Yuichiro K. Kato
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Yuichiro K. Kato has a total of 300 co-authors. Here are the top co-authors by number of shared publications:
- Akihiro Ishii
RIKEN
18 shared publications - Keigo Otsuka
Department of Mechanical Engineering, The University of Tokyo, Tokyo, Japan
15 shared publications A. Ishii
Nanoscale Quantum Photonics Laboratory, RIKEN Cluster for Pioneering Research, Saitama 351-0198, Japan
13 shared publicationsM. Yoshida
RIKEN 2 Nanoscale Quantum Photonics Laboratory Saitama 351-0198, Japan
13 shared publications- Shun Fujii
Keio University
13 shared publications - Chee Fai Fong
RIKEN Center for Advanced Photonics
12 shared publications
Latest Publications
- Open Access
- 15 October 2026
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 20 (42) , 28217-28225
Symmetry-Directed Engineering of Quantum Defects: Toward Monodispersed Organic Color Centers in Carbon Nanotubes
Achieving spectrally uniform single-photon emission is crucial for scalable quantum photonics, yet conventional approaches often yield broad and unpredictable emission. Here, we report on the selective creation of organic color centers (OCCs) on high-symmetry zigzag (10,0) single-walled carbon nanotubes via a [2 + 2] cycloaddition reaction with 4-cyclopentene-1,3-dione. Density functional theory predicts two possible OCC binding configurations separated by >200 meV, favoring the selective formation of a single OCC geometry. Through chirality sorting, hyperspectral photoluminescence imaging, and multi-step spectral screening, we isolate functionalized (10,0) nanotubes and observe a substantially narrower distribution of OCC emission wavelengths than similarly functionalized chiral nanotubes. Time-resolved photoluminescence and photon correlation measurements further confirm single-photon emission at room temperature. These results demonstrate divalent OCCs on symmetric nanotubes as promising quantum emitters, offering a route toward scalable atomically defined light sources for integrated photonics.
- 15 October 2026
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 20 (42) , 28217-28225
Open AccessSymmetry-Directed Engineering of Quantum Defects: Toward Monodispersed Organic Color Centers in Carbon Nanotubes
Achieving spectrally uniform single-photon emission is crucial for scalable quantum photonics, yet conventional approaches often yield broad and unpredictable emission. Here, we report on the selective creation of organic color centers (OCCs) on high-symmetry zigzag (10,0) single-walled carbon nanotubes via a [2 + 2] cycloaddition reaction with 4-cyclopentene-1,3-dione. Density functional theory predicts two possible OCC binding configurations separated by >200 meV, favoring the selective formation of a single OCC geometry. Through chirality sorting, hyperspectral photoluminescence imaging, and multi-step spectral screening, we isolate functionalized (10,0) nanotubes and observe a substantially narrower distribution of OCC emission wavelengths than similarly functionalized chiral nanotubes. Time-resolved photoluminescence and photon correlation measurements further confirm single-photon emission at room temperature. These results demonstrate divalent OCCs on symmetric nanotubes as promising quantum emitters, offering a route toward scalable atomically defined light sources for integrated photonics.
- Open Access
- 1 October 2026
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 18 (37) , 20125-20133
ortho -Halogen substituent design for creating near-infrared color centers in single-walled carbon nanotubes
Molecular design of aryldiazonium salts enables precise engineering of near-infrared color centers formed in single-walled carbon nanotubes.
- 1 October 2026
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 18 (37) , 20125-20133
Open Accessortho -Halogen substituent design for creating near-infrared color centers in single-walled carbon nanotubes
Molecular design of aryldiazonium salts enables precise engineering of near-infrared color centers formed in single-walled carbon nanotubes.
- 21 August 2026
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 12 (34)
Multidimensional spectro-temporal imaging of exciton dynamics under propagating acoustic strain in two-dimensional semiconductors
Dynamic strain offers a promising route to manipulate tightly bound excitons in two-dimensional semiconductors. Its impact, however, has so far been inferred primarily from time-averaged or spatially integrated measurements. In particular, for dynamic strain driven by surface acoustic waves (SAWs), the relatively small strain amplitude and competing piezoelectric effects have hindered direct access to the real-time evolution of exciton emission energy and recombination dynamics within a single acoustic cycle. Here we report a fully phase-synchronized, multidimensional spectro-temporal-spatial visualization of exciton emission in monolayer tungsten diselenide driven by propagating SAWs. By integrating phase-resolved microscopy and interferometric surface displacement measurements, we achieve simultaneous mapping of exciton emission energy, photoluminescence intensity, linewidth, and decay dynamics and directly correlate them with the dynamic strain field. Our work establishes propagating acoustic strain as a powerful platform for deterministic exciton control and provides a comprehensive framework for exploring nonequilibrium exciton dynamics in low-dimensional materials.
- 21 August 2026
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 12 (34)
Multidimensional spectro-temporal imaging of exciton dynamics under propagating acoustic strain in two-dimensional semiconductors
Dynamic strain offers a promising route to manipulate tightly bound excitons in two-dimensional semiconductors. Its impact, however, has so far been inferred primarily from time-averaged or spatially integrated measurements. In particular, for dynamic strain driven by surface acoustic waves (SAWs), the relatively small strain amplitude and competing piezoelectric effects have hindered direct access to the real-time evolution of exciton emission energy and recombination dynamics within a single acoustic cycle. Here we report a fully phase-synchronized, multidimensional spectro-temporal-spatial visualization of exciton emission in monolayer tungsten diselenide driven by propagating SAWs. By integrating phase-resolved microscopy and interferometric surface displacement measurements, we achieve simultaneous mapping of exciton emission energy, photoluminescence intensity, linewidth, and decay dynamics and directly correlate them with the dynamic strain field. Our work establishes propagating acoustic strain as a powerful platform for deterministic exciton control and provides a comprehensive framework for exploring nonequilibrium exciton dynamics in low-dimensional materials.
- Open Access
- 1 August 2026
- Published by American Chemical Society (ACS) in ACS Photonics
Photonic Waveguide Circuit Integrated with Carbon Nanotube Single-Photon Source Operating at Room Temperature
Photonic integrated circuits require robust room-temperature single-photon sources to enable scalable quantum technologies. Single-walled carbon nanotubes (CNTs), with their unique excitonic properties and chemical tunability, are attractive candidates, but their integration into photonic circuits remains challenging. In this work, we demonstrate the integration of functionalized CNTs as room-temperature single-photon emitters into photonic cavities and waveguide circuits. (6,5) CNTs with aryl sp3 defects are either stochastically deposited via dropcasting or deterministically positioned on photonic cavities using an anthracene-assisted transfer method guided by real-time photoluminescence monitoring. Photoluminescence spectra reveal cavity-coupled, spectrally narrowed emission, while second-order autocorrelation measurements confirm single-photon propagation through the photonic integrated circuit, highlighting the potential of CNTs for scalable, room-temperature quantum photonic applications.
- 1 August 2026
- Published by American Chemical Society (ACS) in ACS Photonics
Open AccessPhotonic Waveguide Circuit Integrated with Carbon Nanotube Single-Photon Source Operating at Room Temperature
Photonic integrated circuits require robust room-temperature single-photon sources to enable scalable quantum technologies. Single-walled carbon nanotubes (CNTs), with their unique excitonic properties and chemical tunability, are attractive candidates, but their integration into photonic circuits remains challenging. In this work, we demonstrate the integration of functionalized CNTs as room-temperature single-photon emitters into photonic cavities and waveguide circuits. (6,5) CNTs with aryl sp3 defects are either stochastically deposited via dropcasting or deterministically positioned on photonic cavities using an anthracene-assisted transfer method guided by real-time photoluminescence monitoring. Photoluminescence spectra reveal cavity-coupled, spectrally narrowed emission, while second-order autocorrelation measurements confirm single-photon propagation through the photonic integrated circuit, highlighting the potential of CNTs for scalable, room-temperature quantum photonic applications.
- 7 July 2026
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2026-01 (10) , 837
(Invited) Deterministic Formation of Single Organic Color Centers In Single-Walled Carbon Nanotubes
Quantum light sources using single-walled carbon nanotubes show promise for quantum technologies but face challenges in achieving precise control over color center formation. Here, we present a novel technique for deterministic creation of single organic color centers in carbon nanotubes using in situ photochemical reaction [1]. By monitoring discrete intensity changes in photoluminescence spectra, we achieve precise control over the formation of individual color centers. Furthermore, our method allows for position-controlled formation of color centers as validated through photoluminescence imaging. We also demonstrate photon antibunching from a color center, confirming the quantum nature of the defects formed. This technique represents a significant step forward in the precise engineering of atomically defined quantum emitters in carbon nanotubes, facilitating their integration into advanced quantum photonic devices and systems.
- 7 July 2026
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2026-01 (10) , 837
(Invited) Deterministic Formation of Single Organic Color Centers In Single-Walled Carbon Nanotubes
Quantum light sources using single-walled carbon nanotubes show promise for quantum technologies but face challenges in achieving precise control over color center formation. Here, we present a novel technique for deterministic creation of single organic color centers in carbon nanotubes using in situ photochemical reaction [1]. By monitoring discrete intensity changes in photoluminescence spectra, we achieve precise control over the formation of individual color centers. Furthermore, our method allows for position-controlled formation of color centers as validated through photoluminescence imaging. We also demonstrate photon antibunching from a color center, confirming the quantum nature of the defects formed. This technique represents a significant step forward in the precise engineering of atomically defined quantum emitters in carbon nanotubes, facilitating their integration into advanced quantum photonic devices and systems.
- Open Access
- 2 April 2026
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 20 (14) , 10933-10942
Trion Transfer in Mixed-Dimensional Heterostructures
Charged excitons, or trions, offering spin and charge degrees of freedom, have primarily been investigated in doped systems where charges are long considered indispensable. Here, we present an alternative route to ultraefficient trion emission from an intrinsic, defect-free semiconductor via a transfer mechanism. By exciting trions in two-dimensional tungsten-diselenide donors and transferring them into one-dimensional carbon-nanotube acceptors in mixed-dimensional heterostructures, we circumvent the usual carrier requirement, overcoming intrinsic Auger-quenching limitations. Benefiting from a reservoir effect induced by dimensional heterogeneity, this process achieves trion emission efficiencies increased by over 100-fold compared to conventional doping-based approaches, and remains robust across diverse doping conditions. Our findings extend the exciton-transfer paradigm to the three-body quasiparticles, offering a platform for advancing excitonic physics and trion-based optoelectronic/spintronic applications.
- 2 April 2026
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 20 (14) , 10933-10942
Open AccessTrion Transfer in Mixed-Dimensional Heterostructures
Charged excitons, or trions, offering spin and charge degrees of freedom, have primarily been investigated in doped systems where charges are long considered indispensable. Here, we present an alternative route to ultraefficient trion emission from an intrinsic, defect-free semiconductor via a transfer mechanism. By exciting trions in two-dimensional tungsten-diselenide donors and transferring them into one-dimensional carbon-nanotube acceptors in mixed-dimensional heterostructures, we circumvent the usual carrier requirement, overcoming intrinsic Auger-quenching limitations. Benefiting from a reservoir effect induced by dimensional heterogeneity, this process achieves trion emission efficiencies increased by over 100-fold compared to conventional doping-based approaches, and remains robust across diverse doping conditions. Our findings extend the exciton-transfer paradigm to the three-body quasiparticles, offering a platform for advancing excitonic physics and trion-based optoelectronic/spintronic applications.
- Open Access
- 19 February 2026
- Published by Optica Publishing Group in Optical Materials Express
- Vol. 16 (3) , 646
Dielectric environment engineering via 2D material heterostructure formation on a hybrid photonic crystal nanocavity [Invited]
Hybrid integration of two-dimensional (2D) materials with nanophotonic structures has enabled compact and tunable optoelectronic devices. Yet, the influence of local dielectric perturbations introduced during integration remains underexplored, particularly for multilayer or heterostructure assemblies. Here, we demonstrate deliberate dielectric environment engineering of photonic crystal (PhC) nanocavities through sequential stacking of 2D material flakes. Building upon our previous finding that a monolayer can induce a self-aligned cavity, we show that multilayer and heterostructure stacking enable further post-fabrication control over cavity properties. The hybrid nanocavities maintain high optical quality under multiple transfers, and encapsulation with hexagonal boron nitride (hBN) yields nearly twofold recovery of the quality factor by effectively smoothing the refractive-index profile and reducing out-of-plane losses. These experimental results are consistent with numerical simulations. Enhanced photoluminescence and reduced emission lifetime from the MoTe 2 flake on the hybrid cavity confirm Purcell-enhanced light-matter coupling. These results establish a robust and reconfigurable strategy for tuning cavity performance through controlled heterostructure assembly, expanding the design toolbox for scalable hybrid nanophotonic systems.
- 19 February 2026
- Published by Optica Publishing Group in Optical Materials Express
- Vol. 16 (3) , 646
Open AccessDielectric environment engineering via 2D material heterostructure formation on a hybrid photonic crystal nanocavity [Invited]
Hybrid integration of two-dimensional (2D) materials with nanophotonic structures has enabled compact and tunable optoelectronic devices. Yet, the influence of local dielectric perturbations introduced during integration remains underexplored, particularly for multilayer or heterostructure assemblies. Here, we demonstrate deliberate dielectric environment engineering of photonic crystal (PhC) nanocavities through sequential stacking of 2D material flakes. Building upon our previous finding that a monolayer can induce a self-aligned cavity, we show that multilayer and heterostructure stacking enable further post-fabrication control over cavity properties. The hybrid nanocavities maintain high optical quality under multiple transfers, and encapsulation with hexagonal boron nitride (hBN) yields nearly twofold recovery of the quality factor by effectively smoothing the refractive-index profile and reducing out-of-plane losses. These experimental results are consistent with numerical simulations. Enhanced photoluminescence and reduced emission lifetime from the MoTe 2 flake on the hybrid cavity confirm Purcell-enhanced light-matter coupling. These results establish a robust and reconfigurable strategy for tuning cavity performance through controlled heterostructure assembly, expanding the design toolbox for scalable hybrid nanophotonic systems.
- Open Access
Trion transfer in mixed-dimensional heterostructures
Charged excitons, or trions, offering unique spin and charge degrees of freedom, have primarily been investigated in doped systems where charges are long considered indispensable. Here, we present an alternative route to ultra-efficient trion emission from an intrinsic, defect-free semiconductor via a transfer mechanism. By exciting trions in two-dimensional tungsten-diselenide donors and transferring them into one-dimensional carbon-nanotube acceptors in mixed-dimensional heterostructures, we circumvent the usual carrier requirement, overcoming intrinsic Auger-quenching limitations. Benefitting from a reservoir effect induced by dimensional heterogeneity, this process achieves trion emission efficiencies increased by over 100-fold compared to conventional doping-based approaches, and remains robust across diverse doping conditions. Our findings extend the exciton transfer paradigm to the three-body quasiparticles, offering a new platform for advancing excitonic physics and trion-based optoelectronic/spintronic applications.
Open AccessTrion transfer in mixed-dimensional heterostructures
Charged excitons, or trions, offering unique spin and charge degrees of freedom, have primarily been investigated in doped systems where charges are long considered indispensable. Here, we present an alternative route to ultra-efficient trion emission from an intrinsic, defect-free semiconductor via a transfer mechanism. By exciting trions in two-dimensional tungsten-diselenide donors and transferring them into one-dimensional carbon-nanotube acceptors in mixed-dimensional heterostructures, we circumvent the usual carrier requirement, overcoming intrinsic Auger-quenching limitations. Benefitting from a reservoir effect induced by dimensional heterogeneity, this process achieves trion emission efficiencies increased by over 100-fold compared to conventional doping-based approaches, and remains robust across diverse doping conditions. Our findings extend the exciton transfer paradigm to the three-body quasiparticles, offering a new platform for advancing excitonic physics and trion-based optoelectronic/spintronic applications.
- Open Access
- 21 August 2025
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 25 (35) , 13103-13109
Deterministic Formation of Single Organic Color Centers in Single-Walled Carbon Nanotubes
Quantum light sources using single-walled carbon nanotubes show promise for quantum technologies but face challenges in achieving precise control over color center formation. Here, we present a novel technique for deterministic creation of single organic color centers in carbon nanotubes using in situ photochemical reaction. By monitoring discrete intensity changes in photoluminescence spectra, we achieve precise control over the formation of individual color centers. Furthermore, our method allows for position-controlled formation of color centers as validated through photoluminescence imaging. We also demonstrate photon antibunching from a color center, confirming the quantum nature of the defects formed. This technique represents a significant step forward in the precise engineering of atomically defined quantum emitters in carbon nanotubes, facilitating their integration into advanced quantum photonic devices and systems.
- 21 August 2025
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 25 (35) , 13103-13109
Open AccessDeterministic Formation of Single Organic Color Centers in Single-Walled Carbon Nanotubes
Quantum light sources using single-walled carbon nanotubes show promise for quantum technologies but face challenges in achieving precise control over color center formation. Here, we present a novel technique for deterministic creation of single organic color centers in carbon nanotubes using in situ photochemical reaction. By monitoring discrete intensity changes in photoluminescence spectra, we achieve precise control over the formation of individual color centers. Furthermore, our method allows for position-controlled formation of color centers as validated through photoluminescence imaging. We also demonstrate photon antibunching from a color center, confirming the quantum nature of the defects formed. This technique represents a significant step forward in the precise engineering of atomically defined quantum emitters in carbon nanotubes, facilitating their integration into advanced quantum photonic devices and systems.
- 29 July 2025
- Published by Springer Nature
- p. 1-40
Molecular Adsorption Effects on Excitons in Air-Suspended Carbon Nanotubes
- 29 July 2025
- Published by Springer Nature
- p. 1-40
Molecular Adsorption Effects on Excitons in Air-Suspended Carbon Nanotubes