Inna Kurbatska
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Inna Kurbatska has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
- Vjaceslavs Bobrovs
Institute of Photonics, Electronics and Telecommunications, Riga Technical University, Azenes Street 12, LV-1048 Riga, Latvia
7 shared publications - Sandis Spolitis
Institute of Photonics, Electronics and Telecommunications, Riga Technical University, Riga, Latvia
6 shared publications Anita Alsevska
3 shared publications- Toms Salgals
Riga Technical University
3 shared publications Lilita Gegere
2 shared publications- Armands Ostrovskis
Institute of Photonics, Electronics and Telecommunications, Riga Technical University, Riga, Latvia
1 shared publication
Latest Publications
- Open Access
- 5 October 2022
- Published by Wiley in Modelling and Simulation in Engineering
- Vol. 2022, 1-14
Designing of Fiber Bragg Gratings for Long-Distance Optical Fiber Sensing Networks
Most optical sensors on the market are optical fiber Bragg grating (FBG) sensors with low reflectivity (typically 7-40%) and low side-lobe suppression (SLS) ratio (typically SLS <15 dB), which prevents these sensors from being effectively used for long-distance remote monitoring and sensor network solutions. This research is based on designing the optimal grating structure of FBG sensors and estimating their optimal apodization parameters necessary for sensor networks and long-distance monitoring solutions. Gaussian, sine, and raised sine apodizations are studied to achieve the main requirements, which are maximally high reflectivity (at least 90%) and side-lobe suppression (at least 20 dB), as well as maximally narrow bandwidth (FWHM<0.2 nm) and FBGs with uniform (without apodization). Results gathered in this research propose high-efficiency FBG grating apodizations, which can be further physically realized for optical sensor networks and long-distance (at least 40 km) monitoring solutions.
- 5 October 2022
- Published by Wiley in Modelling and Simulation in Engineering
- Vol. 2022, 1-14
Open AccessDesigning of Fiber Bragg Gratings for Long-Distance Optical Fiber Sensing Networks
Most optical sensors on the market are optical fiber Bragg grating (FBG) sensors with low reflectivity (typically 7-40%) and low side-lobe suppression (SLS) ratio (typically SLS <15 dB), which prevents these sensors from being effectively used for long-distance remote monitoring and sensor network solutions. This research is based on designing the optimal grating structure of FBG sensors and estimating their optimal apodization parameters necessary for sensor networks and long-distance monitoring solutions. Gaussian, sine, and raised sine apodizations are studied to achieve the main requirements, which are maximally high reflectivity (at least 90%) and side-lobe suppression (at least 20 dB), as well as maximally narrow bandwidth (FWHM<0.2 nm) and FBGs with uniform (without apodization). Results gathered in this research propose high-efficiency FBG grating apodizations, which can be further physically realized for optical sensor networks and long-distance (at least 40 km) monitoring solutions.
- 1 December 2021
- Published by Elsevier in Optical Fiber Technology
- Vol. 67, 102697
The architecture of hybrid mm-wave ARoF Super-PON system for 5G implementation
- 1 December 2021
- Published by Elsevier in Optical Fiber Technology
- Vol. 67, 102697
The architecture of hybrid mm-wave ARoF Super-PON system for 5G implementation
- 27 July 2020
- Published by Riga Technical University
Evaluation of Modulation Formats for the Next Generation Fiber Optical Access Telecommunication Systems
Exponential growth of the data traffic, high requirements of business users to the security and symmetrical transmission data rate, as well as utilization of access networks for backhaul and fronthaul applications are driving demands on next-generation access networks – fiber-optical access networks with improved parameters (bitrate and transmission distance) in comparison to the solution based on copper cables. However, there is a number of technological issues that have to be solved ensuring high data rate transmission – the choice of the suitable modulation format, the cost and availability of the wideband elements of transmission system, as well as compatibility of the different transmission data rates. In the Thesis, the most suitable data modulation formats for utilization in wavelength division multiplexed passive optical networks (WDM-PONs) are chosen as well as the main performance-affecting factors are investigated. As a result, the model of mixed (with 12.5 Gbit/s and 25 Gbit/s data transmission rates) WDM-PON access telecommunication system is developed (including the approach of modelling of Mach-Zehnder modulator frequency response). The solution of mixed WDM-PON access network with values and limits of the main performance-affecting factors is proposed.
- 27 July 2020
- Published by Riga Technical University
Evaluation of Modulation Formats for the Next Generation Fiber Optical Access Telecommunication Systems
Exponential growth of the data traffic, high requirements of business users to the security and symmetrical transmission data rate, as well as utilization of access networks for backhaul and fronthaul applications are driving demands on next-generation access networks – fiber-optical access networks with improved parameters (bitrate and transmission distance) in comparison to the solution based on copper cables. However, there is a number of technological issues that have to be solved ensuring high data rate transmission – the choice of the suitable modulation format, the cost and availability of the wideband elements of transmission system, as well as compatibility of the different transmission data rates. In the Thesis, the most suitable data modulation formats for utilization in wavelength division multiplexed passive optical networks (WDM-PONs) are chosen as well as the main performance-affecting factors are investigated. As a result, the model of mixed (with 12.5 Gbit/s and 25 Gbit/s data transmission rates) WDM-PON access telecommunication system is developed (including the approach of modelling of Mach-Zehnder modulator frequency response). The solution of mixed WDM-PON access network with values and limits of the main performance-affecting factors is proposed.
- 27 July 2020
- Published by Riga Technical University
Modulācijas formātu novērtējums nākamās paaudzes šķiedru optiskajām piekļuves sakaru sistēmām
Atsaucoties uz lietotāju datu eksponenciālo pieaugumu, augstām biznesa klientu prasībām attiecībā uz drošību un simetrisko datu pārraides ātrumu, kā arī piekļuves tīklu lietojumu dažādu tīklu iekšsavienojumiem un starpsavienojumiem, pašlaik ir novērojams izteikts pieprasījums pēc nākamās paaudzes piekļuves tīkliem – šķiedru optiskajiem piekļuves tīkliem ar uzlabotiem parametriem (datu pārraides ātrumu un attālumu), salīdzinot ar risinājumiem, kas balstīti uz vara kabeļiem. Tomēr pastāv virkne tehnoloģisku grūtību, ar ko ir jāsaskaras, nodrošinot liela ātruma datu pārraidi. Respektīvi, atbilstoša modulācijas formāta izvēle, platjoslas pārraides sistēmas elementu pieejamība un izmaksas, kā arī dažādu datu pārraides ātrumu savietojamība. Veiktajā pētījumā izvēlēti piemērotāki datu modulācijas formāti pielietojumam viļņgarumdales blīvētos pasīvajos optiskajos tīklos (wavelength division multiplexed passive optical networks, WDM-PONs), kā arī noteikti attiecīgās pārraides sistēmas veiktspēju galvenie ietekmējošie faktori. Rezultātā izstrādāts kombinētas (ar 12,5 Gbit/s un 25 Gbit/s datu pārraides ātrumiem) WDM-PON piekļuves sakaru sistēmas modelis (tai skaitā – Maha–Cendera modulatora amplitūdas-frekvenču raksturojuma modelēšanas paņēmiens). Promocijas darbā ir piedāvāts arī kombinētais WDM-PON risinājums, kam ir noteikti atbilstoši datu modulācijas formāti un nozīmīgāko ietekmējošo faktoru vērtības vai pielaides robežas.
- 27 July 2020
- Published by Riga Technical University
Modulācijas formātu novērtējums nākamās paaudzes šķiedru optiskajām piekļuves sakaru sistēmām
Atsaucoties uz lietotāju datu eksponenciālo pieaugumu, augstām biznesa klientu prasībām attiecībā uz drošību un simetrisko datu pārraides ātrumu, kā arī piekļuves tīklu lietojumu dažādu tīklu iekšsavienojumiem un starpsavienojumiem, pašlaik ir novērojams izteikts pieprasījums pēc nākamās paaudzes piekļuves tīkliem – šķiedru optiskajiem piekļuves tīkliem ar uzlabotiem parametriem (datu pārraides ātrumu un attālumu), salīdzinot ar risinājumiem, kas balstīti uz vara kabeļiem. Tomēr pastāv virkne tehnoloģisku grūtību, ar ko ir jāsaskaras, nodrošinot liela ātruma datu pārraidi. Respektīvi, atbilstoša modulācijas formāta izvēle, platjoslas pārraides sistēmas elementu pieejamība un izmaksas, kā arī dažādu datu pārraides ātrumu savietojamība. Veiktajā pētījumā izvēlēti piemērotāki datu modulācijas formāti pielietojumam viļņgarumdales blīvētos pasīvajos optiskajos tīklos (wavelength division multiplexed passive optical networks, WDM-PONs), kā arī noteikti attiecīgās pārraides sistēmas veiktspēju galvenie ietekmējošie faktori. Rezultātā izstrādāts kombinētas (ar 12,5 Gbit/s un 25 Gbit/s datu pārraides ātrumiem) WDM-PON piekļuves sakaru sistēmas modelis (tai skaitā – Maha–Cendera modulatora amplitūdas-frekvenču raksturojuma modelēšanas paņēmiens). Promocijas darbā ir piedāvāts arī kombinētais WDM-PON risinājums, kam ir noteikti atbilstoši datu modulācijas formāti un nozīmīgāko ietekmējošo faktoru vērtības vai pielaides robežas.
- 1 December 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 728-734
Research of PAM-4 Modulated WDM-PON Architecture for 5G Millimeter-wave Hybrid Photonics-wireless Interface
In this paper 4-level pulse amplitude modulation (PAM-4) analog radio over fiber (A-RoF) transmission through wavelength division multiplexed passive optical network (WDM-PON)architecture for future broadband fifth-generation (5G/5G+) cellular mobile communication networks is proposed. The goal of future cellular mobile communication infrastructures of the next decade is retaining at least one-third of global market share in Europe regarding future network equipment and support higher spectral efficiency providing ubiquitous access to wider spectrum applications in order to reduce the network energy consumption.An alternative solution that offers a good trade-off between performance and complexity is multi-level signaling formats such as PAM-M, where multiple digital bits are encoded into different signal amplitude levels or symbols. It is a relatively easy and effective way to double the bitrate of data transmission link by the implementation of PAM-4 modulation technique instead of well-known non-return-to-zero on-off-keying (NRZ-OOK). In this paper, we investigated the use of PAM-4 modulation format for A-RoF signals transmission through the passive optical network (PON), which is standardized to NGPON2. In our research, we show the possible A-RoF transmitter implementation into improved fiber-optical line terminals (OLT), enabling to generate PAM-4 modulated signal and perform mm-wave signal transmission over the WDM-PON optical distribution network.
- 1 December 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 728-734
Research of PAM-4 Modulated WDM-PON Architecture for 5G Millimeter-wave Hybrid Photonics-wireless Interface
In this paper 4-level pulse amplitude modulation (PAM-4) analog radio over fiber (A-RoF) transmission through wavelength division multiplexed passive optical network (WDM-PON)architecture for future broadband fifth-generation (5G/5G+) cellular mobile communication networks is proposed. The goal of future cellular mobile communication infrastructures of the next decade is retaining at least one-third of global market share in Europe regarding future network equipment and support higher spectral efficiency providing ubiquitous access to wider spectrum applications in order to reduce the network energy consumption.An alternative solution that offers a good trade-off between performance and complexity is multi-level signaling formats such as PAM-M, where multiple digital bits are encoded into different signal amplitude levels or symbols. It is a relatively easy and effective way to double the bitrate of data transmission link by the implementation of PAM-4 modulation technique instead of well-known non-return-to-zero on-off-keying (NRZ-OOK). In this paper, we investigated the use of PAM-4 modulation format for A-RoF signals transmission through the passive optical network (PON), which is standardized to NGPON2. In our research, we show the possible A-RoF transmitter implementation into improved fiber-optical line terminals (OLT), enabling to generate PAM-4 modulated signal and perform mm-wave signal transmission over the WDM-PON optical distribution network.
- Open Access
- 30 October 2019
- Published by IntechOpen
Research of M-PAM and Duobinary Modulation Formats for Use in High-Speed WDM-PON Systems
The exponential growth of Internet data traffic and progress of Information and Communication Technology (ICT) sector pushes hard the telecommunication infrastructure for upgrading the transmission data rate. Wavelength division multiplexed passive optical networks (WDM-PONs) can be the next generation solution for nowadays problems which are related to transmission capacity. Next-generation WDM-PON systems based on mixed wavelength transmitters are expected to become more cost-efficient at high per user data rates, e.g., over 10 Gbit/s per channel. Important advantage of this technology is to set various channel spacing and use different modulation formats to increase spectral efficiency in the same time and provide different transmission speeds for end user, based on pay-as-you-grow approach. Therefore, several modulation formats like non-return to zero (NRZ) also called 2-level pulse-amplitude modulation (PAM-2), four level PAM or PAM-4 and Duobinary (DB) are investigated to understand their limitations, advantages and disadvantages to be further used in next generation PON systems to increase its capacity and spectral efficiency.
- 30 October 2019
- Published by IntechOpen
Open AccessResearch of M-PAM and Duobinary Modulation Formats for Use in High-Speed WDM-PON Systems
The exponential growth of Internet data traffic and progress of Information and Communication Technology (ICT) sector pushes hard the telecommunication infrastructure for upgrading the transmission data rate. Wavelength division multiplexed passive optical networks (WDM-PONs) can be the next generation solution for nowadays problems which are related to transmission capacity. Next-generation WDM-PON systems based on mixed wavelength transmitters are expected to become more cost-efficient at high per user data rates, e.g., over 10 Gbit/s per channel. Important advantage of this technology is to set various channel spacing and use different modulation formats to increase spectral efficiency in the same time and provide different transmission speeds for end user, based on pay-as-you-grow approach. Therefore, several modulation formats like non-return to zero (NRZ) also called 2-level pulse-amplitude modulation (PAM-2), four level PAM or PAM-4 and Duobinary (DB) are investigated to understand their limitations, advantages and disadvantages to be further used in next generation PON systems to increase its capacity and spectral efficiency.
- 25 April 2017
- Published by Kaunas University of Technology (KTU) in Elektronika ir Elektrotechnika
- Vol. 23 (2)
Investigation of Influence of Mixed Configurations on Performance of WDM-PON
This paper aims at assessing of implementation of the concept of mixed systems in wavelength-division-multiplexing passive optical networks (WDM-PONs). At the first stage, the authors evaluate performance of two equal-channel transmission systems with non-return-to-zero (NRZ) and duobinary (DB) coding in terms of Q-factor, minimal channel spacing and supported data rate. At the second stage, two configurations of mixed transmission systems are proposed. The system with unequal channel spacing and multiple modulation formats (MMFs) as well as the system with mixed line rates (MLRs) and MMFs are investigated. The obtained results reveal that the impact of implementation of both systems is positive and concept of mixed transmission system can be considered as a potential solution for the increase of spectral efficiency (SE) of WDM-PON transmission system.DOI: http://dx.doi.org/10.5755/j01.eie.23.2.18003
- 25 April 2017
- Published by Kaunas University of Technology (KTU) in Elektronika ir Elektrotechnika
- Vol. 23 (2)
Investigation of Influence of Mixed Configurations on Performance of WDM-PON
This paper aims at assessing of implementation of the concept of mixed systems in wavelength-division-multiplexing passive optical networks (WDM-PONs). At the first stage, the authors evaluate performance of two equal-channel transmission systems with non-return-to-zero (NRZ) and duobinary (DB) coding in terms of Q-factor, minimal channel spacing and supported data rate. At the second stage, two configurations of mixed transmission systems are proposed. The system with unequal channel spacing and multiple modulation formats (MMFs) as well as the system with mixed line rates (MLRs) and MMFs are investigated. The obtained results reveal that the impact of implementation of both systems is positive and concept of mixed transmission system can be considered as a potential solution for the increase of spectral efficiency (SE) of WDM-PON transmission system.DOI: http://dx.doi.org/10.5755/j01.eie.23.2.18003
- 5 December 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Investigation on optimal transmission parameters for different modulation formats in 10 Gbit/s WDM-PON systems
The present paper proposes the optimal transmission parameters for non-return-to-zero (NRZ), return-to-zero differential phase shift keying (RZ-DPSK), carrier-suppressed RZ-DPSK (CSRZ-DPSK) and duobinary (DB) modulation formats in 16-channel 10 Gbit/s wavelength division multiplexed passive optical network (WDM-PON) transmission system. The paper investigates influence of laser output power, length of dispersion compensating fiber (DCF) and application of erbium-doped fiber amplifiers (EDFA), as well as impact of optical components configuration on received signal quality. It compares demand of these modulation formats for amplification and dispersion compensation with the increase of transmission distance, determining the optimal conditions for achieving maximal network reach for each of them. It is shown, that DB is the most resistant to chromatic dispersion (CD) and is able to achieve the longest transmission distance (100 km) without dispersion compensation. Whereas RZ-DPSK and CSRZ-DPSK modulation formats demonstrated maximal achievable reach (180 km) using DCF and EDFA.
- 5 December 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Investigation on optimal transmission parameters for different modulation formats in 10 Gbit/s WDM-PON systems
The present paper proposes the optimal transmission parameters for non-return-to-zero (NRZ), return-to-zero differential phase shift keying (RZ-DPSK), carrier-suppressed RZ-DPSK (CSRZ-DPSK) and duobinary (DB) modulation formats in 16-channel 10 Gbit/s wavelength division multiplexed passive optical network (WDM-PON) transmission system. The paper investigates influence of laser output power, length of dispersion compensating fiber (DCF) and application of erbium-doped fiber amplifiers (EDFA), as well as impact of optical components configuration on received signal quality. It compares demand of these modulation formats for amplification and dispersion compensation with the increase of transmission distance, determining the optimal conditions for achieving maximal network reach for each of them. It is shown, that DB is the most resistant to chromatic dispersion (CD) and is able to achieve the longest transmission distance (100 km) without dispersion compensation. Whereas RZ-DPSK and CSRZ-DPSK modulation formats demonstrated maximal achievable reach (180 km) using DCF and EDFA.
- 10 November 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 3783-3787
Comparison of modulation formats for use in the next generation passive optical networks
In this paper we are investigating the performance of different optical modulation formats in WDM-PON transmission system. On-off keying non-return-to-zero (NRZ-OOK), NRZ differential phase shift keying (NRZ DPSK), return-to-zero DPSK (RZ-DPSK, carrier-suppressed RZ DPSK (CSRZ-DPSK) and duobinary (DB) are reviewed.
- 10 November 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 3783-3787
Comparison of modulation formats for use in the next generation passive optical networks
In this paper we are investigating the performance of different optical modulation formats in WDM-PON transmission system. On-off keying non-return-to-zero (NRZ-OOK), NRZ differential phase shift keying (NRZ DPSK), return-to-zero DPSK (RZ-DPSK, carrier-suppressed RZ DPSK (CSRZ-DPSK) and duobinary (DB) are reviewed.
- 1 November 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 51-54
Performance comparison of modulation formats for 10 Gbit/s WDM-PON systems
The paper compares performance of different modulation formats for 16-channel wavelength-division-multiplexed passive optical network (WDM-PON) with transmission speed of 10 Gbit/s per channel. Non return to zero (NRZ), return to zero (RZ), carrier suppressed RZ (CSRZ), duobinary (DB), NRZ differential phase shift keying (NRZ DPSK), RZ-DPSK and CSRZ-DPSK formats are compared to evaluate their performance for the selected transmission network topology. Simulation results are obtained in the environment of OptSim software. It is shown that DB and CSRZ-DPSK formats yield the better performance achieving, respectively, maximal reach equal to 100 and 97 km.
- 1 November 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 51-54
Performance comparison of modulation formats for 10 Gbit/s WDM-PON systems
The paper compares performance of different modulation formats for 16-channel wavelength-division-multiplexed passive optical network (WDM-PON) with transmission speed of 10 Gbit/s per channel. Non return to zero (NRZ), return to zero (RZ), carrier suppressed RZ (CSRZ), duobinary (DB), NRZ differential phase shift keying (NRZ DPSK), RZ-DPSK and CSRZ-DPSK formats are compared to evaluate their performance for the selected transmission network topology. Simulation results are obtained in the environment of OptSim software. It is shown that DB and CSRZ-DPSK formats yield the better performance achieving, respectively, maximal reach equal to 100 and 97 km.