Giovanni Leonardi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Research Interests
Giovanni Leonardi has a total of 48 co-authors. Here are the top co-authors by number of shared publications:
Michele Buonsanti
University of Reggio Calabria
17 shared publications- Francis Cirianni
Department of Civil, Environmental and Mechanical Engineering, University Mediterranea, 89100 Reggio Calabria, Italy
15 shared publications Rocco Palamara
DICEAM Department, University of Reggio Calabria, Via Graziella, Loc. Feo di Vito, 89122 Reggio Calabria, Italy
9 shared publicationsFrancesco Scopelliti
University of Reggio Calabria
8 shared publicationsFederica Suraci
DICEAM, University Mediterranea of Reggio Calabria Via Graziella, Feo di Vito, 89100 Reggio Calabria, Italy
6 shared publicationsFrancesco Scoppelliti
MECMAT University of Reggio Calabria
5 shared publications
Latest Publications
- 28 June 2025
- Published by Springer Nature
- p. 407-419
Comprehensive Railway Track Monitoring Using Unmanned Aerial Systems (UASs) and Building Information Modeling (BIM)
- 28 June 2025
- Published by Springer Nature
- p. 407-419
Comprehensive Railway Track Monitoring Using Unmanned Aerial Systems (UASs) and Building Information Modeling (BIM)
- Open Access
- 26 July 2024
- Published by Springer Nature
- p. 233-244
Framework for Life Cycle Railway Sustainability Assessment: A Methodological Approach Based on Advanced Methods and Tools
Railway corridors improvement and development are the most appropriate answer to the need of providing sustainable transportation of people and goods. Indeed, rail is the greener transportation mode since it contributes to the reduction of carbon footprint and energy consumption within the global transportation system. From this perspective, continuing to pursue sustainability objectives, any intervention on railway lines and particularly on track must be focused on the use of materials, components, and techniques able to guarantee the best environmental performances in service life span, also according to Agenda 2030 goal 13 action climate. To this purpose, the decision process at any life stage of construction and maintenance of the track can be supported by advanced methods and tools able to correctly address the right solutions through the quantitative assessment of the related environmental burdens. This study delivers a framework of methods and tools in use for the assessment of the sustainability. An application to a case study is also reported and discussed. Results demonstrated that there is room for the enhancement of environmental behavior of the track during its life cycle by means the suitable selection of materials and techniques for construction and maintenance. Further, the proposed methods have a great potential to support decision-makers.
- 26 July 2024
- Published by Springer Nature
- p. 233-244
Open AccessFramework for Life Cycle Railway Sustainability Assessment: A Methodological Approach Based on Advanced Methods and Tools
Railway corridors improvement and development are the most appropriate answer to the need of providing sustainable transportation of people and goods. Indeed, rail is the greener transportation mode since it contributes to the reduction of carbon footprint and energy consumption within the global transportation system. From this perspective, continuing to pursue sustainability objectives, any intervention on railway lines and particularly on track must be focused on the use of materials, components, and techniques able to guarantee the best environmental performances in service life span, also according to Agenda 2030 goal 13 action climate. To this purpose, the decision process at any life stage of construction and maintenance of the track can be supported by advanced methods and tools able to correctly address the right solutions through the quantitative assessment of the related environmental burdens. This study delivers a framework of methods and tools in use for the assessment of the sustainability. An application to a case study is also reported and discussed. Results demonstrated that there is room for the enhancement of environmental behavior of the track during its life cycle by means the suitable selection of materials and techniques for construction and maintenance. Further, the proposed methods have a great potential to support decision-makers.
- Open Access
- 1 January 2023
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2928 (1)
Numerical modeling of a reinforced railway superstructure
Geosynthetics are widely used in the mechanical stabilization of railway infrastructures with a weak subgrade. The use of geosynthetics placed inside the ballast layer or between the foundation layer and the ballast, has demonstrated advantages in reducing displacements and extending the life of the superstructure. In this study, a two-dimensional finite element model was developed, using ABAQUS software, to investigate the behavior of a non-reinforced system and one reinforced with geosynthetics. The aim of the study was the evaluation of the reinforcement contribution offered by the geogrid in the displacements reduction under traffic cyclical loads.
- 1 January 2023
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2928 (1)
Open AccessNumerical modeling of a reinforced railway superstructure
Geosynthetics are widely used in the mechanical stabilization of railway infrastructures with a weak subgrade. The use of geosynthetics placed inside the ballast layer or between the foundation layer and the ballast, has demonstrated advantages in reducing displacements and extending the life of the superstructure. In this study, a two-dimensional finite element model was developed, using ABAQUS software, to investigate the behavior of a non-reinforced system and one reinforced with geosynthetics. The aim of the study was the evaluation of the reinforcement contribution offered by the geogrid in the displacements reduction under traffic cyclical loads.
- 25 August 2022
- Published by Springer Nature
- p. 377-383
Optimization of Local Road Network Quality
- 25 August 2022
- Published by Springer Nature
- p. 356-362
Accessibility and Internal Areas - Rural Towns of Calabria and the Local Road Network
- 25 August 2022
- Published by Springer Nature
- p. 356-362
Accessibility and Internal Areas - Rural Towns of Calabria and the Local Road Network
- Open Access
- 7 May 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (9) , 4707
GIS-Multicriteria Analysis Using AHP to Evaluate the Landslide Risk in Road Lifelines
The present paper proposes a new methodology to characterize the landslide susceptibility of the Reggio Calabria metropolitan area. For this purpose, various factors were used, such as land use, slope, rainfall, elevation, lithology, distance from roads and rivers, and thanks to the use of GIS devices and the AHP method, the landslide risk was defined for the whole territory. The values obtained were classified into four categories: low, moderate, high, and very high. They were then exported into the GIS environment to produce a landslide susceptibility map. The study carried out demonstrates the fragility of the Calabrian territory. From the results obtained, in fact, 66% of the metropolitan territory of Reggio Calabria appears to have a medium–high landslide risk.
- 7 May 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (9) , 4707
Open AccessGIS-Multicriteria Analysis Using AHP to Evaluate the Landslide Risk in Road Lifelines
The present paper proposes a new methodology to characterize the landslide susceptibility of the Reggio Calabria metropolitan area. For this purpose, various factors were used, such as land use, slope, rainfall, elevation, lithology, distance from roads and rivers, and thanks to the use of GIS devices and the AHP method, the landslide risk was defined for the whole territory. The values obtained were classified into four categories: low, moderate, high, and very high. They were then exported into the GIS environment to produce a landslide susceptibility map. The study carried out demonstrates the fragility of the Calabrian territory. From the results obtained, in fact, 66% of the metropolitan territory of Reggio Calabria appears to have a medium–high landslide risk.
- Open Access
- 21 March 2022
- Published by MDPI AG in Sustainability
- Vol. 14 (6)
A 3D-FE Model for the Rutting Prediction in Geogrid Reinforced Flexible Pavements
Permanent deformation (rutting) is an important disturbing failure on flexible road pavements. This phenomenon appears on the flexible pavement as longitudinal depressions, and it is a consequence of the degradation of materials under high traffic loading based on consolidation/densification, surface wear, plastic/shear flow, and mechanical deformation. Hence, the rutting phenomenon depends on the accumulation of permanent deformations on pavement surfaces subjected to repeated wheel loads. In recent years, several studies have confirmed that the service life of asphalt pavements can be increased by using geosynthetics between or within layers because of the improved mechanical properties. The aim of this paper is to present the results of the 3D-finite element (FE) simulations and the development of the rutting phenomenon in a traditional flexible pavement and a reinforced one, both subjected to a cyclic load. Through Abaqus/CAE software, a road section reinforced by a geogrid was analyzed and compared with a traditional road section to investigate the advantages given by the geosynthetic completely embedded at two-thirds of the asphalt concrete layer (AC) in terms of permanent deformations. The results show the capability of the proposed FE study, that uses the plasticity model of Drucker-Prager for unbound materials combined with the simple creep law to model HMA layers to predict the permanent deformation distribution.
- 21 March 2022
- Published by MDPI AG in Sustainability
- Vol. 14 (6)
Open AccessA 3D-FE Model for the Rutting Prediction in Geogrid Reinforced Flexible Pavements
Permanent deformation (rutting) is an important disturbing failure on flexible road pavements. This phenomenon appears on the flexible pavement as longitudinal depressions, and it is a consequence of the degradation of materials under high traffic loading based on consolidation/densification, surface wear, plastic/shear flow, and mechanical deformation. Hence, the rutting phenomenon depends on the accumulation of permanent deformations on pavement surfaces subjected to repeated wheel loads. In recent years, several studies have confirmed that the service life of asphalt pavements can be increased by using geosynthetics between or within layers because of the improved mechanical properties. The aim of this paper is to present the results of the 3D-finite element (FE) simulations and the development of the rutting phenomenon in a traditional flexible pavement and a reinforced one, both subjected to a cyclic load. Through Abaqus/CAE software, a road section reinforced by a geogrid was analyzed and compared with a traditional road section to investigate the advantages given by the geosynthetic completely embedded at two-thirds of the asphalt concrete layer (AC) in terms of permanent deformations. The results show the capability of the proposed FE study, that uses the plasticity model of Drucker-Prager for unbound materials combined with the simple creep law to model HMA layers to predict the permanent deformation distribution.
- 1 September 2020
- Published by Springer Nature
- p. 1500-1510
Environmental Impact of Maintenance Operations: The Comparison Between Traditional and Geogrid-Reinforced Roads
- 1 September 2020
- Published by Springer Nature
- p. 1500-1510
Environmental Impact of Maintenance Operations: The Comparison Between Traditional and Geogrid-Reinforced Roads