Daniel Hugh Njal Barker
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Daniel Hugh Njal Barker has a total of 120 co-authors. Here are the top co-authors by number of shared publications:
- Stuart Henrys
GNS Science Lower Hutt New Zealand
14 shared publications - Nathan Bangs
Institute for Geophysics Jackson School of Geosciences University of Texas at Austin Austin TX USA
10 shared publications - Ryuta Arai
Research Institute for Marine Geodynamics Japan Agency for Marine‐Earth Science and Technology Yokohama Japan
9 shared publications - Shuichi Kodaira
Japan Agency for Marine‐Earth Science and Technology (JAMSTEC) Yokohama Japan
9 shared publications - Andrew Gase
Department of Geosciences Boise State University Boise Idaho USA
8 shared publications - Gou Fujie
Research Institute for Marine Geodynamics, Japan Agency for Marine-Earth Science and Technology (JAMSTEC), Yokohama, Japan
8 shared publications
Latest Publications
- Open Access
- 27 January 2025
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Solid Earth
- Vol. 130 (1)
Crustal Structure of the Hikurangi Subduction Zone Revealed by Four Decades of Onshore‐Offshore Seismic Data: Implications for the Dimensions and Slip Behavior of the Seismogenic Zone
Four decades of seismic reflection, onshore‐offshore and ocean‐bottom seismic data are integrated to constrain a high‐resolution 3‐D P‐wave velocity model of the Hikurangi subduction zone. Our model shows wavespeeds in the offshore forearc to be 0.5–1 km/s higher in south Hikurangi than in the central and northern segments (VP ≤ 4.5 km/s). Correlation with onshore geology and seismic reflection data sets suggest wavespeed variability in the overthrusting plate reflects the spatial distribution of Late Jurassic basement terranes. The crustal backstop is 25–35 km from the deformation front in south Hikurangi, but this distance abruptly increases to ∼105 km near Cape Turnagain. This change in backstop position coincides with the southern extent of shallow slow‐slip, most of which occurs updip of the backstop along the central and northern margin. These relationships suggest the crustal backstop may impact the down‐dip extent of shallow conditional stability on the megathrust and imply a high likelihood of near/trench‐breaching rupture in south Hikurangi. North of Cape Turnagain, the more landward position of the backstop, in conjunction with a possible reduction in the depth of the brittle ductile transition, reduces the down‐dip width of frictional locking between the southern (∼100 km) and central Hikurangi margin by up‐to 50%. Abrupt transitions in overthrusting plate structure are resolved near Cook Strait, Gisborne and across the northern Raukumara Peninsula, and appear related to tectonic inheritance and the evolution of the Hikurangi margin. Extremely low forearc wavespeeds resolved north of Gisborne played a key role in producing long durations of long‐period earthquake ground motions.
- 27 January 2025
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Solid Earth
- Vol. 130 (1)
Open AccessCrustal Structure of the Hikurangi Subduction Zone Revealed by Four Decades of Onshore‐Offshore Seismic Data: Implications for the Dimensions and Slip Behavior of the Seismogenic Zone
Four decades of seismic reflection, onshore‐offshore and ocean‐bottom seismic data are integrated to constrain a high‐resolution 3‐D P‐wave velocity model of the Hikurangi subduction zone. Our model shows wavespeeds in the offshore forearc to be 0.5–1 km/s higher in south Hikurangi than in the central and northern segments (VP ≤ 4.5 km/s). Correlation with onshore geology and seismic reflection data sets suggest wavespeed variability in the overthrusting plate reflects the spatial distribution of Late Jurassic basement terranes. The crustal backstop is 25–35 km from the deformation front in south Hikurangi, but this distance abruptly increases to ∼105 km near Cape Turnagain. This change in backstop position coincides with the southern extent of shallow slow‐slip, most of which occurs updip of the backstop along the central and northern margin. These relationships suggest the crustal backstop may impact the down‐dip extent of shallow conditional stability on the megathrust and imply a high likelihood of near/trench‐breaching rupture in south Hikurangi. North of Cape Turnagain, the more landward position of the backstop, in conjunction with a possible reduction in the depth of the brittle ductile transition, reduces the down‐dip width of frictional locking between the southern (∼100 km) and central Hikurangi margin by up‐to 50%. Abrupt transitions in overthrusting plate structure are resolved near Cook Strait, Gisborne and across the northern Raukumara Peninsula, and appear related to tectonic inheritance and the evolution of the Hikurangi margin. Extremely low forearc wavespeeds resolved north of Gisborne played a key role in producing long durations of long‐period earthquake ground motions.
- Open Access
- 22 November 2023
- Published by American Geophysical Union (AGU) in Geophysical Research Letters
- Vol. 50 (22)
Heterogeneous Crustal Structure of the Hikurangi Plateau Revealed by SHIRE Seismic Data: Origin and Implications for Plate Boundary Tectonics
Marine multichannel and wide‐angle seismic data constrain the distribution of seamounts, sediment cover sequence and crustal structure along a 460 km margin‐parallel transect of the Hikurangi Plateau. Seismic reflection data reveals five seamount up‐to 4.5 km high and 35–75 km wide, with heterogeneous internal velocity structure. Sediment cover decreases south‐to‐north from ∼4.5 km to ∼1–2 km. The Hikurangi Plateau crust (VP 5.5–7.5 km/s) is 11 ± 1 km thick in the south, but thins by 3–4 km further north (∼7–8 km). Gravity models constructed along two seismic lines show the reduction in crustal thickness persists further east, coinciding with a bathymetric scarp. Gravity data suggest the transition in crustal thickness may reflect spatial variability in deformation and lithospheric extension associated with plateau breakup. Variability in the thickness of subducting crust may contribute to differences in megathrust geometry, upper‐plate stress state and high‐rates of contraction and uplift along the southern Hikurangi margin.
- 22 November 2023
- Published by American Geophysical Union (AGU) in Geophysical Research Letters
- Vol. 50 (22)
Open AccessHeterogeneous Crustal Structure of the Hikurangi Plateau Revealed by SHIRE Seismic Data: Origin and Implications for Plate Boundary Tectonics
Marine multichannel and wide‐angle seismic data constrain the distribution of seamounts, sediment cover sequence and crustal structure along a 460 km margin‐parallel transect of the Hikurangi Plateau. Seismic reflection data reveals five seamount up‐to 4.5 km high and 35–75 km wide, with heterogeneous internal velocity structure. Sediment cover decreases south‐to‐north from ∼4.5 km to ∼1–2 km. The Hikurangi Plateau crust (VP 5.5–7.5 km/s) is 11 ± 1 km thick in the south, but thins by 3–4 km further north (∼7–8 km). Gravity models constructed along two seismic lines show the reduction in crustal thickness persists further east, coinciding with a bathymetric scarp. Gravity data suggest the transition in crustal thickness may reflect spatial variability in deformation and lithospheric extension associated with plateau breakup. Variability in the thickness of subducting crust may contribute to differences in megathrust geometry, upper‐plate stress state and high‐rates of contraction and uplift along the southern Hikurangi margin.
- Open Access
- 18 August 2023
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 9 (33) , eadh0150
Subducting volcaniclastic-rich upper crust supplies fluids for shallow megathrust and slow slip
Recurring slow slip along near-trench megathrust faults occurs at many subduction zones, but for unknown reasons, this process is not universal. Fluid overpressures are implicated in encouraging slow slip; however, links between slow slip, fluid content, and hydrogeology remain poorly known in natural systems. Three-dimensional seismic imaging and ocean drilling at the Hikurangi margin reveal a widespread and previously unknown fluid reservoir within the extensively hydrated (up to 47 vol % H 2 O) volcanic upper crust of the subducting Hikurangi Plateau large igneous province. This ~1.5 km thick volcaniclastic upper crust readily dewaters with subduction but retains half of its fluid content upon reaching regions with well-characterized slow slip. We suggest that volcaniclastic-rich upper crust at volcanic plateaus and seamounts is a major source of water that contributes to the fluid budget in subduction zones and may drive fluid overpressures along the megathrust that give rise to frequent shallow slow slip.
- 18 August 2023
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 9 (33) , eadh0150
Open AccessSubducting volcaniclastic-rich upper crust supplies fluids for shallow megathrust and slow slip
Recurring slow slip along near-trench megathrust faults occurs at many subduction zones, but for unknown reasons, this process is not universal. Fluid overpressures are implicated in encouraging slow slip; however, links between slow slip, fluid content, and hydrogeology remain poorly known in natural systems. Three-dimensional seismic imaging and ocean drilling at the Hikurangi margin reveal a widespread and previously unknown fluid reservoir within the extensively hydrated (up to 47 vol % H 2 O) volcanic upper crust of the subducting Hikurangi Plateau large igneous province. This ~1.5 km thick volcaniclastic upper crust readily dewaters with subduction but retains half of its fluid content upon reaching regions with well-characterized slow slip. We suggest that volcaniclastic-rich upper crust at volcanic plateaus and seamounts is a major source of water that contributes to the fluid budget in subduction zones and may drive fluid overpressures along the megathrust that give rise to frequent shallow slow slip.
- Open Access
- 17 August 2023
- Published by Wiley
Geophysical transect reveals seismic P-wave velocity structure of the northern Hikurangi margin, New Zealand
Most conceptual models for how fluids and sediment influence slip behavior and uplift along subduction margins are poorly constrained by geophysical observations. Given the complexity of subduction systems, overcoming this gap in knowledge will require a systems-level approach which uses high quality geophysical constraints. We present wide-angle, onshore-offshore seismic data collected along the northern Hikurangi margin, New Zealand, from which P-wave velocities were calculated using active- and passive-sources. A gravity model and reflection profiles were also assembled to create a complete, ~400 km long transect which images the incoming plate, down going slab, overthrusting forearc, and backarc rift. Velocities and gravity modelling help to constrain the lithology of the forearc basement to ~20 km depth. Upper plate lower crustal velocities and reflectivity point to the presence of underplated sediments immediately above the lithospheric mantle nose, suggesting that underplated sediments are driving uplift of the forearc. Comparing these results to geophysical images from the southern Hikurangi margin, we suggest that the backarc rift influences along-strike changes in the compressional stresses experienced by the forearc, driving changes in bending stresses within the subducting slab.
- 17 August 2023
- Published by Wiley
Open AccessGeophysical transect reveals seismic P-wave velocity structure of the northern Hikurangi margin, New Zealand
Most conceptual models for how fluids and sediment influence slip behavior and uplift along subduction margins are poorly constrained by geophysical observations. Given the complexity of subduction systems, overcoming this gap in knowledge will require a systems-level approach which uses high quality geophysical constraints. We present wide-angle, onshore-offshore seismic data collected along the northern Hikurangi margin, New Zealand, from which P-wave velocities were calculated using active- and passive-sources. A gravity model and reflection profiles were also assembled to create a complete, ~400 km long transect which images the incoming plate, down going slab, overthrusting forearc, and backarc rift. Velocities and gravity modelling help to constrain the lithology of the forearc basement to ~20 km depth. Upper plate lower crustal velocities and reflectivity point to the presence of underplated sediments immediately above the lithospheric mantle nose, suggesting that underplated sediments are driving uplift of the forearc. Comparing these results to geophysical images from the southern Hikurangi margin, we suggest that the backarc rift influences along-strike changes in the compressional stresses experienced by the forearc, driving changes in bending stresses within the subducting slab.
- Open Access
- 12 August 2023
- Published by Wiley
Geophysical transect reveals seismic P-wave velocity structure of the northern Hikurangi margin, New Zealand
Most conceptual models for how fluids and sediment influence slip behavior and uplift along subduction margins are poorly constrained by geophysical observations. Given the complexity of subduction systems, overcoming this gap in knowledge will require a systems-level approach which uses high quality geophysical constraints. We present wide-angle, onshore-offshore seismic data collected along the northern Hikurangi margin, New Zealand, from which P-wave velocities were calculated using active- and passive-sources. A gravity model and reflection profiles were also assembled to create a complete, ~400 km long transect which images the incoming plate, down going slab, overthrusting forearc, and backarc rift. Velocities and gravity modelling help to constrain the lithology of the forearc basement to ~20 km depth. Upper plate lower crustal velocities and reflectivity point to the presence of underplated sediments immediately above the lithospheric mantle nose, suggesting that underplated sediments are driving uplift of the forearc. Comparing these results to geophysical images from the southern Hikurangi margin, we suggest that the backarc rift influences along-strike changes in the compressional stresses experienced by the forearc, driving changes in bending stresses within the subducting slab.
- 12 August 2023
- Published by Wiley
Open AccessGeophysical transect reveals seismic P-wave velocity structure of the northern Hikurangi margin, New Zealand
Most conceptual models for how fluids and sediment influence slip behavior and uplift along subduction margins are poorly constrained by geophysical observations. Given the complexity of subduction systems, overcoming this gap in knowledge will require a systems-level approach which uses high quality geophysical constraints. We present wide-angle, onshore-offshore seismic data collected along the northern Hikurangi margin, New Zealand, from which P-wave velocities were calculated using active- and passive-sources. A gravity model and reflection profiles were also assembled to create a complete, ~400 km long transect which images the incoming plate, down going slab, overthrusting forearc, and backarc rift. Velocities and gravity modelling help to constrain the lithology of the forearc basement to ~20 km depth. Upper plate lower crustal velocities and reflectivity point to the presence of underplated sediments immediately above the lithospheric mantle nose, suggesting that underplated sediments are driving uplift of the forearc. Comparing these results to geophysical images from the southern Hikurangi margin, we suggest that the backarc rift influences along-strike changes in the compressional stresses experienced by the forearc, driving changes in bending stresses within the subducting slab.
- Open Access
- 7 March 2023
- Published by American Geophysical Union (AGU) in Geochemistry, Geophysics, Geosystems
- Vol. 24 (3)
The Norfolk Ridge: A Proximal Record of the Tonga‐Kermadec Subduction Initiation
Norfolk Ridge bounds the northeastern edge of the continent of Zealandia and is proximal to where Cenozoic Tonga‐Kermadec subduction initiation occurred. We present and analyze new seismic reflection, bathymetric and rock data from Norfolk Ridge that show it is composed of a thick sedimentary succession and that it was formed and acquired its present‐day ridge physiography and architecture during Eocene to Oligocene uplift, emergence and erosion. Contemporaneous subsidence of the adjacent New Caledonia Trough shaped the western slope of Norfolk Ridge and was accompanied by volcanism. Neogene extension along the eastern slope of Norfolk Ridge led to the opening of the Norfolk Basin. Our observations reveal little or no contractional deformation, in contrast to observations elsewhere in Zealandia, and are hence significant for understanding the mechanics of subduction initiation. We suggest that subduction nucleated north of Norfolk Ridge and propagated rapidly along the ridge during the period 40‐35 Ma, giving it a linear and narrow shape. Slab roll‐back following subduction initiation may have preserved the ridge and created its eastern flank. Our observations suggest that pre‐existing structures, which were likely inherited from Cretaceous Gondwana subduction, were well‐oriented to propagate rupture and create self‐sustaining subduction.
- 7 March 2023
- Published by American Geophysical Union (AGU) in Geochemistry, Geophysics, Geosystems
- Vol. 24 (3)
Open AccessThe Norfolk Ridge: A Proximal Record of the Tonga‐Kermadec Subduction Initiation
Norfolk Ridge bounds the northeastern edge of the continent of Zealandia and is proximal to where Cenozoic Tonga‐Kermadec subduction initiation occurred. We present and analyze new seismic reflection, bathymetric and rock data from Norfolk Ridge that show it is composed of a thick sedimentary succession and that it was formed and acquired its present‐day ridge physiography and architecture during Eocene to Oligocene uplift, emergence and erosion. Contemporaneous subsidence of the adjacent New Caledonia Trough shaped the western slope of Norfolk Ridge and was accompanied by volcanism. Neogene extension along the eastern slope of Norfolk Ridge led to the opening of the Norfolk Basin. Our observations reveal little or no contractional deformation, in contrast to observations elsewhere in Zealandia, and are hence significant for understanding the mechanics of subduction initiation. We suggest that subduction nucleated north of Norfolk Ridge and propagated rapidly along the ridge during the period 40‐35 Ma, giving it a linear and narrow shape. Slab roll‐back following subduction initiation may have preserved the ridge and created its eastern flank. Our observations suggest that pre‐existing structures, which were likely inherited from Cretaceous Gondwana subduction, were well‐oriented to propagate rupture and create self‐sustaining subduction.
- Open Access
- 29 November 2022
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Solid Earth
- Vol. 127 (12)
Using Seafloor Geodesy to Detect Vertical Deformation at the Hikurangi Subduction Zone: Insights From Self‐Calibrating Pressure Sensors and Ocean General Circulation Models
Seafloor pressure sensor data is emerging as a promising approach to resolve vertical displacement of the seafloor in the offshore reaches of subduction zones, particularly in response to slow slip events (SSEs), although such signals are challenging to resolve due to sensor drift and oceanographic signals. Constraining offshore SSE slip distribution is of key importance to understanding earthquake and tsunami hazards posed by subduction zones. We processed seafloor pressure data from January to October 2019 acquired at the Hikurangi subduction zone, offshore New Zealand, to estimate vertical displacement associated with a large SSE that occurred beneath the seafloor array. The experiment included three self‐calibrating sensors designed to remove sensor drift, which, together with ocean general circulation models, were essential to the identification and correction of long‐period ocean variability remaining in the data after applying traditional processing techniques. We estimate that long‐period oceanographic signals that were not synchronous between pressure sensors and reference sites influenced our inferred displacements by 0.3–2.6 cm, suggesting that regionally deployed reference sites alone may not provide sufficient ocean noise correction. After incorporating long‐period ocean variability corrections into the processing, we calculate 1.0–3.3 cm of uplift during the SSE offshore Gisborne at northern Hikurangi, and 1.1–2.7 cm of uplift offshore the Hawke's Bay area at central Hikurangi. Some Hawke Bay displacements detected by pressure sensors near the trench were delayed by 6 weeks compared to the timing of slip onset detected by onshore Global Navigation Satellite System sites, suggesting updip migration of the SSE.
- 29 November 2022
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Solid Earth
- Vol. 127 (12)
Open AccessUsing Seafloor Geodesy to Detect Vertical Deformation at the Hikurangi Subduction Zone: Insights From Self‐Calibrating Pressure Sensors and Ocean General Circulation Models
Seafloor pressure sensor data is emerging as a promising approach to resolve vertical displacement of the seafloor in the offshore reaches of subduction zones, particularly in response to slow slip events (SSEs), although such signals are challenging to resolve due to sensor drift and oceanographic signals. Constraining offshore SSE slip distribution is of key importance to understanding earthquake and tsunami hazards posed by subduction zones. We processed seafloor pressure data from January to October 2019 acquired at the Hikurangi subduction zone, offshore New Zealand, to estimate vertical displacement associated with a large SSE that occurred beneath the seafloor array. The experiment included three self‐calibrating sensors designed to remove sensor drift, which, together with ocean general circulation models, were essential to the identification and correction of long‐period ocean variability remaining in the data after applying traditional processing techniques. We estimate that long‐period oceanographic signals that were not synchronous between pressure sensors and reference sites influenced our inferred displacements by 0.3–2.6 cm, suggesting that regionally deployed reference sites alone may not provide sufficient ocean noise correction. After incorporating long‐period ocean variability corrections into the processing, we calculate 1.0–3.3 cm of uplift during the SSE offshore Gisborne at northern Hikurangi, and 1.1–2.7 cm of uplift offshore the Hawke's Bay area at central Hikurangi. Some Hawke Bay displacements detected by pressure sensors near the trench were delayed by 6 weeks compared to the timing of slip onset detected by onshore Global Navigation Satellite System sites, suggesting updip migration of the SSE.
- Open Access
- 18 January 2022
- Published by American Geophysical Union (AGU) in Geophysical Research Letters
- Vol. 49 (2)
Crustal Structure of the Hikurangi Margin From SHIRE Seismic Data and the Relationship Between Forearc Structure and Shallow Megathrust Slip Behavior
Marine multichannel and wide‐angle seismic data constrain crustal structure along a 530 km margin‐parallel transect of the Hikurangi subduction zone. The subducting Hikurangi Plateau crust (VP 5.0–7.4 km/s) is ∼1 km thicker (11 ± 1 km) and mantle velocities are ∼0.2 km/s higher (VP 8.3–8.5 km/s) beneath south/central Hikurangi relative to north Hikurangi. In the overthrusting plate, an abrupt 0.5 km/s south‐to‐north reduction in forearc wavespeeds occurs in concert with a change in seismic reflection character. We analyze legacy seismic data to show that the forearc transition likely reflects lateral variability in the updip extent of the Torlesse Backstop. Furthermore, we map this unit along‐strike and note a broad correlation between the backstop and down‐dip extent of shallow slow‐slip. We propose that the geological architecture of the overthrusting plate contributes to spatial variability in the location of shallow frictional transitions along the Hikurangi margin, impacting both seismic and tsunami hazard.
- 18 January 2022
- Published by American Geophysical Union (AGU) in Geophysical Research Letters
- Vol. 49 (2)
Open AccessCrustal Structure of the Hikurangi Margin From SHIRE Seismic Data and the Relationship Between Forearc Structure and Shallow Megathrust Slip Behavior
Marine multichannel and wide‐angle seismic data constrain crustal structure along a 530 km margin‐parallel transect of the Hikurangi subduction zone. The subducting Hikurangi Plateau crust (VP 5.0–7.4 km/s) is ∼1 km thicker (11 ± 1 km) and mantle velocities are ∼0.2 km/s higher (VP 8.3–8.5 km/s) beneath south/central Hikurangi relative to north Hikurangi. In the overthrusting plate, an abrupt 0.5 km/s south‐to‐north reduction in forearc wavespeeds occurs in concert with a change in seismic reflection character. We analyze legacy seismic data to show that the forearc transition likely reflects lateral variability in the updip extent of the Torlesse Backstop. Furthermore, we map this unit along‐strike and note a broad correlation between the backstop and down‐dip extent of shallow slow‐slip. We propose that the geological architecture of the overthrusting plate contributes to spatial variability in the location of shallow frictional transitions along the Hikurangi margin, impacting both seismic and tsunami hazard.
- Open Access
- 7 October 2021
- Published by American Geophysical Union (AGU) in Geophysical Research Letters
- Vol. 48 (19)
Generating High‐Fidelity Reflection Images Directly From Full‐Waveform Inversion: Hikurangi Subduction Zone Case Study
Full‐waveform inversion (FWI) can resolve subsurface physical properties to high resolutions, yet high‐performance computing resources have only recently made it practical to invert for high frequencies. A benefit of high‐frequency FWI is that recovered velocity models can be differentiated in space to produce high‐quality depth images (FWI images) of a comparable resolution to conventional reflection images.Here, we demonstrate the generation of high‐fidelity reflection images directly from the FWI process. We applied FWI up to 38 Hz to seismic data across the Hikurangi subduction margin. The resulting velocity models and FWI images reveal a complex faulting system, sediment deformation, and bottom‐simulating reflectors within the shallow accretionary prism. Our FWI images agree with conventional reflection images and better resolve horizons around the Pāpaku thrust fault. Thus, FWI imaging has the potential to replace conventional reflection imaging whilst also providing physical property models that assist geological interpretations.
- 7 October 2021
- Published by American Geophysical Union (AGU) in Geophysical Research Letters
- Vol. 48 (19)
Open AccessGenerating High‐Fidelity Reflection Images Directly From Full‐Waveform Inversion: Hikurangi Subduction Zone Case Study
Full‐waveform inversion (FWI) can resolve subsurface physical properties to high resolutions, yet high‐performance computing resources have only recently made it practical to invert for high frequencies. A benefit of high‐frequency FWI is that recovered velocity models can be differentiated in space to produce high‐quality depth images (FWI images) of a comparable resolution to conventional reflection images.Here, we demonstrate the generation of high‐fidelity reflection images directly from the FWI process. We applied FWI up to 38 Hz to seismic data across the Hikurangi subduction margin. The resulting velocity models and FWI images reveal a complex faulting system, sediment deformation, and bottom‐simulating reflectors within the shallow accretionary prism. Our FWI images agree with conventional reflection images and better resolve horizons around the Pāpaku thrust fault. Thus, FWI imaging has the potential to replace conventional reflection imaging whilst also providing physical property models that assist geological interpretations.
- Open Access
- 19 May 2021
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Solid Earth
- Vol. 126 (5)
Crustal Structure of the Northern Hikurangi Margin, New Zealand: Variable Accretion and Overthrusting Plate Strength Influenced by Rough Subduction
Exploring the structure of convergent margins is key to understanding megathrust slip behavior and tsunami generation. We present new wide‐angle and marine multichannel seismic data that constrain the crustal structure and accretion dynamics of the northern Hikurangi margin. The top of the basement of the Hikurangi Plateau is overlain by a rough, 2–3 km thick layer of volcanic cover with P‐wave velocities (VP) between 3 and 5 km/s. This volcanic cover contributes significantly to seismic reflectivity beneath the shallow subduction plate boundary. The frontal prism structure varies along‐strike from ∼25 km wide with imbricate thrust faults where accretion of trench sediments is undisrupted, to narrower (∼14 km) with slumps and branching, irregular thrust fault geometries, which may reflect lower sediment supply or past seamount collisions. A large thrust fault network in the inner prism with a seismically fast hanging wall indicates a mechanical boundary between a seismically faster deforming backstop and the seismically slower frontal prism. Near the coastline, VP increases between 2.8 and 4 km/s at 2–8 km depth and is 0.5–1.7 km/s slower than the southern Hikurangi margin. Low seismic wavespeeds and low vertical velocity gradients in the inner prism support the hypothesis that a weak overthrusting plate contributes to historic tsunami‐earthquakes and long duration seismic ground motion.
- 19 May 2021
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Solid Earth
- Vol. 126 (5)
Open AccessCrustal Structure of the Northern Hikurangi Margin, New Zealand: Variable Accretion and Overthrusting Plate Strength Influenced by Rough Subduction
Exploring the structure of convergent margins is key to understanding megathrust slip behavior and tsunami generation. We present new wide‐angle and marine multichannel seismic data that constrain the crustal structure and accretion dynamics of the northern Hikurangi margin. The top of the basement of the Hikurangi Plateau is overlain by a rough, 2–3 km thick layer of volcanic cover with P‐wave velocities (VP) between 3 and 5 km/s. This volcanic cover contributes significantly to seismic reflectivity beneath the shallow subduction plate boundary. The frontal prism structure varies along‐strike from ∼25 km wide with imbricate thrust faults where accretion of trench sediments is undisrupted, to narrower (∼14 km) with slumps and branching, irregular thrust fault geometries, which may reflect lower sediment supply or past seamount collisions. A large thrust fault network in the inner prism with a seismically fast hanging wall indicates a mechanical boundary between a seismically faster deforming backstop and the seismically slower frontal prism. Near the coastline, VP increases between 2.8 and 4 km/s at 2–8 km depth and is 0.5–1.7 km/s slower than the southern Hikurangi margin. Low seismic wavespeeds and low vertical velocity gradients in the inner prism support the hypothesis that a weak overthrusting plate contributes to historic tsunami‐earthquakes and long duration seismic ground motion.