Martín Gómez-Cárdenas
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Martín Gómez-Cárdenas has a total of 61 co-authors. Here are the top co-authors by number of shared publications:
- Benedicto Vargas-Larreta
Instituto Tecnológico El Salto
4 shared publications - Jonathan Hernández-Ramos
Instituto Nacional de Investigaciones Forestales, Agrícolas y Pecuarias
4 shared publications - Juan Carlos Guzmán-Santiago
Universidad Autonóma de Nuevo León
4 shared publications - Mario Valerio Velasco-García
Centro Nacional de Investigación Disciplinaria en Conservación y Mejoramiento de Ecosistemas Forestales (Cenid Comef), Instituto Nacional de Investigaciones Forestales, Agrícolas y Pecuarias (INIFAP), Coyoacán 04010, Mexico
4 shared publications - Hipólito Jesús Muñoz Flores
Instituto Nacional de Investigaciones Forestales, Agrícolas y Pecuarias (INIFAP)
3 shared publications - Héctor Manuel De Los Santos-Posadas
Colegio de Postgraduados
3 shared publications
Latest Publications
- Open Access
- 17 September 2026
- Published by MDPI AG in Conservation
- Vol. 6 (3) , 116
Variation and Genetic Control of Seed Germination in Pinus oocarpa Trees with Different Levels of Resin Production: Implications for Conservation
Pinus oocarpa is ecologically and economically important because of its resin production; however, the effects of variation in resin production on its reproductive performance remain poorly understood. This study aimed to evaluate the variation and genetic control of seed germination in high-resin-producing, low-resin-producing, and non-resin-tapped trees. Seeds from the three tree groups were collected, germinated, and counted daily to evaluate eight germination indices. The variation, heritability, and genetic correlations of the germination traits were estimated separately for each tree group. Four of the eight germination indices were significantly lower in trees with high resin production, demonstrating the negative effect of resin production on seed germination. The distribution of variation, genetic coefficients of variation (7.68 to 68.21%), heritability estimates (0.63 to 0.75), and phenotypic correlations (−0.09 to −0.76; 0.13 to 0.94) were similar among the tree groups; however, genetic correlations (−0.12 to −0.99; 0.20 to 0.99) were stronger in high-resin-producing trees. The lower germination capacity and germination rate observed in high resin-producing trees may compromise natural regeneration. Therefore, conservation strategies should prioritize reforestation using seeds from high resin-producing trees that also exhibit high germination capacity, thereby helping maintain forest persistence and productivity.
- 17 September 2026
- Published by MDPI AG in Conservation
- Vol. 6 (3) , 116
Open AccessVariation and Genetic Control of Seed Germination in Pinus oocarpa Trees with Different Levels of Resin Production: Implications for Conservation
Pinus oocarpa is ecologically and economically important because of its resin production; however, the effects of variation in resin production on its reproductive performance remain poorly understood. This study aimed to evaluate the variation and genetic control of seed germination in high-resin-producing, low-resin-producing, and non-resin-tapped trees. Seeds from the three tree groups were collected, germinated, and counted daily to evaluate eight germination indices. The variation, heritability, and genetic correlations of the germination traits were estimated separately for each tree group. Four of the eight germination indices were significantly lower in trees with high resin production, demonstrating the negative effect of resin production on seed germination. The distribution of variation, genetic coefficients of variation (7.68 to 68.21%), heritability estimates (0.63 to 0.75), and phenotypic correlations (−0.09 to −0.76; 0.13 to 0.94) were similar among the tree groups; however, genetic correlations (−0.12 to −0.99; 0.20 to 0.99) were stronger in high-resin-producing trees. The lower germination capacity and germination rate observed in high resin-producing trees may compromise natural regeneration. Therefore, conservation strategies should prioritize reforestation using seeds from high resin-producing trees that also exhibit high germination capacity, thereby helping maintain forest persistence and productivity.
- Open Access
- 16 June 2025
- Published by Universidad Juarez Autonoma de Tabasco in Ecosistemas y Recursos Agropecuarios
- Vol. 12 (2)
Calidad de planta de progenies superiores en producción de resina de Pinus pseudostrobus LINDL.
In the propagation of plants in nurseries, it is important to define quality parameters to ensure their survival in the field. There is no evaluation of superior progenies in resin production in Michoacán, even though this economic activity is the most important in non-timber production. The objective was to generate plant quality parameters for dominant progenies at the site with resin production of Pinus pseudostrobus. In 2019, seed of 27 outstanding progenies in resin production was collected and five months after sowing they were transplanted into polyethylene bags and placed under the experimental design of random blocks with five repetitions, where the most vigorous individuals that represented the greatest number of individuals were included. potential. At 15 months after the transplant, the total height, basal diameter and biomass were evaluated, in addition, the slenderness indices, Dickson quality and lignification were calculated; intervals in plant quality indices or relationships were also determined. The analysis of variance and the Student-Newman-Keuls mean separation test show highly significant differences between the progenies (α = 0.01). The Llano 2 progeny is resistant to environmental effects, while Gómez 8 and Pascuala 9 have medium growth and more than 57.2 g biomass but are the most suitable for establishing plantations for resin production, given their morphological characteristics and plant quality indices. The plant quality indices generated and used in this study are easy to implement and interpret in forest nurseries for the identification of quality plants.
- 16 June 2025
- Published by Universidad Juarez Autonoma de Tabasco in Ecosistemas y Recursos Agropecuarios
- Vol. 12 (2)
Open AccessCalidad de planta de progenies superiores en producción de resina de Pinus pseudostrobus LINDL.
In the propagation of plants in nurseries, it is important to define quality parameters to ensure their survival in the field. There is no evaluation of superior progenies in resin production in Michoacán, even though this economic activity is the most important in non-timber production. The objective was to generate plant quality parameters for dominant progenies at the site with resin production of Pinus pseudostrobus. In 2019, seed of 27 outstanding progenies in resin production was collected and five months after sowing they were transplanted into polyethylene bags and placed under the experimental design of random blocks with five repetitions, where the most vigorous individuals that represented the greatest number of individuals were included. potential. At 15 months after the transplant, the total height, basal diameter and biomass were evaluated, in addition, the slenderness indices, Dickson quality and lignification were calculated; intervals in plant quality indices or relationships were also determined. The analysis of variance and the Student-Newman-Keuls mean separation test show highly significant differences between the progenies (α = 0.01). The Llano 2 progeny is resistant to environmental effects, while Gómez 8 and Pascuala 9 have medium growth and more than 57.2 g biomass but are the most suitable for establishing plantations for resin production, given their morphological characteristics and plant quality indices. The plant quality indices generated and used in this study are easy to implement and interpret in forest nurseries for the identification of quality plants.
- Open Access
Genetic Parameters and Family Selection of Pinus pseudostrobus var. apulcensis Through Growth and Stem Quality in Mixteca Oaxaqueña Region, Mexico
The Mixteca Oaxaqueña region has historically suffered from soil and vegetation loss. However, since the last decade of the previous century, successful reforestation efforts have been carried out in many areas. As a result, there is now a need to select phenotypes with superior growth and good wood quality. This study aimed to estimate genetic parameters and identify superior families of Apulco pine (Pinus pseudostrobus var. apulcensis (Lindl.) Shaw) based on growth and stem quality traits. After four years, growth and stem quality traits were evaluated in 64 open-pollinated families. Different selection intensities were tested using two evaluation methods. All traits showed significant differences among families (p ≤ 0.0016), with genetic coefficients of variation ranging from 8.01% to 18.84%. Heritability estimates for growth traits were high ( = 0.42−0.66; = 0.55−0.63), whereas heritability for stem quality traits was slightly lower ( = 0.01−0.38; = 0.01−0.38). Genetic correlations (rg) among growth traits were high and positive (rg ≥ 0.857), while correlations among stem quality traits and between quality and growth traits were more variable (r9 = −0.498 to 0.899). Based on both evaluation methods and a 25% selection intensity, sixteen superior families were identified, showing estimated genetic gains of approximately 4% for growth-related traits. These families are recommended for use in timber plantations, whereas a broader set is suggested for reforestation efforts in order to maintain genetic diversity.Open AccessGenetic Parameters and Family Selection of Pinus pseudostrobus var. apulcensis Through Growth and Stem Quality in Mixteca Oaxaqueña Region, Mexico
The Mixteca Oaxaqueña region has historically suffered from soil and vegetation loss. However, since the last decade of the previous century, successful reforestation efforts have been carried out in many areas. As a result, there is now a need to select phenotypes with superior growth and good wood quality. This study aimed to estimate genetic parameters and identify superior families of Apulco pine (Pinus pseudostrobus var. apulcensis (Lindl.) Shaw) based on growth and stem quality traits. After four years, growth and stem quality traits were evaluated in 64 open-pollinated families. Different selection intensities were tested using two evaluation methods. All traits showed significant differences among families (p ≤ 0.0016), with genetic coefficients of variation ranging from 8.01% to 18.84%. Heritability estimates for growth traits were high ( = 0.42−0.66; = 0.55−0.63), whereas heritability for stem quality traits was slightly lower ( = 0.01−0.38; = 0.01−0.38). Genetic correlations (rg) among growth traits were high and positive (rg ≥ 0.857), while correlations among stem quality traits and between quality and growth traits were more variable (r9 = −0.498 to 0.899). Based on both evaluation methods and a 25% selection intensity, sixteen superior families were identified, showing estimated genetic gains of approximately 4% for growth-related traits. These families are recommended for use in timber plantations, whereas a broader set is suggested for reforestation efforts in order to maintain genetic diversity. - Open Access
- 21 May 2025
- Published by Colegio de Postgraduados in Agro Productividad
La multidimensionalidad de la Ecofisiología en bosques
Objetivo: Este estudio pretende describir la multidimensionalidad y la importancia de la ecofisiología de los bosques en el contexto del cambio climático.Diseño/Metodología/Enfoque: Se realizó una revisión exhaustiva y clasificación de artículos científicos indexados en el repositorio Google Scholar. La atención se centró en artículos relacionados con la importancia, funciones e historia de la ecofisiología, así como su relación con los bosques.Resultados: El campo de los estudios ecofisiológicos es fundamental para comprender cómo han evolucionado las plantas en respuesta a los cambios ambientales a lo largo del tiempo. La investigación en esta disciplina ha aumentado considerablemente en la última década, sobre todo en lo que se refiere a los aspectos relacionados con el cambio climático.Limitaciones del estudio/implicaciones: Esta revisión se basó exclusivamente en publicaciones disponibles en Google Scholar.Resultados/conclusiones: Hallazgos/conclusiones: El conocimiento de la ecofisiología forestal es fundamental para predecir cómo podrían adaptarse las plantas a futuros cambios medioambientales, incluidos los efectos del cambio climático.
- 21 May 2025
- Published by Colegio de Postgraduados in Agro Productividad
Open AccessLa multidimensionalidad de la Ecofisiología en bosques
Objetivo: Este estudio pretende describir la multidimensionalidad y la importancia de la ecofisiología de los bosques en el contexto del cambio climático.Diseño/Metodología/Enfoque: Se realizó una revisión exhaustiva y clasificación de artículos científicos indexados en el repositorio Google Scholar. La atención se centró en artículos relacionados con la importancia, funciones e historia de la ecofisiología, así como su relación con los bosques.Resultados: El campo de los estudios ecofisiológicos es fundamental para comprender cómo han evolucionado las plantas en respuesta a los cambios ambientales a lo largo del tiempo. La investigación en esta disciplina ha aumentado considerablemente en la última década, sobre todo en lo que se refiere a los aspectos relacionados con el cambio climático.Limitaciones del estudio/implicaciones: Esta revisión se basó exclusivamente en publicaciones disponibles en Google Scholar.Resultados/conclusiones: Hallazgos/conclusiones: El conocimiento de la ecofisiología forestal es fundamental para predecir cómo podrían adaptarse las plantas a futuros cambios medioambientales, incluidos los efectos del cambio climático.
- Open Access
- 2 May 2025
- Published by Revista Mexicana de Ciencias Forestales in Revista Mexicana de Ciencias Forestales
- Vol. 16 (89) , 59-83
Ecuaciones de ahusamiento y volumen implícito para Pinus leiophylla Schiede ex Schltdl. & Cham. en Michoacán
La descripción del ahusamiento (di) y la estimación precisa del volumen fustal (Vf) son fundamentales en la estimación de las existencias maderables y la distribución de productos. El objetivo del estudio fue ajustar una función de ahusamiento y definir el modelo de Vf implícito para árboles de Pinus leiophylla en la comunidad indígena Patambán, Tangancícuaro, Michoacán, México. Con información de 36 árboles dominantes provenientes de plantaciones forestales (245 datos de diámetro normal [d], diámetros [di] y alturas [Ai] a distintas secciones del fuste), se ajustaron ocho funciones de ahusamiento. Mediante Modelos de efectos mixtos (MEM) y la técnica de Máxima verosimilitud se realizó la corrección de heterocedasticidad y autocorrelación, con la expresión varExp: y una estructura de media móvil (ARMA) de orden (p, q), respectivamente. Estadísticamente, la expresión de ahusamiento de Clutter: fue más precisa al incluir de forma aditiva el efecto aleatorio ( ) en el parámetro relacionado a la altura total (At). La explicación de la variabilidad muestral fue de 97.8 %, con un error global de estimación de 1.406 cm y sesgo individual de 0.0138 cm. El modelo de Vf implícito fue Schumacher-Hall: (d y At en m). Las expresiones propuestas pueden incluirse de manera confiable en la descripción de datos de inventarios o en las estimaciones de rendimiento para cultivos forestales.
- 2 May 2025
- Published by Revista Mexicana de Ciencias Forestales in Revista Mexicana de Ciencias Forestales
- Vol. 16 (89) , 59-83
Open AccessEcuaciones de ahusamiento y volumen implícito para Pinus leiophylla Schiede ex Schltdl. & Cham. en Michoacán
La descripción del ahusamiento (di) y la estimación precisa del volumen fustal (Vf) son fundamentales en la estimación de las existencias maderables y la distribución de productos. El objetivo del estudio fue ajustar una función de ahusamiento y definir el modelo de Vf implícito para árboles de Pinus leiophylla en la comunidad indígena Patambán, Tangancícuaro, Michoacán, México. Con información de 36 árboles dominantes provenientes de plantaciones forestales (245 datos de diámetro normal [d], diámetros [di] y alturas [Ai] a distintas secciones del fuste), se ajustaron ocho funciones de ahusamiento. Mediante Modelos de efectos mixtos (MEM) y la técnica de Máxima verosimilitud se realizó la corrección de heterocedasticidad y autocorrelación, con la expresión varExp: y una estructura de media móvil (ARMA) de orden (p, q), respectivamente. Estadísticamente, la expresión de ahusamiento de Clutter: fue más precisa al incluir de forma aditiva el efecto aleatorio ( ) en el parámetro relacionado a la altura total (At). La explicación de la variabilidad muestral fue de 97.8 %, con un error global de estimación de 1.406 cm y sesgo individual de 0.0138 cm. El modelo de Vf implícito fue Schumacher-Hall: (d y At en m). Las expresiones propuestas pueden incluirse de manera confiable en la descripción de datos de inventarios o en las estimaciones de rendimiento para cultivos forestales.
- 28 March 2025
- Published by Editora Artemis
- p. 63-71
LA DIVERSIDAD GENÉTICA DE Pinus oocarpa: UN RECURSO CLAVE PARA SU MEJORAMIENTO Y PRODUCCIÓN SOSTENIBLE DE RESINA
- 28 March 2025
- Published by Editora Artemis
- p. 63-71
LA DIVERSIDAD GENÉTICA DE Pinus oocarpa: UN RECURSO CLAVE PARA SU MEJORAMIENTO Y PRODUCCIÓN SOSTENIBLE DE RESINA
- Open Access
Genetic Diversity and Structure of Higher-Resin Trees of Pinus oocarpa Schiede in Mexico: Implications for Genetic Improvement
Pinus oocarpa Schiede is the most widely distributed conifer in the Americas. In Mexico, it inhabits diverse environments and is the primary pine species utilized for resin production, prompting the establishment of a genetic improvement program (GIP). Preserving a broad genetic diversity is fundamental to the success of the GIP. This study aimed to assess the genetic diversity and structure of trees selected for their high resin yield. A total of 146 trees from 15 provenances within three populations (MX-MIC, MX-MEX, and MX-OAX) constituting the selection population of the GIP were evaluated. Five SSR microsatellite markers (PtTX3013, NZPR1078, PtTX2146, PtTX3107, and PtTX3034) were used to determine key indicators of genetic diversity and structure. All three populations exhibited high genetic diversity; however, the heterozygosity observed was lower than the expected heterozygosity. Genetic structure analysis revealed the presence of two distinct genetic groups: the Transverse Volcanic Axis (MX-MIC and MX-MEX) and the Sierra Madre del Sur (MX-OAX). Most of the genetic diversity (87.42%) was found within provenances. Gene flow was high among provenances within the same genetic group but limited between provenances from different groups. The findings suggest that GIPs should be tailored to each genetic region, with a focus on within-provenance selection to maintain genetic diversity.
Open AccessGenetic Diversity and Structure of Higher-Resin Trees of Pinus oocarpa Schiede in Mexico: Implications for Genetic Improvement
Pinus oocarpa Schiede is the most widely distributed conifer in the Americas. In Mexico, it inhabits diverse environments and is the primary pine species utilized for resin production, prompting the establishment of a genetic improvement program (GIP). Preserving a broad genetic diversity is fundamental to the success of the GIP. This study aimed to assess the genetic diversity and structure of trees selected for their high resin yield. A total of 146 trees from 15 provenances within three populations (MX-MIC, MX-MEX, and MX-OAX) constituting the selection population of the GIP were evaluated. Five SSR microsatellite markers (PtTX3013, NZPR1078, PtTX2146, PtTX3107, and PtTX3034) were used to determine key indicators of genetic diversity and structure. All three populations exhibited high genetic diversity; however, the heterozygosity observed was lower than the expected heterozygosity. Genetic structure analysis revealed the presence of two distinct genetic groups: the Transverse Volcanic Axis (MX-MIC and MX-MEX) and the Sierra Madre del Sur (MX-OAX). Most of the genetic diversity (87.42%) was found within provenances. Gene flow was high among provenances within the same genetic group but limited between provenances from different groups. The findings suggest that GIPs should be tailored to each genetic region, with a focus on within-provenance selection to maintain genetic diversity.
- Open Access
- 6 August 2024
- Published by Instituto de Ecologia, A.C. in Madera y Bosques
- Vol. 30 (1)
Relación no-lineal generalizada altura total-diámetro normal para Pinus greggii y Pinus pseudostrobus en Oaxaca, México
La altura total de los árboles es una variable importante en la silvicultura y manejo forestal, pero la medición en campo es difícil y costosa, incluso se cometen errores que alteran su dimensión y registro. El objetivo de este estudio fue encontrar la mejor ecuación generalizada no lineal para describir la relación altura-diámetro normal para las plantaciones de Pinus greggii y Pinus pseudostrobus en la Mixteca Oaxaqueña. Se utilizó una muestra de 1180 árboles, midiéndose el diámetro normal (dn) y altura (At), asimismo se determinaron variables de rodal. Se evaluaron seis ecuaciones que se ajustaron sin el intercepto 1.30 m que corresponde al dn; la mejor ecuación se seleccionó mediante un análisis cuantitativo y gráfico. La ecuación de Omule y MacDonald fue ligeramente mejor que el resto en las estimaciones y en los análisis gráficos para describir el comportamiento de la altura de los árboles, cumpliendo con los supuestos de normalidad, homogeneidad de varianza e independencia de residuos. La ecuación seleccionada explicó más de 90% de la variabilidad total de las alturas, con una raíz del error medio cuadrático que osciló entre 0.470 m y 0.600 m y sesgos de -0.051 m a 0.022 m para ambas especies. Esta es la primera ecuación de este tipo que se desarrolla para las especies en la zona, por lo que su aplicación será útil en los inventarios forestales.
- 6 August 2024
- Published by Instituto de Ecologia, A.C. in Madera y Bosques
- Vol. 30 (1)
Open AccessRelación no-lineal generalizada altura total-diámetro normal para Pinus greggii y Pinus pseudostrobus en Oaxaca, México
La altura total de los árboles es una variable importante en la silvicultura y manejo forestal, pero la medición en campo es difícil y costosa, incluso se cometen errores que alteran su dimensión y registro. El objetivo de este estudio fue encontrar la mejor ecuación generalizada no lineal para describir la relación altura-diámetro normal para las plantaciones de Pinus greggii y Pinus pseudostrobus en la Mixteca Oaxaqueña. Se utilizó una muestra de 1180 árboles, midiéndose el diámetro normal (dn) y altura (At), asimismo se determinaron variables de rodal. Se evaluaron seis ecuaciones que se ajustaron sin el intercepto 1.30 m que corresponde al dn; la mejor ecuación se seleccionó mediante un análisis cuantitativo y gráfico. La ecuación de Omule y MacDonald fue ligeramente mejor que el resto en las estimaciones y en los análisis gráficos para describir el comportamiento de la altura de los árboles, cumpliendo con los supuestos de normalidad, homogeneidad de varianza e independencia de residuos. La ecuación seleccionada explicó más de 90% de la variabilidad total de las alturas, con una raíz del error medio cuadrático que osciló entre 0.470 m y 0.600 m y sesgos de -0.051 m a 0.022 m para ambas especies. Esta es la primera ecuación de este tipo que se desarrolla para las especies en la zona, por lo que su aplicación será útil en los inventarios forestales.
- Open Access
- 27 June 2024
- Published by Universidad Distrital Francisco Jose de Caldas in Colombia forestal
- Vol. 27 (2) , e21313
Análisis tecnológico en Gmelina arborea Roxb. proveniente de rodales juveniles puros y mezclados en México
Gmelina arborea es una especie que ostenta valor económico en los mercados forestales, esencialmente por la versatilidad de su biomasa, su rápido crecimiento y la calidad de su madera. Los objetivos principales de esta investigación fueron evaluar la dendrometría, la biomasa, el suelo y las propiedades físicas y mecánicas de la madera en dos rodales de 18 años. En parcelas rectangulares de 1000 m2 se recabó información dasométrica de 20 árboles, además de fracciones de madera para ensayos físicos-mecánicos en laboratorio. En términos estadísticos, la G. arborea del rodal mezclado presentó mayor diámetro (7.3 %) y biomasa del fuste (5.1 %), además de un impacto en las propiedades mecánicas (8.1 %) y la dureza en sus diferentes ejes (long. 6.2 %, rad. 1.5 % y tang. 6.3 %). Se deduce que los rodales mezclados contribuyen a una mayor biomasa y a madera de mejor resistencia y calidad en G. arborea.
- 27 June 2024
- Published by Universidad Distrital Francisco Jose de Caldas in Colombia forestal
- Vol. 27 (2) , e21313
Open AccessAnálisis tecnológico en Gmelina arborea Roxb. proveniente de rodales juveniles puros y mezclados en México
Gmelina arborea es una especie que ostenta valor económico en los mercados forestales, esencialmente por la versatilidad de su biomasa, su rápido crecimiento y la calidad de su madera. Los objetivos principales de esta investigación fueron evaluar la dendrometría, la biomasa, el suelo y las propiedades físicas y mecánicas de la madera en dos rodales de 18 años. En parcelas rectangulares de 1000 m2 se recabó información dasométrica de 20 árboles, además de fracciones de madera para ensayos físicos-mecánicos en laboratorio. En términos estadísticos, la G. arborea del rodal mezclado presentó mayor diámetro (7.3 %) y biomasa del fuste (5.1 %), además de un impacto en las propiedades mecánicas (8.1 %) y la dureza en sus diferentes ejes (long. 6.2 %, rad. 1.5 % y tang. 6.3 %). Se deduce que los rodales mezclados contribuyen a una mayor biomasa y a madera de mejor resistencia y calidad en G. arborea.
- Open Access
- 19 April 2024
- Published by Universidad Juarez Autonoma de Tabasco in Ecosistemas y Recursos Agropecuarios
- Vol. 11 (2)
Estimación de biomasa y carbono aéreo en bosques templados del sur de México
Forest inventories are tools that allow the collection and recording of information for the estimation of volume and biomass in order to determine carbon sequestration in forest biomass using regression techniques. The objective of the study was to generate allometric equation parameters that accurately estimate the biomass and total aboveground carbon content of 25 temperate species from UMAFOR 2012, San Juan Quiahije, Oaxaca. Circular sampling sites of 1000 m2 were established, where the normal diameter and total height of 16 863 trees of 25 species were taken; subsequently, biomass and aboveground carbon content were estimated through allometric equations, using SAS software. The simultaneous potential equation had the best goodness of fit, where the adjusted coefficient of determination (R2adj) was over 87% for total biomass, while the total carbon estimate had an R2adj of 99% for all species. Pinus maximinoi had the highest average biomass (35 971.85 and 2 922.03 kg) and carbon content (17 985.92 and 1 462.01 kg) in branches and stems, respectively.
- 19 April 2024
- Published by Universidad Juarez Autonoma de Tabasco in Ecosistemas y Recursos Agropecuarios
- Vol. 11 (2)
Open AccessEstimación de biomasa y carbono aéreo en bosques templados del sur de México
Forest inventories are tools that allow the collection and recording of information for the estimation of volume and biomass in order to determine carbon sequestration in forest biomass using regression techniques. The objective of the study was to generate allometric equation parameters that accurately estimate the biomass and total aboveground carbon content of 25 temperate species from UMAFOR 2012, San Juan Quiahije, Oaxaca. Circular sampling sites of 1000 m2 were established, where the normal diameter and total height of 16 863 trees of 25 species were taken; subsequently, biomass and aboveground carbon content were estimated through allometric equations, using SAS software. The simultaneous potential equation had the best goodness of fit, where the adjusted coefficient of determination (R2adj) was over 87% for total biomass, while the total carbon estimate had an R2adj of 99% for all species. Pinus maximinoi had the highest average biomass (35 971.85 and 2 922.03 kg) and carbon content (17 985.92 and 1 462.01 kg) in branches and stems, respectively.