Antonio Gamba
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Antonio Gamba has a total of 7 co-authors. Here are the top co-authors by number of shared publications:
- Jean-Marc Franssen
Urban and Environmental Engineering (UEE), Liège University, Liège, Belgium
1 shared publication - Jean-Marc Franssen
Université de Liège
1 shared publication - Marion Charlier
ArcelorMittal Steligence Esch/Alzette Luxembourg
1 shared publication - Olivier Vassart
ArcelorMittal Steligence Engineering, L-4221 Esch-sur-Alzette, Luxembourg
1 shared publication - Stephen Welch
School of Engineering, The University of Edinburgh, Edinburgh, United Kingdom
1 shared publication - Thomas Gernay
Johns Hopkins Univ
1 shared publication
Latest Publications
- Open Access
- 12 November 2021
- Published by MDPI AG in Applied Sciences
- Vol. 11 (22) , 10679
GoZone: A Numerical Model for Travelling Fires Based on Cellular Automata Concept
Fires in large compartments tend to burn locally and to move across the floor over a period of time; this particular behaviour has been discovered to challenge the assumption of uniform gas temperature in the fire compartment. Recent studies on fires in large compartments have led to the now widely known concept of “travelling fires”. Several models have been proposed to describe the evolution in time of travelling fires. Although these models represented an innovative step in the field of travelling fires, the major drawbacks of these models can be found in the simplification of fire dynamics (constant spread rate, 1D imposed fire path) and limited field of application (rectangular based geometries). The purpose of this paper is to present a numerical model of travelling fire. The model was based on an improved zone model combined with a cellular automata model. The software GoZone, in which the model was implemented, is intended to be a practical solution to analyse fires in large compartments of potentially any shape. GoZone is aimed to describe the complex dynamics of the fire from ignition to a phase of growing localised fire that may eventually travel in the compartment, possibly followed by a flashover. The main sub models comprising GoZone are presented. A comparison is given with the results of under ventilated fire test 2 of the BST/FSR 1993 test series and with respect to the Veselì travelling fire test is shown. GoZone shows a promising capacity to represent fires in a large compartment in both air and fuel controlled fire conditions.
- 12 November 2021
- Published by MDPI AG in Applied Sciences
- Vol. 11 (22) , 10679
Open AccessGoZone: A Numerical Model for Travelling Fires Based on Cellular Automata Concept
Fires in large compartments tend to burn locally and to move across the floor over a period of time; this particular behaviour has been discovered to challenge the assumption of uniform gas temperature in the fire compartment. Recent studies on fires in large compartments have led to the now widely known concept of “travelling fires”. Several models have been proposed to describe the evolution in time of travelling fires. Although these models represented an innovative step in the field of travelling fires, the major drawbacks of these models can be found in the simplification of fire dynamics (constant spread rate, 1D imposed fire path) and limited field of application (rectangular based geometries). The purpose of this paper is to present a numerical model of travelling fire. The model was based on an improved zone model combined with a cellular automata model. The software GoZone, in which the model was implemented, is intended to be a practical solution to analyse fires in large compartments of potentially any shape. GoZone is aimed to describe the complex dynamics of the fire from ignition to a phase of growing localised fire that may eventually travel in the compartment, possibly followed by a flashover. The main sub models comprising GoZone are presented. A comparison is given with the results of under ventilated fire test 2 of the BST/FSR 1993 test series and with respect to the Veselì travelling fire test is shown. GoZone shows a promising capacity to represent fires in a large compartment in both air and fuel controlled fire conditions.
- 1 September 2021
- Published by Emerald Publishing in Proceedings of the Institution of Civil Engineers - Structures and Buildings
- Vol. 174 (9) , 739-748
Modelling the influence of steel structure compartment geometry on travelling fires
The response of structures exposed to fire is highly dependent on the type of fire that occurs, which is in turn very dependent on the compartment geometry. In a European research project, computational fluid dynamics simulations were carried out to analyse the influence of compartment geometry and the interaction with representative fuel loads to explore the conditions leading to the development of a travelling fire. The influence observed of ceiling height, crib spacing and opening geometry in controlling spread rates tended to confirm the possibility of predicting the occurrence, or not, of a travelling fire. The results of one analysis were then used to perform a non-linear thermo-mechanical analysis of a steel structure. It was possible to use the radiative intensities and gas temperatures obtained with a computational fluid dynamics model to calculate with a finite-element model the temperatures in structural elements located in the compartment, and to evaluate the structural behaviour of a frame made of these elements. This paper therefore highlights the effect of building design specifications on the temperature development and on the resulting mechanical behaviour of a steel structure where the travelling nature of a fire has been considered comprehensively.
- 1 September 2021
- Published by Emerald Publishing in Proceedings of the Institution of Civil Engineers - Structures and Buildings
- Vol. 174 (9) , 739-748
Modelling the influence of steel structure compartment geometry on travelling fires
The response of structures exposed to fire is highly dependent on the type of fire that occurs, which is in turn very dependent on the compartment geometry. In a European research project, computational fluid dynamics simulations were carried out to analyse the influence of compartment geometry and the interaction with representative fuel loads to explore the conditions leading to the development of a travelling fire. The influence observed of ceiling height, crib spacing and opening geometry in controlling spread rates tended to confirm the possibility of predicting the occurrence, or not, of a travelling fire. The results of one analysis were then used to perform a non-linear thermo-mechanical analysis of a steel structure. It was possible to use the radiative intensities and gas temperatures obtained with a computational fluid dynamics model to calculate with a finite-element model the temperatures in structural elements located in the compartment, and to evaluate the structural behaviour of a frame made of these elements. This paper therefore highlights the effect of building design specifications on the temperature development and on the resulting mechanical behaviour of a steel structure where the travelling nature of a fire has been considered comprehensively.
- 1 October 2018
- Published by Elsevier in Engineering Structures
- Vol. 172, 483-496
Progressive collapse triggered by fire induced column loss: Detrimental effect of thermal forces
- 1 October 2018
- Published by Elsevier in Engineering Structures
- Vol. 172, 483-496
Progressive collapse triggered by fire induced column loss: Detrimental effect of thermal forces