Seyfettin Bayraktar
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Seyfettin Bayraktar has a total of 47 co-authors. Here are the top co-authors by number of shared publications:
- Tamer Yilmaz
Department of Naval Architecture and Marine Engineering, Yildiz Technical University, Istanbul, Turkey
7 shared publications Abdullah Bolek
Istanbul Technical University
2 shared publications- Ali Dogrul
National Defense University, Naval Academy
2 shared publications - Furkan Turkoglu
Department of Naval Architecture and Marine Engineering, Yildiz Technical University, Istanbul, Turkey
2 shared publications - Meral Bayraktar
Yildiz Teknik Üniversitesi
2 shared publications - Sarih Sarı
Yildiz Teknik Üniversitesi
2 shared publications
Latest Publications
- 1 November 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (11)
Unsteady airwake dynamics of generic destroyer: A spectral and wavelet approach
The turbulent wake of naval ship geometries is important because the ship's superstructure is a blunt body. The investigation of the unsteady airwake behind the superstructure provides an in-depth investigation of time-series velocity data obtained by numerical analyses. This study focuses on spectral and wavelet analysis to determine the coherent structures in detail. Fast Fourier transform (FFT), power spectral density (PSD), and continuous wavelet transform (CWT) analyses were performed using in-house developed code. In the transition from the time domain to the frequency domain, the amplitude spectrum was derived using an FFT, and the CWT was also employed to show the intermittency of coherent structures and vortex shedding. The wavelet scalograms show the relationship between amplitude and time; in addition, turbulent kinetic energy (TKE) and turbulence intensity were calculated from the PSD data. The results reveal the sensitivity of the fluctuation velocity components and the TKE for broadband turbulence at different wind-over-deck angles. The signal processing of raw time-series data reveals details of flow in the ship airwake region, enabling comprehensive characterization of turbulence. The vertical-axis (w) vortex breaks are dominated by the resonant characteristics of the hangar geometry (backward-facing step), independent of the wind direction, while for the lateral-axis (v), asymmetric wind-over-deck angles result in a significant shift of spectral energy toward higher frequency bands.
- 1 November 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (11)
Unsteady airwake dynamics of generic destroyer: A spectral and wavelet approach
The turbulent wake of naval ship geometries is important because the ship's superstructure is a blunt body. The investigation of the unsteady airwake behind the superstructure provides an in-depth investigation of time-series velocity data obtained by numerical analyses. This study focuses on spectral and wavelet analysis to determine the coherent structures in detail. Fast Fourier transform (FFT), power spectral density (PSD), and continuous wavelet transform (CWT) analyses were performed using in-house developed code. In the transition from the time domain to the frequency domain, the amplitude spectrum was derived using an FFT, and the CWT was also employed to show the intermittency of coherent structures and vortex shedding. The wavelet scalograms show the relationship between amplitude and time; in addition, turbulent kinetic energy (TKE) and turbulence intensity were calculated from the PSD data. The results reveal the sensitivity of the fluctuation velocity components and the TKE for broadband turbulence at different wind-over-deck angles. The signal processing of raw time-series data reveals details of flow in the ship airwake region, enabling comprehensive characterization of turbulence. The vertical-axis (w) vortex breaks are dominated by the resonant characteristics of the hangar geometry (backward-facing step), independent of the wind direction, while for the lateral-axis (v), asymmetric wind-over-deck angles result in a significant shift of spectral energy toward higher frequency bands.
- Open Access
- 4 August 2026
- Published by Springer Nature in Journal of the Brazilian Society of Mechanical Sciences and Engineering
- Vol. 48 (9) , 614
A numerical study comparing hydrodynamic performance of circular and square cross-sectional wetted venturi scrubbers
The contaminants are cleared from the gas before they are released into the environment by venturi scrubbers that are easy to use and effective gas cleaning equipment. Venturi scrubbers use liquids to remove contaminants from the gaseous medium. In the present study, single and double-phase flows in both circular and square cross-sectional wetted venturi scrubbers are investigated by employing the computational fluid dynamics method. Air is sent to the venturi while water is injected from four circular circumferentially located nozzles. Simulations are performed for various water flow rates and air inlet velocities employing the Euler-Lagrangian-based Discrete Phase Model (DPM). The hydrodynamic performances of both types of scrubbers are compared to each other for various water flow rates, air inlet velocities and the liquid-to-gas (L/G) ratios. For the single-phase flow, it is seen that at the same air inlet velocity, the circular scrubber experiences a greater pressure reduction. For the double-phase flow, the pressure drop increases almost linearly with gas inlet velocity and water mass flow rate. As the liquid/gas (L/G) ratio increases, the pressure drop becomes significantly larger. The square cross-sectional scrubber yields the maximum collecting efficiency, approaching 96%, whereas the predicted effectiveness of the circular one is 58% at the lowest mass flow rate. It is also discovered that increasing the water flow rate and the inlet gas velocity decreases the collection efficiency in square scrubbers by 21% and in circular scrubbers by 24%.
- 4 August 2026
- Published by Springer Nature in Journal of the Brazilian Society of Mechanical Sciences and Engineering
- Vol. 48 (9) , 614
Open AccessA numerical study comparing hydrodynamic performance of circular and square cross-sectional wetted venturi scrubbers
The contaminants are cleared from the gas before they are released into the environment by venturi scrubbers that are easy to use and effective gas cleaning equipment. Venturi scrubbers use liquids to remove contaminants from the gaseous medium. In the present study, single and double-phase flows in both circular and square cross-sectional wetted venturi scrubbers are investigated by employing the computational fluid dynamics method. Air is sent to the venturi while water is injected from four circular circumferentially located nozzles. Simulations are performed for various water flow rates and air inlet velocities employing the Euler-Lagrangian-based Discrete Phase Model (DPM). The hydrodynamic performances of both types of scrubbers are compared to each other for various water flow rates, air inlet velocities and the liquid-to-gas (L/G) ratios. For the single-phase flow, it is seen that at the same air inlet velocity, the circular scrubber experiences a greater pressure reduction. For the double-phase flow, the pressure drop increases almost linearly with gas inlet velocity and water mass flow rate. As the liquid/gas (L/G) ratio increases, the pressure drop becomes significantly larger. The square cross-sectional scrubber yields the maximum collecting efficiency, approaching 96%, whereas the predicted effectiveness of the circular one is 58% at the lowest mass flow rate. It is also discovered that increasing the water flow rate and the inlet gas velocity decreases the collection efficiency in square scrubbers by 21% and in circular scrubbers by 24%.
- 29 July 2026
- Published by Springer Nature in Sādhanā
- Vol. 51 (3) , 198
Delayed detached eddy simulations of heat transfer and flow over smooth and circumferentially grooved tandem circular cylinders
- 29 July 2026
- Published by Springer Nature in Sādhanā
- Vol. 51 (3) , 198
Delayed detached eddy simulations of heat transfer and flow over smooth and circumferentially grooved tandem circular cylinders
- 26 June 2026
- Published by Turkish National Defense University in Journal of Naval Sciences and Engineering
- Vol. 22 (1) , 189-216
Airwake Control of ONR Tumblehome Using CVG
Ship aerodynamics studies are increasing in recent years due to the developments in aerodynamic design of the ships. Ship superstructures are designed carefully for better performance of systems and sensors located on the superstructure. Also ship-helicopter interaction comes into mind when the ship has a flight deck for landing and take-off operations. In this study, a comprehensive validation of ship airwake was made for the well-known benchmark model, ONR Tumblehome (ONRT), in model scale. Numerical analyses were carried out solving the unsteady RANS equations with hexahedral finite volume elements. Atmospheric boundary layer (ABL) was used to create more realistic velocity profile in the computational domain. Following the validation, columnar vortex generators (CVG) were designed and integrated to the ship superstructure as the passive controller of the airwake. Impressive healing on the airwake was observed when CVG is located on the ship. The use of appropriate CVG geometry shortened the recirculation region and the reattachment length. This finding leads to lower turbulence intensity and fluctuations over the flight deck.
- 26 June 2026
- Published by Turkish National Defense University in Journal of Naval Sciences and Engineering
- Vol. 22 (1) , 189-216
Airwake Control of ONR Tumblehome Using CVG
Ship aerodynamics studies are increasing in recent years due to the developments in aerodynamic design of the ships. Ship superstructures are designed carefully for better performance of systems and sensors located on the superstructure. Also ship-helicopter interaction comes into mind when the ship has a flight deck for landing and take-off operations. In this study, a comprehensive validation of ship airwake was made for the well-known benchmark model, ONR Tumblehome (ONRT), in model scale. Numerical analyses were carried out solving the unsteady RANS equations with hexahedral finite volume elements. Atmospheric boundary layer (ABL) was used to create more realistic velocity profile in the computational domain. Following the validation, columnar vortex generators (CVG) were designed and integrated to the ship superstructure as the passive controller of the airwake. Impressive healing on the airwake was observed when CVG is located on the ship. The use of appropriate CVG geometry shortened the recirculation region and the reattachment length. This finding leads to lower turbulence intensity and fluctuations over the flight deck.
- Open Access
- 25 March 2025
- Published by Marmara University in International Journal of Advances in Engineering and Pure Sciences
- Vol. 37 (1) , 8-18
Farklı Türbülans Modellerinin Daire ve Kare Kesitli Gaz Yıkayıcıların Hidrodinamik Performansları Üzerindeki Etkileri
Bu çalışmada, ıslak venturi tipi gaz temizleyiciler ele alınarak farklı türbülans modellerinin özdeş kare ve daire kesitli gaz temizleyicilerin hidrodinamik performansları üzerindeki etkileri Hesaplamalı Akışkanlar Dinamiği (HAD) metodu kullanılarak incelenmiştir. Verifikasyon ve doğrulama çalışmaları yapılarak sonuçlar literatürdeki sayısal ve deneysel verilerle başarılı bir şekilde mukayese edilmiştir. Daha sonra iki farklı kesit geometrisine sahip gaz temizleyicilerin toplama verimi, basınç düşüşü ve hız dağılımları mukayese edilerek k-epsilon (Standart, Realizable ve RNG) ve k- (Standart ve SST) türbülans modellerinin venturi gaz temizleyicilerdeki performansları birbirleri ile karşılaştırmalı olarak sunulmuş ve damlacık toplama verimi açısından Realizable k- türbülans modelinin diğer modellere nazaran daha başarılı olduğu ancak basınç dağılımlarını tahmininde tüm bu modellerin birbirlerine yakın bir sonuçlar verdiği gösterilmiştir. Mukayese edilen daire ve kare kesitli özdeş gaz temizleyicilerden birincisinde daha yüksek hız ve dolayısıyla daha düşük basınç dağılımları elde edildiği ancak kare kesitli gaz temizleyicinin damlacık toplama veriminin dairesel kesitli olana nazaran %53 ile daha yüksek olduğu sonucuna varılmıştır.
- 25 March 2025
- Published by Marmara University in International Journal of Advances in Engineering and Pure Sciences
- Vol. 37 (1) , 8-18
Open AccessFarklı Türbülans Modellerinin Daire ve Kare Kesitli Gaz Yıkayıcıların Hidrodinamik Performansları Üzerindeki Etkileri
Bu çalışmada, ıslak venturi tipi gaz temizleyiciler ele alınarak farklı türbülans modellerinin özdeş kare ve daire kesitli gaz temizleyicilerin hidrodinamik performansları üzerindeki etkileri Hesaplamalı Akışkanlar Dinamiği (HAD) metodu kullanılarak incelenmiştir. Verifikasyon ve doğrulama çalışmaları yapılarak sonuçlar literatürdeki sayısal ve deneysel verilerle başarılı bir şekilde mukayese edilmiştir. Daha sonra iki farklı kesit geometrisine sahip gaz temizleyicilerin toplama verimi, basınç düşüşü ve hız dağılımları mukayese edilerek k-epsilon (Standart, Realizable ve RNG) ve k- (Standart ve SST) türbülans modellerinin venturi gaz temizleyicilerdeki performansları birbirleri ile karşılaştırmalı olarak sunulmuş ve damlacık toplama verimi açısından Realizable k- türbülans modelinin diğer modellere nazaran daha başarılı olduğu ancak basınç dağılımlarını tahmininde tüm bu modellerin birbirlerine yakın bir sonuçlar verdiği gösterilmiştir. Mukayese edilen daire ve kare kesitli özdeş gaz temizleyicilerden birincisinde daha yüksek hız ve dolayısıyla daha düşük basınç dağılımları elde edildiği ancak kare kesitli gaz temizleyicinin damlacık toplama veriminin dairesel kesitli olana nazaran %53 ile daha yüksek olduğu sonucuna varılmıştır.
- 14 September 2024
- Published by Springer Nature in Arabian Journal for Science and Engineering
- Vol. 50 (17) , 13839-13850
Numerical Studies on the Oil–Water Mixture Separation by Corrugated Plates with Hooks and Holes in Various Shapes and Configurations
- 14 September 2024
- Published by Springer Nature in Arabian Journal for Science and Engineering
- Vol. 50 (17) , 13839-13850
Numerical Studies on the Oil–Water Mixture Separation by Corrugated Plates with Hooks and Holes in Various Shapes and Configurations
- 7 December 2022
- Published by Elsevier in Ocean Engineering
- Vol. 267
Three-dimensional computational analysis of flow over twisted hydrofoils
- 7 December 2022
- Published by Elsevier in Ocean Engineering
- Vol. 267
Three-dimensional computational analysis of flow over twisted hydrofoils
- 1 August 2021
- Published by Elsevier in Applied Ocean Research
- Vol. 113, 102767
Innovative computational modal analysis of a marine propeller
- 1 August 2021
- Published by Elsevier in Applied Ocean Research
- Vol. 113, 102767
Innovative computational modal analysis of a marine propeller
- 5 March 2021
- Published by Journal of the Faculty of Engineering and Architecture of Gazi University in Gazi Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi
- Vol. 36 (2) , 1145-1158
Bir ters-basamak üzerindeki engellerin etrafındaki akışın sayısal olarak incelenmesi
Bu çalışmada, bir ters-basamak üzerine konumlandırılmış kare, daire ve eşkenar üçgen kesitli prizmatik engellerin akım alanı üzerindeki etkileri sayısal olarak incelenmiştir. Türbülanslı, üç-boyutlu, daimi ve sıkıştırılamaz olarak kabul edilen akış, modifiye k-omega türbülans modeli kullanılarak çözülmüştür. Elde edilen sonuçlar, boyutsuz sürtünme ve boyutsuz basınç katsayıları ile boyutsuz ayrılmış akış bölgesi cinsinden sunulmuşlardır. Çalışmada engellerin geometrik şekillerinin dışında, yüksekliklerinin (h) ilgili değişkenler üzerindeki etkileri basamak yüksekliği (H) ile boyutsuzlaştırılarak H/h=0,125; 0.25; 0,5 ve 1 için sunulmuştur. Üzerinde engel bulunmayan ters-basamak için elde edilen sayısal sonuçlar, Driver and Seegmiller, 1985`in deneysel verileri ile karşılaştırılarak sayısal modelin doğruluğu gösterilmiştir. Üzerinde engel olmayan ters-basamak üzerindeki akış göz önüne alındığında, sadece engellerin varlıklarının değil, aynı zamanda kesit şekillerinin de sürtünme katsayısı, basınç katsayısı ve boyutsuz ayrılmış akış bölgesi uzunluğu üzerinde etkilerinin olduğu görülmüştür. Ters-basamak üzerine konulmuş engellerin kesit geometrisi fark etmeksizin herhangi bir engelin varlığının, ayrılmış akış bölgesi uzunluğunu artırdığı, ancak en uzun bölgeye, eşkenar üçgen kesitli prizma kullanıldığında ulaşıldığı saptanmıştır. Engel yüksekliğinin ayrılmış akış bölgesi üzerindeki etkisinin H/h=0,25 ten sonra oldukça düşük olduğu belirlenmiştir.
- 5 March 2021
- Published by Journal of the Faculty of Engineering and Architecture of Gazi University in Gazi Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi
- Vol. 36 (2) , 1145-1158
Bir ters-basamak üzerindeki engellerin etrafındaki akışın sayısal olarak incelenmesi
Bu çalışmada, bir ters-basamak üzerine konumlandırılmış kare, daire ve eşkenar üçgen kesitli prizmatik engellerin akım alanı üzerindeki etkileri sayısal olarak incelenmiştir. Türbülanslı, üç-boyutlu, daimi ve sıkıştırılamaz olarak kabul edilen akış, modifiye k-omega türbülans modeli kullanılarak çözülmüştür. Elde edilen sonuçlar, boyutsuz sürtünme ve boyutsuz basınç katsayıları ile boyutsuz ayrılmış akış bölgesi cinsinden sunulmuşlardır. Çalışmada engellerin geometrik şekillerinin dışında, yüksekliklerinin (h) ilgili değişkenler üzerindeki etkileri basamak yüksekliği (H) ile boyutsuzlaştırılarak H/h=0,125; 0.25; 0,5 ve 1 için sunulmuştur. Üzerinde engel bulunmayan ters-basamak için elde edilen sayısal sonuçlar, Driver and Seegmiller, 1985`in deneysel verileri ile karşılaştırılarak sayısal modelin doğruluğu gösterilmiştir. Üzerinde engel olmayan ters-basamak üzerindeki akış göz önüne alındığında, sadece engellerin varlıklarının değil, aynı zamanda kesit şekillerinin de sürtünme katsayısı, basınç katsayısı ve boyutsuz ayrılmış akış bölgesi uzunluğu üzerinde etkilerinin olduğu görülmüştür. Ters-basamak üzerine konulmuş engellerin kesit geometrisi fark etmeksizin herhangi bir engelin varlığının, ayrılmış akış bölgesi uzunluğunu artırdığı, ancak en uzun bölgeye, eşkenar üçgen kesitli prizma kullanıldığında ulaşıldığı saptanmıştır. Engel yüksekliğinin ayrılmış akış bölgesi üzerindeki etkisinin H/h=0,25 ten sonra oldukça düşük olduğu belirlenmiştir.