TZTao Zhang

Tao Zhang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Tao Zhang has a total of 57 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Research on multi-objective optimization of permanent mag-net brushless dc motors based on a grouped surrogate model with parameter correlation

    by Xiaoting Ye, Run Sun, Qi Zeng, Tao Zhang

    To mitigate cogging torque and torque ripple while enhancing electromagnetic torque in permanent magnet brushless DC motors (PMBLDCM), this paper explores a multi-objective optimization strategy utilizing a parameter correlation-based grouped surrogate model. Initially, an orthogonal experimental design integrated with Spearman's rank correlation coefficient is utilized to analyze, sift, and categorize the stator and rotor parameters. Subsequently, a holistic optimization strategy leveraging the Kriging surrogate model, a multi-objective particle swarm optimization algorithm, and the Technique for Order Preference by Similarity to Ideal Solution (TOPSIS) is implemented for global optimization of the highly correlated parameters. Next, for parameters with low correlation, the entropy weight technique is applied to assign objective weights, and a polynomial response surface surrogate model is developed, followed by local optimization via a nonlinear sequential quadratic programming algorithm with gradient-based optimization. Ultimately, a comparative evaluation of the electromagnetic performance is performed, contrasting the optimized motor against the original design. The outcomes demonstrate a 7.6% enhancement in electromagnetic torque following the multi-objective optimization with the parameter correlation-based grouped surrogate model, alongside a 23% and 16% reduction in torque ripple and cogging torque.

  • Open Access

    A sensorless control scheme based on fractional order super-twisting algorithm and improved FLL for PMSM

    by Liqun Huangfu, Cen Chen, Tao Zhang

    To further improve the accuracy of sensorless control at medium and high speeds for permanent magnet synchronous motor (PMSM) and expand its applicability, this paper proposes a new scheme that uses a sliding mode observer and a frequency-locked loop (FLL) for control. The combination of the super-twisting algorithm (STA) and fractional calculus algorithm (FCA) is applied to the observer, which improves the convergence speed and accuracy. In response to the limitations of phase-locked loops (PLLs), a second-order generalized integral frequency-locked loop (SOGI-FLL) is introduced into the control system to be compounded to form a novel control system with compensation, which filters the signal while achieving accurate tracking of rotor position information. Finally, a series of experiments were conducted to compare the performance of the proposed control scheme with conventional control schemes. The superiority and feasibility of the sensorless control scheme were verified through experimental results on a permanent magnet synchronous motor platform.


  • Open Access

    A modified model predictive current control of SRMs for torque ripple suppression

    by Liqun Huangfu, Chen Cen, Tao Zhang

    In this paper, the model predictive current control (MPCC) is proposed to reduce the torque ripple of a switched reluctance motor by realizing precise current tracking. The Linear Quadratic Regulator (LQR) is employed to establish the cost functions of MPCC, which can select optimal control variables. Besides, the Kalman filter is employed to estimate the system state to reduce the influence of disturbance. In addition, the PI controller is replaced by automatic disturbance rejection control (ADRC) to further improve the robustness of the system. Finally, experimental results are shown to verify the effectiveness regarding distinguished tracking performance, dynamic response, and robustness of the proposed MPCC. It can be found that the improved MPCC proposed in this paper can achieve lower torque ripple, distinguished current tracking performance, and dynamic response performance.


  • Open Access

    Repetitive Control for Vibration Suppression of Bearingless Induction Motor

    by Xiaoting Ye, Xiao Tang, Kun Xing, Haoran Wang, Junyong Yao, Tao Zhang

    In order to effectively suppress rotor periodic synchronous vibration caused by the rotor mass eccentricity and sensor detection error of bearingless induction motor (BIM), a rotor vibration suppression control strategy with improved repetitive control is proposed based on the analysis of the problems existing in the traditional repetitive control. On the basis of the vector control model of the BIM system, a simplified suspension control model is derived. The fractional delay filter is used to optimize the repetitive control internal model. Furthermore, for enhancing the stability of the BIM control system, the design method of the repetitive control compensators in high-, middle- and low-frequency region is given in detail. The simulation and experimental results show that the vibration suppression control strategy with the improved repetitive control can effectively suppress the vibration of the rotor in steady state and improve the suspension accuracy of the BIM.


  • Open Access

    Improved model predictive control of permanent magnet synchronous motor based on lumped disturbance compensation

    by Liqun Huangfu, Chen Cen, Tao Zhang

    This paper proposes an improved finite control set model predictive current control (FCS-MPC) for permanent magnet synchronous motor (PMSM), including the use of a sliding mode observer for full electromagnetic parameter disturbance compensation and duty cycle control. First, a PMSM prediction model containing lumped disturbances was established. Second, a sliding mode observer is designed to estimate the lumped perturbation and compensate it to the reference voltage. The reference voltage is obtained based on the deadbeat principle and requires further constraints to obtain the optimal basic voltage vector. Then, a voltage-based cost function is constructed to calculate the duration of the non-zero optimal voltage vector and output the amplitude of the duty cycle adjustment voltage. Finally, experiments verify the effectiveness of the proposed FCS-MPC in improving robustness and steady-state performance.


  • Open Access

    Modeling and Design of a Novel 5-DOF AC–DC Hybrid Magnetic Bearing

    by Xiaoting Ye, Yiming Yan, Chunlai Jia, Tao Zhang

    This paper investigates a novel integrated AC–DC hybrid magnetic bearing (HMB) to reduce the volume, weight, manufacturing, and operation cost of magnetic suspension motors. Two radial MBs and an axial MB are integrated with the proposed HMB. The five-degree-of-freedom (5-DOF) suspension is realized in one unit. Two axially polarized permanent magnets provide the radial and axial bias fluxes. First, the HMB structure and the suspension mechanism are introduced. Second, based on the method of equivalent magnetic circuits, magnetic circuits are calculated. The mathematical models of suspension force are discussed. Third, the main parameters of the 5-DOF AC–DC HMB are given. The 3D finite element method (FEM) is adopted to analyze the proposed system’s electromagnetic characteristics, and the suspension mechanism of the 5-DOF is verified. The radial suspension forces versus the radial control current, the axial suspension forces versus the axial control current, the relationship between the axial suspension force and the axial control current with the X direction offset, and the relationship between the radial suspension force in the X direction and the axial control current with the Z direction offset are calculated. Based on the research results, it is shown that the HMB structure is compact and reasonable, and the mathematical models and suspension mechanism are correct.


  • Open Access

    Design Optimization and Electromagnetic Performance Analysis of an Axial-Flux Permanent Magnet Brushless DC Motor with Unequal-Thickness Magnets

    by Shasha Wu, Baojian Wang, Tao Zhang, Quanhao Gu

    To improve electromagnetic performance, an axial-flux permanent magnet brushless DC motor (AFPMBLDCM) with unequal-thickness arc permanent magnets is proposed in this paper. Firstly, the structure and magnetic circuit of the AFPMBLDCM with unequal-thickness arc permanent magnets were designed. Then, the mathematical models and design method of the main parameters were derived. According to the rated power and rated speed, the main parameters were further designed, and the analytical model was established by using Maxwell 3D. The air-gap flux density, back electromotive force (EMF) and torque under no-load and load conditions were calculated and analyzed to verify the validity of the model and design. Finally, based on a parameter scanning optimization method, the effects of the permanent magnet thickness, pole arc coefficient and permanent magnet radius on cogging torque were analyzed. The optimized parameters of the AFPMBLDCM with unequal-thickness arc permanent magnets were obtained. The results show that the sinusoidal degree of the air-gap magnetic field is improved, and the maximum torque ripple of the AFPMBLDCM is reduced to 2.92%.


  • Design of the Six-Pole Hybrid Magnetic Bearing With Separated Magnetic Circuit to Generate Symmetrical Levitation Force

    by Tao Zhang, Peng Bao

    To solve the problem of generating the different two-degree-of-freedom (two-DOF) maximum levitation forces, a novel six-pole hybrid magnetic bearing (HMB), adopted combined stator and magnetic path structure, and its design method are proposed. Firstly, the configuration of the combined magnetic circuits and levitation principle are introduced. Then, the force-current relationships are derived. Furthermore, according to flux saturation, the permanent magnetic flux density is designed. Moreover, the combined magnetic circuit, force-current curves and design method are calculated and analyzed by Magnet 3D. Finally, the levitation forces are tested. The combined stator, levitation principle, force-current relationship and the design are proved to be correct.


  • Structure and Levitation Force Characteristics Analysis for Novel Radial Hybrid Magnetic Bearing

    by Tao Zhang, Zixin Wang

    A new three-pole AC radial hybrid magnetic bearing (RHMB) is proposed. It has three characteristics of the levitation windings installed in the axial space, the permanent magnet mounted on the rotor and each stator core isolated by nonmagnetic materials. The structure and working principle are firstly introduced. Next, the force-current relationship is derived. According to the design requirement, the electromagnetic parameters are designed. Finally, the magnetic circuits, force-current curves and force coupling performance are calculated and analyzed. Furthermore, the maximum levitation forces are measured. The results show that the structure, magnetic circuit and working principle are correct, and the force-current relationship is further verified.