JLJing Li

Jing Li

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Jing Li has a total of 66 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Alloy Formation and Microstructural Regulation in FeCo Nanoalloy/Carbon Nanotube Composites for Oxygen Evolution Reaction

    by Yufan Qu, Shoulong Shang, Hongxin Fang, Xinhao Zou, Ying Li, Jing Li, Yuhua Xue, Hanxun Qiu

    The rational design of bimetallic nanostructures with optimized physicochemical properties is of significant interest for electrocatalytic applications. In this work, a FeCo/MWCNT composite was synthesized through solvothermal assembly of a FeCo-MOF precursor with multi-walled carbon nanotubes, followed by high-temperature carbonization. The thermal treatment induces the formation of crystalline FeCo nanoalloys and simultaneously promotes strong coupling between alloy nanoparticles and the conductive carbon nanotube framework. Structural characterizations confirm uniform dispersion of FeCo nanoalloys and the establishment of a robust interconnected architecture, which enhances electrical conductivity and structural stability. The evolution of alloy phase and metal-carbon interactions leads to modulation of the electronic structure of Fe and Co species and improved interfacial charge-transfer characteristics. As a result, the optimized composite exhibits an overpotential of 263 mV at 10 mA cm⁻² and a Tafel slope of 53.7 mV dec⁻¹ in alkaline solution, together with low charge-transfer resistance and stable operation. The enhanced performance is closely correlated with alloy formation, increased electrochemically active surface area, and facilitated electron transport within the hybrid framework. This study provides insight into the structure-property relationship of MOF-derived bimetallic nanoalloys integrated with conductive carbon networks and offers a feasible strategy for tailoring physicochemical properties of transition-metal-based electrocatalysts.

  • Open Access

    MOF-Derived FeCo Nanoalloys Integrated with Carbon Nanotube Networks for Oxygen Evolution Electrocatalysis

    by Yufan Qu, Shoulong Shang, Hongxin Fang, Xinhao Zou, Ying Li, Jing Li, Yuhua Xue, Hanxun Qiu

    The development of efficient and durable non-noble metal electrocatalysts for the oxygen evolution reaction (OER) is critical for advancing alkaline water electrolysis. Herein, a FeCo/MWCNT composite catalyst was synthesized via a solvothermal assembly of a FeCo-MOF precursor with multi-walled carbon nanotubes, followed by high-temperature carbonization. During the carbonization process, bimetallic FeCo nanoalloys were formed and uniformly wrapped within an entangled MWCNT network, resulting in enhanced electrical conductivity and structural stability. The optimized FeCo/MWCNT catalyst exhibits excellent OER performance in alkaline media, requiring an overpotential of only 263 mV to achieve a current density of 10 mA cm−2, along with a low Tafel slope of 53.7 mV dec−1. Electrochemical characterization reveals a large electrochemically active surface area, low charge-transfer resistance, and accelerated reaction kinetics. Moreover, the catalyst demonstrates excellent durability during prolonged operation. The enhanced OER performance is attributed to the alloy-induced electronic modulation of FeCo active sites and the efficient electron transport provided by the interconnected carbon nanotube network. This study demonstrates that alloy-carbon integration in MOF-derived materials offers an effective approach to improving the activity-stability balance of non-noble metal electrocatalysts for alkaline oxygen evolution.

  • Open Access

    Construction of Graphite Shells on Ferromanganese Oxide for Electromagnetic Wave Absorption

    by Yuxiang Zhang, Shuling Shen, Jing Li

    Ferromanganese oxide (FMO), a by-product of steelmaking industry, was coated with polyacrylonitrile (PAN) to construct an electromagnetic wave absorber (FMO@C) with a core–shell structure. The effect of heat treatment from 600 to 1000 °C on the phase transformation of FMO and carbonization of PAN was studied. Upon the heat treatment at 1000 °C, the reflection loss and effective bandwidth of the FMO@C reached −18.20 dB and 3.08 GHz at a thickness of 1.6 mm, presenting a significant improvement over FMO which only exhibited a reflection loss of −2.31 dB at 10 mm. Boric acid was infiltrated into the PAN shells to catalyze the carbonization process and adjust the impedance matching, which further improved the reflection loss to a minimum value of −28.25 dB. Via varying the concentration of boric acid, the reflection loss of −22.01 dB with an effective bandwidth of 3.36 GHz at a thickness of 1.3 mm was achieved. The enhanced EMW absorption performance was attributed to multiple reflections and polarization caused by the core–shell structure, magnetic loss from the phase transformation of FMO, dielectric loss from carbon shells, as well as the tunable impedance matching by boron-catalyzed carbonization. The construction of the core–shell structure could be a promising downstream processing of FMO and could extend the application of the solid wastes.

  • Open Access

    Enhanced Antibacterial Activity of Sodium Titanate/Graphene Quantum Dot Self-Supporting Membranes via Synergistic Photocatalysis and Physical Cutting

    by Shuling Shen, Ji Wang, Yaru Li, Xinjuan Liu, Zhihong Tang, Huixin Xiu, Jing Li, Guanglei Zhou

    Graphene quantum dots (GQDs) show significant promise as antibacterial agents, but their application is hindered by several limitations, including potential cytotoxicity at high concentrations, as well as concerns regarding aggregation and reusability. In this study, sodium titanate (NTO) ultralong nanotubes were utilized as both a photocatalyst and support for GQDs. The NTO/GQDs heterojunction was formed by embedding GQDs nanoplates onto the walls of NTO nanotubes. This integration significantly improved the visible light absorption and enhanced the separation and transfer of electron–hole pairs, leading to an efficient photocatalytic antibacterial process. The NTO/GQD-8 self-supporting membrane composed of these ultralong nanotubes demonstrated outstanding antibacterial efficiency (99.99%) against E. coli and exhibited remarkable cycling stability. Radical scavenging experiments revealed that ∙OH and e− were the primary reactive species driving the photocatalytic antibacterial process. Notably, NTO and NTO/GQDs-8 exhibited distinct antibacterial outcomes. After photocatalytic treatment with NTO/GQDs-8, E. coli cells were completely fragmented, with no intact cell structures remaining due to the synergy effect of GQDs’ physical cutting during photocatalytic treatment.


  • Hydrothermal enhanced etching of Ni for direct recovery of gold flakes from electronic waste

    by Shuling Shen, Yu Chu, Ziwei Feng, Zheng Du, Huixin Xiu, Xinjuan Liu, Shuning Xiao, Zhihong Tang, Jing Li, Xun Wang

    The content of precious Au in electronic waste (e-waste) is often tens to hundreds of times higher than that in natural ore deposits. Current technologies for recovering Au from e-waste mainly involve a two-step process of leaching and reduction, which are accompanied by high energy consumption, greenhouse gas emissions and toxic agents. In this article, we present an efficient, environmentally friendly and scalable hydrothermal catalysis technique for the one-step recovery of Au solid flakes from e-waste. The recovery process avoids the use of strong acids, alkalis, or toxic agents and operates under mild conditions (80–130 °C). During the hydrothermal reaction, Ni beneath the Au layer is selectively etched by hydroxyl radicals (˙OH), allowing the Au layer to be directly peeled off and recovered. Au solid flakes with a high recovery rate (up to 99.2%) and high purity (96.6%, without a further purification process) are obtained, eliminating the need for any additional reduction process. This research emphasizes the crucial role of both hydrothermal conditions and catalysts (e.g. TiO2) in promoting the generation of ˙OH. The results of an techno-economic analysis and life cycle assessment indicate that this hydrothermal catalysis technique is a low-cost and environmentally friendly method for large-scale Au recovery from e-waste.


  • Oleogel Microsphere‐Based Composite Protective Coatings with Room‐Temperature Self‐Healing Enabled by a “Soft + Hard” Hybrid Architecture

    by Jincan Cui, Yanyang Bao, Qibin Dai, Fuping Li, Heng Wang, Yu Liu, Fengli Cao, Jing Li

    Intrinsically self‐healing coatings are compelling candidates for highly reliable anti‐corrosion technologies because of their easy implementation, low cost, and repeatable self‐healing. However, most of these coatings require intervention to initiate healing due to the locking of their chain segments under ambient conditions (to provide sufficient mechanical strength). Herein, a “soft + hard” hybrid architecture strategy of preparing oleogel‐based protective coatings with room‐temperature and repeatable self‐healing is proposed by embedding “soft” self‐healing and viscoelastic oleogel microspheres (OMs) in “hard” waterborne epoxy matrix. Such a decoupled design affords both instantaneous healing without external stimuli (crack narrowing within 10 min and protection recovered within 5 h) and good mechanical properties (improved wear resistance with an 80% reduction in friction coefficient, a 63% reduction in wear volume, as well as a maintained adhesion strength of 96%). The slippery and hydrophobic OMs also bring anti‐biofouling, interfacial water repellency, and inhibitor loading‐release features, leading to coatings with superior corrosion protection (>1010 Ω cm2 impedance modulus throughout 110 d) rather than just their self‐healing. This work demonstrates a feasible approach to integrating room‐temperature repeatable self‐healing and sufficient mechanical strength in future coating design.


  • Nitrogen-Doped Cellulose-Based Porous Carbon for Electrocatalytic CO2 Reduction to CO

    by Zhiwei Zhou, Peng Xia, Yifan Tan, Shuning Xiao, Yuhua Xue, Jing Li, Guangzhi Yang