DFDenilson Vasconcelos Freitas

Denilson Vasconcelos Freitas

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Denilson Vasconcelos Freitas has a total of 143 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Thiol derivatives and CdTe quantum dots as larvicides and biomarkers against the yellow fever mosquito Aedes aegypti

    by Denilson V. Freitas, Camila S. Lira-Pimentel, Camila C.L. Arruda, Júlio C.R.O.F. Aguiar, Dayane S. Marques, Daniela M.A.F. Navarro, Marcelo Navarro

  • Open Access

    Aqueous glutathione-capped Bi2S3-GSH nanocrystals: Electrosynthesis and biological toxicity assessment

    by Marcos Vinícius Cosme, Palloma Lima de Oliveira, Camila Caroline Lopes Arruda, Niédja Fittipaldi Vasconcelos, Marcelo Navarro, Ana Maria Benko-Iseppon, Denilson de Vasconcelos Freitas, Ana Christina Brasileiro-Vidal

  • Open Access

    Synergistic Effects of CdTe Quantum Dots and Nb 2 O 5 Nanostructures for Enhanced Photocatalytic Hydrogen Generation

    by Andreia Rocha Canella Bezerra Carneiro, Denilson Vasconcelos Freitas, Felipe L. N. Sousa, Anderson J. Caires, Igor Coelho, Fernando Stavale, Leandro Arruda, Giovanna Machado, Rosa Maria Rabelo Junqueira


  • Open Access

    Boosting Hydrogen Evolution Kinetics with MoS 2 -Decorated TiO 2 Nanotubes

    by Leonardo J. L. Maciel, Denilson V. Freitas, Felipe L. N. Sousa, Luana B. C. Oliveira, Otávio A. L. Alves, Francisco de A.S. Ribeiro, Giovanna Machado

    The development of efficient and durable nonplatinum-based electrocatalysts for the hydrogen evolution reaction (HER) remains a key challenge. This study explores the heterojunction between titanium dioxide nanotubes (TiO2 NTs) and molybdenum disulfide quantum dots (MoS2 QDs) as a viable alternative to platinum-based HER electrocatalysts. TiO2 NTs were synthesized via anodization, while MoS2 QDs were electrosynthesized chronopotentiometrically, followed by heterojunction formation via immersion/adsorption. The optimized TiO2 NTs/MoS2 QDs electrocatalyst exhibited significantly enhanced HER activity, achieving an overpotential of 617 mV at 100 mA cm−2 (η100), a notable improvement over 927 mV observed for bare TiO2 NTs. Electrochemical impedance spectroscopy (EIS) revealed a dramatic reduction in charge transfer resistance from 475 to 9.9 Ω after MoS2 QDs deposition. A Tafel slope of 106 mV dec−1 indicated a Volmer−Heyrovsky HER mechanism with second-order kinetics, as confirmed by kinetic modeling. Structural and morphological characterization (XRD, SEM, TEM, and EDX) confirmed the successful heterojunction formation. This work highlights the potential of TiO2 NTs/MoS2 QDs as scalable and efficient electrocatalysts for sustainable hydrogen production, offering a promising alternative to platinum-based systems.


  • Open Access

    Optimization of TiO 2 Nanotubes Anodization Assisted by Response Surface Methodology for Enhanced Photoelectrochemical Performance

    by Francisco A. S. Ribeiro, Denilson V. Freitas, Licarion Pinto, Luana B. C. Oliveira, Leonardo J. L. Maciel, Joanna E. Kulesza, Giovanna Machado

    Green hydrogen production plays a crucial role in the global transition toward sustainable energy sources. In this study, the Response Surface Methodology (RSM) technique was employed to optimize the photoelectrochemical performance of TiO 2 nanotube arrays (TNAs), aiming to maximize the photocurrent density ( J ) and minimize the interfacial electron transfer resistance ( R p ). For this purpose, the Central Composite Design (CCD) method was utilized to systematically evaluate three key parameters: ammonium fluoride concentration, anodization time, and applied potential, resulting in a total of 17 experimental runs. The optimized conditions resulted in longer (4.84 ± 0.10 µm) and well‐ordered TNAs with an aspect ratio of 33.79 ± 3.66. The experimentally obtained photoelectrochemical performance closely matched the predicted values from the experimental design, achieving a J equal to 0.285 ± 0.038 mA cm −2 and R p equal to 5.32 ± 0.32 kΩ. Moreover, the optimized TNAs exhibited superior hydrogen production efficiency, reaching a rate of 283.2 µL cm −2 h −1 , for the optimized condition, which is superior to the other conditions tested preliminarily in the work. The outcomes validate the effectiveness of employing CCD and RSM techniques for enhancing TiO 2 photoanodes, confirming this optimization strategy as a robust and promising approach for advancing clean energy technologies.


  • Antibacterial Activity of ZnBTC‐MOF Combined With Essential Oil From Etlingera elatior and Major Compounds Against Staphylococcus aureus and Escherichia coli

    by Ana Paula P. Lima, Edna B. Lima, Nínive B. Florêncio, Denilson V. Freitas, Brenand A. S. Souza, Norma B. Gusmão, Luciano C. Almeida, Fábio A. Brayner, Luiz Carlos Alves, Gabriel G. A. Gonçalves, et al.

    In this work, an antibacterial material was designed with the incorporation of the essential oil (EO) from Etlingera elatior (Jack) R.M. Smith and its major compounds into a zinc metal–organic framework (MOF), ZnBTC, which was electrochemically synthesized and characterized by x‐ray diffraction (XRD), Fourier transform infrared (FTIR), thermogravimetric analysis (TGA), and scanning electron microscopy (SEM). The composition of the EO was analyzed by gas chromatography (GC) and GC–mass spectrometry (GC–MS). The incorporation of the EO and its major compounds into ZnBTC‐MOF was verified through Brunauer–Emmett–Teller (BET) analysis. The microplate microdilution method was used to assess antibacterial activity. Minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) were determined for all arrangements. Flow cytometry and SEM were carried out to analyze the mechanism of action of the compounds against bacterial cells. The results obtained with the combinations of ZnBTC‐MOF and the EO from E. elatior and its major compounds revealed a synergistic antibacterial effect on Escherichia coli and Staphylococcus aureus, with the enhancement of the individual antibacterial activities of these substances.

  • Evaluation of the toxic and genotoxic effects of exposure of Drosophila melanogaster to the glutathione-capped AgIn5Se8@ZnS nanocrystals

    by Antônio Marcos de Oliveira dos Santos, Danilo Gustavo Rodrigues Silva, Maria Gislaine Pereira, Adrielle Rodrigues Costa, Claudia Rohde, Camila Caroline Lopes Arruda, Antônia Eliene Duarte, Lizandra Ferraz da Silva, Denilson Vasconcelos Freitas, Marcelo Navarro, et al.


  • Influence of Sacrificial Reagents on the Photoelectrocatalytic Performance of Titanium Dioxide Nanotube Arrays for Hydrogen Production

    by Denilson V. Freitas, Wellington S. Ferreira, Francisco A. S. Ribeiro, Luana B. C. Oliveira, Otávio A. L. Alves, Felipe L. N. Sousa, Leonardo J. L. Maciel, Giovanna Machado

    Photoelectrochemical water splitting offers a synergistic method for producing hydrogen using solar energy and an external bias with no emissions. Since the water oxidation process is a limiting factor in the hydrogen production rate, the use of efficient hole scavengers is crucial for enhancing system performance. This study evaluated the performance of titanium dioxide nanotubes (TiO 2 NTs) using different hole scavengers in comparison to sodium sulfate. All the evaluated hole scavengers achieved higher photocurrent densities than sodium sulfate with performance ordered as follows: glycerol > glucose > triethanolamine > methanol > sodium sulfite > ethanol >> sodium sulfate. Regarding the hydrogen production rate, glycerol achieved 0.292 mL cm −2 h −1 , a value 32.5 times higher than that obtained with sodium sulfate (0.009 mL cm −2 h −1 ). Structural characteristics, such as the presence of hydrogen atoms adjacent to alcohol groups ( α ‐H), the carbon‐to‐oxygen atom ratio (C:O), solvent polarizability, and redox potential were fundamental for understanding the role of hole scavengers. These findings validate the enhancement of the photoelectrocatalytic process by hole scavengers, supported by the thermodynamically favorable electron transfers facilitated by organic molecules with higher polarization, a low C:O ratio, and rich presence of α ‐H.


  • EFFECTS OF ALKALI ION DOPING ON MICROSTRUCTURE AND MORPHOLOGY OF RUTILE TITANIUM DIOXIDE THIN FILMS

    by Felipe L. N. Sousa, Lizeth Carolina Mojica-Sánchez, Denilson Vasconcelos Freitas, Larissa G. C. Silva, Iasmin B. Cavalcanti, Luana B. C. Oliveira, Giovanna Machado

    Strategies such as extrinsic doping can improve charge separation and enhance the photocurrent response of semiconductor systems. In this work, the effect of alkali metal (K+, Rb+, and Cs+) doping on rutile TiO2 hierarchical thin films synthesized by a hydrothermal method was evaluated. The bottom-up approach yielded nanorods/spherulites of TiO2 on SnO2:F substrate, under acidic conditions, and the influence of alkali ions was evaluated for doping levels of 2.5 and 5.0%. The materials were characterized by several structural and morphological methods, including XRD (X-ray diffraction), SEM (scanning electron microscopy), TEM-SAED (transmission electron microscopy-selected area electron diffraction), and photoelectrochemical measurements. The XRD confirmed the rutile single phase obtained; however, TiO2 morphology was affected by the incorporation of alkali ions with different ionic radii. SEM images revealed that the spherulites observed for undoped TiO2 were suppressed, and the thickness of the nanorods decreased. TEM-SAED analysis indicated preferential nanorod growth. The photoelectrochemical measurements showed changes in the charge carrier density between the pristine TiO2 to the Cs+ -doped TiO2. Alkali-doped TiO2 shows potential for use as an electroactive component in the hole transporting layer of photovoltaic solar cells.

  • A CuBTC/CuS Photocatalyst for Organic Dyes: Degradation Kinetics and Mechanistic Insights

    by Brenand A. S. Souza, Denilson V. Freitas, Vanessa N. Lima, Cicero I. S. Filho, Giovanna Machado, Marcelo Navarro

    Organic dyes derived from industrial processes have harmful potential to aquatic systems and require novel oxidative treatment. Metal‐organic frameworks (MOF) couple high adsorption capacity and photocatalytic action, which can be improved through heterojunctions. In this work, CuBTC (MOF) photocatalyst was synthesized by an electrochemical methodology, and the in situ CuS templated formation by addition of Na 2 S solution, giving CuBTC/CuS composites. The synthesized CuBTC MOF and CuBTC/CuS composites were characterized by XRD, FTIR, TGA, and EDX. The adsorptive capacity and photocatalytic properties were evaluated by the photocatalytic performance against methylene blue (MB) aqueous solution, under dark and simulated solar irradiation. Under simulated solar irradiation, the CuBTC/CuS achieved 87 % dye photodegradation after 120 min, 1.7 times higher than CuBTC. The photocatalytic action mechanisms were investigated by free‐radical capture experiments. At the equilibrium, the photocatalytic process presented pseudo‐first‐order (PFO) and pseudo‐second‐order (PSO) non‐linear kinetic models, showing a higher correlation with the PFO model, with a rate constant of 94.3×10 −3 min −1 . The photocatalytic performance of the composite was also evaluated over five cycles, decreasing to 68 %. The proposed strategy showed promise for the developing of highly effective materials to combat water pollution.