophene) (PEDOT). The synthesis is based on a hybrid approach utilizing an aerosol of aqueous oxidant droplets and monomer vapor to engineer a scalable synthetic scheme. This aerosol vapor polymerization (AVP) technology results in bulk quantities of discrete solid-state submicron particles (750 nm diameter) with so far the highest reported particle conductivity (330±70 S/cm). Moreover, particles are dispersible in organics and water, obviating the need for surfactants, and remain electrically conductive and doped over a period of months. This enhanced processability and environmental stability enables incorporation in thermoplastic and cementitious composites for engineering chemoresistive pH and temperature sensors.
- 19 November 2019
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 11 (50) , 47320-47329
Synthesis of Submicron PEDOT Particles of High Electrical Conductivity via Continuous Aerosol Vapor Polymerization
Current state-of-the-art synthetic strategies produce conducting polymers suffering from low processability as well as unstable chemical and/or physical properties stifling research and development. Here, we introduce a platform for synthesizing scalable submicron-sized particles of the conducting polymer poly(3,4-ethylenedioxythiophene) (PEDOT). The synthesis is based on a hybrid approach utilizing an aerosol of aqueous oxidant droplets and monomer vapor to engineer a scalable synthetic scheme. This aerosol vapor polymerization (AVP) technology results in bulk quantities of discrete solid-state submicron particles (750 nm diameter) with so far the highest reported particle conductivity (330±70 S/cm). Moreover, particles are dispersible in organics and water, obviating the need for surfactants, and remain electrically conductive and doped over a period of months. This enhanced processability and environmental stability enables incorporation in thermoplastic and cementitious composites for engineering chemoresistive pH and temperature sensors.
- 17 June 2019
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 11 (25) , 12358-12369
Vapor/liquid polymerization of ultraporous transparent and capacitive polypyrrole nanonets
Polypyrrole nanonets exhibiting a high specific capacitance of 518 F g−1 are synthesized via vapor–liquid interfacial polymerization and engineered into electrochemical capacitors.
- 17 June 2019
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 11 (25) , 12358-12369
Vapor/liquid polymerization of ultraporous transparent and capacitive polypyrrole nanonets
Polypyrrole nanonets exhibiting a high specific capacitance of 518 F g−1 are synthesized via vapor–liquid interfacial polymerization and engineered into electrochemical capacitors.
- 7 May 2019
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 2 (5) , 3435-3444
Converting Rust to PEDOT Nanofibers for Supercapacitors
- 7 May 2019
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 2 (5) , 3435-3444
Converting Rust to PEDOT Nanofibers for Supercapacitors
- 18 January 2019
- Published by Royal Society of Chemistry (RSC) in Sustainable Energy & Fuels
- Vol. 3 (5) , 1154-1162
Self-woven nanofibrillar PEDOT mats for impact-resistant supercapacitors
Here, we demonstrate a nanoengineering strategy that leads to an impact-resistant electrode for flexible energy storage devices such as supercapacitors resulting in state-of-the-art electrochemical performance. A template-less direct vapor synthesis produces a mat of poly(3,4-ethylenedioxythiophene) (PEDOT) 1D nanostructures. A nucleation-controlled self-weaving mechanism is supported enabling rapid synthesis of an electrochemically active flexible electrode in a single step from the vapor phase. Nanofibres self-assemble and “weave” in situ into a micrometer thick porous fibrillar mat characterized by a horizontally-directed interwoven nanofibrillar orientation. A nanofibrillar PEDOT mat is characterized by high conductivity (334 S cm−1), capacitance (164 F g−1) and flexibility (stable upon bending) as well as impact-resistance properties enabling it to withstand an impact energy density of 125 kJ m−2 and to continue storing energy. After a single 125 kJ m−2 mechanical impact, a symmetric electrochemical capacitor composed of nanofibrillar PEDOT mats is cycled for 11 000 times with 80% capacitance retention. After forty 125 kJ m−2 impacts, capacitance degrades by 6% and 1D electrode architecture remains.
- 18 January 2019
- Published by Royal Society of Chemistry (RSC) in Sustainable Energy & Fuels
- Vol. 3 (5) , 1154-1162
Self-woven nanofibrillar PEDOT mats for impact-resistant supercapacitors
Here, we demonstrate a nanoengineering strategy that leads to an impact-resistant electrode for flexible energy storage devices such as supercapacitors resulting in state-of-the-art electrochemical performance. A template-less direct vapor synthesis produces a mat of poly(3,4-ethylenedioxythiophene) (PEDOT) 1D nanostructures. A nucleation-controlled self-weaving mechanism is supported enabling rapid synthesis of an electrochemically active flexible electrode in a single step from the vapor phase. Nanofibres self-assemble and “weave” in situ into a micrometer thick porous fibrillar mat characterized by a horizontally-directed interwoven nanofibrillar orientation. A nanofibrillar PEDOT mat is characterized by high conductivity (334 S cm−1), capacitance (164 F g−1) and flexibility (stable upon bending) as well as impact-resistance properties enabling it to withstand an impact energy density of 125 kJ m−2 and to continue storing energy. After a single 125 kJ m−2 mechanical impact, a symmetric electrochemical capacitor composed of nanofibrillar PEDOT mats is cycled for 11 000 times with 80% capacitance retention. After forty 125 kJ m−2 impacts, capacitance degrades by 6% and 1D electrode architecture remains.
- 12 February 2018
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 1 (3) , 1219-1227
Metal Oxide-Assisted PEDOT Nanostructures via Hydrolysis-Assisted Vapor-Phase Polymerization for Energy Storage
- 12 February 2018
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 1 (3) , 1219-1227
Metal Oxide-Assisted PEDOT Nanostructures via Hydrolysis-Assisted Vapor-Phase Polymerization for Energy Storage
- 15 November 2017
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 9 (47) , 41496-41504
Condensing Vapor Phase Polymerization (CVPP) of Electrochemically Capacitive and Stable Polypyrrole Microtubes
We introduce a novel condensing vapor phase polymerization (CVPP) strategy for depositing microtubes of the conducting polymer polypyrrole; these serve as one-dimensional hollow microstructures for storing electrochemical energy. In CVPP, water droplets are structure-directing templates for polypyrrole microtubes. Water vapor condensation and polymerization occur simultaneously—conformal coatings of microtubes deposit on porous substrates such as hard carbon fiber paper or glass fiber filter paper. A mechanistic evolution of the microtubular morphology is proposed and tested based on the mass transport of water and monomer vapors as well as on the reaction stoichiometry. A coating of PPy microtubes is characterized by a high reversible capacitance of 342 F g–1 at 5 mV s–1 throughout 5000 cycles of cyclic voltammetry and a low sheet resistance of 70.2 Ω □–1. The open tubular structure is controlled in situ during synthesis and leads to electrodes that exhibit electrochemical stability at high scanning rates up to 250 mV s–1 retaining all stored charge, even after extensive cycling at 25 mV s–1.
- 15 November 2017
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 9 (47) , 41496-41504
Condensing Vapor Phase Polymerization (CVPP) of Electrochemically Capacitive and Stable Polypyrrole Microtubes
We introduce a novel condensing vapor phase polymerization (CVPP) strategy for depositing microtubes of the conducting polymer polypyrrole; these serve as one-dimensional hollow microstructures for storing electrochemical energy. In CVPP, water droplets are structure-directing templates for polypyrrole microtubes. Water vapor condensation and polymerization occur simultaneously—conformal coatings of microtubes deposit on porous substrates such as hard carbon fiber paper or glass fiber filter paper. A mechanistic evolution of the microtubular morphology is proposed and tested based on the mass transport of water and monomer vapors as well as on the reaction stoichiometry. A coating of PPy microtubes is characterized by a high reversible capacitance of 342 F g–1 at 5 mV s–1 throughout 5000 cycles of cyclic voltammetry and a low sheet resistance of 70.2 Ω □–1. The open tubular structure is controlled in situ during synthesis and leads to electrodes that exhibit electrochemical stability at high scanning rates up to 250 mV s–1 retaining all stored charge, even after extensive cycling at 25 mV s–1.
- 9 May 2017
- Published by American Chemical Society (ACS) in Journal of Chemical Education
- Vol. 94 (7) , 950-955
Studying Electrical Conductivity Using a 3D Printed Four-Point Probe Station
- 9 May 2017
- Published by American Chemical Society (ACS) in Journal of Chemical Education
- Vol. 94 (7) , 950-955
Studying Electrical Conductivity Using a 3D Printed Four-Point Probe Station
- 27 March 2017
- Published by Royal Society of Chemistry (RSC) in Sustainable Energy & Fuels
- Vol. 1 (3) , 482-491
Ultrahigh stability of high-power nanofibrillar PEDOT supercapacitors
PEDOT nanofibers show unprecedented cycling stability in aqueous supercapacitors, 90% capacitance for 350 000 cycles, and exhibit excellent power and energy density (25 kWkg−1 and 4.3 W h kg−1) at 1 V.
- 27 March 2017
- Published by Royal Society of Chemistry (RSC) in Sustainable Energy & Fuels
- Vol. 1 (3) , 482-491
Ultrahigh stability of high-power nanofibrillar PEDOT supercapacitors
PEDOT nanofibers show unprecedented cycling stability in aqueous supercapacitors, 90% capacitance for 350 000 cycles, and exhibit excellent power and energy density (25 kWkg−1 and 4.3 W h kg−1) at 1 V.
- 22 March 2017
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 5 (23) , 11772-11780
Low-temperature vapour phase polymerized polypyrrole nanobrushes for supercapacitors
A low-temperature modified vapour-phase synthesis allows for the deposition of high aspect ratio, conductive and capacitive one-dimensional nanostructures of the conducting polymer polypyrrole onto three-dimensional fibrous substrates. Nanofibrillar polypyrrole resembling nanobrushes can be deposited at temperatures as low as 50 °C without the use of hard templates. When deposited on a conductive substrate such as hard carbon paper, the nanofibers exhibit a three-electrode specific capacitance of 144.7 F g−1 over a 1.2 V window in 1 M lithium perchlorate with good reversibility. Two electrode electrochemical capacitors fabricated using polypyrrole on hard carbon paper exhibit a specific energy ranging from 7 to 13 W h kg−1 based on average electrode active mass with a maximum charging voltage between 0.6 and 1 V. Furthermore, the devices can undergo 200 000 cycles while retaining 70% of their initial capacitance when charged to 0.6 V. This work represents a significant advance in the synthesis of nanostructured polypyrrole from the vapor phase.
- 22 March 2017
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 5 (23) , 11772-11780
Low-temperature vapour phase polymerized polypyrrole nanobrushes for supercapacitors
A low-temperature modified vapour-phase synthesis allows for the deposition of high aspect ratio, conductive and capacitive one-dimensional nanostructures of the conducting polymer polypyrrole onto three-dimensional fibrous substrates. Nanofibrillar polypyrrole resembling nanobrushes can be deposited at temperatures as low as 50 °C without the use of hard templates. When deposited on a conductive substrate such as hard carbon paper, the nanofibers exhibit a three-electrode specific capacitance of 144.7 F g−1 over a 1.2 V window in 1 M lithium perchlorate with good reversibility. Two electrode electrochemical capacitors fabricated using polypyrrole on hard carbon paper exhibit a specific energy ranging from 7 to 13 W h kg−1 based on average electrode active mass with a maximum charging voltage between 0.6 and 1 V. Furthermore, the devices can undergo 200 000 cycles while retaining 70% of their initial capacitance when charged to 0.6 V. This work represents a significant advance in the synthesis of nanostructured polypyrrole from the vapor phase.