Ana Paula Jacobus
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Ana Paula Jacobus has a total of 76 co-authors. Here are the top co-authors by number of shared publications:
- Jeferson Gross
Institute for Research in Bioenergy, São Paulo State University, Rio Claro, Brazil
7 shared publications E. S. Loss
Departamento de Fisiologia, ICBS, UFRGS, Porto Alegre, RS, Brazil
4 shared publicationsG. F. Wassermann
4 shared publications- Caroline Varella Rodrigues
Universidade de São Paulo, Brasil
3 shared publications - Danieli Fernanda Canaver Marin
Institute for Research in Bioenergy (IPBEN), São Paulo State University (UNESP), Rio Claro 13500-230, Brazil
3 shared publications - Eloísa Silveira Loss
Laboratório de Endocrinologia Experimental e Eletrofisiologia, Departamento de Fisiologia, Instituto de Ciências Básicas da Saúde, Universidade Federal do Rio Grande do Sul, Brazil
3 shared publications
Latest Publications
- Open Access
EasyCAPS: A web tool for restriction-based genotyping and rational CRISPR-Cas9 donor design
Tracking Single Nucleotide Polymorphisms (SNPs) following CRISPR-Cas9 genome editing is a critical yet often labor-intensive step in modern genetic research. Although Sanger sequencing is the conventional method for definitive confirmation, it typically requires substantial time to generate results. In contrast, PCR-based restriction methods like CAPS (Cleaved Amplified Polymorphic Sequence) and dCAPS (derived CAPS) offer rapid and cost-effective alternatives. However, existing dCAPS primer design tools suffer from significant limitations and were largely developed for tracking polymorphisms in plant genomes. Concurrently, CRISPR-Cas9 gene editing requires strategies to prevent the re-cleavage of the edited allele, typically involving the modification of the Protospacer Adjacent Motif (PAM). To address these challenges, we developed EasyCAPS, a web-based tool that integrates dCAPS primer design with advanced functionalities for CRISPR experiments. EasyCAPS overcomes the shortcomings of previous software by enabling restriction enzyme pre-selection and optimizing designs for complex DNA sequences. Its key innovation is the "Hiding PAM" feature, which designs synonymous mutations to mask the Cas9 recognition site while accounting for codon usage bias, thereby facilitating one-step allelic exchange. The utility of the tool was demonstrated through practical applications targeting the HTA1, PHO84, and CAT5 genes, significantly accelerating both genotyping and gene editing processes. We conclude that EasyCAPS is an accessible solution that effectively streamlines molecular biology workflows.
Open AccessEasyCAPS: A web tool for restriction-based genotyping and rational CRISPR-Cas9 donor design
Tracking Single Nucleotide Polymorphisms (SNPs) following CRISPR-Cas9 genome editing is a critical yet often labor-intensive step in modern genetic research. Although Sanger sequencing is the conventional method for definitive confirmation, it typically requires substantial time to generate results. In contrast, PCR-based restriction methods like CAPS (Cleaved Amplified Polymorphic Sequence) and dCAPS (derived CAPS) offer rapid and cost-effective alternatives. However, existing dCAPS primer design tools suffer from significant limitations and were largely developed for tracking polymorphisms in plant genomes. Concurrently, CRISPR-Cas9 gene editing requires strategies to prevent the re-cleavage of the edited allele, typically involving the modification of the Protospacer Adjacent Motif (PAM). To address these challenges, we developed EasyCAPS, a web-based tool that integrates dCAPS primer design with advanced functionalities for CRISPR experiments. EasyCAPS overcomes the shortcomings of previous software by enabling restriction enzyme pre-selection and optimizing designs for complex DNA sequences. Its key innovation is the "Hiding PAM" feature, which designs synonymous mutations to mask the Cas9 recognition site while accounting for codon usage bias, thereby facilitating one-step allelic exchange. The utility of the tool was demonstrated through practical applications targeting the HTA1, PHO84, and CAT5 genes, significantly accelerating both genotyping and gene editing processes. We conclude that EasyCAPS is an accessible solution that effectively streamlines molecular biology workflows.
- Open Access
- 12 February 2026
- Published by Springer Nature in Biotechnology for Biofuels and Bioproducts
- Vol. 19 (1)
QTL mapping, breeding, and debugging Saccharomyces cerevisiae strains through Reiterated Mass Selection and backcrosSing (ReMaSSing)
Producing second-generation ethanol from lignocellulosic hydrolysates (LCHs) poses significant challenges for Saccharomyces cerevisiae due to the presence
- 12 February 2026
- Published by Springer Nature in Biotechnology for Biofuels and Bioproducts
- Vol. 19 (1)
Open AccessQTL mapping, breeding, and debugging Saccharomyces cerevisiae strains through Reiterated Mass Selection and backcrosSing (ReMaSSing)
Producing second-generation ethanol from lignocellulosic hydrolysates (LCHs) poses significant challenges for Saccharomyces cerevisiae due to the presence
- Open Access
QTL mapping, breeding, and debugging Saccharomyces cerevisiae strains through Reiterated Mass Selection and backcrosSing (ReMaSSing)
Background: Producing second-generation ethanol from lignocellulosic hydrolysates (LCHs) poses significant challenges for Saccharomyces cerevisiae due to the presence of fermentation inhibitors. Quantitative trait loci (QTL) mapping of stress-tolerant S. cerevisiae strains is important for identifying adaptive alleles that can enhance yeast fermentation of LCHs. However, the QTL mapping process is labor-intensive, requiring the screening of numerous recombinants and repeated crossings to improve mapping resolution. Results: We developed Reiterated Mass Selection and backcrosSing (ReMaSSing) to facilitate the identification of adaptive alleles through QTL mapping and to enhance LCH tolerance in yeast strains. ReMaSSing was applied to populations obtained by crossing the stress-resistant yeast PE-2_H4 with the laboratory strain S288C. Using alternative protocols, we selected haploid or diploid populations with dominant markers, enriching millions of segregants carrying adaptive alleles by propagating them in standard or LCH-supplemented media. The enriched pools were then bulk backcrossed with S288C, and germination of millions of spores generated new recombinant populations for subsequent selection cycles. After five rounds of ReMaSSing, whole-genome sequencing and QTL mapping identified key alleles associated with LCH tolerance, linked to VPS70 , CAT5 , GCY1 , UBP2 , MKT1 / SAL1 , HAP1 , and PHO84 , which influence growth and mitochondrial function in S288C. Mutations in IRA1 and HTA1 , unique to our S288C strain, were also mapped, highlighting ReMaSSing’s ability to detect and correct deleterious alleles (“bugs”). Allele swapping and competition assays confirmed that the identified QTL improved LCH tolerance and growth, with strains combining adaptive alleles performing over 20% better than the parental S288C. Finally, applying ReMaSSing to breed an LCH-tolerant yeast with a xylose-consuming strain produced recombinants with improved fermentation of xylose-enriched LCH. Conclusion: ReMaSSing offers a practical protocol for generating QTL mapping populations to identify adaptive alleles in tolerant strains and correct genetic defects in inferior ones. Notably, recombinant populations and clones derived from ReMaSSing outperformed both parental strains in LCH tolerance and growth. Furthermore, we applied ReMaSSing to breed strains with enhanced LCH tolerance, efficient xylose catabolism, and robust ethanol production. Together, these results demonstrate that ReMaSSing is a powerful tool for engineering industrial yeast strains that integrate desirable traits from multiple parental backgrounds.
Open AccessQTL mapping, breeding, and debugging Saccharomyces cerevisiae strains through Reiterated Mass Selection and backcrosSing (ReMaSSing)
Background: Producing second-generation ethanol from lignocellulosic hydrolysates (LCHs) poses significant challenges for Saccharomyces cerevisiae due to the presence of fermentation inhibitors. Quantitative trait loci (QTL) mapping of stress-tolerant S. cerevisiae strains is important for identifying adaptive alleles that can enhance yeast fermentation of LCHs. However, the QTL mapping process is labor-intensive, requiring the screening of numerous recombinants and repeated crossings to improve mapping resolution. Results: We developed Reiterated Mass Selection and backcrosSing (ReMaSSing) to facilitate the identification of adaptive alleles through QTL mapping and to enhance LCH tolerance in yeast strains. ReMaSSing was applied to populations obtained by crossing the stress-resistant yeast PE-2_H4 with the laboratory strain S288C. Using alternative protocols, we selected haploid or diploid populations with dominant markers, enriching millions of segregants carrying adaptive alleles by propagating them in standard or LCH-supplemented media. The enriched pools were then bulk backcrossed with S288C, and germination of millions of spores generated new recombinant populations for subsequent selection cycles. After five rounds of ReMaSSing, whole-genome sequencing and QTL mapping identified key alleles associated with LCH tolerance, linked to VPS70 , CAT5 , GCY1 , UBP2 , MKT1 / SAL1 , HAP1 , and PHO84 , which influence growth and mitochondrial function in S288C. Mutations in IRA1 and HTA1 , unique to our S288C strain, were also mapped, highlighting ReMaSSing’s ability to detect and correct deleterious alleles (“bugs”). Allele swapping and competition assays confirmed that the identified QTL improved LCH tolerance and growth, with strains combining adaptive alleles performing over 20% better than the parental S288C. Finally, applying ReMaSSing to breed an LCH-tolerant yeast with a xylose-consuming strain produced recombinants with improved fermentation of xylose-enriched LCH. Conclusion: ReMaSSing offers a practical protocol for generating QTL mapping populations to identify adaptive alleles in tolerant strains and correct genetic defects in inferior ones. Notably, recombinant populations and clones derived from ReMaSSing outperformed both parental strains in LCH tolerance and growth. Furthermore, we applied ReMaSSing to breed strains with enhanced LCH tolerance, efficient xylose catabolism, and robust ethanol production. Together, these results demonstrate that ReMaSSing is a powerful tool for engineering industrial yeast strains that integrate desirable traits from multiple parental backgrounds.
- Open Access
Engineering Adaptive Alleles for Escherichia coli Growth on Sucrose Using the EasyGuide CRISPR System
Adaptive Laboratory Evolution (ALE) is a powerful approach for mining genetic data to engineer industrial microorganisms. This evolution-informed design requires robust genetic tools to incorporate the discovered alleles into target strains. Here, we introduce the EasyGuide CRISPR, a five-plasmid platform that exploits E. coli ’s natural recombination system to assemble gRNA plasmids from overlapping PCR fragments. The production of gRNAs and donor DNA is further facilitated by using recombination cassettes generated through PCR with 40 to 60-mer oligos. With the new CRISPR toolkit, we constructed 22 gene edits in E. coli DH5α, most of which corresponded to alleles mapped in E. coli DH5α and E2348/69 ALE populations selected for sucrose propagation. For DH5α ALE, sucrose consumption was supported by the cscBKA operon expression from a high-copy plasmid. During ALE, plasmid integration into the chromosome, or its copy number reduction due to the pcnB deletion, conferred a 30–35% fitness gain, as demonstrated by CRISPR-engineered strains. A ∼5% advantage was also associated with a ∼40.4 kb deletion involving fli operons for flagella assembly. In E2348/69 ALE, inactivation of the hfl system suggested selection pressures for maintaining λ-prophage dormancy (lysogeny). We further enhanced our CRISPR toolkit using yeast for in vivo assembly of donors and expression cassettes, enabling the establishment of polyhydroxybutyrate synthesis from sucrose. Overall, our study highlights the importance of combining ALE with streamlined CRISPR-mediated allele editing to advance microbial production using cost-effective carbon sources.
Open AccessEngineering Adaptive Alleles for Escherichia coli Growth on Sucrose Using the EasyGuide CRISPR System
Adaptive Laboratory Evolution (ALE) is a powerful approach for mining genetic data to engineer industrial microorganisms. This evolution-informed design requires robust genetic tools to incorporate the discovered alleles into target strains. Here, we introduce the EasyGuide CRISPR, a five-plasmid platform that exploits E. coli ’s natural recombination system to assemble gRNA plasmids from overlapping PCR fragments. The production of gRNAs and donor DNA is further facilitated by using recombination cassettes generated through PCR with 40 to 60-mer oligos. With the new CRISPR toolkit, we constructed 22 gene edits in E. coli DH5α, most of which corresponded to alleles mapped in E. coli DH5α and E2348/69 ALE populations selected for sucrose propagation. For DH5α ALE, sucrose consumption was supported by the cscBKA operon expression from a high-copy plasmid. During ALE, plasmid integration into the chromosome, or its copy number reduction due to the pcnB deletion, conferred a 30–35% fitness gain, as demonstrated by CRISPR-engineered strains. A ∼5% advantage was also associated with a ∼40.4 kb deletion involving fli operons for flagella assembly. In E2348/69 ALE, inactivation of the hfl system suggested selection pressures for maintaining λ-prophage dormancy (lysogeny). We further enhanced our CRISPR toolkit using yeast for in vivo assembly of donors and expression cassettes, enabling the establishment of polyhydroxybutyrate synthesis from sucrose. Overall, our study highlights the importance of combining ALE with streamlined CRISPR-mediated allele editing to advance microbial production using cost-effective carbon sources.
- Open Access
Optimal trade-off between boosted tolerance and growth fitness during adaptive evolution of yeast to ethanol shocks
The design of selection protocols to obtain bioethanol yeasts with higher alcohol tolerance poses the challenge of improving industrial strains that are already robust to high ethanol levels. Furthermore, yeasts subjected to mutagenesis and selection, or laboratory evolution, often present adaptation trade-offs wherein higher stress tolerance is attained at the expense of growth and fermentation performance. We conducted an adaptive laboratory evolution by challenging four populations (P1–P4) of the Brazilian bioethanol yeast, Saccharomyces cerevisiae PE-2_H4, through 68–82 cycles of 2-h ethanol shocks (19%–30% v/v) and outgrowths. Colonies isolated from the final populations (P1c–P4c) were subjected to whole-genome sequencing, revealing mutations in genes enriched for the cAMP/PKA and trehalose degradation pathways. Fitness analyses of the isolated clones P1c–P3c and reverse-engineered strains demonstrated that mutations were primarily selected for cell viability under ethanol stress, at the cost of decreased growth rates in cultures with or without ethanol. Under this selection regime for stress survival, the population P4 evolved a protective snowflake phenotype resulting from BUD3 disruption. Despite marked adaptation trade-offs, the combination of reverse-engineered mutations cyr1 A1474T / usv1Δ conferred 5.46% higher fitness than the parental PE-2_H4 for propagation in 8% (v/v) ethanol, with only a 1.07% fitness cost in a culture medium without alcohol. The cyr1 A1474T / usv1Δ strain and evolved P1c displayed robust fermentations of sugarcane molasses using cell recycling and sulfuric acid treatments, mimicking Brazilian bioethanol production. These results demonstrate that some alleles selected for acute stress survival may further confer stress tolerance and optimal performance under industrial conditions.
Open AccessOptimal trade-off between boosted tolerance and growth fitness during adaptive evolution of yeast to ethanol shocks
The design of selection protocols to obtain bioethanol yeasts with higher alcohol tolerance poses the challenge of improving industrial strains that are already robust to high ethanol levels. Furthermore, yeasts subjected to mutagenesis and selection, or laboratory evolution, often present adaptation trade-offs wherein higher stress tolerance is attained at the expense of growth and fermentation performance. We conducted an adaptive laboratory evolution by challenging four populations (P1–P4) of the Brazilian bioethanol yeast, Saccharomyces cerevisiae PE-2_H4, through 68–82 cycles of 2-h ethanol shocks (19%–30% v/v) and outgrowths. Colonies isolated from the final populations (P1c–P4c) were subjected to whole-genome sequencing, revealing mutations in genes enriched for the cAMP/PKA and trehalose degradation pathways. Fitness analyses of the isolated clones P1c–P3c and reverse-engineered strains demonstrated that mutations were primarily selected for cell viability under ethanol stress, at the cost of decreased growth rates in cultures with or without ethanol. Under this selection regime for stress survival, the population P4 evolved a protective snowflake phenotype resulting from BUD3 disruption. Despite marked adaptation trade-offs, the combination of reverse-engineered mutations cyr1 A1474T / usv1Δ conferred 5.46% higher fitness than the parental PE-2_H4 for propagation in 8% (v/v) ethanol, with only a 1.07% fitness cost in a culture medium without alcohol. The cyr1 A1474T / usv1Δ strain and evolved P1c displayed robust fermentations of sugarcane molasses using cell recycling and sulfuric acid treatments, mimicking Brazilian bioethanol production. These results demonstrate that some alleles selected for acute stress survival may further confer stress tolerance and optimal performance under industrial conditions.
- 13 September 2023
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 49, 398-412
Performance of clostridium species and autochthonous bacteria from citrus wastewater under different carbon sources to produce biofuels
- 13 September 2023
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 49, 398-412
Performance of clostridium species and autochthonous bacteria from citrus wastewater under different carbon sources to produce biofuels
- Open Access
EasyGuide plasmids support in vivo assembly of gRNAs for CRISPR/Cas9 applications in Saccharomyces cerevisiae
Most CRISPR/Cas9 applications in yeast rely on a plasmid-based expression of Cas9 and its guide RNA (gRNA) containing a 20-nucleotides (nts) spacer tailored to each genomic target. The lengthy assembly of this customized gRNA requires at least 3–5 days for its pre-cloning in Escherichia coli , purification, validation, and co-transformation with Cas9 into a yeast strain. Here, we constructed a series of 12 EasyGuide plasmids to simplify CRISPR/Cas9 applications in Saccharomyces cerevisiae . The new vectors provide templates for generating PCR fragments that can assemble up to six functional gRNAs directly into yeasts via homologous recombination between the 20-nts spacers. By dispensing pre-cloning in E. coli , yeast in vivo gRNA assembly significantly reduces the CRISPR/Cas9 experimental workload. A highly efficient yeast genome editing procedure, involving PCR amplification of gRNAs and donors, followed by their transformation into a Cas9-expressing strain, can be easily accomplished in a single day.
Open AccessEasyGuide plasmids support in vivo assembly of gRNAs for CRISPR/Cas9 applications in Saccharomyces cerevisiae
Most CRISPR/Cas9 applications in yeast rely on a plasmid-based expression of Cas9 and its guide RNA (gRNA) containing a 20-nucleotides (nts) spacer tailored to each genomic target. The lengthy assembly of this customized gRNA requires at least 3–5 days for its pre-cloning in Escherichia coli , purification, validation, and co-transformation with Cas9 into a yeast strain. Here, we constructed a series of 12 EasyGuide plasmids to simplify CRISPR/Cas9 applications in Saccharomyces cerevisiae . The new vectors provide templates for generating PCR fragments that can assemble up to six functional gRNAs directly into yeasts via homologous recombination between the 20-nts spacers. By dispensing pre-cloning in E. coli , yeast in vivo gRNA assembly significantly reduces the CRISPR/Cas9 experimental workload. A highly efficient yeast genome editing procedure, involving PCR amplification of gRNAs and donors, followed by their transformation into a Cas9-expressing strain, can be easily accomplished in a single day.
- 1 April 2022
- Published by Springer Nature in Current Genetics
- Vol. 68 (3-4) , 319-342
How adaptive laboratory evolution can boost yeast tolerance to lignocellulosic hydrolyses
The yeast Saccharomyces cerevisiae is an excellent candidate for establishing cell factories to convert lignocellulosic biomass into chemicals and fuels. To enable this technology, yeast robustness must be improved to withstand the fermentation inhibitors (e.g., weak organic acids, phenols, and furan aldehydes) resulting from biomass pretreatment and hydrolysis. Here, we discuss how evolution experiments performed in the lab, a method commonly known as adaptive laboratory evolution (ALE), may contribute to lifting yeast tolerance against the inhibitors of lignocellulosic hydrolysates (LCHs). The key is that, through the combination of whole-genome sequencing and reverse engineering, ALE provides a robust platform for discovering and testing adaptive alleles, allowing to explore the genetic underpinnings of yeast responses to LCHs. We review the insights gained from past evolution experiments with S. cerevisiae in LCH inhibitors and propose experimental designs to optimise the discovery of genetic variants adaptive to biomass toxicity. The knowledge gathered through ALE projects is envisaged as a roadmap to engineer superior yeast strains for biomass-based bioprocesses.
- 1 April 2022
- Published by Springer Nature in Current Genetics
- Vol. 68 (3-4) , 319-342
How adaptive laboratory evolution can boost yeast tolerance to lignocellulosic hydrolyses
The yeast Saccharomyces cerevisiae is an excellent candidate for establishing cell factories to convert lignocellulosic biomass into chemicals and fuels. To enable this technology, yeast robustness must be improved to withstand the fermentation inhibitors (e.g., weak organic acids, phenols, and furan aldehydes) resulting from biomass pretreatment and hydrolysis. Here, we discuss how evolution experiments performed in the lab, a method commonly known as adaptive laboratory evolution (ALE), may contribute to lifting yeast tolerance against the inhibitors of lignocellulosic hydrolysates (LCHs). The key is that, through the combination of whole-genome sequencing and reverse engineering, ALE provides a robust platform for discovering and testing adaptive alleles, allowing to explore the genetic underpinnings of yeast responses to LCHs. We review the insights gained from past evolution experiments with S. cerevisiae in LCH inhibitors and propose experimental designs to optimise the discovery of genetic variants adaptive to biomass toxicity. The knowledge gathered through ALE projects is envisaged as a roadmap to engineer superior yeast strains for biomass-based bioprocesses.
- Open Access
- 1 January 2022
- Published by Elsevier in SSRN Electronic Journal
Hydrogen and Ethanol Production from Citrus Wastewater into Value-Added Products: Performance of Clostridium Species and a Microbial Consortium
Anaerobic digestion is a promising alternative of citrus residue valorization for the generation of renewable energy and pollution control. In this sense, this study evaluated the anaerobic digestion of citrus wastewater, aiming the biological production of H2 and ethanol from three inocula: (1) Clostridium acetobutylicum ATCC 824, (2) Clostridium beijerinckii ATCC 10132 and (3) a citrus anaerobic consortium enriched from citrus wastewater. The H2 and ethanol production from glucose-fed reactors were (mmol H2 L1; mg ethanol L-1) with the inocula: 1 (36.8; 22.9); 2 (64.1; 18.0); and; 3 (0.0; 1571.8) respectively. In anaerobic batch reactors fed with citrus wastewater were verified H2 (mmol L-1) 21.2; 15.7; 37.6 and ethanol (mg L-1) 15.0; 26.8 and 82.8 with inocula 1, 2 and 3, respectively. Relative abundances of fermentative bacteria belonging to the genera of Bacillus and Clostridium, which are known as H2 and ethanol producers, were observed in inoculum 3. These results highlight the possibility of transforming the organic matter and endogenous microorganisms from citrus wastewater industry into value-added products along with contributing to environment-sustainable solution.
- 1 January 2022
- Published by Elsevier in SSRN Electronic Journal
Open AccessHydrogen and Ethanol Production from Citrus Wastewater into Value-Added Products: Performance of Clostridium Species and a Microbial Consortium
Anaerobic digestion is a promising alternative of citrus residue valorization for the generation of renewable energy and pollution control. In this sense, this study evaluated the anaerobic digestion of citrus wastewater, aiming the biological production of H2 and ethanol from three inocula: (1) Clostridium acetobutylicum ATCC 824, (2) Clostridium beijerinckii ATCC 10132 and (3) a citrus anaerobic consortium enriched from citrus wastewater. The H2 and ethanol production from glucose-fed reactors were (mmol H2 L1; mg ethanol L-1) with the inocula: 1 (36.8; 22.9); 2 (64.1; 18.0); and; 3 (0.0; 1571.8) respectively. In anaerobic batch reactors fed with citrus wastewater were verified H2 (mmol L-1) 21.2; 15.7; 37.6 and ethanol (mg L-1) 15.0; 26.8 and 82.8 with inocula 1, 2 and 3, respectively. Relative abundances of fermentative bacteria belonging to the genera of Bacillus and Clostridium, which are known as H2 and ethanol producers, were observed in inoculum 3. These results highlight the possibility of transforming the organic matter and endogenous microorganisms from citrus wastewater industry into value-added products along with contributing to environment-sustainable solution.
- 1 January 2022
- Published by Elsevier in Chemosphere
- Vol. 287 (Pt 3) , 132290
Production and assessment of the biodegradation and ecotoxicity of xylan- and starch-based bioplastics
- 1 January 2022
- Published by Elsevier in Chemosphere
- Vol. 287 (Pt 3) , 132290
Production and assessment of the biodegradation and ecotoxicity of xylan- and starch-based bioplastics