Bruno Henriques
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Bruno Henriques has a total of 178 co-authors. Here are the top co-authors by number of shared publications:
- Eduarda Pereira
LAQV-REQUIMTE, Department of Chemistry, University of Aveiro, 3810-193, Aveiro, Portugal
52 shared publications Eduarda Pereira
27 shared publications- Armando Costa Duarte
CESAM & Department of Chemistry, University of Aveiro, Campus universitário de Santiago, 3810-193 Aveiro, Portugal
21 shared publications - Rosa Freitas
Department of Biology, University of Aveiro, 3810-193, Aveiro, Portugal; CESAM, University of Aveiro, 3810-193, Aveiro, Portugal
17 shared publications - João Pinto
Department of Chemistry, LAQV-REQUIMTE—Associated Laboratory for Green Chemistry, University of Aveiro, 3810-193 Aveiro, Portugal
16 shared publications - Thainara Viana
LAQV-REQUIMTE-Associated Laboratory for Green Chemistry, Department of Chemistry, Campus de Santiago, University of Aveiro, 3810-193 Aveiro, Portugal
16 shared publications
Latest Publications
- Open Access
- 17 July 2026
- Published by Elsevier in Chemical Engineering Research and Design
- Vol. 232, 594-603
Removal of rare-earth elements from complex aqueous solutions using a microporous niobium-iron silicate: From optimisation to simulated e-waste applications
- 17 July 2026
- Published by Elsevier in Chemical Engineering Research and Design
- Vol. 232, 594-603
Open AccessRemoval of rare-earth elements from complex aqueous solutions using a microporous niobium-iron silicate: From optimisation to simulated e-waste applications
- Open Access
- 20 April 2026
- Published by Elsevier in Biochemical Engineering Journal
- Vol. 232
How nutrients, pH and element concentration shape the biosorption of classical and emerging contaminants by living Gracilaria gracilis
- 20 April 2026
- Published by Elsevier in Biochemical Engineering Journal
- Vol. 232
Open AccessHow nutrients, pH and element concentration shape the biosorption of classical and emerging contaminants by living Gracilaria gracilis
- Open Access
- 1 April 2026
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 11 (14) , 22158-22170
Thiourea-formaldehyde-Functionalized Graphene Oxide for the Selective Removal of Copper from Multielement Solution
Copper (Cu), a critical raw material (CRMs) essential for renewable energy technologies, requires sustainable recovery strategies to ensure supply security and minimize environmental impacts. Recent market trends highlight the growing economic and strategic importance of Cu, reinforcing the need for selective recovery from secondary and waste-derived resources. However, Cu separation from complex waste streams, such as wind turbine leachates, remains challenging due to competition from base metals and rare earth elements. In this study, a thiourea-formaldehyde functionalized graphene oxide (G3DTF) is introduced as a new sulfur- and nitrogen-rich hybrid sorbent for selective Cu recovery under competitive conditions. Unlike conventional graphene-based materials, G3DTF incorporates tailored S/N donor sites within a graphene oxide framework, creating preferential coordination environments for Cu. The sorbent was evaluated in both monoelement and equimolar multielement solutions (100 μM of each element: boron, cobalt, copper, nickel, praseodymium, neodymium, gadolinium, dysprosium). Under optimized conditions, G3DTF achieved up to ≈99% Cu removal while exhibiting negligible uptake of competing ions. Langmuir isotherm analysis yielded a maximum adsorption capacity (q max) of 23.4 mg g-1, indicating strong affinity to Cu. Kinetic analysis revealed condition-dependent behavior. Copper adsorption followed pseudo-first-order kinetics in monoelement systems, whereas chemisorption became rate-limiting under competitive multielement matrices. Response surface optimization identified sorbent dosage as the dominant operational parameter, with optimal performance at 1.1 g L-1 and pH 5.2, independent of salinity. XPS analysis confirmed that Cu-S governs selective binding. The performance of G3DTF in real leachate-mimicking systems further validated its selectivity and application potential. These results demonstrate the ability of G3DTF as a sustainable platform for selective Cu recovery from CRM-rich waste streams.
- 1 April 2026
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 11 (14) , 22158-22170
Open AccessThiourea-formaldehyde-Functionalized Graphene Oxide for the Selective Removal of Copper from Multielement Solution
Copper (Cu), a critical raw material (CRMs) essential for renewable energy technologies, requires sustainable recovery strategies to ensure supply security and minimize environmental impacts. Recent market trends highlight the growing economic and strategic importance of Cu, reinforcing the need for selective recovery from secondary and waste-derived resources. However, Cu separation from complex waste streams, such as wind turbine leachates, remains challenging due to competition from base metals and rare earth elements. In this study, a thiourea-formaldehyde functionalized graphene oxide (G3DTF) is introduced as a new sulfur- and nitrogen-rich hybrid sorbent for selective Cu recovery under competitive conditions. Unlike conventional graphene-based materials, G3DTF incorporates tailored S/N donor sites within a graphene oxide framework, creating preferential coordination environments for Cu. The sorbent was evaluated in both monoelement and equimolar multielement solutions (100 μM of each element: boron, cobalt, copper, nickel, praseodymium, neodymium, gadolinium, dysprosium). Under optimized conditions, G3DTF achieved up to ≈99% Cu removal while exhibiting negligible uptake of competing ions. Langmuir isotherm analysis yielded a maximum adsorption capacity (q max) of 23.4 mg g-1, indicating strong affinity to Cu. Kinetic analysis revealed condition-dependent behavior. Copper adsorption followed pseudo-first-order kinetics in monoelement systems, whereas chemisorption became rate-limiting under competitive multielement matrices. Response surface optimization identified sorbent dosage as the dominant operational parameter, with optimal performance at 1.1 g L-1 and pH 5.2, independent of salinity. XPS analysis confirmed that Cu-S governs selective binding. The performance of G3DTF in real leachate-mimicking systems further validated its selectivity and application potential. These results demonstrate the ability of G3DTF as a sustainable platform for selective Cu recovery from CRM-rich waste streams.
- Open Access
- 25 February 2026
- Published by Springer Nature in Bioprocess and Biosystems Engineering
- Vol. 49 (4) , 877-889
Comparing the efficiency of living and non-living macroalgae biomass in removing classical and emergent contaminants from complex multi-element mixtures
Although macroalgae are promising biosorbents for the removal of various contaminants, their effectiveness in complex mixtures requires comprehensive comparative evaluation under multi-contaminant conditions. The ability of living and non-living Ulva lactuca and Gracilaria gracilis to simultaneously uptake Rare Earth Elements (REEs) (Y, La, Nd, Eu, Gd, Dy) and classical contaminants (Hg, Cd, Pb, As) from equimolar mixtures was compared. Batch sorption experiments were conducted for 72 h under optimised conditions of salinity (10) and pH (7.8), in which 5 g of living biomass and an equivalent non-living biomass (0.60–0.85 g) were exposed to contaminated seawater (1 L) under constant stirring (800 rpm). The living biomass exhibited high removal rates (> 80%) for REEs, Hg, and Pb, while for As and Cd, lower removals were achieved. Non-living biomass showed significantly lower removal ability for REE (generally < 40%). These findings suggest a two-step approach, exploiting, first, non-living biomass to remove common contaminants and, after, living biomass for bioaccumulating REEs, which could later be recovered for reuse.
- 25 February 2026
- Published by Springer Nature in Bioprocess and Biosystems Engineering
- Vol. 49 (4) , 877-889
Open AccessComparing the efficiency of living and non-living macroalgae biomass in removing classical and emergent contaminants from complex multi-element mixtures
Although macroalgae are promising biosorbents for the removal of various contaminants, their effectiveness in complex mixtures requires comprehensive comparative evaluation under multi-contaminant conditions. The ability of living and non-living Ulva lactuca and Gracilaria gracilis to simultaneously uptake Rare Earth Elements (REEs) (Y, La, Nd, Eu, Gd, Dy) and classical contaminants (Hg, Cd, Pb, As) from equimolar mixtures was compared. Batch sorption experiments were conducted for 72 h under optimised conditions of salinity (10) and pH (7.8), in which 5 g of living biomass and an equivalent non-living biomass (0.60–0.85 g) were exposed to contaminated seawater (1 L) under constant stirring (800 rpm). The living biomass exhibited high removal rates (> 80%) for REEs, Hg, and Pb, while for As and Cd, lower removals were achieved. Non-living biomass showed significantly lower removal ability for REE (generally < 40%). These findings suggest a two-step approach, exploiting, first, non-living biomass to remove common contaminants and, after, living biomass for bioaccumulating REEs, which could later be recovered for reuse.
- Open Access
- 24 January 2026
- Published by MDPI AG in Journal of Xenobiotics
- Vol. 16 (1) , 20
Remediation Potential of Ulva lactuca for Europium: Removal Efficiency, Metal Partitioning and Stress Biomarkers
As demand for rare earth elements (REEs) rises and environmental concerns about the extraction of primary resources grow, biological methods for removing these elements have gained significant attention as eco-friendly alternatives. This study assessed the ability of the green macroalga Ulva lactuca to remove europium (Eu) from aqueous solutions, evaluated the cellular partition of this element and investigated the toxicological effects of Eu exposure on its biochemical performance. U. lactuca was exposed to variable concentrations of Eu (ranging from 0.5 to 50 mg/L), and the amount of Eu in both the solution and algal biomass was analyzed after 72 h. The results showed that U. lactuca successfully removed 85 to 95% of Eu at low exposure concentrations (0.5–5.0 mg/L), with removal efficiencies of 75% and 47% at 10 and 50 mg/L, respectively. Europium accumulated in algal biomass in a concentration-dependent manner, reaching up to 22 mg/g dry weight (DW) at 50 mg/L. The distribution of Eu between extracellular and intracellular fractions of U. lactuca demonstrated that at higher concentrations (5.0–50 mg/L), 93–97% of Eu remained bound to the extracellular fraction, whereas intracellular uptake accounted for approximately 20% at the lowest concentration (0.5 mg/L). Biochemical analyses showed significant modulation of antioxidant defenses. Superoxide dismutase activity increased at 10 and 50 mg/L, while catalase and glutathione peroxidase activities were enhanced at lower concentrations (0.5–1.0 mg/L) and inhibited at higher exposures. Lipid peroxidation levels remained similar to controls at most concentrations, with no evidence of severe membrane damage except at the highest Eu level. Overall, the results demonstrate that U. lactuca is an efficient and resilient biological system for Eu removal, combining high sorption capacity with controlled biochemical responses. These findings highlight its potential application in environmentally sustainable remediation strategies for REE-contaminated waters, while also providing insights into Eu toxicity and cellular partitioning mechanisms in marine macroalgae.
- 24 January 2026
- Published by MDPI AG in Journal of Xenobiotics
- Vol. 16 (1) , 20
Open AccessRemediation Potential of Ulva lactuca for Europium: Removal Efficiency, Metal Partitioning and Stress Biomarkers
As demand for rare earth elements (REEs) rises and environmental concerns about the extraction of primary resources grow, biological methods for removing these elements have gained significant attention as eco-friendly alternatives. This study assessed the ability of the green macroalga Ulva lactuca to remove europium (Eu) from aqueous solutions, evaluated the cellular partition of this element and investigated the toxicological effects of Eu exposure on its biochemical performance. U. lactuca was exposed to variable concentrations of Eu (ranging from 0.5 to 50 mg/L), and the amount of Eu in both the solution and algal biomass was analyzed after 72 h. The results showed that U. lactuca successfully removed 85 to 95% of Eu at low exposure concentrations (0.5–5.0 mg/L), with removal efficiencies of 75% and 47% at 10 and 50 mg/L, respectively. Europium accumulated in algal biomass in a concentration-dependent manner, reaching up to 22 mg/g dry weight (DW) at 50 mg/L. The distribution of Eu between extracellular and intracellular fractions of U. lactuca demonstrated that at higher concentrations (5.0–50 mg/L), 93–97% of Eu remained bound to the extracellular fraction, whereas intracellular uptake accounted for approximately 20% at the lowest concentration (0.5 mg/L). Biochemical analyses showed significant modulation of antioxidant defenses. Superoxide dismutase activity increased at 10 and 50 mg/L, while catalase and glutathione peroxidase activities were enhanced at lower concentrations (0.5–1.0 mg/L) and inhibited at higher exposures. Lipid peroxidation levels remained similar to controls at most concentrations, with no evidence of severe membrane damage except at the highest Eu level. Overall, the results demonstrate that U. lactuca is an efficient and resilient biological system for Eu removal, combining high sorption capacity with controlled biochemical responses. These findings highlight its potential application in environmentally sustainable remediation strategies for REE-contaminated waters, while also providing insights into Eu toxicity and cellular partitioning mechanisms in marine macroalgae.
- Open Access
- 12 November 2025
- Published by Elsevier in Marine Pollution Bulletin
- Vol. 223, 118918
Ecotoxicological impacts associated with fluorescent lamp waste leachates on the marine macroalga Ulva sp.
- 12 November 2025
- Published by Elsevier in Marine Pollution Bulletin
- Vol. 223, 118918
Open AccessEcotoxicological impacts associated with fluorescent lamp waste leachates on the marine macroalga Ulva sp.
- Open Access
Uptake and Effects of Yttrium on the Seaweed Ulva sp.: A Study on the Potential Risks of Rare Earth Elements in Aquatic Environments
Technological proliferation relies on critical elements such as rare earth elements (REEs) and raises environmental problems associated with raw material extraction, industrial manufacturing, and the informal management of the growing e-waste. Algae are good bioindicators of contamination and have shown promise as biosorbents for remediating metal-contaminated environments. However, the effects of REEs on algae are still poorly documented and understood. This study investigated the uptake of yttrium (Y)—one of the most frequently used REEs, particularly in fluorescent lamps—by Ulva sp., as well as its effects on total chlorophyll content, relative growth rate, and biochemical performance. The algae were exposed to Y for 72 h at environmentally relevant concentrations, including levels found in e-waste leachates (0.5, 5.0, 50, and 500 mg/L). Ulva sp. removed 86% of Y within 72 h, with a bioconcentration factor of up to 621. EDTA analysis revealed that over 90% of yttrium was retained on the algal surface. SEM-EDS mapping showed crystal structures on the algae where Y was present. While the relative growth rate was unaffected by the tested Y gradient, photosynthesis was significantly impaired at 500 mg/L. Despite the activation of defence mechanisms, cell damage was observed at most Y concentrations tested, highlighting the potential risks associated with the presence of REEs in aquatic environments.
Open AccessUptake and Effects of Yttrium on the Seaweed Ulva sp.: A Study on the Potential Risks of Rare Earth Elements in Aquatic Environments
Technological proliferation relies on critical elements such as rare earth elements (REEs) and raises environmental problems associated with raw material extraction, industrial manufacturing, and the informal management of the growing e-waste. Algae are good bioindicators of contamination and have shown promise as biosorbents for remediating metal-contaminated environments. However, the effects of REEs on algae are still poorly documented and understood. This study investigated the uptake of yttrium (Y)—one of the most frequently used REEs, particularly in fluorescent lamps—by Ulva sp., as well as its effects on total chlorophyll content, relative growth rate, and biochemical performance. The algae were exposed to Y for 72 h at environmentally relevant concentrations, including levels found in e-waste leachates (0.5, 5.0, 50, and 500 mg/L). Ulva sp. removed 86% of Y within 72 h, with a bioconcentration factor of up to 621. EDTA analysis revealed that over 90% of yttrium was retained on the algal surface. SEM-EDS mapping showed crystal structures on the algae where Y was present. While the relative growth rate was unaffected by the tested Y gradient, photosynthesis was significantly impaired at 500 mg/L. Despite the activation of defence mechanisms, cell damage was observed at most Y concentrations tested, highlighting the potential risks associated with the presence of REEs in aquatic environments.
- Open Access
A Recycling-Oriented Approach to Rare Earth Element Recovery Using Low-Cost Agricultural Waste
The exponential increase in electronic waste (e-waste) from end-of-life electrical and electronic equipment presents a growing environmental challenge. E-waste contains high concentrations of rare earth elements (REEs), which are classified as critical raw materials (CRMs). Their removal and recovery from contaminated systems not only mitigate pollution but also support resource sustainability within a circular economy framework. The present study proposed the use of hazelnut shells as a biosorbent to reduce water contamination and recover REEs. The sorption capabilities of this lignocellulosic material were assessed and optimized using the response surface methodology (RSM) combined with a Box–Behnken Design (three factors, three levels). Factors such as pH (4 to 8), salinity (0 to 30), and biosorbent dose (0.25 to 0.75 g/L) were evaluated in a complex mixture containing 9 REEs (Y, La, Ce, Pr, Nd, Eu, Gd, Tb and Dy; equimolar concentration of 1 µmol/L). Salinity was found to be the factor with greater significance for REEs sorption efficiency, followed by water pH and biosorbent dose. At a pH of 7, salinity of 0, biosorbent dose of 0.75 g/L, and a contact time of 48 h, optimal conditions were observed, achieving removals of 100% for Gd and Eu and between 81 and 99% for other REEs. Optimized conditions were also predicted to maximize the REEs concentration in the biosorbent, which allowed us to obtain values (total REEs content of 2.69 mg/g) higher than those in some ores. These results underscore the high potential of this agricultural waste with no relevant commercial value to improve water quality while providing an alternative source of elements of interest for reuse (circular economy).
Open AccessA Recycling-Oriented Approach to Rare Earth Element Recovery Using Low-Cost Agricultural Waste
The exponential increase in electronic waste (e-waste) from end-of-life electrical and electronic equipment presents a growing environmental challenge. E-waste contains high concentrations of rare earth elements (REEs), which are classified as critical raw materials (CRMs). Their removal and recovery from contaminated systems not only mitigate pollution but also support resource sustainability within a circular economy framework. The present study proposed the use of hazelnut shells as a biosorbent to reduce water contamination and recover REEs. The sorption capabilities of this lignocellulosic material were assessed and optimized using the response surface methodology (RSM) combined with a Box–Behnken Design (three factors, three levels). Factors such as pH (4 to 8), salinity (0 to 30), and biosorbent dose (0.25 to 0.75 g/L) were evaluated in a complex mixture containing 9 REEs (Y, La, Ce, Pr, Nd, Eu, Gd, Tb and Dy; equimolar concentration of 1 µmol/L). Salinity was found to be the factor with greater significance for REEs sorption efficiency, followed by water pH and biosorbent dose. At a pH of 7, salinity of 0, biosorbent dose of 0.75 g/L, and a contact time of 48 h, optimal conditions were observed, achieving removals of 100% for Gd and Eu and between 81 and 99% for other REEs. Optimized conditions were also predicted to maximize the REEs concentration in the biosorbent, which allowed us to obtain values (total REEs content of 2.69 mg/g) higher than those in some ores. These results underscore the high potential of this agricultural waste with no relevant commercial value to improve water quality while providing an alternative source of elements of interest for reuse (circular economy).
- Open Access
- 5 April 2025
- Published by Elsevier in Journal of Environmental Chemical Engineering
- Vol. 13 (3)
Seaweed as a sustainable solution for rare earth elements removal from acid mine drainage
- 5 April 2025
- Published by Elsevier in Journal of Environmental Chemical Engineering
- Vol. 13 (3)
Open AccessSeaweed as a sustainable solution for rare earth elements removal from acid mine drainage
- Open Access
- 25 August 2024
- Published by Elsevier in Journal of Environmental Management
- Vol. 368, 122211
Removal of Rare Earth Elements from complex mixtures by using manganese ferrite nanoparticles: Optimization through surface response methodology
- 25 August 2024
- Published by Elsevier in Journal of Environmental Management
- Vol. 368, 122211
Open AccessRemoval of Rare Earth Elements from complex mixtures by using manganese ferrite nanoparticles: Optimization through surface response methodology