Paul R. Coxon
Research Subjects
Paul R. Coxon has a total of 110 co-authors. Here are the top co-authors by number of shared publications:
- Yimin Chao
National Energy Key Laboratory for New Hydrogen-Ammonia Energy Technologies, Foshan Xianhu Laboratory, Foshan 528200, P. R. China
11 shared publications - Kai Xi
School of Chemistry, Engineering Research Center of Energy Storage Materials and Devices, Ministry of Education, National Innovation Platform (Center) for Industry‐Education Integration of Energy Storage Technology, State Key Laboratory of Electrical Insulation and Power Equipment, Engineering Research Center of Energy Storage Material and Chemistry, Universities of Shaanxi Province Xi'an Jiaotong University Xi'an Shaanxi China
7 shared publications Qi Wang
Energy Materials Laboratory, School of Chemistry, University of East Anglia, Norwich NR4 7TJ, United Kingdom
4 shared publicationsL. Šiller
3 shared publicationsMhairi Gass
Super STEM, STFC Daresbury Laboratory
3 shared publicationsR. Vasant Kumar
Department of Materials Science and Metallurgy, University of Cambridge, Cambridge CB3 0FS, UK
3 shared publications
Latest Publications
- Open Access
- 25 November 2016
- Published by Springer Nature in Scientific Reports
- Vol. 6 (1) , 37752
A universal synthetic route to carbon nanotube/transition metal oxide nano-composites for lithium ion batteries and electrochemical capacitors
We report a simple synthetic approach to coaxially grow transition metal oxide (TMO) nanostructures on carbon nanotubes (CNT) with ready control of phase and morphology. A thin (~4 nm) sulfonated-polystyrene (SPS) pre-coating is essential for the deposition of transition metal based materials. This layer has abundant sulfonic groups (−SO3−) that can effectively attract Ni2+, Co2+, Zn2+ ions through electrostatic interaction and induce them via hydrolysis, dehydration and recrystallization to form coaxial (NiO, Co3O4, NiCoO2 and ZnCo2O4) shells and a nanosheet-like morphology around CNT. These structures possess a large active surface and enhanced structural robustness when used as electrode materials for lithium-ion batteries (LIBs) and electrochemical capacitors (ECs). As electrodes for LIBs, the ZnCo2O4@CNT material shows extremely stable cycling performance with a discharge capacity of 1068 mAh g−1 after 100 cycles at a current density of 400 mAg−1. For EC applications, the NiCoO2@CNT exhibits a high capacitance of 1360 Fg−1 at current densities of 10 Ag−1 after 3000 cycles and an overall capacitance loss of only 1.4%. These results demonstrate the potential of such hybrid materials meeting the crucial requirements of cycling stability and high rate capability for energy conversion and storage devices.
- 25 November 2016
- Published by Springer Nature in Scientific Reports
- Vol. 6 (1) , 37752
Open AccessA universal synthetic route to carbon nanotube/transition metal oxide nano-composites for lithium ion batteries and electrochemical capacitors
We report a simple synthetic approach to coaxially grow transition metal oxide (TMO) nanostructures on carbon nanotubes (CNT) with ready control of phase and morphology. A thin (~4 nm) sulfonated-polystyrene (SPS) pre-coating is essential for the deposition of transition metal based materials. This layer has abundant sulfonic groups (−SO3−) that can effectively attract Ni2+, Co2+, Zn2+ ions through electrostatic interaction and induce them via hydrolysis, dehydration and recrystallization to form coaxial (NiO, Co3O4, NiCoO2 and ZnCo2O4) shells and a nanosheet-like morphology around CNT. These structures possess a large active surface and enhanced structural robustness when used as electrode materials for lithium-ion batteries (LIBs) and electrochemical capacitors (ECs). As electrodes for LIBs, the ZnCo2O4@CNT material shows extremely stable cycling performance with a discharge capacity of 1068 mAh g−1 after 100 cycles at a current density of 400 mAg−1. For EC applications, the NiCoO2@CNT exhibits a high capacitance of 1360 Fg−1 at current densities of 10 Ag−1 after 3000 cycles and an overall capacitance loss of only 1.4%. These results demonstrate the potential of such hybrid materials meeting the crucial requirements of cycling stability and high rate capability for energy conversion and storage devices.
- 26 October 2016
- Published by Wiley in Advanced Functional Materials
- Vol. 26 (46) , 8418-8426
Advanced Lithium–Sulfur Batteries Enabled by a Bio‐Inspired Polysulfide Adsorptive Brush
Issues with the dissolution and diffusion of polysulfides in liquid organic electrolytes hinder the advance of lithium–sulfur batteries for next‐generation energy storage. To trap and re‐utilize the polysulfides without hampering lithium ion conductivity, a bio‐inspired, brush‐like interlayer consisting of zinc oxide (ZnO) nanowires and interconnected conductive frameworks is proposed. The chemical effect of ZnO on capturing polysulfides has been conceptually confirmed, initially by using a commercially available macroporous nickel foam as a conductive backbone, which is then replaced by a free‐standing, ultra‐light micro/mesoporous carbon (C) nanofiber mat for practical application. Having a high sulfur loading of 3 mg cm−2, the sulfur/multi‐walled carbon nanotube composite cathode with a ZnO/C interlayer exhibits a reversible capacity of 776 mA h g−1 after 200 cycles at 1C with only 0.05% average capacity loss per cycle. A good cycle performance at a high rate can be mainly attributed to the strong chemical bonding between ZnO and polysulfides, fast electron transfer, and an optimized ion diffusion path arising from a well‐organized nanoarchitecture. These results herald a new approach to advanced lithium–sulfur batteries using brush‐like chemi‐functional interlayers.
- 26 October 2016
- Published by Wiley in Advanced Functional Materials
- Vol. 26 (46) , 8418-8426
Advanced Lithium–Sulfur Batteries Enabled by a Bio‐Inspired Polysulfide Adsorptive Brush
Issues with the dissolution and diffusion of polysulfides in liquid organic electrolytes hinder the advance of lithium–sulfur batteries for next‐generation energy storage. To trap and re‐utilize the polysulfides without hampering lithium ion conductivity, a bio‐inspired, brush‐like interlayer consisting of zinc oxide (ZnO) nanowires and interconnected conductive frameworks is proposed. The chemical effect of ZnO on capturing polysulfides has been conceptually confirmed, initially by using a commercially available macroporous nickel foam as a conductive backbone, which is then replaced by a free‐standing, ultra‐light micro/mesoporous carbon (C) nanofiber mat for practical application. Having a high sulfur loading of 3 mg cm−2, the sulfur/multi‐walled carbon nanotube composite cathode with a ZnO/C interlayer exhibits a reversible capacity of 776 mA h g−1 after 200 cycles at 1C with only 0.05% average capacity loss per cycle. A good cycle performance at a high rate can be mainly attributed to the strong chemical bonding between ZnO and polysulfides, fast electron transfer, and an optimized ion diffusion path arising from a well‐organized nanoarchitecture. These results herald a new approach to advanced lithium–sulfur batteries using brush‐like chemi‐functional interlayers.
- 1 September 2016
- Published by Elsevier in Nano Energy
- Vol. 27, 457-465
Sea urchin-like NiCoO2@C nanocomposites for Li-ion batteries and supercapacitors
- 1 September 2016
- Published by Elsevier in Nano Energy
- Vol. 27, 457-465
Sea urchin-like NiCoO2@C nanocomposites for Li-ion batteries and supercapacitors
- Open Access
- 1 December 2015
- Published by Elsevier in Progress in Natural Science: Materials International
- Vol. 25 (6) , 583-590
The use of electro-deoxidation in molten salts to reduce the energy consumption of solar grade silicon and increase the output of PV solar cells
- 1 December 2015
- Published by Elsevier in Progress in Natural Science: Materials International
- Vol. 25 (6) , 583-590
Open AccessThe use of electro-deoxidation in molten salts to reduce the energy consumption of solar grade silicon and increase the output of PV solar cells
- 1 April 2015
- Published by Elsevier in Inorganic Chemistry Communications
- Vol. 54, 66-68
Design and synthesis of a novel d10–d10 mixed metal-based polymer with superior luminescent properties to select Ca2+ and Zn2+
- 1 April 2015
- Published by Elsevier in Inorganic Chemistry Communications
- Vol. 54, 66-68
Design and synthesis of a novel d10–d10 mixed metal-based polymer with superior luminescent properties to select Ca2+ and Zn2+
- Open Access
- 1 December 2014
- Published by AIP Publishing in APL Materials
- Vol. 2 (12)
Graphene-wrapped sulfur/metal organic framework-derived microporous carbon composite for lithium sulfur batteries
A three-dimensional hierarchical sandwich-type graphene sheet-sulfur/carbon (GS-S/CZIF8-D) composite for use in a cathode for a lithium sulfur (Li-S) battery has been prepared by an ultrasonic method. The microporous carbon host was prepared by a one-step pyrolysis of Zeolitic Imidazolate Framework-8 (ZIF-8), a typical zinc-containing metal organic framework (MOF), which offers a tunable porous structure into which electro-active sulfur can be diffused. The thin graphene sheet, wrapped around the sulfur/zeolitic imidazolate framework-8 derived carbon (S/CZIF8-D) composite, has excellent electrical conductivity and mechanical flexibility, thus facilitating rapid electron transport and accommodating the changes in volume of the sulfur electrode. Compared with the S/CZIF8-D sample, Li-S batteries with the GS-S/CZIF8-D composite cathode showed enhanced capacity, improved electrochemical stability, and relatively high columbic efficiency by taking advantage of the synergistic effects of the microporous carbon from ZIF-8 and a highly interconnected graphene network. Our results demonstrate that a porous MOF-derived scaffold with a wrapped graphene conductive network structure is a potentially efficient design for a battery electrode that can meet the challenge arising from low conductivity and volume change.
- 1 December 2014
- Published by AIP Publishing in APL Materials
- Vol. 2 (12)
Open AccessGraphene-wrapped sulfur/metal organic framework-derived microporous carbon composite for lithium sulfur batteries
A three-dimensional hierarchical sandwich-type graphene sheet-sulfur/carbon (GS-S/CZIF8-D) composite for use in a cathode for a lithium sulfur (Li-S) battery has been prepared by an ultrasonic method. The microporous carbon host was prepared by a one-step pyrolysis of Zeolitic Imidazolate Framework-8 (ZIF-8), a typical zinc-containing metal organic framework (MOF), which offers a tunable porous structure into which electro-active sulfur can be diffused. The thin graphene sheet, wrapped around the sulfur/zeolitic imidazolate framework-8 derived carbon (S/CZIF8-D) composite, has excellent electrical conductivity and mechanical flexibility, thus facilitating rapid electron transport and accommodating the changes in volume of the sulfur electrode. Compared with the S/CZIF8-D sample, Li-S batteries with the GS-S/CZIF8-D composite cathode showed enhanced capacity, improved electrochemical stability, and relatively high columbic efficiency by taking advantage of the synergistic effects of the microporous carbon from ZIF-8 and a highly interconnected graphene network. Our results demonstrate that a porous MOF-derived scaffold with a wrapped graphene conductive network structure is a potentially efficient design for a battery electrode that can meet the challenge arising from low conductivity and volume change.
- Top Cited PapersOpen Access
- 4 August 2014
- Published by Royal Society of Chemistry (RSC) in Energy & Environmental Science
- Vol. 7 (10) , 3223-3263
Black silicon: fabrication methods, properties and solar energy applications
Black silicon (BSi) represents a very active research area in renewable energy materials. The rise of BSi as a focus of study for its fundamental properties and potentially lucrative practical applications is shown by several recent results ranging from solar cells and light-emitting devices to antibacterial coatings and gas-sensors. In this paper, the common BSi fabrication techniques are first reviewed, including electrochemical HF etching, stain etching, metal-assisted chemical etching, reactive ion etching, laser irradiation and the molten salt Fray-Farthing-Chen-Cambridge (FFC-Cambridge) process. The utilization of BSi as an anti-reflection coating in solar cells is then critically examined and appraised, based upon strategies towards higher efficiency renewable solar energy modules. Methods of incorporating BSi in advanced solar cell architectures and the production of ultra-thin and flexible BSi wafers are also surveyed. Particular attention is given to routes leading to passivated BSi surfaces, which are essential for improving the electrical properties of any devices incorporating BSi, with a special focus on atomic layer deposition of Al2O3. Finally, three potential research directions worth exploring for practical solar cell applications are highlighted, namely, encapsulation effects, the development of micro-nano dual-scale BSi, and the incorporation of BSi into thin solar cells. It is intended that this paper will serve as a useful introduction to this novel material and its properties, and provide a general overview of recent progress in research currently being undertaken for renewable energy applications.
- 4 August 2014
- Published by Royal Society of Chemistry (RSC) in Energy & Environmental Science
- Vol. 7 (10) , 3223-3263
Top Cited PapersOpen AccessBlack silicon: fabrication methods, properties and solar energy applications
Black silicon (BSi) represents a very active research area in renewable energy materials. The rise of BSi as a focus of study for its fundamental properties and potentially lucrative practical applications is shown by several recent results ranging from solar cells and light-emitting devices to antibacterial coatings and gas-sensors. In this paper, the common BSi fabrication techniques are first reviewed, including electrochemical HF etching, stain etching, metal-assisted chemical etching, reactive ion etching, laser irradiation and the molten salt Fray-Farthing-Chen-Cambridge (FFC-Cambridge) process. The utilization of BSi as an anti-reflection coating in solar cells is then critically examined and appraised, based upon strategies towards higher efficiency renewable solar energy modules. Methods of incorporating BSi in advanced solar cell architectures and the production of ultra-thin and flexible BSi wafers are also surveyed. Particular attention is given to routes leading to passivated BSi surfaces, which are essential for improving the electrical properties of any devices incorporating BSi, with a special focus on atomic layer deposition of Al2O3. Finally, three potential research directions worth exploring for practical solar cell applications are highlighted, namely, encapsulation effects, the development of micro-nano dual-scale BSi, and the incorporation of BSi into thin solar cells. It is intended that this paper will serve as a useful introduction to this novel material and its properties, and provide a general overview of recent progress in research currently being undertaken for renewable energy applications.
- Open Access
- 18 February 2014
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 16 (12) , 5817-5823
Amine-terminated nanoparticle films: pattern deposition by a simple nanostencilling technique and stability studies under X-ray irradiation
Thin films made up of arrays of amine-terminated silicon nanoparticles (NH2-SiNPs) synthesized by a new evaporation technique have been formed by employing TEM grids as nanostencils. FTIR imaging illustrates the feasibility of the method in nanoscale device fabrication applications. Micro-mapping over areas of the nanoparticle material allows the surface chemistry to be examined. FTIR imaging shows trace amounts of oxide confined to the NP surfaces. Thicker films formed by dropcasting allowed the nanoparticle behaviour to be studied under conditions of extended exposure to 150 eV photons radiation by X-ray photoelectron spectroscopy (XPS). The XPS spectrum was monitored over the Si2p region and the initial peak at 100.53 eV was observed to shift to higher binding energies as irradiation progressed which is indicative of charge trapping within the film. This result has potential consequences for applications where NH2-SiNPs are used in X-ray environments such as in bioimaging where the increasing charge buildup is related to enhanced cytotoxicity.
- 18 February 2014
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 16 (12) , 5817-5823
Open AccessAmine-terminated nanoparticle films: pattern deposition by a simple nanostencilling technique and stability studies under X-ray irradiation
Thin films made up of arrays of amine-terminated silicon nanoparticles (NH2-SiNPs) synthesized by a new evaporation technique have been formed by employing TEM grids as nanostencils. FTIR imaging illustrates the feasibility of the method in nanoscale device fabrication applications. Micro-mapping over areas of the nanoparticle material allows the surface chemistry to be examined. FTIR imaging shows trace amounts of oxide confined to the NP surfaces. Thicker films formed by dropcasting allowed the nanoparticle behaviour to be studied under conditions of extended exposure to 150 eV photons radiation by X-ray photoelectron spectroscopy (XPS). The XPS spectrum was monitored over the Si2p region and the initial peak at 100.53 eV was observed to shift to higher binding energies as irradiation progressed which is indicative of charge trapping within the film. This result has potential consequences for applications where NH2-SiNPs are used in X-ray environments such as in bioimaging where the increasing charge buildup is related to enhanced cytotoxicity.
- 11 February 2014
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 4 (22) , 11430-11437
Hedgehog-like hierarchical ZnO needle-clusters with superior electron transfer kinetics for dye-sensitized solar cells
Hedgehog-like hierarchical ZnO needle-clusters, three-dimensional (3-D) ZnO flowers and one-dimensional (1-D) ZnO needles have been synthesised via a facile hydrothermal method. These samples with different morphologies and microstructures were used to fabricate photoelectrodes for dye-sensitized solar cells (DSSCs). Out of the three samples, current–voltage (I–V) curve measurements show that DSSCs with hedgehog-like ZnO needle-clusters display the best photoelectrochemical performance which can be attributed to enhanced light harvesting and faster reaction kinetics resulting from the unique morphology. The UV-vis absorption and diffused reflectance spectra indicate that hedgehog-like ZnO needle-clusters show higher light harvesting abilities due to high UV absorption, stronger light scattering, as well as a high surface area. Electrochemical impedance spectroscopy (EIS), intensity-modulated photocurrent spectroscopy (IMPS), and intensity-modulated voltage spectroscopy (IMVS) further demonstrate that hedgehog-like ZnO needle-clusters provide superior electron transfer kinetics: fast electron transfer and long electron lifetimes with suppressed recombination. The ZnO needle-clusters obtained not only provide a 3-D matrix but also avoid extensive grain boundary formation. The discoveries from this work are important for the design of efficient photoanode materials with optimum structures for DSSCs.
- 11 February 2014
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 4 (22) , 11430-11437
Hedgehog-like hierarchical ZnO needle-clusters with superior electron transfer kinetics for dye-sensitized solar cells
Hedgehog-like hierarchical ZnO needle-clusters, three-dimensional (3-D) ZnO flowers and one-dimensional (1-D) ZnO needles have been synthesised via a facile hydrothermal method. These samples with different morphologies and microstructures were used to fabricate photoelectrodes for dye-sensitized solar cells (DSSCs). Out of the three samples, current–voltage (I–V) curve measurements show that DSSCs with hedgehog-like ZnO needle-clusters display the best photoelectrochemical performance which can be attributed to enhanced light harvesting and faster reaction kinetics resulting from the unique morphology. The UV-vis absorption and diffused reflectance spectra indicate that hedgehog-like ZnO needle-clusters show higher light harvesting abilities due to high UV absorption, stronger light scattering, as well as a high surface area. Electrochemical impedance spectroscopy (EIS), intensity-modulated photocurrent spectroscopy (IMPS), and intensity-modulated voltage spectroscopy (IMVS) further demonstrate that hedgehog-like ZnO needle-clusters provide superior electron transfer kinetics: fast electron transfer and long electron lifetimes with suppressed recombination. The ZnO needle-clusters obtained not only provide a 3-D matrix but also avoid extensive grain boundary formation. The discoveries from this work are important for the design of efficient photoanode materials with optimum structures for DSSCs.