Gino D'OVidio
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Gino D'OVidio has a total of 62 co-authors. Here are the top co-authors by number of shared publications:
Francesco Crisi
7 shared publicationsGiovanni Lanzara
5 shared publications- Zigang Deng
Southwest Jiaotong University
4 shared publications Aurelio Navarra
Transportation Dept., Faculty of Engineering, University of L'Aquila
3 shared publicationsC. Masciovecchio
Department of Civil, Construction-Architectural and Environmental Engineering, University of L'Aquila, via Gronchi, 18, 67100, Italy
3 shared publicationsA. Ometto
Department of Industrial and Information Engineering and Economics, University of L'Aquila, via Gronchi, 18, 67100, Italy
2 shared publications
Latest Publications
- Open Access
- 1 November 2026
- Published by Polish Mineral Engineering Society in Inżynieria Mineralna
- Vol. 2 (1)
ERTMS Level 2 Implementation on a Regional Railway Line: An Italian Case Study
Advancements in railway signalling and train control technologies have significantly contributed to improving operational safety, service reliability, and infrastructure utilization within contemporary railway networks. In this context, the European Rail Traffic Management System (ERTMS) represents the main initiative aimed at standardizing railway signalling and enabling interoperability among national rail systems. By integrating the European Train Control System (ETCS) with digital railway communication technologies, ERTMS supports more efficient traffic management and higher operational safety levels. Although the system has been extensively implemented on high-speed lines and strategic freight corridors, its application to regional railway networks characterized by simpler infrastructure and limited signalling equipment has received comparatively less attention. To assess the actual performance benefits of this system in secondary operational contexts - characterized by low speeds and limited traffic demand - this paper investigates the potential implementation of an ERTMS Level 2 (ERTMS L2) signalling architecture on a regional single-track railway line in central Italy. The analysis focuses on the Lanciano – San Vito Chietino railway line in the Abruzzo region, which currently operates under restrictive conditions due to the lack of an advanced signalling and train protection system. Consequently, operational regulations impose strict limits on train speed and service frequency, resulting in reduced operational and the Radio Block Centre (RBC). The block layout and associated speed constraints are defined according to operational and safety requirements, while radio communication continuity is ensured through the strategic positioning of GSM - R antennas connected by a redundant fibre - optic network.To evaluate the potential benefits of the proposed system, the current operational scenario is compared with a theoretical scenario in which ERTMS L2 is fully implemented. The analysis indicates that running time could be reduced by approximately one quarter, corresponding to a cumulative annual saving of about 87,000 hours at current demand levels, with notable socio - economic benefits. Additionally, the upgraded signalling system could increase service frequency by 200%. The results suggest that the introduction of ERTMS L2 on regional railway infrastructure can generate relevant improvements in operational performance, service capacity, and safety conditions. Furthermore, the study highlights the importance of adopting advanced signalling solutions as a strategy to enhance the efficiency and competitiveness of secondary railway lines within regional transport systems.
- 1 November 2026
- Published by Polish Mineral Engineering Society in Inżynieria Mineralna
- Vol. 2 (1)
Open AccessERTMS Level 2 Implementation on a Regional Railway Line: An Italian Case Study
Advancements in railway signalling and train control technologies have significantly contributed to improving operational safety, service reliability, and infrastructure utilization within contemporary railway networks. In this context, the European Rail Traffic Management System (ERTMS) represents the main initiative aimed at standardizing railway signalling and enabling interoperability among national rail systems. By integrating the European Train Control System (ETCS) with digital railway communication technologies, ERTMS supports more efficient traffic management and higher operational safety levels. Although the system has been extensively implemented on high-speed lines and strategic freight corridors, its application to regional railway networks characterized by simpler infrastructure and limited signalling equipment has received comparatively less attention. To assess the actual performance benefits of this system in secondary operational contexts - characterized by low speeds and limited traffic demand - this paper investigates the potential implementation of an ERTMS Level 2 (ERTMS L2) signalling architecture on a regional single-track railway line in central Italy. The analysis focuses on the Lanciano – San Vito Chietino railway line in the Abruzzo region, which currently operates under restrictive conditions due to the lack of an advanced signalling and train protection system. Consequently, operational regulations impose strict limits on train speed and service frequency, resulting in reduced operational and the Radio Block Centre (RBC). The block layout and associated speed constraints are defined according to operational and safety requirements, while radio communication continuity is ensured through the strategic positioning of GSM - R antennas connected by a redundant fibre - optic network.To evaluate the potential benefits of the proposed system, the current operational scenario is compared with a theoretical scenario in which ERTMS L2 is fully implemented. The analysis indicates that running time could be reduced by approximately one quarter, corresponding to a cumulative annual saving of about 87,000 hours at current demand levels, with notable socio - economic benefits. Additionally, the upgraded signalling system could increase service frequency by 200%. The results suggest that the introduction of ERTMS L2 on regional railway infrastructure can generate relevant improvements in operational performance, service capacity, and safety conditions. Furthermore, the study highlights the importance of adopting advanced signalling solutions as a strategy to enhance the efficiency and competitiveness of secondary railway lines within regional transport systems.
- 4 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Intelligent Vehicles
- Vol. 11 (6) , 732-742
Dynamic Analysis and Vibration Reduction of HTS Maglev Vehicle Using MRD Semi-Active Control
The limited intrinsic damping characteristics of the high-temperature superconducting (HTS) pinning maglev system pose challenges to effective vehicle vibration reduction under external disturbances such as permanent magnetic guideway (PMG) irregularities. This paper incorporates a magnetorheological damper (MRD) into the secondary suspension of HTS pinning maglev vehicles for semi-active vibration control. First, an MRD dynamic model considering the influence of current is presented, and a vehicle dynamic model developed based on an existing HTS pinning maglev test line and HTS-PMG relationship obtained from experiments. Subsequently, a semi-active vibration reduction co-simulation model is constructed using the skyhook (SH) linear continuous control strategy to evaluate the vertical and lateral dynamic performance of the car body under different operating speeds influenced by PMG irregularities. The results indicate that the semi-active damping strategy based on MRD ensures safe operation while effectively reducing carbody vibration, achieving over 50% vibration reduction rate at higher speeds, demonstrating its clear potential for improving the dynamic performance of HTS pinning maglev vehicles in practical engineering.
- 4 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Intelligent Vehicles
- Vol. 11 (6) , 732-742
Dynamic Analysis and Vibration Reduction of HTS Maglev Vehicle Using MRD Semi-Active Control
The limited intrinsic damping characteristics of the high-temperature superconducting (HTS) pinning maglev system pose challenges to effective vehicle vibration reduction under external disturbances such as permanent magnetic guideway (PMG) irregularities. This paper incorporates a magnetorheological damper (MRD) into the secondary suspension of HTS pinning maglev vehicles for semi-active vibration control. First, an MRD dynamic model considering the influence of current is presented, and a vehicle dynamic model developed based on an existing HTS pinning maglev test line and HTS-PMG relationship obtained from experiments. Subsequently, a semi-active vibration reduction co-simulation model is constructed using the skyhook (SH) linear continuous control strategy to evaluate the vertical and lateral dynamic performance of the car body under different operating speeds influenced by PMG irregularities. The results indicate that the semi-active damping strategy based on MRD ensures safe operation while effectively reducing carbody vibration, achieving over 50% vibration reduction rate at higher speeds, demonstrating its clear potential for improving the dynamic performance of HTS pinning maglev vehicles in practical engineering.
- 12 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. PP (10518223) , 1-5
Design and Dynamic Simulation of a V-Shaped HTS Maglev System for Urban Rail Transit
High-temperature superconducting (HTS) magnetic levitation (maglev) offers a promising solution for urban and high-speed transport due to its self-stabilizing levitation and negligible magnetic drag. This paper introduces a novel V-shaped permanent magnet guideway (PMG) that achieves stronger magnetic-flux concentration than conventional flat PMGs, enabling reduced rare-earth magnet usage while enhancing both lift and lateral guidance performance. A validated finite element model is used to characterize the electromagnetic forces, which are then incorporated into a dynamic model of an HTS maglev vehicle, including a carbody, five bogies, ten air springs, and sixty cryostat-mounted HTS bulk modules. Dynamic simulations across speeds of 60–160 km/h show enhanced levitation efficiency, improved lateral stability, and acceptable ride comfort and vibration. These results demonstrate the feasibility of the V-shaped PMG concept and provide both theoretical guidance and engineering evidence for its application in future HTS pinning maglev transportation systems.
- 12 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. PP (10518223) , 1-5
Design and Dynamic Simulation of a V-Shaped HTS Maglev System for Urban Rail Transit
High-temperature superconducting (HTS) magnetic levitation (maglev) offers a promising solution for urban and high-speed transport due to its self-stabilizing levitation and negligible magnetic drag. This paper introduces a novel V-shaped permanent magnet guideway (PMG) that achieves stronger magnetic-flux concentration than conventional flat PMGs, enabling reduced rare-earth magnet usage while enhancing both lift and lateral guidance performance. A validated finite element model is used to characterize the electromagnetic forces, which are then incorporated into a dynamic model of an HTS maglev vehicle, including a carbody, five bogies, ten air springs, and sixty cryostat-mounted HTS bulk modules. Dynamic simulations across speeds of 60–160 km/h show enhanced levitation efficiency, improved lateral stability, and acceptable ride comfort and vibration. These results demonstrate the feasibility of the V-shaped PMG concept and provide both theoretical guidance and engineering evidence for its application in future HTS pinning maglev transportation systems.
- Open Access
- 5 November 2025
- Published by Polish Mineral Engineering Society in Inżynieria Mineralna
- Vol. 2 (2)
Assessing Public Transport Accessibility through the PTQC System: The L'Aquila Case Study
Assessing public transport accessibility is vital for urban and regional planning. This paper examines the enhanced Austrian Public Transport Quality Classes (PTQCs) system, a standardized framework inspired by Swiss models, that assesses accessibility by integrating service frequency, transport network hierarchy, and pedestrian connectivity. The system classifies areas into seven quality levels from high-accessibility urban zones to minimally served peripheries. The study applies the enhanced PTQCs framework to L’Aquila, a central Italian city characterized by a complex topography, historical layout, and ongoing post-earthquake reconstruction. Using GIS tools, the analysis involved data collection, adaptation of criteria, and spatial evaluation. Results highlight disparities: while central corridors meet quality standards, peripheral and rebuilt districts suffer from limited service and connectivity. The analysis also adopted a comparative approach, with the Austrian city of St. Pölten and its surrounding area serving as a reference due to their comparable population and territorial size. The comparison highlighted L’Aquila’s functional gaps and confirmed the PTQCs system’s adaptability across different urban contexts. The study highlights the need for better intermodality and real-time data integration to address evolving transport demands. Its findings offer useful insights for policymakers and planners aiming to enhance public transport while promoting equity, growth, and sustainability.
- 5 November 2025
- Published by Polish Mineral Engineering Society in Inżynieria Mineralna
- Vol. 2 (2)
Open AccessAssessing Public Transport Accessibility through the PTQC System: The L'Aquila Case Study
Assessing public transport accessibility is vital for urban and regional planning. This paper examines the enhanced Austrian Public Transport Quality Classes (PTQCs) system, a standardized framework inspired by Swiss models, that assesses accessibility by integrating service frequency, transport network hierarchy, and pedestrian connectivity. The system classifies areas into seven quality levels from high-accessibility urban zones to minimally served peripheries. The study applies the enhanced PTQCs framework to L’Aquila, a central Italian city characterized by a complex topography, historical layout, and ongoing post-earthquake reconstruction. Using GIS tools, the analysis involved data collection, adaptation of criteria, and spatial evaluation. Results highlight disparities: while central corridors meet quality standards, peripheral and rebuilt districts suffer from limited service and connectivity. The analysis also adopted a comparative approach, with the Austrian city of St. Pölten and its surrounding area serving as a reference due to their comparable population and territorial size. The comparison highlighted L’Aquila’s functional gaps and confirmed the PTQCs system’s adaptability across different urban contexts. The study highlights the need for better intermodality and real-time data integration to address evolving transport demands. Its findings offer useful insights for policymakers and planners aiming to enhance public transport while promoting equity, growth, and sustainability.
- Open Access
- 5 November 2025
- Published by Polish Mineral Engineering Society in Inżynieria Mineralna
- Vol. 2 (2)
Data-Driven GHG Estimation for Local Public Transport Fleets: Pescara City Case Study
The transport sector is among the highest contributors to greenhouse gas (GHG) emissions. Consequently, the European Union has established ambitious targets to accelerate the transition to zero-emission mobility, with a specific focus on public transit fleets. Under current directives, urban bus fleets must reduce GHG emissions by 90% by 2030 and achieve full conversion to zero-emission vehicles by 2035. In this context, continuous monitoring of emission trends by public transport operators is crucial to ensure alignment with decarbonization goals. This study presents a pragmatic, data-driven methodology for estimating GHG emissions from local public transport (LPT) fleets. Designed to be both cost-effective and easily replicable, the approach leverages real-world operational data to generate context-specific emission estimates across various vehicle categories. The methodology integrates traffic volume data with detailed fleet characteristics, such as dimensional vehicle class, passenger capacity, energy carrier type, and engine emission standard, sourced from transport operators and national statistical databases. GHG emissions are quantified for CO₂, CH₄, and N₂O, and aggregated into CO₂-equivalent (CO₂e) metrics. Particulate matter emissions (PM₂.₅ and PM₁₀) are also assessed independently. Beyond quantifying energy consumption and GHG emissions, the study introduces a set of unitary performance indices. These incorporate passenger loads and operational parameters, enabling more precise and detailed per-capita assessments of environmental impact. The methodology is applied to a case study in Pescara, a medium-sized city in central Italy, using high-resolution data from the local transit operator TUA S.p.A. A sensitivity analysis on vehicle occupancy rates has assessed the impact on per-capita energy use and emissions, highlighting key environmental performance drivers. Additionally, a strategic scenario analysis has been carried out to evaluate fleet decarbonization pathways toward a zero-emission target by 2035. Owing to its low implementation cost and reliance on readily available data, the proposed method serves as a valuable decision-support tool for public transport operators. It supports both environmental impact assessments and the strategic planning of emission reduction policies, with strong potential for adaptation across diverse urban contexts.
- 5 November 2025
- Published by Polish Mineral Engineering Society in Inżynieria Mineralna
- Vol. 2 (2)
Open AccessData-Driven GHG Estimation for Local Public Transport Fleets: Pescara City Case Study
The transport sector is among the highest contributors to greenhouse gas (GHG) emissions. Consequently, the European Union has established ambitious targets to accelerate the transition to zero-emission mobility, with a specific focus on public transit fleets. Under current directives, urban bus fleets must reduce GHG emissions by 90% by 2030 and achieve full conversion to zero-emission vehicles by 2035. In this context, continuous monitoring of emission trends by public transport operators is crucial to ensure alignment with decarbonization goals. This study presents a pragmatic, data-driven methodology for estimating GHG emissions from local public transport (LPT) fleets. Designed to be both cost-effective and easily replicable, the approach leverages real-world operational data to generate context-specific emission estimates across various vehicle categories. The methodology integrates traffic volume data with detailed fleet characteristics, such as dimensional vehicle class, passenger capacity, energy carrier type, and engine emission standard, sourced from transport operators and national statistical databases. GHG emissions are quantified for CO₂, CH₄, and N₂O, and aggregated into CO₂-equivalent (CO₂e) metrics. Particulate matter emissions (PM₂.₅ and PM₁₀) are also assessed independently. Beyond quantifying energy consumption and GHG emissions, the study introduces a set of unitary performance indices. These incorporate passenger loads and operational parameters, enabling more precise and detailed per-capita assessments of environmental impact. The methodology is applied to a case study in Pescara, a medium-sized city in central Italy, using high-resolution data from the local transit operator TUA S.p.A. A sensitivity analysis on vehicle occupancy rates has assessed the impact on per-capita energy use and emissions, highlighting key environmental performance drivers. Additionally, a strategic scenario analysis has been carried out to evaluate fleet decarbonization pathways toward a zero-emission target by 2035. Owing to its low implementation cost and reliance on readily available data, the proposed method serves as a valuable decision-support tool for public transport operators. It supports both environmental impact assessments and the strategic planning of emission reduction policies, with strong potential for adaptation across diverse urban contexts.
- 20 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 35 (8) , 1-9
Dynamics of an HTS Pinning Maglev System on a Stability-Enhanced V-Shaped PMG for Urban Transit
High-temperature superconducting (HTS) pinning magnetic levitation (maglev) represents an emerging transportation technology that has attracted significant research interest owing to its intrinsic passive self-stabilization, low energy dissipation, and noise-free operation. Building upon the fundamental principles of HTS pinning, an innovative urban transit system has been designed and developed. In contrast to conventional HTS maglev transportation systems relying on flat-configured permanent-magnet guideways (PMGs), the proposed system incorporates an innovative V-shaped PMG configuration. This structural modification substantially amplifies both vertical levitation and lateral guidance forces, thereby enhancing operational performance and dynamic stability. The system’s technological advancements and dynamic characteristics have been systematically analyzed to assess vehicle dynamics for urban transit applications. Initial simulation results demonstrate technical viability and full compliance with established operational standards at target velocities. This research aims to establish a theoretical foundation for dynamic performance evaluation and engineering design of HTS pinning maglev transportation systems.
- 20 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 35 (8) , 1-9
Dynamics of an HTS Pinning Maglev System on a Stability-Enhanced V-Shaped PMG for Urban Transit
High-temperature superconducting (HTS) pinning magnetic levitation (maglev) represents an emerging transportation technology that has attracted significant research interest owing to its intrinsic passive self-stabilization, low energy dissipation, and noise-free operation. Building upon the fundamental principles of HTS pinning, an innovative urban transit system has been designed and developed. In contrast to conventional HTS maglev transportation systems relying on flat-configured permanent-magnet guideways (PMGs), the proposed system incorporates an innovative V-shaped PMG configuration. This structural modification substantially amplifies both vertical levitation and lateral guidance forces, thereby enhancing operational performance and dynamic stability. The system’s technological advancements and dynamic characteristics have been systematically analyzed to assess vehicle dynamics for urban transit applications. Initial simulation results demonstrate technical viability and full compliance with established operational standards at target velocities. This research aims to establish a theoretical foundation for dynamic performance evaluation and engineering design of HTS pinning maglev transportation systems.
- 22 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 34 (7) , 1-8
High-Temperature Superconducting Magnetic Levitation With the Halbach Array and V-Shaped Combined Permanent Magnet Guideway
The permanent magnet guideways (PMGs), serving as the sole magnetic field source for the high-temperature superconducting (HTS) pinning maglev system, exert a profound influence on the levitation performance of HTS bulks through its magnetic field distribution. To improve the levitation performance of HTS maglev systems, experiments to measure levitation and guidance forces were conducted using the 165-m test line PMG completed by Southwest Jiaotong University in 2021. Additionally, finite-element simulation models were developed. Subsequently, utilizing this simulation model as a foundation, a V-shaped Halbach array PMG was designed by combining a Halbach array with a “V” structure. Subsequently, the V-shaped PMG underwent simulation optimization with the goal of maximizing the levitation force. The optimized V-shaped PMG, when compared with the test line PMG with the same cross-sectional area, exhibits significant improvements. Under the zero-field cooling (FC) condition with a 15 mm lateral displacement, the levitation force experienced a 39.1% increase at the working height, while the guidance force showed a substantial 274.9% improvement. Similarly, under the FC condition with a 15-mm lateral displacement, there was a 43.6% increase in levitation force and a 186.1% increase in guidance force. These data unequivocally demonstrate the considerable application potential of the V-shaped PMG when compared with the test line PMG.
- 22 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 34 (7) , 1-8
High-Temperature Superconducting Magnetic Levitation With the Halbach Array and V-Shaped Combined Permanent Magnet Guideway
The permanent magnet guideways (PMGs), serving as the sole magnetic field source for the high-temperature superconducting (HTS) pinning maglev system, exert a profound influence on the levitation performance of HTS bulks through its magnetic field distribution. To improve the levitation performance of HTS maglev systems, experiments to measure levitation and guidance forces were conducted using the 165-m test line PMG completed by Southwest Jiaotong University in 2021. Additionally, finite-element simulation models were developed. Subsequently, utilizing this simulation model as a foundation, a V-shaped Halbach array PMG was designed by combining a Halbach array with a “V” structure. Subsequently, the V-shaped PMG underwent simulation optimization with the goal of maximizing the levitation force. The optimized V-shaped PMG, when compared with the test line PMG with the same cross-sectional area, exhibits significant improvements. Under the zero-field cooling (FC) condition with a 15 mm lateral displacement, the levitation force experienced a 39.1% increase at the working height, while the guidance force showed a substantial 274.9% improvement. Similarly, under the FC condition with a 15-mm lateral displacement, there was a 43.6% increase in levitation force and a 186.1% increase in guidance force. These data unequivocally demonstrate the considerable application potential of the V-shaped PMG when compared with the test line PMG.
- Open Access
- 20 July 2024
- Published by Springer Nature
- p. 640-648
Redesign of a Non-electrified Urban Railway Line with Hydrogen-Fuelled Trains
The passenger rail transportation system is of strategic importance to the decarbonization of the transportation sector. The use of green hydrogen is an environmentally sustainable option where highly polluting diesel trains currently operate on non-electrified rail lines. This paper proposes a novel adaptive power flow management strategy for urban railway trains powered by a hydrogen fuel cell stack and electrochemical batteries. The fuel cell stack is not dynamically controlled as usual, but it operates in on-off conditions to improve its overall efficiency. It always operates at the maximum efficiency operating point when it provides electrical power (on state) without following the load power variations. Furthermore, the state of the fuel cell stack depends on the state of charge of the electrochemical batteries which is the controlled quantity. As a case study, it is proposed a simulation of a suitably redesigned hydrogen-fuelled railway train operating, over an existing non-electrified line, for the L’Aquila (Italy) urban transportation service. The main components of the railway line and vehicle powertrain are designed, and the hydrogen consumption for railway operation is estimated.
- 20 July 2024
- Published by Springer Nature
- p. 640-648
Open AccessRedesign of a Non-electrified Urban Railway Line with Hydrogen-Fuelled Trains
The passenger rail transportation system is of strategic importance to the decarbonization of the transportation sector. The use of green hydrogen is an environmentally sustainable option where highly polluting diesel trains currently operate on non-electrified rail lines. This paper proposes a novel adaptive power flow management strategy for urban railway trains powered by a hydrogen fuel cell stack and electrochemical batteries. The fuel cell stack is not dynamically controlled as usual, but it operates in on-off conditions to improve its overall efficiency. It always operates at the maximum efficiency operating point when it provides electrical power (on state) without following the load power variations. Furthermore, the state of the fuel cell stack depends on the state of charge of the electrochemical batteries which is the controlled quantity. As a case study, it is proposed a simulation of a suitably redesigned hydrogen-fuelled railway train operating, over an existing non-electrified line, for the L’Aquila (Italy) urban transportation service. The main components of the railway line and vehicle powertrain are designed, and the hydrogen consumption for railway operation is estimated.
- Open Access
- 26 February 2024
- Published by MDPI AG in Infrastructures
- Vol. 9 (3) , 42
Walkability Infrastructures and Urban Rebalancing: The Case Study of L’Aquila City under Post-Earthquake Reconstruction
This paper describes the first results of the application of an innovative methodology for the development of a walkability overall index for urban street infrastructure, aimed at the application of urban design techniques to improve the urban form and its use by pedestrians. The general objective of the research is to identify the performance of the current city walkable network, to structure public policies and strategies consistent with it aimed at rebalancing settlements and infrastructure, and above all at the development of active mobility. The methodology defined integrates three approaches on walkability analysis: geometric–morphological, proximity, and sociality. In this paper, the analysis process related to the geometric–morphological component and partly to that of proximity will be described. It will be applied to the case study of the city of L’Aquila (Italy), a city undergoing reconstruction after the 2009 earthquake. From the first results of the application of the methodology to the case study, it emerges that the urban area analyzed is not capable of hosting walkable infrastructures unless urban design interventions are aimed at structuring an efficient network of pedestrian paths. In the future development of the study, it is expected to conclude the analysis of the proximity and social components, the other two groups of analysis considerations for walkability, which will complete the experimentation of the general methodology.
- 26 February 2024
- Published by MDPI AG in Infrastructures
- Vol. 9 (3) , 42
Open AccessWalkability Infrastructures and Urban Rebalancing: The Case Study of L’Aquila City under Post-Earthquake Reconstruction
This paper describes the first results of the application of an innovative methodology for the development of a walkability overall index for urban street infrastructure, aimed at the application of urban design techniques to improve the urban form and its use by pedestrians. The general objective of the research is to identify the performance of the current city walkable network, to structure public policies and strategies consistent with it aimed at rebalancing settlements and infrastructure, and above all at the development of active mobility. The methodology defined integrates three approaches on walkability analysis: geometric–morphological, proximity, and sociality. In this paper, the analysis process related to the geometric–morphological component and partly to that of proximity will be described. It will be applied to the case study of the city of L’Aquila (Italy), a city undergoing reconstruction after the 2009 earthquake. From the first results of the application of the methodology to the case study, it emerges that the urban area analyzed is not capable of hosting walkable infrastructures unless urban design interventions are aimed at structuring an efficient network of pedestrian paths. In the future development of the study, it is expected to conclude the analysis of the proximity and social components, the other two groups of analysis considerations for walkability, which will complete the experimentation of the general methodology.
- 21 August 2023
- Published by Springer Nature in Zeitschrift für angewandte Mathematik und Physik
- Vol. 74 (5) , 1-17
Analysis of transmission and reflection characteristics of linear plane waves in pantographic lattices
- 21 August 2023
- Published by Springer Nature in Zeitschrift für angewandte Mathematik und Physik
- Vol. 74 (5) , 1-17
Analysis of transmission and reflection characteristics of linear plane waves in pantographic lattices