Umesh Vasudeo Waghmare
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Umesh Vasudeo Waghmare has a total of 390 co-authors. Here are the top co-authors by number of shared publications:
- Kanishka Biswas
Jawaharlal Nehru Centre for Advanced Scientific Research (JNCASR) Jakkur P.O.
26 shared publications - Chinthamani Nagesa Ramachandra Rao
New Chemistry Unit JNCASR Bangalore INDIA
11 shared publications - Koushik Pal
Department of Physics, Indian Institute of Technology Kanpur, Kanpur 208016, India
7 shared publications - Lakshay Dheer
School of Advanced Materials, Jawaharlal Nehru Centre for Advanced Scientific Research, Jakkur, Bangalore 560064, India
7 shared publications - Raagya Arora
Los Alamos National Laboratory
7 shared publications - Ajay Soni
Indian Institute of Technology Mandi
6 shared publications
Latest Publications
- 29 October 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (44) , 48547-48557
Hidden Structures and Unusual Fourth-Nearest-Neighbor Interactions Drive Atomic Ordering in Thermoelectric AgSbTe2
AgSbTe2 is a leading mid-temperature thermoelectric material, with several doped variants achieving a figure of merit (zT) > 2. However, the microscopic mechanism by which dopants facilitate cation ordering for enhanced thermoelectric performance remains elusive. Here, we combine synchrotron X-ray pair distribution function analysis and machine-learned force field molecular dynamics simulations to investigate pristine AgSbTe2 and its highest-performing variant AgSb0.94Cd0.06Te2. Our analysis reveals ∼0.2 Å local rhombohedral distortions due to cation off-centering within the average rock-salt structure. Upon Cd doping, the fourth-nearest-neighbor (4NN) atom pair correlations are distinctly modified, evidencing the emergence of local cation ordering along . We find that the unusually strong long-range interactions along arising from multicenter p-bonding promote bonding coherence and drive 4NN cation ordering. By understanding how Cd reshapes 4NN correlations and bonding topology, we establish a direct link between local structural order, chemical bonding, and charge transport in AgSbTe2. Our insights offer a unified structural and chemical bonding-based framework for understanding dopant effects and guiding the rational design of next-generation AgSbTe2 thermoelectrics.
- 29 October 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (44) , 48547-48557
Hidden Structures and Unusual Fourth-Nearest-Neighbor Interactions Drive Atomic Ordering in Thermoelectric AgSbTe2
AgSbTe2 is a leading mid-temperature thermoelectric material, with several doped variants achieving a figure of merit (zT) > 2. However, the microscopic mechanism by which dopants facilitate cation ordering for enhanced thermoelectric performance remains elusive. Here, we combine synchrotron X-ray pair distribution function analysis and machine-learned force field molecular dynamics simulations to investigate pristine AgSbTe2 and its highest-performing variant AgSb0.94Cd0.06Te2. Our analysis reveals ∼0.2 Å local rhombohedral distortions due to cation off-centering within the average rock-salt structure. Upon Cd doping, the fourth-nearest-neighbor (4NN) atom pair correlations are distinctly modified, evidencing the emergence of local cation ordering along . We find that the unusually strong long-range interactions along arising from multicenter p-bonding promote bonding coherence and drive 4NN cation ordering. By understanding how Cd reshapes 4NN correlations and bonding topology, we establish a direct link between local structural order, chemical bonding, and charge transport in AgSbTe2. Our insights offer a unified structural and chemical bonding-based framework for understanding dopant effects and guiding the rational design of next-generation AgSbTe2 thermoelectrics.
- Open Access
- 8 September 2026
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 11 (37) , 54778-54781
Transformative Materials Research: Defining Conceptual Change across Scales
What qualifies as transformative materials research? In this Viewpoint, we use “transformative” to denote work that forces revision of underlying assumptions, enables generalization across systems, or reveals regimes inaccessible to existing frameworks. The term is widely invoked yet rarely defined with disciplinary precision. Perspectives spanning nanomaterials chemistry, catalysis, soft and bioinspired interfaces, and functional materials suggest that transformation occurs when new reaction mechanisms are uncovered, when structure–property relationships are redefined, and when operation under realistic chemical environments reveals fundamentally new governing mechanisms. Foundational insight, developmental refinement, and industrial realization constitute an interdependent value chain through which transformative discoveries mature into societal impact. Mistaking progress within a single component for a fundamental shift risks blurring the line between incremental refinement and genuine conceptual change. Transformation requires a conceptual discontinuity in at least one stage of this value chain, most commonly through foundational scientific insight, while the remaining stages enable its realization and broader impact. This Viewpoint argues that transformative materials research is defined less by topic than by intellectual pursuit, chemical and structural rigor, and sustained engagement with unexpected observations during mechanism discovery and eventual validation under realistic chemical environments and at scale.
- 8 September 2026
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 11 (37) , 54778-54781
Open AccessTransformative Materials Research: Defining Conceptual Change across Scales
What qualifies as transformative materials research? In this Viewpoint, we use “transformative” to denote work that forces revision of underlying assumptions, enables generalization across systems, or reveals regimes inaccessible to existing frameworks. The term is widely invoked yet rarely defined with disciplinary precision. Perspectives spanning nanomaterials chemistry, catalysis, soft and bioinspired interfaces, and functional materials suggest that transformation occurs when new reaction mechanisms are uncovered, when structure–property relationships are redefined, and when operation under realistic chemical environments reveals fundamentally new governing mechanisms. Foundational insight, developmental refinement, and industrial realization constitute an interdependent value chain through which transformative discoveries mature into societal impact. Mistaking progress within a single component for a fundamental shift risks blurring the line between incremental refinement and genuine conceptual change. Transformation requires a conceptual discontinuity in at least one stage of this value chain, most commonly through foundational scientific insight, while the remaining stages enable its realization and broader impact. This Viewpoint argues that transformative materials research is defined less by topic than by intellectual pursuit, chemical and structural rigor, and sustained engagement with unexpected observations during mechanism discovery and eventual validation under realistic chemical environments and at scale.
- Open Access
- 31 August 2026
- Published by Wiley in Advanced Science
- Vol. 13 (59)
Tunable p–p Interactions Along Linear Chains Control Metavalent Bonding in Chalcogenide Heterostructures
We present an analysis of heterostructures of alternating layers of rocksalt structures of metavalently bonded (MVB) group‐IV ( MX ) and ionic chalcogenides ( IX ) and show that bonding heterogeneity across their semiconductor‐insulator interface arises from the tunable p – p interactions. Using Born dynamical charge () as the key atomistic descriptor of MVB, we demonstrate that metavalent bonds parallel to the interfacial plane are unaffected by proximal ionic bonds as they constitute periodic (‐ X ‐ M ‐) n chains. In contrast, the bonds perpendicular to the interface ( ‐X‐M‐X‐I‐X‐ ) are spectacularly affected: characteristic of the MVB evolve to the bulk behavior within about a nm of the interface. With comparative analysis with I = Sr, Cd, and Sn, we establish that interatomic p – p orbital interactions along linear atomic chains with 5 contiguous (‐ X ‐ M‐ ) pairs govern the emergence, persistence, and suppression of MVB. The discontinuity at the interface has long‐range effects on the out‐of‐plane component of of ions, which are explained using a simple model of electrostatic screening. Energies of p orbitals of anions and cations, and their interactions along (‐ X ‐ M ‐) n chains are shown here to be essential to MVB, which result in the tunability of thermoelectric properties of interfacial hetero‐structures of chalcogenides.
- 31 August 2026
- Published by Wiley in Advanced Science
- Vol. 13 (59)
Open AccessTunable p–p Interactions Along Linear Chains Control Metavalent Bonding in Chalcogenide Heterostructures
We present an analysis of heterostructures of alternating layers of rocksalt structures of metavalently bonded (MVB) group‐IV ( MX ) and ionic chalcogenides ( IX ) and show that bonding heterogeneity across their semiconductor‐insulator interface arises from the tunable p – p interactions. Using Born dynamical charge () as the key atomistic descriptor of MVB, we demonstrate that metavalent bonds parallel to the interfacial plane are unaffected by proximal ionic bonds as they constitute periodic (‐ X ‐ M ‐) n chains. In contrast, the bonds perpendicular to the interface ( ‐X‐M‐X‐I‐X‐ ) are spectacularly affected: characteristic of the MVB evolve to the bulk behavior within about a nm of the interface. With comparative analysis with I = Sr, Cd, and Sn, we establish that interatomic p – p orbital interactions along linear atomic chains with 5 contiguous (‐ X ‐ M‐ ) pairs govern the emergence, persistence, and suppression of MVB. The discontinuity at the interface has long‐range effects on the out‐of‐plane component of of ions, which are explained using a simple model of electrostatic screening. Energies of p orbitals of anions and cations, and their interactions along (‐ X ‐ M ‐) n chains are shown here to be essential to MVB, which result in the tunability of thermoelectric properties of interfacial hetero‐structures of chalcogenides.
- Open Access
- 21 August 2026
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 12 (34)
Strong anharmonicity driven wave-like thermal transport and high thermoelectric performance in TlCu 5 Se 3
Thermal transport in crystalline solids generally occurs via particle-like phonon propagation. Here, we demonstrate the dominant unusual wave-like phonon transport and high thermoelectric figure-of-merit (zT) of ∼1.42 at 673 K in crystalline TlCu 5 Se 3 due to the strong anharmonicity exerted by confined Cu dynamic disorder and Tl rattling. TlCu 5 Se 3 shows an intrinsic ultralow lattice thermal conductivity of (κ L ) 0.3–0.2 W m −1 K −1 across the temperature range of 294–673 K. Density functional theory calculations and ab-initio molecular dynamics simulations reveal that strong lattice anharmonicity arises due to confined dynamic disorder of the Cu sublattice. The complex knot-like structure with strong anharmonicity reduces phonon lifetime below the Wigner limit, leading to substantial inter-band phonon coupling and a dominant wave-like coherence. By further tuning cationic vacancies to optimize electrical transport, we achieve an enhanced zT of ∼1.7 at 673 K in TlCu 5-x Se 3 (x = 0.03–0.07), demonstrating that confined ion dynamics not only maintains ultralow κ L but also enhances thermoelectric performance without compromising the stability.
- 21 August 2026
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 12 (34)
Open AccessStrong anharmonicity driven wave-like thermal transport and high thermoelectric performance in TlCu 5 Se 3
Thermal transport in crystalline solids generally occurs via particle-like phonon propagation. Here, we demonstrate the dominant unusual wave-like phonon transport and high thermoelectric figure-of-merit (zT) of ∼1.42 at 673 K in crystalline TlCu 5 Se 3 due to the strong anharmonicity exerted by confined Cu dynamic disorder and Tl rattling. TlCu 5 Se 3 shows an intrinsic ultralow lattice thermal conductivity of (κ L ) 0.3–0.2 W m −1 K −1 across the temperature range of 294–673 K. Density functional theory calculations and ab-initio molecular dynamics simulations reveal that strong lattice anharmonicity arises due to confined dynamic disorder of the Cu sublattice. The complex knot-like structure with strong anharmonicity reduces phonon lifetime below the Wigner limit, leading to substantial inter-band phonon coupling and a dominant wave-like coherence. By further tuning cationic vacancies to optimize electrical transport, we achieve an enhanced zT of ∼1.7 at 673 K in TlCu 5-x Se 3 (x = 0.03–0.07), demonstrating that confined ion dynamics not only maintains ultralow κ L but also enhances thermoelectric performance without compromising the stability.
- 28 July 2026
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 38 (15) , 8000-8011
Ferroelectric Instability Driven Local Atomic Off-Centering and Low Thermal Conductivity in a Topological Crystalline Insulator Sn3Bi0.7Te4
The synthesis of new topological quantum materials is necessary as it enables a fascinating platform for studying chemical bonding, crystal structure, and exotic transport phenomena in crystalline solids. The robust charge transport arising from the topologically protected nontrivial electronic states gives rise to intriguing quantum properties. However, quantum technologies at cryogenic temperatures require negligible thermal decoherence, where low thermal conducting components may have a vital role to play. Here, we have synthesized a topological crystalline insulator (TCI) Sn3Bi0.7Te4, which exhibits emergent quantum transport, namely, weak antilocalization and diffusive charge transport like electron–electron interaction, witnessed at low temperatures. Triply degenerate unstable polar optical modes dominated by Sn vibrations cause intrinsic ferroelectric instability in Sn3Bi0.7Te4, as tracked down by piezoresponse force microscopy (PFM). Synchrotron X-ray pair distribution function (X-PDF) analysis and first-principles density functional theory calculations suggest that the stereochemical expression of the 5s2 lone pair of Sn2+ triggers dynamic off-centering of the cation along the ⟨111⟩ crystallographic direction, breaking the symmetry locally. The ferroelectric instability, local lattice distortion, and polarizable soft chemical bonding result in a low lattice thermal conductivity of this TCI at low temperatures (2–300 K).
- 28 July 2026
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 38 (15) , 8000-8011
Ferroelectric Instability Driven Local Atomic Off-Centering and Low Thermal Conductivity in a Topological Crystalline Insulator Sn3Bi0.7Te4
The synthesis of new topological quantum materials is necessary as it enables a fascinating platform for studying chemical bonding, crystal structure, and exotic transport phenomena in crystalline solids. The robust charge transport arising from the topologically protected nontrivial electronic states gives rise to intriguing quantum properties. However, quantum technologies at cryogenic temperatures require negligible thermal decoherence, where low thermal conducting components may have a vital role to play. Here, we have synthesized a topological crystalline insulator (TCI) Sn3Bi0.7Te4, which exhibits emergent quantum transport, namely, weak antilocalization and diffusive charge transport like electron–electron interaction, witnessed at low temperatures. Triply degenerate unstable polar optical modes dominated by Sn vibrations cause intrinsic ferroelectric instability in Sn3Bi0.7Te4, as tracked down by piezoresponse force microscopy (PFM). Synchrotron X-ray pair distribution function (X-PDF) analysis and first-principles density functional theory calculations suggest that the stereochemical expression of the 5s2 lone pair of Sn2+ triggers dynamic off-centering of the cation along the ⟨111⟩ crystallographic direction, breaking the symmetry locally. The ferroelectric instability, local lattice distortion, and polarizable soft chemical bonding result in a low lattice thermal conductivity of this TCI at low temperatures (2–300 K).
- Open Access
- 24 July 2026
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (81) , e77221
Interface Induced Ferroelectricity in Designed CeO 2 , HfO 2 , ZrO 2 and YSZ Based Superlattice Heterostructures
The stabilization of ferroelectricity in non‐polar oxides remain a key challenge in the design of next‐generation functional materials, as existing approaches typically rely on chemical substitution, or metastable phases. Here, we report a universal and experimentally realizable route to emergent ferroelectricity based on interfacial symmetry frustration in oxide superlattices composed of dissimilar crystal symmetries. We design superlattice thin films heterostructures integrating cubic (CeO 2 , YSZ) and monoclinic (HfO 2 , ZrO 2 ) oxide layers showing spontaneous polarization that are non‐polar in their bulk phases. High‐resolution structural characterization confirms coherent heterointerfaces, while piezoresponse force microscopy and macroscopic electrical measurements establish switchable polarization. First‐principles calculations reveal that the crystalline symmetry mismatch across the interfaces breaks inversion symmetry and induces polar distortions through interface‐driven structural frustration, giving rise to emergent ferroelectricity without the need for chemical modification or metastable phase control. Our findings identify interfacial crystalline symmetry incompatibility as a general design principle for engineering ferroelectricity in superlattice heterostructures, opening new pathways for functional oxide electronics beyond conventional ferroelectric material systems.
- 24 July 2026
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (81) , e77221
Open AccessInterface Induced Ferroelectricity in Designed CeO 2 , HfO 2 , ZrO 2 and YSZ Based Superlattice Heterostructures
The stabilization of ferroelectricity in non‐polar oxides remain a key challenge in the design of next‐generation functional materials, as existing approaches typically rely on chemical substitution, or metastable phases. Here, we report a universal and experimentally realizable route to emergent ferroelectricity based on interfacial symmetry frustration in oxide superlattices composed of dissimilar crystal symmetries. We design superlattice thin films heterostructures integrating cubic (CeO 2 , YSZ) and monoclinic (HfO 2 , ZrO 2 ) oxide layers showing spontaneous polarization that are non‐polar in their bulk phases. High‐resolution structural characterization confirms coherent heterointerfaces, while piezoresponse force microscopy and macroscopic electrical measurements establish switchable polarization. First‐principles calculations reveal that the crystalline symmetry mismatch across the interfaces breaks inversion symmetry and induces polar distortions through interface‐driven structural frustration, giving rise to emergent ferroelectricity without the need for chemical modification or metastable phase control. Our findings identify interfacial crystalline symmetry incompatibility as a general design principle for engineering ferroelectricity in superlattice heterostructures, opening new pathways for functional oxide electronics beyond conventional ferroelectric material systems.
- 2 July 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (27) , 29537-29547
Multicentered p–s–p* Antibonding Interaction Induces Strong Anharmonicity and High Thermoelectric Performance in Complex Metal Chalcohalide Tl 5 Te 2 I
Metal chalcohalides are a fascinating new class of crystalline solids with a unique chemical bonding hierarchy which combines the notable stability of metal chalcogenides along with the enhanced electronic tunability of metal halides. Metal chalcohalides with their complex structures are promising candidates for thermoelectrics if they can exhibit halide-like low thermal conductivity alongside chalcogenide-like enhanced electrical conductivity. However, most metal chalcohalides mimic a wide band gap electronic structure similar to metal halides, limiting overall electrical transport and thus reducing their applicability in thermoelectrics. Here, we present a metal chalcohalide, Tl5Te2I, with a narrow band gap and degenerate semiconductor-like significant electrical conductivity. We explore the structural and chemical bonding attributes of Tl5Te2I and demonstrate it to be suitable for low thermal conductivity arising from its complex crystal structure with significant bonding hierarchy. Tl5Te2I, in its octahedral Tl sublattice, exhibits a multicentric bonded structural framework. This bonding feature allows delocalization of electrons, which permits symmetry-allowed three-center antibonding pz-s-pz and px/y-s-px/y interactions of I-Tl-I and Te-Tl-Te, respectively. These antibonding interactions at the top of the valence band near the Fermi level make interatomic force constants extremely soft and reduce the lattice thermal conductivity to the glass limit. With the combined effects of these features, Tl5Te2I exhibits an extraordinarily high p-type thermoelectric figure of merit of ∼1.2 at ∼650 K in its pristine form. Our investigations highlight the role of multicentric antibonding features to realize record-high thermoelectric performance in mixed anionic chalcohalides.
- 2 July 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (27) , 29537-29547
Multicentered p–s–p* Antibonding Interaction Induces Strong Anharmonicity and High Thermoelectric Performance in Complex Metal Chalcohalide Tl 5 Te 2 I
Metal chalcohalides are a fascinating new class of crystalline solids with a unique chemical bonding hierarchy which combines the notable stability of metal chalcogenides along with the enhanced electronic tunability of metal halides. Metal chalcohalides with their complex structures are promising candidates for thermoelectrics if they can exhibit halide-like low thermal conductivity alongside chalcogenide-like enhanced electrical conductivity. However, most metal chalcohalides mimic a wide band gap electronic structure similar to metal halides, limiting overall electrical transport and thus reducing their applicability in thermoelectrics. Here, we present a metal chalcohalide, Tl5Te2I, with a narrow band gap and degenerate semiconductor-like significant electrical conductivity. We explore the structural and chemical bonding attributes of Tl5Te2I and demonstrate it to be suitable for low thermal conductivity arising from its complex crystal structure with significant bonding hierarchy. Tl5Te2I, in its octahedral Tl sublattice, exhibits a multicentric bonded structural framework. This bonding feature allows delocalization of electrons, which permits symmetry-allowed three-center antibonding pz-s-pz and px/y-s-px/y interactions of I-Tl-I and Te-Tl-Te, respectively. These antibonding interactions at the top of the valence band near the Fermi level make interatomic force constants extremely soft and reduce the lattice thermal conductivity to the glass limit. With the combined effects of these features, Tl5Te2I exhibits an extraordinarily high p-type thermoelectric figure of merit of ∼1.2 at ∼650 K in its pristine form. Our investigations highlight the role of multicentric antibonding features to realize record-high thermoelectric performance in mixed anionic chalcohalides.
- 8 April 2026
- Published by Wiley in Angewandte Chemie
- Vol. 138 (21) , e3779576
Donor‐Acceptor Stacks in Flexible Porous Coordination Polymers Toward Room‐Temperature Ferroelectricity
Ferroelectricity has long been of great scientific interest due to its tremendous potential for information storage technologies and wide‐ranging applications. Metal‐organic frameworks (MOFs) or porous coordination polymers (PCPs), with their structural tunability and dynamic host‐guest chemistry, offer a powerful platform for engineering next‐generation ferroelectrics. However, progress in ferroelectric MOFs/PCPs has been limited by their intrinsically weak polarization, restricting the realization of non‐trivial switchable ferroelectricity feasible at room temperature. We address this limitation, reporting a series of flexible PCPs with mixed donor‐acceptor (D‐A) stacks designed to achieve room‐temperature ferroelectricity via strong charge‐transfer interactions. The 3D Zn‐based PCP, {[Zn( o ‐phen)(2,6‐ndc)]·DMF} n , having a supramolecular dynamic nano‐space for D‐A stacking, exhibits intrinsic flexibility that endows structural adaptation to the guest molecules of varying shape, size, and chemical nature. The encapsulation of electron‐rich aromatic amine guests like N , N ′‐dimethyl aniline and N , N ′‐dimethyl‐ p ‐toluidine results in the formation of extended D‐A stacks with acceptor motifs of the framework along a particular crystallographic axis. Peierls‐like distortion of these 1D extended D‐A stacks gives rise to spontaneous polarization, ultimately resulting in room‐temperature ferroelectricity. We furthermore show that the ferroelectric features of the PCP are closely related to the packing and geometry of the guest molecules incorporated.
- 8 April 2026
- Published by Wiley in Angewandte Chemie
- Vol. 138 (21) , e3779576
Donor‐Acceptor Stacks in Flexible Porous Coordination Polymers Toward Room‐Temperature Ferroelectricity
Ferroelectricity has long been of great scientific interest due to its tremendous potential for information storage technologies and wide‐ranging applications. Metal‐organic frameworks (MOFs) or porous coordination polymers (PCPs), with their structural tunability and dynamic host‐guest chemistry, offer a powerful platform for engineering next‐generation ferroelectrics. However, progress in ferroelectric MOFs/PCPs has been limited by their intrinsically weak polarization, restricting the realization of non‐trivial switchable ferroelectricity feasible at room temperature. We address this limitation, reporting a series of flexible PCPs with mixed donor‐acceptor (D‐A) stacks designed to achieve room‐temperature ferroelectricity via strong charge‐transfer interactions. The 3D Zn‐based PCP, {[Zn( o ‐phen)(2,6‐ndc)]·DMF} n , having a supramolecular dynamic nano‐space for D‐A stacking, exhibits intrinsic flexibility that endows structural adaptation to the guest molecules of varying shape, size, and chemical nature. The encapsulation of electron‐rich aromatic amine guests like N , N ′‐dimethyl aniline and N , N ′‐dimethyl‐ p ‐toluidine results in the formation of extended D‐A stacks with acceptor motifs of the framework along a particular crystallographic axis. Peierls‐like distortion of these 1D extended D‐A stacks gives rise to spontaneous polarization, ultimately resulting in room‐temperature ferroelectricity. We furthermore show that the ferroelectric features of the PCP are closely related to the packing and geometry of the guest molecules incorporated.
- 8 April 2026
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 65 (21) , e3779576
Donor‐Acceptor Stacks in Flexible Porous Coordination Polymers Toward Room‐Temperature Ferroelectricity
Ferroelectricity has long been of great scientific interest due to its tremendous potential for information storage technologies and wide‐ranging applications. Metal‐organic frameworks (MOFs) or porous coordination polymers (PCPs), with their structural tunability and dynamic host‐guest chemistry, offer a powerful platform for engineering next‐generation ferroelectrics. However, progress in ferroelectric MOFs/PCPs has been limited by their intrinsically weak polarization, restricting the realization of non‐trivial switchable ferroelectricity feasible at room temperature. We address this limitation, reporting a series of flexible PCPs with mixed donor‐acceptor (D‐A) stacks designed to achieve room‐temperature ferroelectricity via strong charge‐transfer interactions. The 3D Zn‐based PCP, {[Zn( o ‐phen)(2,6‐ndc)]·DMF} n , having a supramolecular dynamic nano‐space for D‐A stacking, exhibits intrinsic flexibility that endows structural adaptation to the guest molecules of varying shape, size, and chemical nature. The encapsulation of electron‐rich aromatic amine guests like N , N ′‐dimethyl aniline and N , N ′‐dimethyl‐ p ‐toluidine results in the formation of extended D‐A stacks with acceptor motifs of the framework along a particular crystallographic axis. Peierls‐like distortion of these 1D extended D‐A stacks gives rise to spontaneous polarization, ultimately resulting in room‐temperature ferroelectricity. We furthermore show that the ferroelectric features of the PCP are closely related to the packing and geometry of the guest molecules incorporated.
- 8 April 2026
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 65 (21) , e3779576
Donor‐Acceptor Stacks in Flexible Porous Coordination Polymers Toward Room‐Temperature Ferroelectricity
Ferroelectricity has long been of great scientific interest due to its tremendous potential for information storage technologies and wide‐ranging applications. Metal‐organic frameworks (MOFs) or porous coordination polymers (PCPs), with their structural tunability and dynamic host‐guest chemistry, offer a powerful platform for engineering next‐generation ferroelectrics. However, progress in ferroelectric MOFs/PCPs has been limited by their intrinsically weak polarization, restricting the realization of non‐trivial switchable ferroelectricity feasible at room temperature. We address this limitation, reporting a series of flexible PCPs with mixed donor‐acceptor (D‐A) stacks designed to achieve room‐temperature ferroelectricity via strong charge‐transfer interactions. The 3D Zn‐based PCP, {[Zn( o ‐phen)(2,6‐ndc)]·DMF} n , having a supramolecular dynamic nano‐space for D‐A stacking, exhibits intrinsic flexibility that endows structural adaptation to the guest molecules of varying shape, size, and chemical nature. The encapsulation of electron‐rich aromatic amine guests like N , N ′‐dimethyl aniline and N , N ′‐dimethyl‐ p ‐toluidine results in the formation of extended D‐A stacks with acceptor motifs of the framework along a particular crystallographic axis. Peierls‐like distortion of these 1D extended D‐A stacks gives rise to spontaneous polarization, ultimately resulting in room‐temperature ferroelectricity. We furthermore show that the ferroelectric features of the PCP are closely related to the packing and geometry of the guest molecules incorporated.
- Open Access
- 24 March 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
Modulation of quantum geometry and its coupling to pseudo-electric field by dynamic strain
Two-dimensional materials are a fertile ground for exploring quantum geometric phenomena, with Berry curvature and its first moment, the Berry curvature dipole, playing a central role in their electronic response. These geometric properties influence electronic transport and result in the anomalous and nonlinear Hall effects, and are typically controlled using static electric fields or strain. However, the possibility of modulating quantum geometric quantities in real-time remains unexplored. Here, we demonstrate the dynamic modulation of Berry curvature and its moments, as well as the generation of a pseudo-electric field and their coupling. By placing heterostructures on a membrane, we introduce oscillatory strain together with an in-plane AC electric field and measure Hall signals that are modulated at linear combinations of the frequencies of strain and electric field. We also present direct experimental and theoretical evidence for coupling between pseudo-electric field and quantum geometry that results in an unusual dynamic strain-induced Hall response. This approach opens up a new pathway for controlling quantum geometry on demand, moving beyond conventional static perturbations. The coupling of the pseudo-electric field with Berry curvature provides a framework for external electric field-free anomalous Hall response and opens new avenues for probing the topological properties.
- 24 March 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
Open AccessModulation of quantum geometry and its coupling to pseudo-electric field by dynamic strain
Two-dimensional materials are a fertile ground for exploring quantum geometric phenomena, with Berry curvature and its first moment, the Berry curvature dipole, playing a central role in their electronic response. These geometric properties influence electronic transport and result in the anomalous and nonlinear Hall effects, and are typically controlled using static electric fields or strain. However, the possibility of modulating quantum geometric quantities in real-time remains unexplored. Here, we demonstrate the dynamic modulation of Berry curvature and its moments, as well as the generation of a pseudo-electric field and their coupling. By placing heterostructures on a membrane, we introduce oscillatory strain together with an in-plane AC electric field and measure Hall signals that are modulated at linear combinations of the frequencies of strain and electric field. We also present direct experimental and theoretical evidence for coupling between pseudo-electric field and quantum geometry that results in an unusual dynamic strain-induced Hall response. This approach opens up a new pathway for controlling quantum geometry on demand, moving beyond conventional static perturbations. The coupling of the pseudo-electric field with Berry curvature provides a framework for external electric field-free anomalous Hall response and opens new avenues for probing the topological properties.