HHHyunwoo Ha

Hyunwoo Ha

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Hyunwoo Ha has a total of 76 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Interspersing CeOx Clusters to the Pt–TiO2 Interfaces for Catalytic Promotion of TiO2-Supported Pt Nanoparticles

    by Mi Yoo, Eunji Kang, Hyunwoo Ha, Jieun Yun, Hyuk Choi, Ju Hyeok Lee, Tae Jun Kim, Jiho Min, Jin-Seok Choi, Kug-Seung Lee, et al.

    We propose an interface-engineered oxide-supported Pt nanoparticle-based catalyst with improved low-temperature activity toward CO oxidation. By wet-impregnating 1 wt % Ce on TiO2, we synthesized hybrid oxide support of CeOx–TiO2, in which dense CeOx clusters formed on the surface of TiO2. Then, the Pt/CeOx–TiO2 catalyst was synthesized by impregnating 2 wt % Pt on the CeOx–TiO2 supporting oxide. Pt–CeOx–TiO2 triphase interfaces were eventually formed upon impregnation of Pt on CeOx–TiO2. The Pt–CeOx–TiO2 interfaces open up the interface-mediated Mars–van Krevelen CO oxidation pathway, thus providing additional interfacial reaction sites for CO oxidation. Consequently, the specific reaction rate of Pt/CeOx–TiO2 for CO oxidation was increased by 3.2 times compared with that of Pt/TiO2 at 140 °C. Our results demonstrate a widely applicable and straightforward method of catalytic activation of the interfaces between metal nanoparticles and supporting oxides, which enabled fine-tuning of the catalytic performance of oxide-supported metal nanoparticle classes of heterogeneous catalysts.


  • Influence of the Pt size and CeO2 morphology at the Pt–CeO2 interface in CO oxidation

    by Sinmyung Yoon, Hyunwoo Ha, Jihun Kim, Eonu Nam, Mi Yoo, Beomgyun Jeong, Hyun You Kim, Kwangjin An

    The catalytic activity derived from the metal–support interaction at the Pt–CeO2 interface can be demonstrated by the two descriptors of Pt particle size and CeO2 morphology.


  • Enhancing the inherent catalytic activity and stability of TiO2 supported Pt single-atoms at CeOx–TiO2 interfaces

    by Mi Yoo, Eunji Kang, Hyuk Choi, Hyunwoo Ha, Hanseul Choi, Jin-Seok Choi, Kug-Seung Lee, Richard Celestre, David A. Shapiro, Jeong Young Park, et al.

    Single-atoms (SAs) with atomically coordinated reaction centers are considered the next generation of catalysts that can exhibit exceptional catalytic efficiency. However, the general concern about thermodynamic vulnerabilities of SAs questions their practical value. Moreover, whether the inherent catalytic nature of SAs is superior compared with that of larger nanoparticles is still under debate. Here, we address two controversies by a comparative study using two catalysts: Pt/TiO2 and Pt/CeOx–TiO2. Based on a hierarchical study of density functional theory, time-resolved catalysis performance test, in situ infrared spectroscopy, and operando X-ray absorption spectroscopy, we could unveil the catalytic nature of Pt-SAs and their stability. By utilizing the heterogeneous interface formed between TiO2 supporting particles and CeOx clusters formed on the surface of TiO2, we preferentially synthesized Pt-SAs pinned at the CeOx–TiO2 interfaces on CeOx–TiO2 hybrid-oxide supports. The strong electronic coupling between the Pt-SAs and the Ce ions at the CeOx–TiO2 interfaces enhanced the catalytic activity toward CO oxidation of Pt-SAs and improved the long-term stability under CO oxidation conditions. The CO oxidation activity of Pt-SAs stabilized at CeOx–TiO2 was improved by 13.5 times at 200 °C compared with the Pt-SAs on TiO2. The results present how to easily improve the activity and stability of Pt-SAs using a simple interface control method. Moreover, we demonstrate that the catalytic activity and the stability of Pt-SAs can be monitored through the chemical state of the interfaces. Our study provides comprehensive understanding about the catalytic nature as well as a novel strategy toward applications of Pt-SAs, enabling sustainable use of Pt in heterogeneous catalysts.


  • Open Access

    Sub-micro droplet reactors for green synthesis of Li3VO4 anode materials in lithium ion batteries

    by Ha Tran Huu, Ngoc Hung Vu, Hyunwoo Ha, Joonhee Moon, Hyun You Kim, Won Bin Im

    The conventional solid-state reaction suffers from low diffusivity, high energy consumption, and uncontrolled morphology. These limitations are competed by the presence of water in solution route reaction. Herein, based on concept of combining above methods, we report a facile solid-state reaction conducted in water vapor at low temperature along with calcium doping for modifying lithium vanadate as anode material for lithium-ion batteries. The optimized material, delivers a superior specific capacity of 543.1, 477.1, and 337.2 mAh g−1 after 200 and 1000 cycles at current densities of 100, 1000 and 4000 mA g−1, respectively, which is attributed to the contribution of pseudocapacitance. In this work, we also use experimental and theoretical calculation to demonstrate that the enhancement of doped lithium vanadate is attributed to particles confinement of droplets in water vapor along with the surface and structure variation of calcium doping effect.


  • Open Access

    A Measure of Active Interfaces in Supported Catalysts for High-temperature Reactions

    by Siwon Lee, Hyunwoo Ha, Kyung Taek Bae, Seunghyun Kim, Hyuk Choi, Jun Hyuk Kim, Jongsu Seo, Jin Choi, Yong-Ryun Jo, Bong-Joong Kim, et al.

    Formulating knowledge of structure-function relationships in heterogeneous catalysis is central to the rational design of highly efficient catalysts, yet the elucidation of dominant reaction sites has remained as a grand challenge for researchers. Here, we present a novel methodology that can be used to visualize metal-gas and metal-oxide-gas interfaces in three dimensions and to quantify their catalytic activity levels. As a case study, CH4 oxidation occurring in a Pt/CeO2 system is chosen. By employing thermally robust Pt@CeO2 model catalysts with size-tunable and monodisperse cores, and gas-permeable shells, we reconstruct a series of heterogeneous structures in 3D via electron tomography and match the information precisely to catalytic activity data and theoretical calculations. This strategy reveals that the two different interfaces concurrently catalyze the CH4 oxidation and that their contribution to the overall reaction rate changes dynamically with respect to the Pt size, temperature, and gas atmosphere. Our results provide a new analytic platform on which to explore reaction pathways and mechanisms applicable to multiple reactions and materials.

  • Open Access

    How Rh surface breaks CO2 molecules under ambient pressure

    by Jeongjin Kim, Hyunwoo Ha, Won Hui Doh, Kohei Ueda, Kazuhiko Mase, Hiroshi Kondoh, Bongjin Simon Mun, Hyun You Kim, Jeong Young Park

    Utilization of carbon dioxide (CO2) molecules leads to increased interest in the sustainable synthesis of methane (CH4) or methanol (CH3OH). The representative reaction intermediate consisting of a carbonyl or formate group determines yields of the fuel source during catalytic reactions. However, their selective initial surface reaction processes have been assumed without a fundamental understanding at the molecular level. Here, we report direct observations of spontaneous CO2 dissociation over the model rhodium (Rh) catalyst at 0.1 mbar CO2. The linear geometry of CO2 gas molecules turns into a chemically active bent-structure at the interface, which allows non-uniform charge transfers between chemisorbed CO2 and surface Rh atoms. By combining scanning tunneling microscopy, X-ray photoelectron spectroscopy at near-ambient pressure, and computational calculations, we reveal strong evidence for chemical bond cleavage of O‒CO* with ordered intermediates structure formation of (2 × 2)-CO on an atomically flat Rh(111) surface at room temperature.


  • Open Access

    Sub-micro droplet reactors: Green synthesis of Li3VO4 anode materials for lithium ion batteries

    by Tran Ha, Ngoc Hung Vu, Hyunwoo Ha, Joonhee Moon, Hyun You Kim, Won Bin Im

    A new green-chemistry strategy, based on modified solid-state reaction with the addition of water vapor to accelerate acid-base reactions (ABR) at low temperature, was developed along with Ca-doping to synthesize electrode material for lithium-ion batteries. The new method which helps in control the particles size and saving energy in synthesis has been developed. To explain this process, we proposed a mechanism in which water droplets play a key role as sub-micro reactors, calculated as few tens of nanometers, to ensure proper reaction conditions and confine crystal growth to nano-dimensions. The synergic effect of the proposed ABR method and Ca-doping is discussed to further explain the increase in the specific surface area and electrochemical performance of the anode material. The optimized material, Ca-doped Li3VO4, delivers a superior specific capacity of 543.1 mAh⸳g-1 after 200 cycles at a current density of 100 mA⸳g-1, which could be attributed to the contribution of pseudocapacitance.

  • In Situ Engineering of Pd Nanosponge Armored with Graphene Dots Using Br– toward High-Performance and Stable Electrocatalyst for the Hydrogen Evolution Reaction

    by Van-Toan Nguyen, Hyunwoo Ha, Ngoc-Anh Nguyen, Hyesung An, Hyun You Kim, Ho-Suk Choi

    In this study, we report a facile synthetic pathway to a 3D Pd nanosponge-shaped networks wrapped by graphene dots ([email protected]), which show superior electrocatalytic activity toward HER and exhibited excellent long-term stability in acidic media. [email protected] was synthesized by simply mixing Pd precursors, reducing agent, carbon dots (Cdots) and Br- ion at 30 °C. Experimental results and density functional theory calculations suggested that the Br- ions played an essential role to accelerate the exfoliation of Cdot, supplying graphene layers which could wrap the nanosponge-shaped Pd and finally form [email protected] In the absence of the Br- ions, only aggregated Pd NPs were formed and randomly mixed with Cdots. The resultant [email protected] exhibited a high electrochemically active surface area and the accelerated charge transport characteristics, leading to its superior electrocatalytic activity toward HER in acidic media. The HER overpotential of [email protected] was 32 mV at 10 mA cm-2 and a Tafel slope was 33 mV dec-1. Furthermore, the unique [email protected] catalyst showed long-term stability over 3000 cycles in acidic media as well, owing to the protection of Pd nanosponges by graphene dot-wrapping. The overall HER performance of [email protected] catalyst exceeded that of commercial Pt/C.


  • A tailored oxide interface creates dense Pt single-atom catalysts with high catalytic activity

    by Mi Yoo, Young-Sang Yu, Hyunwoo Ha, Siwon Lee, Jin-Seok Choi, Sunyoung Oh, Eunji Kang, Hyuk Choi, Hyesung An, Kug-Seung Lee, et al.

    Catalytic supremacy of Pt-single atoms achieved by CeO x –TiO 2 interfaces.


  • Open Access

    Oxygen activation on the interface between Pt nanoparticles and mesoporous defective TiO2 during CO oxidation

    by Sunyoung Oh, Hyunwoo Ha, Hanseul Choi, Changbum Jo, Jangkeun Cho, Hyuk Choi, Ryong Ryoo, Hyun You Kim, Jeong Young Park

    Platinum-based heterogeneous catalysts are mostly used in various commercial chemical processes because of their high catalytic activity, influenced by the metal/oxide interaction. To design rational catalysts with high performance, it is crucial to understand the relationship between the metal–oxide interface and the reaction pathway. Here, we investigate the role of oxygen defect sites in the reaction mechanism for CO oxidation using Pt nanoparticles supported on mesoporous TiO2 catalysts with oxygen defects. We show an intrinsic correlation between the catalytic reactivity and the local properties of titania with oxygen defects (i.e., Ti3+ sites). In situ infrared spectroscopy observations of the Pt/mesoporous TiO2−x catalyst indicate that an oxygen molecule bond can be activated at the perimeter between the Pt and an oxygen vacancy in TiO2 by neighboring CO molecules on the Pt surface before CO oxidation begins. The proposed reaction pathways for O2 activation at the Pt/TiO2−x interface based on density functional theory confirm our experimental findings. We suggest that this provides valuable insight into the intrinsic origin of the metal/support interaction influenced by the presence of oxygen vacancies, which clarifies the pivotal role played by the support.