Surya Nalamati
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Surya Nalamati has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
- Shanthi Iyer
Department of Nanoengineering, Joint School of Nanoscience and Nanoengineering, North Carolina A&T State University, Greensboro, North Carolina 27401, United States
5 shared publications Jia Li
Department of Nanoengineering, Joint School of Nanoscience and Nanoengineering, North Carolina A&T State University, Greensboro, North Carolina 27401, United States
3 shared publications- Manish Sharma
Joint School of Nanoscience and Nanoengineering, North Carolina Agricultural and Technical State University, Greensboro, North Carolina, UNITED STATES
3 shared publications - Prithviraj Deshmukh
Department of Mechanical Engineering, Carnegie Mellon University, Pittsburgh, USA
3 shared publications David Snyder
Penn State Applied Research Laboratory, The Pennsylvania State University, University Park, State College, Pennsylvania 16802, United States
2 shared publicationsRobert Lavelle
Penn State Applied Research Laboratory, The Pennsylvania State University, University Park, State College, Pennsylvania 16802, United States
2 shared publications
Latest Publications
- 27 September 2020
- Published by American Chemical Society (ACS) in ACS Applied Electronic Materials
- Vol. 2 (10) , 3109-3120
Hybrid GaAsSb/GaAs Heterostructure Core–Shell Nanowire/Graphene and Photodetector Applications
- 27 September 2020
- Published by American Chemical Society (ACS) in ACS Applied Electronic Materials
- Vol. 2 (10) , 3109-3120
Hybrid GaAsSb/GaAs Heterostructure Core–Shell Nanowire/Graphene and Photodetector Applications
- 14 October 2019
- Published by IOP Publishing in Nanotechnology
- Vol. 31 (2) , 025205
Space charge limited conduction mechanism in GaAsSb nanowires and the effect of in situ annealing in ultra-high vacuum
In this work, the first observation of the space charge limited conduction mechanism (SCLC) in GaAsSb nanowires (NWs) grown by Ga-assisted molecular beam epitaxial technique, and the effect of ultra-high vacuum in situ annealing have been investigated. The low onset voltage of the SCLC in the NW configuration has been advantageously exploited to extract trap density and trap distribution in the bandgap of this material system, using simple temperature dependent current–voltage measurements in both the ensemble and single nanowires. In situ annealing in ultra-high vacuum revealed significant reduction in the trap density from 10 16 cm −3 in as-grown NWs to a low level of 7 × 10 14 cm −3 and confining wider trap distribution to a single trap depth at 0.12 eV. A comparison of current conduction mechanism in the respective single nanowires using conductive atomic force microscopy (C-AFM) further confirms the SCLC mechanism identified in GaAsSb ensemble device to be intrinsic. Higher current observed in current mapping by C-AFM, increased 4 K photoluminescence (PL) intensity along with reduced full-width half maxima and more symmetric PL spectra, and reduced asymmetrical broadening with increased TO/LO mode in room temperature Raman spectra for in situ annealed NWs again attest to effective annihilation of traps leading to the improved optical quality of NWs compared to as-grown NWs. Hence, the I – V – T analysis of the SCLC mechanism has been demonstrated as a simple approach to obtain information on growth induced traps in the NWs.
- 14 October 2019
- Published by IOP Publishing in Nanotechnology
- Vol. 31 (2) , 025205
Space charge limited conduction mechanism in GaAsSb nanowires and the effect of in situ annealing in ultra-high vacuum
In this work, the first observation of the space charge limited conduction mechanism (SCLC) in GaAsSb nanowires (NWs) grown by Ga-assisted molecular beam epitaxial technique, and the effect of ultra-high vacuum in situ annealing have been investigated. The low onset voltage of the SCLC in the NW configuration has been advantageously exploited to extract trap density and trap distribution in the bandgap of this material system, using simple temperature dependent current–voltage measurements in both the ensemble and single nanowires. In situ annealing in ultra-high vacuum revealed significant reduction in the trap density from 10 16 cm −3 in as-grown NWs to a low level of 7 × 10 14 cm −3 and confining wider trap distribution to a single trap depth at 0.12 eV. A comparison of current conduction mechanism in the respective single nanowires using conductive atomic force microscopy (C-AFM) further confirms the SCLC mechanism identified in GaAsSb ensemble device to be intrinsic. Higher current observed in current mapping by C-AFM, increased 4 K photoluminescence (PL) intensity along with reduced full-width half maxima and more symmetric PL spectra, and reduced asymmetrical broadening with increased TO/LO mode in room temperature Raman spectra for in situ annealed NWs again attest to effective annihilation of traps leading to the improved optical quality of NWs compared to as-grown NWs. Hence, the I – V – T analysis of the SCLC mechanism has been demonstrated as a simple approach to obtain information on growth induced traps in the NWs.
- 31 May 2019
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 2 (7) , 4528-4537
A Study of GaAs1–xSbx Axial Nanowires Grown on Monolayer Graphene by Ga-Assisted Molecular Beam Epitaxy for Flexible Near-Infrared Photodetectors
- 31 May 2019
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 2 (7) , 4528-4537
A Study of GaAs1–xSbx Axial Nanowires Grown on Monolayer Graphene by Ga-Assisted Molecular Beam Epitaxy for Flexible Near-Infrared Photodetectors
- 16 April 2019
- Published by IOP Publishing in Nanotechnology
- Vol. 30 (27) , 275203
Molecular beam epitaxial growth of GaAsSb/GaAsSbN/GaAlAs core-multishell nanowires for near-infrared applications
We report on the bandgap engineering of the GaAsSb/GaAsSbN heterostructured nanowires (NWs) in the core–shell architecture using the unique properties of dilute nitride material system for near-infrared photodetection. A high density of vertical GaAsSb/GaAsSb(N)/GaAlAs core-multishell configured NWs with well faceted, smooth surface morphology has been grown on Si (111) substrates using Ga-assisted molecular beam epitaxy. A low Sb content GaAsSb core has been shown to enable the coherently strained growth of dilute nitride shell with higher Sb content in GaAsSbN shell NWs. A systematic study of N and V/III beam equivalent pressure ratios is carried out to achieve the large band-gap reduction, while successfully incorporating higher Sb content in the dilute nitride shells (GaAs 1− x Sb x N; x = 0.27). The incorporation of N acts to relieve strain and provide a smooth surface morphology as well as redshift the 4K photoluminescence (PL) peak energy by ∼160 meV in comparison to a non-nitride shell. The selected area diffraction pattern confirms zinc-blende structure in all the NWs and did not show any noticeable planar defects in dilute nitride NWs. We successfully, thus demonstrate GaAsSb/GaAsSbN/GaAlAs core–shell NWs by engineering the lattice strain of nitride shell with the non-nitride ternary core, for extending the 4K photoemission up to 1.43 μ m.
- 16 April 2019
- Published by IOP Publishing in Nanotechnology
- Vol. 30 (27) , 275203
Molecular beam epitaxial growth of GaAsSb/GaAsSbN/GaAlAs core-multishell nanowires for near-infrared applications
We report on the bandgap engineering of the GaAsSb/GaAsSbN heterostructured nanowires (NWs) in the core–shell architecture using the unique properties of dilute nitride material system for near-infrared photodetection. A high density of vertical GaAsSb/GaAsSb(N)/GaAlAs core-multishell configured NWs with well faceted, smooth surface morphology has been grown on Si (111) substrates using Ga-assisted molecular beam epitaxy. A low Sb content GaAsSb core has been shown to enable the coherently strained growth of dilute nitride shell with higher Sb content in GaAsSbN shell NWs. A systematic study of N and V/III beam equivalent pressure ratios is carried out to achieve the large band-gap reduction, while successfully incorporating higher Sb content in the dilute nitride shells (GaAs 1− x Sb x N; x = 0.27). The incorporation of N acts to relieve strain and provide a smooth surface morphology as well as redshift the 4K photoluminescence (PL) peak energy by ∼160 meV in comparison to a non-nitride shell. The selected area diffraction pattern confirms zinc-blende structure in all the NWs and did not show any noticeable planar defects in dilute nitride NWs. We successfully, thus demonstrate GaAsSb/GaAsSbN/GaAlAs core–shell NWs by engineering the lattice strain of nitride shell with the non-nitride ternary core, for extending the 4K photoemission up to 1.43 μ m.
- 25 October 2018
- Published by IOP Publishing in Semiconductor Science and Technology
- Vol. 33 (12) , 125007
Molecular beam epitaxial growth of high quality Ga-catalyzed GaAs 1– x Sb x ( x > 0.8) nanowires on Si (111) with photoluminescence emission reaching 1.7 μ m
The advancement of ternary GaAsSb mismatched alloy system toward the Sb-rich corner of the phase diagram in the nanowire (NW) configuration on silicon remains a challenge. A large lattice mismatch between the silicon substrate and GaAsSb with an Sb-rich composition, along with the low supersaturation and low solubility of Sb in the Ga droplet in the vapor–liquid–solid growth mechanism, causes significant issues during Ga-assisted molecular beam epitaxial growth of these NWs. In this work, we have carried out a systematic study of Sb-rich GaAs 1– x Sb x NWs grown on Si (111) using variations of the Ga, As, and Sb beam equivalent pressures (BEP) to minimize undesirable parasitic growth and achieve photoemission up to 1.7 μ m. Ga-assisted molecular beam epitaxy is the enabling growth technology for the growth of these self-catalyzed GaAs 1– x Sb x ( x > 0.8) NWs. The use of a dual substrate temperature approach along with low As background pressure and a low Ga BEP were found to be the key growth components in achieving a well-faceted NW morphology with a low parasitic layer on the substrate. Energy-dispersive x-ray spectroscopy analysis confirms uniform compositional homogeneity along the NWs, while selected-area electron diffraction patterns in the transmission electron microscope revealed a zinc-blende crystal structure. A peak μ -photoluminescence emission of 1680 nm with a narrow FWHM was obtained at 4 K. Raman spectra at room temperature exhibit only GaSb related LO and TO modes, which attest to the high quality of the NWs grown. This is a promising approach due to the broad scope of applicability to grow other mismatched alloy material systems in a NW configuration.
- 25 October 2018
- Published by IOP Publishing in Semiconductor Science and Technology
- Vol. 33 (12) , 125007
Molecular beam epitaxial growth of high quality Ga-catalyzed GaAs 1– x Sb x ( x > 0.8) nanowires on Si (111) with photoluminescence emission reaching 1.7 μ m
The advancement of ternary GaAsSb mismatched alloy system toward the Sb-rich corner of the phase diagram in the nanowire (NW) configuration on silicon remains a challenge. A large lattice mismatch between the silicon substrate and GaAsSb with an Sb-rich composition, along with the low supersaturation and low solubility of Sb in the Ga droplet in the vapor–liquid–solid growth mechanism, causes significant issues during Ga-assisted molecular beam epitaxial growth of these NWs. In this work, we have carried out a systematic study of Sb-rich GaAs 1– x Sb x NWs grown on Si (111) using variations of the Ga, As, and Sb beam equivalent pressures (BEP) to minimize undesirable parasitic growth and achieve photoemission up to 1.7 μ m. Ga-assisted molecular beam epitaxy is the enabling growth technology for the growth of these self-catalyzed GaAs 1– x Sb x ( x > 0.8) NWs. The use of a dual substrate temperature approach along with low As background pressure and a low Ga BEP were found to be the key growth components in achieving a well-faceted NW morphology with a low parasitic layer on the substrate. Energy-dispersive x-ray spectroscopy analysis confirms uniform compositional homogeneity along the NWs, while selected-area electron diffraction patterns in the transmission electron microscope revealed a zinc-blende crystal structure. A peak μ -photoluminescence emission of 1680 nm with a narrow FWHM was obtained at 4 K. Raman spectra at room temperature exhibit only GaSb related LO and TO modes, which attest to the high quality of the NWs grown. This is a promising approach due to the broad scope of applicability to grow other mismatched alloy material systems in a NW configuration.