Wei Dou
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Wei Dou has a total of 53 co-authors. Here are the top co-authors by number of shared publications:
Baohua Li
Arktonics LLC, 1339 S. Pinnacle Dr, Fayetteville, AR 72701, United States of America
16 shared publicationsMansour Mortazavi
13 shared publicationsAboozar Mosleh
12 shared publicationsJoe Margetis
School of Electrical, Energy and Computer Engineering, Arizona State University, Phoenix AZ 85034, United States of America
11 shared publicationsJohn Tolle
School of Electrical, Energy and Computer Engineering, Arizona State University, Phoenix AZ 85034, United States of America
11 shared publicationsWei Du
11 shared publications
Latest Publications
- 30 November 2021
- Published by IOP Publishing in Nanotechnology
- Vol. 33 (8) , 085201
Investigation of SiGeSn/GeSn/SiGeSn single quantum well with enhanced well emission
In this work, a SiGeSn/GeSn/SiGeSn single quantum well was grown and characterized. The sample has a thicker GeSn well of 22nm compared to a previously reported 9nm well configuration. The thicker well leads to: (i) lowered ground energy level in Γ valley offering more bandgap directness; (ii) increased carrier density in the well; and (iii) improved carrier collection due to increased barrier height. As a result, significantly enhanced emission from the quantum well was observed. The strong photoluminescence (PL) signal allows for the estimation of quantum efficiency (QE), which was unattainable in previous studies. Using pumping-power-dependent PL spectra at 20K, the peak spontaneous QE and external QE were measured as 37.9% and 1.45%, respectively.
- 30 November 2021
- Published by IOP Publishing in Nanotechnology
- Vol. 33 (8) , 085201
Investigation of SiGeSn/GeSn/SiGeSn single quantum well with enhanced well emission
In this work, a SiGeSn/GeSn/SiGeSn single quantum well was grown and characterized. The sample has a thicker GeSn well of 22nm compared to a previously reported 9nm well configuration. The thicker well leads to: (i) lowered ground energy level in Γ valley offering more bandgap directness; (ii) increased carrier density in the well; and (iii) improved carrier collection due to increased barrier height. As a result, significantly enhanced emission from the quantum well was observed. The strong photoluminescence (PL) signal allows for the estimation of quantum efficiency (QE), which was unattainable in previous studies. Using pumping-power-dependent PL spectra at 20K, the peak spontaneous QE and external QE were measured as 37.9% and 1.45%, respectively.
- 1 July 2019
- Published by Elsevier in Applied Surface Science
- Vol. 481, 246-254
Low temperature epitaxy of high-quality Ge buffer using plasma enhancement via UHV-CVD system for photonic device applications
- 1 July 2019
- Published by Elsevier in Applied Surface Science
- Vol. 481, 246-254
Low temperature epitaxy of high-quality Ge buffer using plasma enhancement via UHV-CVD system for photonic device applications
- 26 November 2018
- Published by AIP Publishing in Applied Physics Letters
- Vol. 113 (22) , 221104
All group-IV SiGeSn/GeSn/SiGeSn QW laser on Si operating up to 90 K
In this work, all group-IV band-to-band lasers based on SiGeSn/GeSn/SiGeSn multi-quantum-well structures were demonstrated. Lasing performance was investigated via two 4-well samples. The thinner GeSn well sample exhibits a maximum lasing temperature of 20 K and a threshold of 55 kW/cm2 at 10 K, while the thicker well sample features a higher maximum operating temperature of 90 K and lower lasing thresholds of 25 and 62 kW/cm2 at 10 and 77 K, respectively. The distinct results were tentatively interpreted mainly by the difference of gain volume. This result provides guidance for the future GeSn quantum well laser optimization for higher performance.
- 26 November 2018
- Published by AIP Publishing in Applied Physics Letters
- Vol. 113 (22) , 221104
All group-IV SiGeSn/GeSn/SiGeSn QW laser on Si operating up to 90 K
In this work, all group-IV band-to-band lasers based on SiGeSn/GeSn/SiGeSn multi-quantum-well structures were demonstrated. Lasing performance was investigated via two 4-well samples. The thinner GeSn well sample exhibits a maximum lasing temperature of 20 K and a threshold of 55 kW/cm2 at 10 K, while the thicker well sample features a higher maximum operating temperature of 90 K and lower lasing thresholds of 25 and 62 kW/cm2 at 10 and 77 K, respectively. The distinct results were tentatively interpreted mainly by the difference of gain volume. This result provides guidance for the future GeSn quantum well laser optimization for higher performance.
- Open Access
- 4 April 2018
- Published by Springer Nature in Scientific Reports
- Vol. 8 (1) , 1-11
Investigation of GeSn Strain Relaxation and Spontaneous Composition Gradient for Low-Defect and High-Sn Alloy Growth
Recent development of group-IV alloy GeSn indicates its bright future for the application of mid-infrared Si photonics. Relaxed GeSn with high material quality and high Sn composition is highly desirable to cover mid-infrared wavelength. However, its crystal growth remains a great challenge. In this work, a systematic study of GeSn strain relaxation mechanism and its effects on Sn incorporation during the material growth via chemical vapor deposition was conducted. It was discovered that Sn incorporation into Ge lattice sites is limited by high compressive strain rather than historically acknowledged chemical reaction dynamics, which was also confirmed by Gibbs free energy calculation. In-depth material characterizations revealed that: (i) the generation of dislocations at Ge/GeSn interface eases the compressive strain, which offers a favorably increased Sn incorporation; (ii) the formation of dislocation loop near Ge/GeSn interface effectively localizes defects, leading to the subsequent low-defect grown GeSn. Following the discovered growth mechanism, a world-record Sn content of 22.3% was achieved. The experiment result shows that even higher Sn content could be obtained if further continuous growth with the same recipe is conducted. This report offers an essential guidance for the growth of high quality high Sn composition GeSn for future GeSn based optoelectronics.
- 4 April 2018
- Published by Springer Nature in Scientific Reports
- Vol. 8 (1) , 1-11
Open AccessInvestigation of GeSn Strain Relaxation and Spontaneous Composition Gradient for Low-Defect and High-Sn Alloy Growth
Recent development of group-IV alloy GeSn indicates its bright future for the application of mid-infrared Si photonics. Relaxed GeSn with high material quality and high Sn composition is highly desirable to cover mid-infrared wavelength. However, its crystal growth remains a great challenge. In this work, a systematic study of GeSn strain relaxation mechanism and its effects on Sn incorporation during the material growth via chemical vapor deposition was conducted. It was discovered that Sn incorporation into Ge lattice sites is limited by high compressive strain rather than historically acknowledged chemical reaction dynamics, which was also confirmed by Gibbs free energy calculation. In-depth material characterizations revealed that: (i) the generation of dislocations at Ge/GeSn interface eases the compressive strain, which offers a favorably increased Sn incorporation; (ii) the formation of dislocation loop near Ge/GeSn interface effectively localizes defects, leading to the subsequent low-defect grown GeSn. Following the discovered growth mechanism, a world-record Sn content of 22.3% was achieved. The experiment result shows that even higher Sn content could be obtained if further continuous growth with the same recipe is conducted. This report offers an essential guidance for the growth of high quality high Sn composition GeSn for future GeSn based optoelectronics.
- Open Access
- 1 February 2018
- Published by AIP Publishing in AIP Advances
- Vol. 8 (2) , 025104
Direct bandgap type-I GeSn/GeSn quantum well on a GeSn- and Ge- buffered Si substrate
This paper reports the comprehensive characterization of a Ge0.92Sn0.08/Ge0.86Sn0.14/Ge0.92Sn0.08 single quantum well. By using a strain relaxed Ge0.92Sn0.08 buffer, the direct bandgap Ge0.86Sn0.14 QW was achieved, which is unattainable by using only a Ge buffer. Band structure calculations and optical transition analysis revealed that the quantum well features type-I band alignment. The photoluminescence spectra showed dramatically increased quantum well peak intensity at lower temperature, confirming that the Ge0.86Sn0.14 quantum well is a direct bandgap material.
- 1 February 2018
- Published by AIP Publishing in AIP Advances
- Vol. 8 (2) , 025104
Open AccessDirect bandgap type-I GeSn/GeSn quantum well on a GeSn- and Ge- buffered Si substrate
This paper reports the comprehensive characterization of a Ge0.92Sn0.08/Ge0.86Sn0.14/Ge0.92Sn0.08 single quantum well. By using a strain relaxed Ge0.92Sn0.08 buffer, the direct bandgap Ge0.86Sn0.14 QW was achieved, which is unattainable by using only a Ge buffer. Band structure calculations and optical transition analysis revealed that the quantum well features type-I band alignment. The photoluminescence spectra showed dramatically increased quantum well peak intensity at lower temperature, confirming that the Ge0.86Sn0.14 quantum well is a direct bandgap material.
- 1 January 2018
- Published by Optica Publishing Group
- p. STh4I.4
Direct Bandgap Type-I GeSn Quantum Well toward Si-based Optoelectronics
GeSn single quantum well on relaxed GeSn and Ge buffered Si substrate was investigated. The direct bandgap well and type-I band alignment were achieved, which were confirmed by calculation and photoluminescence studies.
- 1 January 2018
- Published by Optica Publishing Group
- p. STh4I.4
Direct Bandgap Type-I GeSn Quantum Well toward Si-based Optoelectronics
GeSn single quantum well on relaxed GeSn and Ge buffered Si substrate was investigated. The direct bandgap well and type-I band alignment were achieved, which were confirmed by calculation and photoluminescence studies.
- Top Cited Papers
- 15 December 2017
- Published by American Chemical Society (ACS) in ACS Photonics
- Vol. 5 (3) , 827-833
Si-Based GeSn Lasers with Wavelength Coverage of 2–3 μm and Operating Temperatures up to 180 K
- 15 December 2017
- Published by American Chemical Society (ACS) in ACS Photonics
- Vol. 5 (3) , 827-833
Top Cited PapersSi-Based GeSn Lasers with Wavelength Coverage of 2–3 μm and Operating Temperatures up to 180 K
- Open Access
- 11 October 2017
- Published by American Vacuum Society in Journal of Vacuum Science & Technology B
- Vol. 35 (6) , 061204
Comparison study of the low temperature growth of dilute GeSn and Ge
Dilute GeSn films have been grown at the temperatures below 400 °C in a cold-walled ultrahigh vacuum chemical-vapor-deposition chamber. Diluted tin-tetrachloride (SnCl4) with a flow rate of 0.02 sccm was used as Sn precursor while the flow rate of Ge precursor germane was 10 sccm. For comparison, the Ge films were grown under the same conditions except only the precursor germane was used. Material growth study revealed the linear growth rates for both films and increased nucleation times at lower temperatures. Material and optical characterizations showed that the GeSn films featured longer nucleation times, higher growth rates, and higher crystal quality compared to those of Ge films grown at the same conditions. The growth mechanism investigation suggested that GeSn growth using SnCl4 is an exothermic chemical reaction which could lead to the improved material quality.
- 11 October 2017
- Published by American Vacuum Society in Journal of Vacuum Science & Technology B
- Vol. 35 (6) , 061204
Open AccessComparison study of the low temperature growth of dilute GeSn and Ge
Dilute GeSn films have been grown at the temperatures below 400 °C in a cold-walled ultrahigh vacuum chemical-vapor-deposition chamber. Diluted tin-tetrachloride (SnCl4) with a flow rate of 0.02 sccm was used as Sn precursor while the flow rate of Ge precursor germane was 10 sccm. For comparison, the Ge films were grown under the same conditions except only the precursor germane was used. Material growth study revealed the linear growth rates for both films and increased nucleation times at lower temperatures. Material and optical characterizations showed that the GeSn films featured longer nucleation times, higher growth rates, and higher crystal quality compared to those of Ge films grown at the same conditions. The growth mechanism investigation suggested that GeSn growth using SnCl4 is an exothermic chemical reaction which could lead to the improved material quality.
- Open Access
- 17 January 2017
- Published by Optica Publishing Group in Optics Letters
- Vol. 42 (3) , 387-390
Study of a SiGeSn/GeSn/SiGeSn structure toward direct bandgap type-I quantum well for all group-IV optoelectronics
A SiGeSn/GeSn/SiGeSn single quantum well structure was grown using an industry standard chemical vapor deposition reactor with low-cost commercially available precursors. The material characterization revealed the precisely controlled material growth process. Temperature-dependent photoluminescence spectra were correlated with band structure calculation for a structure accurately determined by high-resolution x-ray diffraction and transmission electron microscopy. Based on the result, a systematic study of SiGeSn and GeSn bandgap energy separation and barrier heights versus material compositions and strain was conducted, leading to a practical design of a type-I direct bandgap quantum well.
- 17 January 2017
- Published by Optica Publishing Group in Optics Letters
- Vol. 42 (3) , 387-390
Open AccessStudy of a SiGeSn/GeSn/SiGeSn structure toward direct bandgap type-I quantum well for all group-IV optoelectronics
A SiGeSn/GeSn/SiGeSn single quantum well structure was grown using an industry standard chemical vapor deposition reactor with low-cost commercially available precursors. The material characterization revealed the precisely controlled material growth process. Temperature-dependent photoluminescence spectra were correlated with band structure calculation for a structure accurately determined by high-resolution x-ray diffraction and transmission electron microscopy. Based on the result, a systematic study of SiGeSn and GeSn bandgap energy separation and barrier heights versus material compositions and strain was conducted, leading to a practical design of a type-I direct bandgap quantum well.
- Top Cited Papers
- 24 October 2016
- Published by AIP Publishing in Applied Physics Letters
- Vol. 109 (17) , 171105
An optically pumped 2.5 μm GeSn laser on Si operating at 110 K
This paper reports the demonstration of optically pumped GeSn edge-emitting lasers grown on Si substrates. The whole device structures were grown by an industry standard chemical vapor deposition reactor using the low cost commercially available precursors SnCl4 and GeH4 in a single run epitaxy process. Temperature-dependent characteristics of laser-output versus pumping-laser-input showed lasing operation up to 110 K. The 10 K lasing threshold and wavelength were measured as 68 kW/cm2 and 2476 nm, respectively. Lasing characteristic temperature (T0) was extracted as 65 K.
- 24 October 2016
- Published by AIP Publishing in Applied Physics Letters
- Vol. 109 (17) , 171105
Top Cited PapersAn optically pumped 2.5 μm GeSn laser on Si operating at 110 K
This paper reports the demonstration of optically pumped GeSn edge-emitting lasers grown on Si substrates. The whole device structures were grown by an industry standard chemical vapor deposition reactor using the low cost commercially available precursors SnCl4 and GeH4 in a single run epitaxy process. Temperature-dependent characteristics of laser-output versus pumping-laser-input showed lasing operation up to 110 K. The 10 K lasing threshold and wavelength were measured as 68 kW/cm2 and 2476 nm, respectively. Lasing characteristic temperature (T0) was extracted as 65 K.