ARAbdul-Rahman O. Raji

Abdul-Rahman O. Raji

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Abdul-Rahman O. Raji has a total of 43 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Lithium Batteries with Nearly Maximum Metal Storage

    by Abdul-Rahman O. Raji, Rodrigo Villegas Salvatierra, Nam Dong Kim, Xiujun Fan, Yilun Li, Gladys A. L. Silva, Junwei Sha, James M. Tour

    The drive for significant advancement in battery capacity and energy density inspired a revisit to the use of Li metal anodes. We report the use of a seamless graphene–carbon nanotube (GCNT) electrode to reversibly store Li metal with complete dendrite formation suppression. The GCNT-Li capacity of 3351 mAh g–1GCNT-Li approaches that of bare Li metal (3861 mAh g–1Li), indicating the low contributing mass of GCNT, while yielding a practical areal capacity up to 4 mAh cm–2 and cycle stability. A full battery based on GCNT-Li/sulfurized carbon (SC) is demonstrated with high energy density (752 Wh kg–1 total electrodes, where total electrodes = GCNT-Li + SC + binder), high areal capacity (2 mAh cm–2), and cyclability (80% retention at >500 cycles) and is free of Li polysulfides and dendrites that would cause severe capacity fade.


  • Top Cited Papers

    Direct observation of ion dynamics in supercapacitor electrodes using in situ diffusion NMR spectroscopy

    by Alexander C. Forse, John M. Griffin, Céline Merlet, Javier Carretero-Gonzalez, Abdul-Rahman O. Raji, Nicole M. Trease, Clare P. Grey


  • Open Access

    Rebar Graphene

    by Zheng Yan, Zhiwei Peng, Gilberto Casillas, Jian Lin, Changsheng Xiang, Haiqing Zhou, Yang Yang, Gedeng Ruan, Abdul-Rahman O. Raji, Errol L. G. Samuel, et al.

    As the cylindrical sp2-bonded carbon allotrope, carbon nanotubes (CNTs) have been widely used to reinforce bulk materials such as polymers, ceramics, and metals. However, both the concept demonstration and the fundamental understanding on how 1D CNTs reinforce atomically thin 2D layered materials, such as graphene, are still absent. Here, we demonstrate the successful synthesis of CNT-toughened graphene by simply annealing functionalized CNTs on Cu foils without needing to introduce extraneous carbon sources. The CNTs act as reinforcing bar (rebar), toughening the graphene through both π–π stacking domains and covalent bonding where the CNTs partially unzip and form a seamless 2D conjoined hybrid as revealed by aberration-corrected scanning transmission electron microscopy analysis. This is termed rebar graphene. Rebar graphene can be free-standing on water and transferred onto target substrates without needing a polymer-coating due to the rebar effects of the CNTs. The utility of rebar graphene sheets as flexible all-carbon transparent electrodes is demonstrated. The in-plane marriage of 1D nanotubes and 2D layered materials might herald an electrical and mechanical union that extends beyond carbon chemistry.


  • Top Cited Papers

    Coal as an abundant source of graphene quantum dots

    by Ruquan Ye, Changsheng Xiang, Jian Lin, Zhiwei Peng, Kewei Huang, Zheng Yan, Nathan P. Cook, Errol L.G. Samuel, Chih-Chau Hwang, Gedeng Ruan, et al.

    Coal is the most abundant and readily combustible energy resource being used worldwide. However, its structural characteristic creates a perception that coal is only useful for producing energy via burning. Here we report a facile approach to synthesize tunable graphene quantum dots from various types of coal, and establish that the unique coal structure has an advantage over pure sp2-carbon allotropes for producing quantum dots. The crystalline carbon within the coal structure is easier to oxidatively displace than when pure sp2-carbon structures are used, resulting in nanometre-sized graphene quantum dots with amorphous carbon addends on the edges. The synthesized graphene quantum dots, produced in up to 20% isolated yield from coal, are soluble and fluorescent in aqueous solution, providing promise for applications in areas such as bioimaging, biomedicine, photovoltaics and optoelectronics, in addition to being inexpensive additives for structural composites.


  • Iron Oxide Nanoparticle and Graphene Nanoribbon Composite as an Anode Material for High‐Performance Li‐Ion Batteries

    by Jian Lin, Abdul‐Rahman O. Raji, Kewang Nan, Zhiwei Peng, Zheng Yan, Errol L. G. Samuel, Douglas Natelson, James M. Tour

    A composite material made of graphene nanoribbons and iron oxide nanoparticles provides a remarkable route to lithium‐ion battery anode with high specific capacity and cycle stability. At a rate of 100 mA/g, the material exhibits a high discharge capacity of ~910 mAh/g after 134 cycles, which is >90% of the theoretical li‐ion storage capacity of iron oxide. Carbon black, carbon nanotubes, and graphene flakes have been employed by researchers to achieve conductivity and stability in lithium‐ion electrode materials. Herein, the use of graphene nanoribbons as a conductive platform on which iron oxide nanoparticles are formed combines the advantages of long carbon nanotubes and flat graphene surfaces. The high capacity over prolonged cycling achieved is due to the synergy between an electrically percolating networks of conductive graphene nanoribbons and the high lithium‐ion storage capability of iron oxide nanoparticles.


  • Graphene‐Wrapped MnO2–Graphene Nanoribbons as Anode Materials for High‐Performance Lithium Ion Batteries

    by Lei Li, Abdul‐Rahman O. Raji, James M. Tour

    A facile and cost-effective approach for the fabrication of a hierarchical nanocomposite material of graphene-wrapped MnO2–graphene nanoribbons (GMG) is developed. The resulting composite has a high specific capacity and an excellent cycling stability owing to the synergistic combination of the electrically conductive graphene, graphene nanoribbons, and MnO2.


  • Nanocomposite of Polyaniline Nanorods Grown on Graphene Nanoribbons for Highly Capacitive Pseudocapacitors

    by Lei Li, Abdul-Rahman O. Raji, Huilong Fei, Yang Yang, Errol L. G. Samuel, James M. Tour

    A facile and cost-effective approach to the fabrication of a nanocomposite material of polyaniline (PANI) and graphene nanoribbons (GNRs) has been developed. The morphology of the composite was characterized by scanning electron microscopy, transmission electron microscopy, X-ray photoelectron microscopy, and X-ray diffraction analysis. The resulting composite has a high specific capacitance of 340 F/g and stable cycling performance with 90% capacitance retention over 4200 cycles. The high performance of the composite results from the synergistic combination of electrically conductive GNRs and highly capacitive PANI. The method developed here is practical for large-scale development of pseudocapacitor electrodes for energy storage.


  • Large-Area Bernal-Stacked Bi-, Tri-, and Tetralayer Graphene

    by Zhengzong Sun, Abdul-Rahman O. Raji, Yu Zhu, Changsheng Xiang, Zheng Yan, Carter Kittrell, E. L. G. Samuel, James M. Tour

    Few-layer graphene, with Bernal stacking order, is of particular interest to the graphene community because of its unique tunable electronic structure. A synthetic method to produce such large area graphene films with precise thickness from 2 to 4 layers would be ideal for chemists and physicists to explore the promising electronic applications of these materials. Here, large-area uniform Bernal-stacked bi-, tri-, and tetralayer graphene films were successfully synthesized on a Cu surface in selective growth windows, with a finely tuned total pressure and CH4/H2 gas ratio. On the basis of the analyses obtained, the growth mechanism is not an independent homoexpitaxial layer-by-layer growth, but most likely a simultaneous-seeding and self-limiting process.


  • In Situ Intercalation Replacement and Selective Functionalization of Graphene Nanoribbon Stacks

    by Bostjan Genorio, Wei Lu, Ayrat M. Dimiev, Yu Zhu, Abdul-Rahman O. Raji, Barbara Novosel, Lawrence B. Alemany, James M. Tour

    A cost-effective and potentially industrially scalable, in situ functionalization procedure for preparation of soluble graphene nanoribbon (GNRs) from commercially available carbon nanotubes is presented. The physical characteristics of the functionalized product were determined using SEM, evolved gas analysis, X-ray diffraction, solid-state 13C NMR, Raman spectroscopy, and GC–MS analytical techniques. A relatively high preservation of electrical properties in the bulk material was observed. Moreover, replacement of intercalated potassium with haloalkanes was obtained. While carbon nanotubes can be covalently functionalized, the conversion of the sp2-hybridized carbon atoms to sp3-hybridized atoms dramatically lowers their conductivity, but edge functionalized GNRs permit their heavy functionalization while leaving the basal planes intact.


  • A seamless three-dimensional carbon nanotube graphene hybrid material

    by Yu Zhu, Lei Li, Chenguang Zhang, Gilberto Casillas, Zhengzong Sun, Zheng Yan, Gedeng Ruan, Zhiwei Peng, Abdul-Rahman O. Raji, Carter Kittrell, et al.

    Graphene and single-walled carbon nanotubes are carbon materials that exhibit excellent electrical conductivities and large specific surface areas. Theoretical work suggested that a covalently bonded graphene/single-walled carbon nanotube hybrid material would extend those properties to three dimensions, and be useful in energy storage and nanoelectronic technologies. Here we disclose a method to bond graphene and single-walled carbon nanotubes seamlessly during the growth stage. The hybrid material exhibits a surface area >2,000 m2 g−1 with ohmic contact from the vertically aligned single-walled carbon nanotubes to the graphene. Using aberration-corrected scanning transmission electron microscopy, we observed the covalent transformation of sp2 carbon between the planar graphene and the single-walled carbon nanotubes at the atomic resolution level. These findings provide a new benchmark for understanding the three-dimensional graphene/single-walled carbon nanotube-conjoined materials.