Jimmy G. D. Hester
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Jimmy G. D. Hester has a total of 95 co-authors. Here are the top co-authors by number of shared publications:
- Aline Eid
University of Michigan, Ann Arbor, USA
20 shared publications - Manos M. Tentzeris
Georgia Institute of Technology
20 shared publications - Jo Bito
School of Electrical and Computer Engineering, Georgia Institute of Technology, Atlanta, GA, USA
5 shared publications Manos M. Tentzeris
Electrical and Computer Engineering, Georgia Institute of Technology, Atlanta, GA, USA
5 shared publications- Ajibayo O. Adeyeye
Department of Electrical and Computer Engineering, Georgia Institute of Technology, Atlanta, GA, USA
4 shared publications - Apostolos Georgiadis
2582 CN The Hague, The Netherlands
4 shared publications
Latest Publications
- Open Access
- 20 June 2026
- Published by Association for Computing Machinery (ACM)
- p. 681-693
Armstrong: A Full-Duplex Backscatter Architecture for the mmWave IoT
- 20 June 2026
- Published by Association for Computing Machinery (ACM)
- p. 681-693
Open AccessArmstrong: A Full-Duplex Backscatter Architecture for the mmWave IoT
- Open Access
- 3 November 2025
- Published by Association for Computing Machinery (ACM)
- p. 1347-1349
Poster: Vibration-Tolerant Doppler Disambiguation Algorithm for MIMO Backscatter Localization Systems
- 3 November 2025
- Published by Association for Computing Machinery (ACM)
- p. 1347-1349
Open AccessPoster: Vibration-Tolerant Doppler Disambiguation Algorithm for MIMO Backscatter Localization Systems
- Open Access
- 3 November 2025
- Published by Association for Computing Machinery (ACM)
- p. 1136-1150
DragonFly: Single mmWave Radar 3D Localization of Highly Dynamic Tags in GPS-Denied Environments
- 3 November 2025
- Published by Association for Computing Machinery (ACM)
- p. 1136-1150
Open AccessDragonFly: Single mmWave Radar 3D Localization of Highly Dynamic Tags in GPS-Denied Environments
- 30 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 74 (5) , 3881-3896
Additively Manufactured FHE-Enabled Antennas and Reconfigurable/Phased Antenna Arrays for Communications, Sensing, and Energy Harvesting
Recent advances in Additive Manufacturing (AM) are transforming the development of flexible and reconfigurable RF electronics, driving innovation in applications such as the Internet of Things (IoT), smart agriculture, Industry 4.0, and smart cities. This review covers a decade of progress in AM for RF applications spanning MHz to sub-THz frequencies, with a focus on antennas, phased arrays, and RF modules designed to meet the demands of 5G/mm-wave and beyond. Key AM techniques, including inkjet and 3D printing, enable the creation of complex multilayer circuits and conformal, reconfigurable components on a wide variety of substrates. Additionally, origami-inspired RF structures, packaging solutions, and energy harvesting and sensing modules are explored, demonstrating AM’s potential for scalable, cost-effective, and multifunctional RF systems. The paper concludes with an outlook on the future of AM in RF electronics, envisioning continued advancements toward sustainable and adaptive communication ecosystems. Through this review, AM is highlighted as a critical enabler of next-generation, multifunctional, and energy-autonomous systems capable of supporting communication and sensing in a low-cost, adaptable, and environmentally sustainable manner.
- 30 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 74 (5) , 3881-3896
Additively Manufactured FHE-Enabled Antennas and Reconfigurable/Phased Antenna Arrays for Communications, Sensing, and Energy Harvesting
Recent advances in Additive Manufacturing (AM) are transforming the development of flexible and reconfigurable RF electronics, driving innovation in applications such as the Internet of Things (IoT), smart agriculture, Industry 4.0, and smart cities. This review covers a decade of progress in AM for RF applications spanning MHz to sub-THz frequencies, with a focus on antennas, phased arrays, and RF modules designed to meet the demands of 5G/mm-wave and beyond. Key AM techniques, including inkjet and 3D printing, enable the creation of complex multilayer circuits and conformal, reconfigurable components on a wide variety of substrates. Additionally, origami-inspired RF structures, packaging solutions, and energy harvesting and sensing modules are explored, demonstrating AM’s potential for scalable, cost-effective, and multifunctional RF systems. The paper concludes with an outlook on the future of AM in RF electronics, envisioning continued advancements toward sustainable and adaptive communication ecosystems. Through this review, AM is highlighted as a critical enabler of next-generation, multifunctional, and energy-autonomous systems capable of supporting communication and sensing in a low-cost, adaptable, and environmentally sustainable manner.
- 11 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave Magazine
- Vol. 26 (5) , 128-132
Paying It Forward: Our Ninth IMS Microwave Week 3MT Competition
Provides society information that may include news, reviews or technical notes that should be of interest to practitioners and researchers.
- 11 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave Magazine
- Vol. 26 (5) , 128-132
Paying It Forward: Our Ninth IMS Microwave Week 3MT Competition
Provides society information that may include news, reviews or technical notes that should be of interest to practitioners and researchers.
- 22 April 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave Magazine
- Vol. 25 (5) , 146-151
The 2024 Microwave Week 3MT Competition, in Memory of John Bandler: Remembering Our Champion
Provides society information that may include news, reviews or technical notes that should be of interest to practitioners and researchers.
- 22 April 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave Magazine
- Vol. 25 (5) , 146-151
The 2024 Microwave Week 3MT Competition, in Memory of John Bandler: Remembering Our Champion
Provides society information that may include news, reviews or technical notes that should be of interest to practitioners and researchers.
- 3 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 72 (4) , 2620-2630
At the Intersection Between Optics and mmWave Design: An Energy Autonomous 5G-Enabled Multilens-Based Broadbeam mmID for “Smart” Digital Twins Applications
For the first time, the authors propose a 5G/mmWave multilens-based retrodirective backscatter system capable of large coverage in both azimuth and elevation directions. The structure features two biconvex lenses backed by an array of individual backscattering elements (pixels). The components of the system are described in detail, including the cascaded polytetrafluoroethylene (PTFE) lenses and the pixel array. Subsequently, the entire system is assembled, and its detectability and large azimuth/elevation coverage is measured and compared to the state-of-the-art. The millimeter wave identification (mmID) displays a peak differential radar cross section (RCS) of $-$ 15.7 dBsm with a $-$ 10 dB coverage of 2.244 sr about boresight, improving the angular coverage by over 204%, relative to a single-lens-based mmID. A theoretical link budget analysis is presented for the best-and worst case incidence angles. Using the maximum allotted 75 dBm equivalent isotropic radiated power (EIRP) in 5G/mmWave frequencies, reading ranges of 5.88 and 3.35 km are envisioned with incidence angles of 0 $^\circ$ and 50 $^\circ$ , respectively. To demonstrate its long-range potential for localized sensing applications, a proof-of-concept (PoC) frequency modulated continuous wave (FMCW) radar is used to range the multi-lens mmID up to 82.5 m within 6 cm of the true range even at the worst case incidence angle. This approach could potentially unlock the deployment of dense battery-less 5G-connected localizable mmID the Internet-of-Things (IoT) swarms in “Smart” digital twinning applications.
- 3 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 72 (4) , 2620-2630
At the Intersection Between Optics and mmWave Design: An Energy Autonomous 5G-Enabled Multilens-Based Broadbeam mmID for “Smart” Digital Twins Applications
For the first time, the authors propose a 5G/mmWave multilens-based retrodirective backscatter system capable of large coverage in both azimuth and elevation directions. The structure features two biconvex lenses backed by an array of individual backscattering elements (pixels). The components of the system are described in detail, including the cascaded polytetrafluoroethylene (PTFE) lenses and the pixel array. Subsequently, the entire system is assembled, and its detectability and large azimuth/elevation coverage is measured and compared to the state-of-the-art. The millimeter wave identification (mmID) displays a peak differential radar cross section (RCS) of $-$ 15.7 dBsm with a $-$ 10 dB coverage of 2.244 sr about boresight, improving the angular coverage by over 204%, relative to a single-lens-based mmID. A theoretical link budget analysis is presented for the best-and worst case incidence angles. Using the maximum allotted 75 dBm equivalent isotropic radiated power (EIRP) in 5G/mmWave frequencies, reading ranges of 5.88 and 3.35 km are envisioned with incidence angles of 0 $^\circ$ and 50 $^\circ$ , respectively. To demonstrate its long-range potential for localized sensing applications, a proof-of-concept (PoC) frequency modulated continuous wave (FMCW) radar is used to range the multi-lens mmID up to 82.5 m within 6 cm of the true range even at the worst case incidence angle. This approach could potentially unlock the deployment of dense battery-less 5G-connected localizable mmID the Internet-of-Things (IoT) swarms in “Smart” digital twinning applications.
- Top Cited PapersOpen Access
- 3 April 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Microwaves
- Vol. 3 (2) , 763-782
RF Energy Harvesting and Wireless Power Transfer for Energy Autonomous Wireless Devices and RFIDs
Radio frequency (RF) energy harvesting and wireless power transmission (WPT) technologies —both near-field and far-field—have attracted significant interest for wireless applications and RFID systems. We already utilize near-field WPT products in our life and it is expected that RF EH and far-field WPT systems can drive the future low-power wireless systems. In this article, we initially present a brief historical overview of these technologies. The main technical challenges of rectennas and WPT transmitters are discussed. Furthermore, this paper presents the recent advances on the development of these technologies, including the possibility of powering RFID systems through the millimeter wave power from 5G networks, the trends in flexible rectennas design and the technological developments on the simultaneous wireless information and power transfer (SWIPT).
- 3 April 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Microwaves
- Vol. 3 (2) , 763-782
Top Cited PapersOpen AccessRF Energy Harvesting and Wireless Power Transfer for Energy Autonomous Wireless Devices and RFIDs
Radio frequency (RF) energy harvesting and wireless power transmission (WPT) technologies —both near-field and far-field—have attracted significant interest for wireless applications and RFID systems. We already utilize near-field WPT products in our life and it is expected that RF EH and far-field WPT systems can drive the future low-power wireless systems. In this article, we initially present a brief historical overview of these technologies. The main technical challenges of rectennas and WPT transmitters are discussed. Furthermore, this paper presents the recent advances on the development of these technologies, including the possibility of powering RFID systems through the millimeter wave power from 5G networks, the trends in flexible rectennas design and the technological developments on the simultaneous wireless information and power transfer (SWIPT).
- Open Access
- 24 January 2023
- Published by Springer Nature in Nature Electronics
- p. 1
Publisher Correction: Wirelessly powered large-area electronics for the Internet of Things
- 24 January 2023
- Published by Springer Nature in Nature Electronics
- p. 1
Open AccessPublisher Correction: Wirelessly powered large-area electronics for the Internet of Things
- 4 January 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 71 (1) , 330-338
5G/mm-Wave Fully-Passive Dual Rotman Lens-Based Harmonic mmID for Long Range Microlocalization Over Wide Angular Ranges
In this work, for the first time, a 5G/mm-Wave harmonic frequency modulated continuous wave (FMCW) radar with dual Rotman lens-based harmonic millimeter identification (mmID) ranging system is proposed enabling ultralong range highly accurate localization for future localized sensing cyberphysical systems (CPSs). A detailed characterization of the fully-passive harmonic mmID is first presented with an estimated maximum harmonic radar cross section (RCS) of $-$ 35.8 dBsm and a 10 dB beamwidth of $\pm50^\circ$ . The mmID fully overcomes the high-gain beamwidth tradeoff seen in typical high-gain designs enabling robust, ultralong-range detectability. A link budget analysis of the proposed harmonic mmID is presented with the current proof-of-concept (PoC) harmonic radar and with an equivalent isotropic radiated power (EIRP) of 75 dBm reading ranges in excess of 8 km are envisioned. In addition, the system provides a highly accurate ranging at long range with a bounded maximum ranging error of 17 cm up to 46 m from the radar. Furthermore, the 5G/mm-Wave system capitalizes on the highly sensitive phase information for ultrafine 0.4 mm accurate ranging at 10 m. Thus, the proposed system presents a fully-passive, long-range ranging system for future CPSs.
- 4 January 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 71 (1) , 330-338
5G/mm-Wave Fully-Passive Dual Rotman Lens-Based Harmonic mmID for Long Range Microlocalization Over Wide Angular Ranges
In this work, for the first time, a 5G/mm-Wave harmonic frequency modulated continuous wave (FMCW) radar with dual Rotman lens-based harmonic millimeter identification (mmID) ranging system is proposed enabling ultralong range highly accurate localization for future localized sensing cyberphysical systems (CPSs). A detailed characterization of the fully-passive harmonic mmID is first presented with an estimated maximum harmonic radar cross section (RCS) of $-$ 35.8 dBsm and a 10 dB beamwidth of $\pm50^\circ$ . The mmID fully overcomes the high-gain beamwidth tradeoff seen in typical high-gain designs enabling robust, ultralong-range detectability. A link budget analysis of the proposed harmonic mmID is presented with the current proof-of-concept (PoC) harmonic radar and with an equivalent isotropic radiated power (EIRP) of 75 dBm reading ranges in excess of 8 km are envisioned. In addition, the system provides a highly accurate ranging at long range with a bounded maximum ranging error of 17 cm up to 46 m from the radar. Furthermore, the 5G/mm-Wave system capitalizes on the highly sensitive phase information for ultrafine 0.4 mm accurate ranging at 10 m. Thus, the proposed system presents a fully-passive, long-range ranging system for future CPSs.