Chiara Pallara
Research Subjects
Chiara Pallara has a total of 236 co-authors. Here are the top co-authors by number of shared publications:
- Juan Fernández-Recio
Instituto de Ciencias de la Vid y del Vino (ICVV), CSIC - Gobierno de la Rioja - Universidad de La Rioja, Logroño 26007, Spain
12 shared publications - Brian Jiménez-García
Zymvol Biomodeling
5 shared publications - Miguel Romero-Durana
Barcelona Supercomputing Center (BSC), Barcelona, Spain
5 shared publications - Iain H. Moal
Joint BSC-IRB Research Program in Computational Biology, Life Science Department, Barcelona Supercomputing Center, Barcelona, Spain
4 shared publications - Alexandre M. J. J. Bonvin
Utrecht University Padualaan 8
3 shared publications - Brian G. Pierce
Department of Cell Biology and Molecular Genetics, University of Maryland, College Park, MD 20742, USA
3 shared publications
Latest Publications
- Open Access
Characterization of PROTACs by Ternary Complex Landscape Exploration using Monte Carlo simulations
PROTACs (Proteolysis-Targeting Chimeras) have emerged as a powerful modality for targeted protein degradation, yet their optimization still relies heavily on trial-and-error methods. A key factor in PROTAC degradation efficiency is the formation of the ternary complex (TC) between the PROTAC and its target proteins. However, due to their dynamic nature, PROTAC-mediated TCs can adopt multiple conformations, making their characterization challenging. Computational methods that account for this flexibility can provide more accurate predictions aligned with experimental results. Here, we explore the dynamic nature of TCs by analyzing their energy landscapes using protein-protein docking coupled with Monte Carlo sampling. This approach enables the identification of energetically relevant TC conformations, including those observed in experimental crystal structures, and allows estimation of thermodynamic and kinetic stability, as shown for a set of VHL-WDR5 PROTACs. Insights from these landscapes could support the screening and optimization of tens of similar PROTACs based on TC stability.
Open AccessCharacterization of PROTACs by Ternary Complex Landscape Exploration using Monte Carlo simulations
PROTACs (Proteolysis-Targeting Chimeras) have emerged as a powerful modality for targeted protein degradation, yet their optimization still relies heavily on trial-and-error methods. A key factor in PROTAC degradation efficiency is the formation of the ternary complex (TC) between the PROTAC and its target proteins. However, due to their dynamic nature, PROTAC-mediated TCs can adopt multiple conformations, making their characterization challenging. Computational methods that account for this flexibility can provide more accurate predictions aligned with experimental results. Here, we explore the dynamic nature of TCs by analyzing their energy landscapes using protein-protein docking coupled with Monte Carlo sampling. This approach enables the identification of energetically relevant TC conformations, including those observed in experimental crystal structures, and allows estimation of thermodynamic and kinetic stability, as shown for a set of VHL-WDR5 PROTACs. Insights from these landscapes could support the screening and optimization of tens of similar PROTACs based on TC stability.
- Open Access
Efficient Design of Affilin ® Protein Binders for HER3
Engineered scaffold-based proteins that bind to concrete targets with high affinity offer significant advantages over traditional antibodies in theranostic applications. Their development often relies on display methods, where large libraries of variants are physically contacted with the desired target protein and pools of binding variants can be selected. Herein, we use a combined artificial intelligence/physics-based computational framework and phage display approach to obtain ubiquitin based Affilin ® proteins targeting the HER3 extracellular domain, a relevant tumor target. We demonstrate that the developed in silico pipeline can generate de novo Affilin ® proteins with a high experimental success rate using a small training set of sequences (<1000). The classical phage display yielded primary candidates with low nanomolar affinities. These binders could be further optimized by phage display and computational maturation alike. These combined efforts resulted in four HER3 ligands with high affinity, cell binding, and serum stability with theranostic potential.
Open AccessEfficient Design of Affilin ® Protein Binders for HER3
Engineered scaffold-based proteins that bind to concrete targets with high affinity offer significant advantages over traditional antibodies in theranostic applications. Their development often relies on display methods, where large libraries of variants are physically contacted with the desired target protein and pools of binding variants can be selected. Herein, we use a combined artificial intelligence/physics-based computational framework and phage display approach to obtain ubiquitin based Affilin ® proteins targeting the HER3 extracellular domain, a relevant tumor target. We demonstrate that the developed in silico pipeline can generate de novo Affilin ® proteins with a high experimental success rate using a small training set of sequences (<1000). The classical phage display yielded primary candidates with low nanomolar affinities. These binders could be further optimized by phage display and computational maturation alike. These combined efforts resulted in four HER3 ligands with high affinity, cell binding, and serum stability with theranostic potential.
- 1 July 2019
- Published by Elsevier in Biochimica et Biophysica Acta (BBA) - Biomembranes
- Vol. 1861 (7) , 1302-1316
Molecular basis for the protective effects of low-density lipoprotein receptor-related protein 1 (LRP1)-derived peptides against LDL aggregation
- 1 July 2019
- Published by Elsevier in Biochimica et Biophysica Acta (BBA) - Biomembranes
- Vol. 1861 (7) , 1302-1316
Molecular basis for the protective effects of low-density lipoprotein receptor-related protein 1 (LRP1)-derived peptides against LDL aggregation
- Open Access
- 7 August 2018
- Published by Springer Nature in Scientific Reports
- Vol. 8 (1) , 1-16
Intrinsically active MEK variants are differentially regulated by proteinases and phosphatases
MAPK/ERK kinase (MEK) 1/2 are central signaling proteins that serve as specificity determinants of the MAPK/ERK cascade. More than twenty activating mutations have been reported for MEK1/2, and many of them are known to cause diseases such as cancers, arteriovenous malformation and RASopathies. Changes in their intrinsic activity do not seem to correlate with the severity of the diseases. Here we studied four MEK1/2 mutations using biochemical and molecular dynamic methods. Although the studied mutants elevated the activating phosphorylation of MEK they had no effect on the stimulated ERK1/2 phosphorylation. Studying the regulatory mechanism that may explain this lack of effect, we found that one type of mutation affects MEK stability and two types of mutations demonstrate a reduced sensitivity to PP2A. Together, our results indicate that some MEK mutations exert their function not only by their elevated intrinsic activity, but also by modulation of regulatory elements such as protein stability or dephosphorylation.
- 7 August 2018
- Published by Springer Nature in Scientific Reports
- Vol. 8 (1) , 1-16
Open AccessIntrinsically active MEK variants are differentially regulated by proteinases and phosphatases
MAPK/ERK kinase (MEK) 1/2 are central signaling proteins that serve as specificity determinants of the MAPK/ERK cascade. More than twenty activating mutations have been reported for MEK1/2, and many of them are known to cause diseases such as cancers, arteriovenous malformation and RASopathies. Changes in their intrinsic activity do not seem to correlate with the severity of the diseases. Here we studied four MEK1/2 mutations using biochemical and molecular dynamic methods. Although the studied mutants elevated the activating phosphorylation of MEK they had no effect on the stimulated ERK1/2 phosphorylation. Studying the regulatory mechanism that may explain this lack of effect, we found that one type of mutation affects MEK stability and two types of mutations demonstrate a reduced sensitivity to PP2A. Together, our results indicate that some MEK mutations exert their function not only by their elevated intrinsic activity, but also by modulation of regulatory elements such as protein stability or dephosphorylation.
- 1 January 2018
- Published by Elsevier
- Vol. 110, 203-249
Structural Prediction of Protein–Protein Interactions by Docking: Application to Biomedical Problems
- 1 January 2018
- Published by Elsevier
- Vol. 110, 203-249
Structural Prediction of Protein–Protein Interactions by Docking: Application to Biomedical Problems
- 3 December 2016
- Published by Springer Nature
- Vol. 1529, 139-159
Modeling Binding Affinity of Pathological Mutations for Computational Protein Design
An important aspect of protein functionality is the formation of specific complexes with other proteins, which are involved in the majority of biological processes. The functional characterization of such interactions at molecular level is necessary, not only to understand biological and pathological phenomena but also to design improved, or even new interfaces, or to develop new therapeutic approaches. X-ray crystallography and NMR spectroscopy have increased the number of 3D protein complex structures deposited in the Protein Data Bank (PDB). However, one of the more challenging objectives in biological research is to functionally characterize protein interactions and thus identify residues that significantly contribute to the binding. Considering that the experimental characterization of protein interfaces remains expensive, time-consuming, and labor-intensive, computational approaches represent a significant breakthrough in proteomics, assisting or even replacing experimental efforts. Thanks to the technological advances in computing and data processing, these techniques now cover a vast range of protocols, from the estimation of the evolutionary conservation of amino acid positions in a protein, to the energetic contribution of each residue to the binding affinity. In this chapter, we review several existing computational protocols to model the phylogenetic, structural, and energetic properties of residues within protein–protein interfaces.
- 3 December 2016
- Published by Springer Nature
- Vol. 1529, 139-159
Modeling Binding Affinity of Pathological Mutations for Computational Protein Design
An important aspect of protein functionality is the formation of specific complexes with other proteins, which are involved in the majority of biological processes. The functional characterization of such interactions at molecular level is necessary, not only to understand biological and pathological phenomena but also to design improved, or even new interfaces, or to develop new therapeutic approaches. X-ray crystallography and NMR spectroscopy have increased the number of 3D protein complex structures deposited in the Protein Data Bank (PDB). However, one of the more challenging objectives in biological research is to functionally characterize protein interactions and thus identify residues that significantly contribute to the binding. Considering that the experimental characterization of protein interfaces remains expensive, time-consuming, and labor-intensive, computational approaches represent a significant breakthrough in proteomics, assisting or even replacing experimental efforts. Thanks to the technological advances in computing and data processing, these techniques now cover a vast range of protocols, from the estimation of the evolutionary conservation of amino acid positions in a protein, to the energetic contribution of each residue to the binding affinity. In this chapter, we review several existing computational protocols to model the phylogenetic, structural, and energetic properties of residues within protein–protein interfaces.
- 25 October 2016
- Published by Wiley in Proteins: Structure, Function, and Bioinformatics
- Vol. 85 (3) , 487-496
pyDock scoring for the new modeling challenges in docking: Protein–peptide, homo‐multimers, and domain–domain interactions
The sixth CAPRI edition included new modeling challenges, such as the prediction of protein–peptide complexes, and the modeling of homo‐oligomers and domain–domain interactions as part of the first joint CASP–CAPRI experiment. Other non‐standard targets included the prediction of interfacial water positions and the modeling of the interactions between proteins and nucleic acids. We have participated in all proposed targets of this CAPRI edition both as predictors and as scorers, with new protocols to efficiently use our docking and scoring scheme pyDock in a large variety of scenarios. In addition, we have participated for the first time in the servers section, with our recently developed webserver, pyDockWeb. Excluding the CASP–CAPRI cases, we submitted acceptable models (or better) for 7 out of the 18 evaluated targets as predictors, 4 out of the 11 targets as scorers, and 6 out of the 18 targets as servers. The overall success rates were below those in past CAPRI editions. This shows the challenging nature of this last edition, with many difficult targets for which no participant submitted a single acceptable model. Interestingly, we submitted acceptable models for 83% of the evaluated protein–peptide targets. As for the 25 cases of the CASP–CAPRI experiment, in which we used a larger variety of modeling techniques (template‐based, symmetry restraints, literature information, etc.), we submitted acceptable models for 56% of the targets. In summary, this CAPRI edition showed that pyDock scheme can be efficiently adapted to the increasing variety of problems that the protein interactions field is currently facing. Proteins 2017; 85:487–496.
- 25 October 2016
- Published by Wiley in Proteins: Structure, Function, and Bioinformatics
- Vol. 85 (3) , 487-496
pyDock scoring for the new modeling challenges in docking: Protein–peptide, homo‐multimers, and domain–domain interactions
The sixth CAPRI edition included new modeling challenges, such as the prediction of protein–peptide complexes, and the modeling of homo‐oligomers and domain–domain interactions as part of the first joint CASP–CAPRI experiment. Other non‐standard targets included the prediction of interfacial water positions and the modeling of the interactions between proteins and nucleic acids. We have participated in all proposed targets of this CAPRI edition both as predictors and as scorers, with new protocols to efficiently use our docking and scoring scheme pyDock in a large variety of scenarios. In addition, we have participated for the first time in the servers section, with our recently developed webserver, pyDockWeb. Excluding the CASP–CAPRI cases, we submitted acceptable models (or better) for 7 out of the 18 evaluated targets as predictors, 4 out of the 11 targets as scorers, and 6 out of the 18 targets as servers. The overall success rates were below those in past CAPRI editions. This shows the challenging nature of this last edition, with many difficult targets for which no participant submitted a single acceptable model. Interestingly, we submitted acceptable models for 83% of the evaluated protein–peptide targets. As for the 25 cases of the CASP–CAPRI experiment, in which we used a larger variety of modeling techniques (template‐based, symmetry restraints, literature information, etc.), we submitted acceptable models for 56% of the targets. In summary, this CAPRI edition showed that pyDock scheme can be efficiently adapted to the increasing variety of problems that the protein interactions field is currently facing. Proteins 2017; 85:487–496.
- 28 June 2016
- Published by American Chemical Society (ACS) in Journal of Chemical Theory and Computation
- Vol. 12 (7) , 3236-3249
Conformational Heterogeneity of Unbound Proteins Enhances Recognition in Protein–Protein Encounters
To understand cellular processes at the molecular level we need to improve our knowledge of protein–protein interactions, from a structural, mechanistic, and energetic point of view. Current theoretical studies and computational docking simulations show that protein dynamics plays a key role in protein association and support the need for including protein flexibility in modeling protein interactions. Assuming the conformational selection binding mechanism, in which the unbound state can sample bound conformers, one possible strategy to include flexibility in docking predictions would be the use of conformational ensembles originated from unbound protein structures. Here we present an exhaustive computational study about the use of precomputed unbound ensembles in the context of protein docking, performed on a set of 124 cases of the Protein–Protein Docking Benchmark 3.0. Conformational ensembles were generated by conformational optimization and refinement with MODELLER and by short molecular dynamics trajectories with AMBER. We identified those conformers providing optimal binding and investigated the role of protein conformational heterogeneity in protein–protein recognition. Our results show that a restricted conformational refinement can generate conformers with better binding properties and improve docking encounters in medium-flexible cases. For more flexible cases, a more extended conformational sampling based on Normal Mode Analysis was proven helpful. We found that successful conformers provide better energetic complementarity to the docking partners, which is compatible with recent views of binding association. In addition to the mechanistic considerations, these findings could be exploited for practical docking predictions of improved efficiency.
- 28 June 2016
- Published by American Chemical Society (ACS) in Journal of Chemical Theory and Computation
- Vol. 12 (7) , 3236-3249
Conformational Heterogeneity of Unbound Proteins Enhances Recognition in Protein–Protein Encounters
To understand cellular processes at the molecular level we need to improve our knowledge of protein–protein interactions, from a structural, mechanistic, and energetic point of view. Current theoretical studies and computational docking simulations show that protein dynamics plays a key role in protein association and support the need for including protein flexibility in modeling protein interactions. Assuming the conformational selection binding mechanism, in which the unbound state can sample bound conformers, one possible strategy to include flexibility in docking predictions would be the use of conformational ensembles originated from unbound protein structures. Here we present an exhaustive computational study about the use of precomputed unbound ensembles in the context of protein docking, performed on a set of 124 cases of the Protein–Protein Docking Benchmark 3.0. Conformational ensembles were generated by conformational optimization and refinement with MODELLER and by short molecular dynamics trajectories with AMBER. We identified those conformers providing optimal binding and investigated the role of protein conformational heterogeneity in protein–protein recognition. Our results show that a restricted conformational refinement can generate conformers with better binding properties and improve docking encounters in medium-flexible cases. For more flexible cases, a more extended conformational sampling based on Normal Mode Analysis was proven helpful. We found that successful conformers provide better energetic complementarity to the docking partners, which is compatible with recent views of binding association. In addition to the mechanistic considerations, these findings could be exploited for practical docking predictions of improved efficiency.
- Open Access
- 28 April 2016
- Published by Wiley in Proteins: Structure, Function, and Bioinformatics
- Vol. 84 (S1) , 323-348
Prediction of homoprotein and heteroprotein complexes by protein docking and template‐based modeling: A CASP‐CAPRI experiment
We present the results for CAPRI Round 30, the first joint CASP‐CAPRI experiment, which brought together experts from the protein structure prediction and protein–protein docking communities. The Round comprised 25 targets from amongst those submitted for the CASP11 prediction experiment of 2014. The targets included mostly homodimers, a few homotetramers, and two heterodimers, and comprised protein chains that could readily be modeled using templates from the Protein Data Bank. On average 24 CAPRI groups and 7 CASP groups submitted docking predictions for each target, and 12 CAPRI groups per target participated in the CAPRI scoring experiment. In total more than 9500 models were assessed against the 3D structures of the corresponding target complexes. Results show that the prediction of homodimer assemblies by homology modeling techniques and docking calculations is quite successful for targets featuring large enough subunit interfaces to represent stable associations. Targets with ambiguous or inaccurate oligomeric state assignments, often featuring crystal contact‐sized interfaces, represented a confounding factor. For those, a much poorer prediction performance was achieved, while nonetheless often providing helpful clues on the correct oligomeric state of the protein. The prediction performance was very poor for genuine tetrameric targets, where the inaccuracy of the homology‐built subunit models and the smaller pair‐wise interfaces severely limited the ability to derive the correct assembly mode. Our analysis also shows that docking procedures tend to perform better than standard homology modeling techniques and that highly accurate models of the protein components are not always required to identify their association modes with acceptable accuracy. Proteins 2016; 84(Suppl 1):323–348. © 2016 The Authors Proteins: Structure, Function, and Bioinformatics Published by Wiley Periodicals, Inc.
- 28 April 2016
- Published by Wiley in Proteins: Structure, Function, and Bioinformatics
- Vol. 84 (S1) , 323-348
Open AccessPrediction of homoprotein and heteroprotein complexes by protein docking and template‐based modeling: A CASP‐CAPRI experiment
We present the results for CAPRI Round 30, the first joint CASP‐CAPRI experiment, which brought together experts from the protein structure prediction and protein–protein docking communities. The Round comprised 25 targets from amongst those submitted for the CASP11 prediction experiment of 2014. The targets included mostly homodimers, a few homotetramers, and two heterodimers, and comprised protein chains that could readily be modeled using templates from the Protein Data Bank. On average 24 CAPRI groups and 7 CASP groups submitted docking predictions for each target, and 12 CAPRI groups per target participated in the CAPRI scoring experiment. In total more than 9500 models were assessed against the 3D structures of the corresponding target complexes. Results show that the prediction of homodimer assemblies by homology modeling techniques and docking calculations is quite successful for targets featuring large enough subunit interfaces to represent stable associations. Targets with ambiguous or inaccurate oligomeric state assignments, often featuring crystal contact‐sized interfaces, represented a confounding factor. For those, a much poorer prediction performance was achieved, while nonetheless often providing helpful clues on the correct oligomeric state of the protein. The prediction performance was very poor for genuine tetrameric targets, where the inaccuracy of the homology‐built subunit models and the smaller pair‐wise interfaces severely limited the ability to derive the correct assembly mode. Our analysis also shows that docking procedures tend to perform better than standard homology modeling techniques and that highly accurate models of the protein components are not always required to identify their association modes with acceptable accuracy. Proteins 2016; 84(Suppl 1):323–348. © 2016 The Authors Proteins: Structure, Function, and Bioinformatics Published by Wiley Periodicals, Inc.
- 1 December 2015
- Published by Elsevier in Biochimica et Biophysica Acta (BBA) - Bioenergetics
- Vol. 1847 (12) , 1549-1559
Interaction of photosystem I from Phaeodactylum tricornutum with plastocyanins as compared with its native cytochrome c6: Reunion with a lost donor
- 1 December 2015
- Published by Elsevier in Biochimica et Biophysica Acta (BBA) - Bioenergetics
- Vol. 1847 (12) , 1549-1559
Interaction of photosystem I from Phaeodactylum tricornutum with plastocyanins as compared with its native cytochrome c6: Reunion with a lost donor