Qiaomei Chen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Qiaomei Chen has a total of 89 co-authors. Here are the top co-authors by number of shared publications:
- Weiwei Li
Beijing Advanced Innovation Center for Soft Matter Science and Engineering & State Key Laboratory of Organic‐Inorganic Composites Beijing University of Chemical Technology Beijing P. R. China
22 shared publications - Yen Wei
Tsinghua University
9 shared publications - Yan Ji
Tsinghua University
8 shared publications Zihao Gao
Beijing Advanced Innovation Center for Soft Matter Science and Engineering & State Key Laboratory of Organic‐Inorganic Composites Beijing University of Chemical Technology Beijing P. R. China
8 shared publications- Yang Yang
Institute of Nuclear and New Energy Technology Tsinghua University Beijing China
7 shared publications Bo Wang
Beijing Advanced Innovation Center for Soft Matter Science and Engineering & State Key Laboratory of Organic‐Inorganic Composites Beijing University of Chemical Technology Beijing P. R. China
6 shared publications
Latest Publications
- 19 October 2026
- Published by Wiley in Angewandte Chemie International Edition
- p. e1010721
Zwitterion‐Regulated Carbazole Phosphonic Acid Self‐Assembled Monolayers via Proton Transfer and Electrostatic Interactions for 21% Organic Solar Cells
The efficiency and stability of high‐performance organic solar cells (OSCs) are increasingly determined by the interfacial quality of self‐assembled monolayer (SAM)‐based hole‐selective layers. Carbazole phosphonic‐acid SAMs such as 2PACz are prone to aggregation in alcoholic precursor solutions because of phosphonic‐acid hydrogen bonding and carbazole π–π interactions, leading to incomplete coverage, nonuniform anchoring, and local electrostatic heterogeneity. Here, we incorporate trimethylglycine (TMG) into 2PACz SAMs to induce proton‐transfer‐coupled charge‐state regulation. Through acid–base association, partial proton transfer from 2PACz to TMG alters the protonation state and local electronic environment of 2PACz. At the molecular‐assembly level, this regulation, together with zwitterion‐derived electrostatic interactions, suppresses 2PACz self‐association and improves solution‐state dispersion. At the interfacial‐anchoring level, the increased phosphonate character favors charge‐assisted P–O–M coordination with ITO, enhancing anchoring stability. The resulting 2PACz:TMG layer exhibits improved coverage, surface‐potential homogeneity, and interfacial robustness, reducing recombination and leakage while facilitating charge extraction. D18:L8‐BO binary OSCs achieve a PCE of 20.52%, while ternary devices reach 21.07%. The strategy also shows broad applicability, enables 18.02% efficiency in 1 cm 2 devices, and improves thermal and light stability. These results establish proton‐transfer‐coupled charge‐state regulation as an effective route to simultaneously control molecular assembly, SAM formation uniformity, and interfacial anchoring in phosphonic‐acid SAMs.
- 19 October 2026
- Published by Wiley in Angewandte Chemie International Edition
- p. e1010721
Zwitterion‐Regulated Carbazole Phosphonic Acid Self‐Assembled Monolayers via Proton Transfer and Electrostatic Interactions for 21% Organic Solar Cells
The efficiency and stability of high‐performance organic solar cells (OSCs) are increasingly determined by the interfacial quality of self‐assembled monolayer (SAM)‐based hole‐selective layers. Carbazole phosphonic‐acid SAMs such as 2PACz are prone to aggregation in alcoholic precursor solutions because of phosphonic‐acid hydrogen bonding and carbazole π–π interactions, leading to incomplete coverage, nonuniform anchoring, and local electrostatic heterogeneity. Here, we incorporate trimethylglycine (TMG) into 2PACz SAMs to induce proton‐transfer‐coupled charge‐state regulation. Through acid–base association, partial proton transfer from 2PACz to TMG alters the protonation state and local electronic environment of 2PACz. At the molecular‐assembly level, this regulation, together with zwitterion‐derived electrostatic interactions, suppresses 2PACz self‐association and improves solution‐state dispersion. At the interfacial‐anchoring level, the increased phosphonate character favors charge‐assisted P–O–M coordination with ITO, enhancing anchoring stability. The resulting 2PACz:TMG layer exhibits improved coverage, surface‐potential homogeneity, and interfacial robustness, reducing recombination and leakage while facilitating charge extraction. D18:L8‐BO binary OSCs achieve a PCE of 20.52%, while ternary devices reach 21.07%. The strategy also shows broad applicability, enables 18.02% efficiency in 1 cm 2 devices, and improves thermal and light stability. These results establish proton‐transfer‐coupled charge‐state regulation as an effective route to simultaneously control molecular assembly, SAM formation uniformity, and interfacial anchoring in phosphonic‐acid SAMs.
- 19 October 2026
- Published by Wiley in Angewandte Chemie
- p. e1010721
Zwitterion‐Regulated Carbazole Phosphonic Acid Self‐Assembled Monolayers via Proton Transfer and Electrostatic Interactions for 21% Organic Solar Cells
The efficiency and stability of high‐performance organic solar cells (OSCs) are increasingly determined by the interfacial quality of self‐assembled monolayer (SAM)‐based hole‐selective layers. Carbazole phosphonic‐acid SAMs such as 2PACz are prone to aggregation in alcoholic precursor solutions because of phosphonic‐acid hydrogen bonding and carbazole π–π interactions, leading to incomplete coverage, nonuniform anchoring, and local electrostatic heterogeneity. Here, we incorporate trimethylglycine (TMG) into 2PACz SAMs to induce proton‐transfer‐coupled charge‐state regulation. Through acid–base association, partial proton transfer from 2PACz to TMG alters the protonation state and local electronic environment of 2PACz. At the molecular‐assembly level, this regulation, together with zwitterion‐derived electrostatic interactions, suppresses 2PACz self‐association and improves solution‐state dispersion. At the interfacial‐anchoring level, the increased phosphonate character favors charge‐assisted P–O–M coordination with ITO, enhancing anchoring stability. The resulting 2PACz:TMG layer exhibits improved coverage, surface‐potential homogeneity, and interfacial robustness, reducing recombination and leakage while facilitating charge extraction. D18:L8‐BO binary OSCs achieve a PCE of 20.52%, while ternary devices reach 21.07%. The strategy also shows broad applicability, enables 18.02% efficiency in 1 cm 2 devices, and improves thermal and light stability. These results establish proton‐transfer‐coupled charge‐state regulation as an effective route to simultaneously control molecular assembly, SAM formation uniformity, and interfacial anchoring in phosphonic‐acid SAMs.
- 19 October 2026
- Published by Wiley in Angewandte Chemie
- p. e1010721
Zwitterion‐Regulated Carbazole Phosphonic Acid Self‐Assembled Monolayers via Proton Transfer and Electrostatic Interactions for 21% Organic Solar Cells
The efficiency and stability of high‐performance organic solar cells (OSCs) are increasingly determined by the interfacial quality of self‐assembled monolayer (SAM)‐based hole‐selective layers. Carbazole phosphonic‐acid SAMs such as 2PACz are prone to aggregation in alcoholic precursor solutions because of phosphonic‐acid hydrogen bonding and carbazole π–π interactions, leading to incomplete coverage, nonuniform anchoring, and local electrostatic heterogeneity. Here, we incorporate trimethylglycine (TMG) into 2PACz SAMs to induce proton‐transfer‐coupled charge‐state regulation. Through acid–base association, partial proton transfer from 2PACz to TMG alters the protonation state and local electronic environment of 2PACz. At the molecular‐assembly level, this regulation, together with zwitterion‐derived electrostatic interactions, suppresses 2PACz self‐association and improves solution‐state dispersion. At the interfacial‐anchoring level, the increased phosphonate character favors charge‐assisted P–O–M coordination with ITO, enhancing anchoring stability. The resulting 2PACz:TMG layer exhibits improved coverage, surface‐potential homogeneity, and interfacial robustness, reducing recombination and leakage while facilitating charge extraction. D18:L8‐BO binary OSCs achieve a PCE of 20.52%, while ternary devices reach 21.07%. The strategy also shows broad applicability, enables 18.02% efficiency in 1 cm 2 devices, and improves thermal and light stability. These results establish proton‐transfer‐coupled charge‐state regulation as an effective route to simultaneously control molecular assembly, SAM formation uniformity, and interfacial anchoring in phosphonic‐acid SAMs.
- 29 September 2026
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 65 (46)
A 3D Cycloparaphenylene‐Cored Trimeric Electron Acceptor Regulates Acceptor Fibril Morphology for 20.6%‐Efficient Ternary Organic Solar Cells
The application of cycloparaphenylene (CPP) macrocycles in organic photovoltaics has remained largely unexplored despite their unique three‐dimensional (3D) topologies. Herein, we expand the functional scope of CPPs by covalently integrating a carbon‐nanohoop scaffold with Y‐series electron acceptors to develop a novel 3D trimeric acceptor, CPP‐3Y. Distinct from conventional planar molecules, CPP‐3Y combines radially oriented π‐conjugation, a continuously curved π‐surface, and sterically hindered 3D topology, resulting in strong aggregation with low crystallinity. When introduced as a third component into the D18:L8‐BO‐X binary system, CPP‐3Y preferentially associates with the L8‐BO‐X‐rich acceptor phase, resulting in large fibrillar structures in blended thin films. This narrows the energetic tail‐state distribution, suppresses trap‐assisted and non‐radiative recombination, and enables more balanced charge transport. Consequently, D18:L8‐BO‐X:CPP‐3Y ternary OSCs achieve a PCE of 20.62%, outperforming binary devices (19.90%). They also retain over 80% of their initial efficiency after 964 h at 70 °C, whereas the binary devices fall below this level after 432 h. This work demonstrates that cyclic electron acceptors with 3D configurations and strong aggregation can act as morphological regulators to tune the phase separation of photoactive layers and hence realize high PCEs in OSCs.
- 29 September 2026
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 65 (46)
A 3D Cycloparaphenylene‐Cored Trimeric Electron Acceptor Regulates Acceptor Fibril Morphology for 20.6%‐Efficient Ternary Organic Solar Cells
The application of cycloparaphenylene (CPP) macrocycles in organic photovoltaics has remained largely unexplored despite their unique three‐dimensional (3D) topologies. Herein, we expand the functional scope of CPPs by covalently integrating a carbon‐nanohoop scaffold with Y‐series electron acceptors to develop a novel 3D trimeric acceptor, CPP‐3Y. Distinct from conventional planar molecules, CPP‐3Y combines radially oriented π‐conjugation, a continuously curved π‐surface, and sterically hindered 3D topology, resulting in strong aggregation with low crystallinity. When introduced as a third component into the D18:L8‐BO‐X binary system, CPP‐3Y preferentially associates with the L8‐BO‐X‐rich acceptor phase, resulting in large fibrillar structures in blended thin films. This narrows the energetic tail‐state distribution, suppresses trap‐assisted and non‐radiative recombination, and enables more balanced charge transport. Consequently, D18:L8‐BO‐X:CPP‐3Y ternary OSCs achieve a PCE of 20.62%, outperforming binary devices (19.90%). They also retain over 80% of their initial efficiency after 964 h at 70 °C, whereas the binary devices fall below this level after 432 h. This work demonstrates that cyclic electron acceptors with 3D configurations and strong aggregation can act as morphological regulators to tune the phase separation of photoactive layers and hence realize high PCEs in OSCs.
- 29 September 2026
- Published by Wiley in Angewandte Chemie
- Vol. 138 (46) , e8288920
A 3D Cycloparaphenylene‐Cored Trimeric Electron Acceptor Regulates Acceptor Fibril Morphology for 20.6%‐Efficient Ternary Organic Solar Cells
The application of cycloparaphenylene (CPP) macrocycles in organic photovoltaics has remained largely unexplored despite their unique three‐dimensional (3D) topologies. Herein, we expand the functional scope of CPPs by covalently integrating a carbon‐nanohoop scaffold with Y‐series electron acceptors to develop a novel 3D trimeric acceptor, CPP‐3Y. Distinct from conventional planar molecules, CPP‐3Y combines radially oriented π‐conjugation, a continuously curved π‐surface, and sterically hindered 3D topology, resulting in strong aggregation with low crystallinity. When introduced as a third component into the D18:L8‐BO‐X binary system, CPP‐3Y preferentially associates with the L8‐BO‐X‐rich acceptor phase, resulting in large fibrillar structures in blended thin films. This narrows the energetic tail‐state distribution, suppresses trap‐assisted and non‐radiative recombination, and enables more balanced charge transport. Consequently, D18:L8‐BO‐X:CPP‐3Y ternary OSCs achieve a PCE of 20.62%, outperforming binary devices (19.90%). They also retain over 80% of their initial efficiency after 964 h at 70 °C, whereas the binary devices fall below this level after 432 h. This work demonstrates that cyclic electron acceptors with 3D configurations and strong aggregation can act as morphological regulators to tune the phase separation of photoactive layers and hence realize high PCEs in OSCs.
- 29 September 2026
- Published by Wiley in Angewandte Chemie
- Vol. 138 (46) , e8288920
A 3D Cycloparaphenylene‐Cored Trimeric Electron Acceptor Regulates Acceptor Fibril Morphology for 20.6%‐Efficient Ternary Organic Solar Cells
The application of cycloparaphenylene (CPP) macrocycles in organic photovoltaics has remained largely unexplored despite their unique three‐dimensional (3D) topologies. Herein, we expand the functional scope of CPPs by covalently integrating a carbon‐nanohoop scaffold with Y‐series electron acceptors to develop a novel 3D trimeric acceptor, CPP‐3Y. Distinct from conventional planar molecules, CPP‐3Y combines radially oriented π‐conjugation, a continuously curved π‐surface, and sterically hindered 3D topology, resulting in strong aggregation with low crystallinity. When introduced as a third component into the D18:L8‐BO‐X binary system, CPP‐3Y preferentially associates with the L8‐BO‐X‐rich acceptor phase, resulting in large fibrillar structures in blended thin films. This narrows the energetic tail‐state distribution, suppresses trap‐assisted and non‐radiative recombination, and enables more balanced charge transport. Consequently, D18:L8‐BO‐X:CPP‐3Y ternary OSCs achieve a PCE of 20.62%, outperforming binary devices (19.90%). They also retain over 80% of their initial efficiency after 964 h at 70 °C, whereas the binary devices fall below this level after 432 h. This work demonstrates that cyclic electron acceptors with 3D configurations and strong aggregation can act as morphological regulators to tune the phase separation of photoactive layers and hence realize high PCEs in OSCs.
- 6 August 2026
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 65 (41) , e5303924
Dynamic Disulfide‐Linked Dimeric Acceptors for High‐Efficiency and Mechanically Robust Organic Solar Cells
The practical application of organic solar cells (OSCs) in wearable electronics requires simultaneous improvements in efficiency, stability, and mechanical robustness. In this study, we developed a disulfide‐linked dimeric acceptor, DY‐SS, by integrating an exchangeable dynamic covalent linkage into the backbone of a photoactive acceptor, representing, to our knowledge, the first photoactive material framework containing exchangeable dynamic covalent linkages. DY‐SS acts as an energetic and morphological regulator, reducing non‐radiative energy loss, modulating crystallization kinetics, and enhancing molecular packing coherence. Consequently, the ternary devices achieve a high PCE of 20.40%, compared with 19.64% for the binary control, accompanied by a 1.62‐fold extension of the T 80 thermal lifetime. In the presence of trace thioctic acid, thermally activated disulfide exchange enables the formation of an adaptive covalent network, which promotes stress dissipation and markedly improves film toughness and yielding a markedly increased crack‐onset strain of 16.07% (3.89‐fold over the binary control) and a 7.54‐fold enhancement in toughness. Notably, the toughened flexible OSCs demonstrate unprecedented mechanical durability, retaining 91.1% of their initial efficiency even after 10 5 bending cycles under the extreme condition of a 1 mm bending radius (vs. 82.1% for the control). This work provides a dynamic‐bond‐containing molecular design strategy for efficient and mechanically robust OSCs.
- 6 August 2026
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 65 (41) , e5303924
Dynamic Disulfide‐Linked Dimeric Acceptors for High‐Efficiency and Mechanically Robust Organic Solar Cells
The practical application of organic solar cells (OSCs) in wearable electronics requires simultaneous improvements in efficiency, stability, and mechanical robustness. In this study, we developed a disulfide‐linked dimeric acceptor, DY‐SS, by integrating an exchangeable dynamic covalent linkage into the backbone of a photoactive acceptor, representing, to our knowledge, the first photoactive material framework containing exchangeable dynamic covalent linkages. DY‐SS acts as an energetic and morphological regulator, reducing non‐radiative energy loss, modulating crystallization kinetics, and enhancing molecular packing coherence. Consequently, the ternary devices achieve a high PCE of 20.40%, compared with 19.64% for the binary control, accompanied by a 1.62‐fold extension of the T 80 thermal lifetime. In the presence of trace thioctic acid, thermally activated disulfide exchange enables the formation of an adaptive covalent network, which promotes stress dissipation and markedly improves film toughness and yielding a markedly increased crack‐onset strain of 16.07% (3.89‐fold over the binary control) and a 7.54‐fold enhancement in toughness. Notably, the toughened flexible OSCs demonstrate unprecedented mechanical durability, retaining 91.1% of their initial efficiency even after 10 5 bending cycles under the extreme condition of a 1 mm bending radius (vs. 82.1% for the control). This work provides a dynamic‐bond‐containing molecular design strategy for efficient and mechanically robust OSCs.
- 6 August 2026
- Published by Wiley in Angewandte Chemie
- Vol. 138 (41)
Dynamic Disulfide‐Linked Dimeric Acceptors for High‐Efficiency and Mechanically Robust Organic Solar Cells
The practical application of organic solar cells (OSCs) in wearable electronics requires simultaneous improvements in efficiency, stability, and mechanical robustness. In this study, we developed a disulfide‐linked dimeric acceptor, DY‐SS, by integrating an exchangeable dynamic covalent linkage into the backbone of a photoactive acceptor, representing, to our knowledge, the first photoactive material framework containing exchangeable dynamic covalent linkages. DY‐SS acts as an energetic and morphological regulator, reducing non‐radiative energy loss, modulating crystallization kinetics, and enhancing molecular packing coherence. Consequently, the ternary devices achieve a high PCE of 20.40%, compared with 19.64% for the binary control, accompanied by a 1.62‐fold extension of the T 80 thermal lifetime. In the presence of trace thioctic acid, thermally activated disulfide exchange enables the formation of an adaptive covalent network, which promotes stress dissipation and markedly improves film toughness and yielding a markedly increased crack‐onset strain of 16.07% (3.89‐fold over the binary control) and a 7.54‐fold enhancement in toughness. Notably, the toughened flexible OSCs demonstrate unprecedented mechanical durability, retaining 91.1% of their initial efficiency even after 10 5 bending cycles under the extreme condition of a 1 mm bending radius (vs. 82.1% for the control). This work provides a dynamic‐bond‐containing molecular design strategy for efficient and mechanically robust OSCs.
- 6 August 2026
- Published by Wiley in Angewandte Chemie
- Vol. 138 (41)
Dynamic Disulfide‐Linked Dimeric Acceptors for High‐Efficiency and Mechanically Robust Organic Solar Cells
The practical application of organic solar cells (OSCs) in wearable electronics requires simultaneous improvements in efficiency, stability, and mechanical robustness. In this study, we developed a disulfide‐linked dimeric acceptor, DY‐SS, by integrating an exchangeable dynamic covalent linkage into the backbone of a photoactive acceptor, representing, to our knowledge, the first photoactive material framework containing exchangeable dynamic covalent linkages. DY‐SS acts as an energetic and morphological regulator, reducing non‐radiative energy loss, modulating crystallization kinetics, and enhancing molecular packing coherence. Consequently, the ternary devices achieve a high PCE of 20.40%, compared with 19.64% for the binary control, accompanied by a 1.62‐fold extension of the T 80 thermal lifetime. In the presence of trace thioctic acid, thermally activated disulfide exchange enables the formation of an adaptive covalent network, which promotes stress dissipation and markedly improves film toughness and yielding a markedly increased crack‐onset strain of 16.07% (3.89‐fold over the binary control) and a 7.54‐fold enhancement in toughness. Notably, the toughened flexible OSCs demonstrate unprecedented mechanical durability, retaining 91.1% of their initial efficiency even after 10 5 bending cycles under the extreme condition of a 1 mm bending radius (vs. 82.1% for the control). This work provides a dynamic‐bond‐containing molecular design strategy for efficient and mechanically robust OSCs.
- 20 July 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (29) , 31099-31109
Supramolecular Seeding-Induced Fibrillar Refinement for High Efficiency and Stable Organic Solar Cells
Achieving optimal morphology and long-term stability in organic solar cells (OSCs) remains challenging because the donor–acceptor crystallization sequence is often poorly coordinated during solution processing. Here, we develop a supramolecular crystallization seeding strategy by introducing a hydroxyl-terminated, highly crystalline acceptor (Y–OH) into the D18/L8-BO system. By engineering a hierarchical thermodynamic compatibility gradient (χD18/Y–OH > χL8-BO/Y–OH > χD18/L8-BO), Y–OH becomes interface-active and exhibits an interfacial distribution tendency in the multicomponent film. In situ UV–vis measurements reveal that Y–OH undergoes early stage ordering on a time scale closer to the donor, thereby participating in the initial morphology evolution and steering the subsequent organization of L8-BO into a refined interpenetrating fibrillar network with reduced fibril diameters. This morphology simultaneously promotes efficient exciton harvesting/charge generation and enables balanced charge transport, leading to concurrent enhancements in short-circuit current density (JSC) and fill factor (FF). As a result, the optimized ternary devices deliver a PCE of 20.90% (vs 20.05% for the binary control). Moreover, hydroxyl-enabled supramolecular interactions provide noncovalent anchoring that retards thermally driven morphology relaxation, allowing the devices to retain ≈83% of their initial efficiency after 900 h at 65 °C. This work highlights supramolecular crystallization seeding as an effective design principle for simultaneously improving efficiency and thermal stability in OSCs.
- 20 July 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (29) , 31099-31109
Supramolecular Seeding-Induced Fibrillar Refinement for High Efficiency and Stable Organic Solar Cells
Achieving optimal morphology and long-term stability in organic solar cells (OSCs) remains challenging because the donor–acceptor crystallization sequence is often poorly coordinated during solution processing. Here, we develop a supramolecular crystallization seeding strategy by introducing a hydroxyl-terminated, highly crystalline acceptor (Y–OH) into the D18/L8-BO system. By engineering a hierarchical thermodynamic compatibility gradient (χD18/Y–OH > χL8-BO/Y–OH > χD18/L8-BO), Y–OH becomes interface-active and exhibits an interfacial distribution tendency in the multicomponent film. In situ UV–vis measurements reveal that Y–OH undergoes early stage ordering on a time scale closer to the donor, thereby participating in the initial morphology evolution and steering the subsequent organization of L8-BO into a refined interpenetrating fibrillar network with reduced fibril diameters. This morphology simultaneously promotes efficient exciton harvesting/charge generation and enables balanced charge transport, leading to concurrent enhancements in short-circuit current density (JSC) and fill factor (FF). As a result, the optimized ternary devices deliver a PCE of 20.90% (vs 20.05% for the binary control). Moreover, hydroxyl-enabled supramolecular interactions provide noncovalent anchoring that retards thermally driven morphology relaxation, allowing the devices to retain ≈83% of their initial efficiency after 900 h at 65 °C. This work highlights supramolecular crystallization seeding as an effective design principle for simultaneously improving efficiency and thermal stability in OSCs.
- 26 April 2026
- Published by Wiley in Angewandte Chemie
- Vol. 138 (24)
Twisted Nanoribbon‐Like Electron Acceptor With Suppressed Non‐Radiative Loss and Seed‐Assisted Crystallization for High‐Efficiency Organic Solar Cells
While large π‐conjugated nanoribbons possess highly tunable electronic properties, their potential in high‐performance organic photovoltaics (OPVs) remains largely untapped. Herein, we report a π‐extended nanoribbon‐like electron acceptor, PDIY, featuring a molecular length of 4.85 nm (11 fused rings) and near‐infrared absorption extending to 900 nm. PDIY is engineered with a perylene diimide core fused to dual rylene units and end‐capped with Y‐type acceptor moieties. The rigid conjugated framework effectively suppresses conformational/vibronic relaxation, weakens electron‐phonon coupling, and yields an intrinsically low non‐radiative voltage loss (Δ V nr ) of 0.146 eV, among the lowest values reported to date, thereby enabling higher open‐circuit voltage. Despite its large size, the twisted geometry of PDIY leads to a unique “low crystallinity, strong aggregation” behavior. This allows PDIY to serve as a potent morphology‐directing additive that acts in a manner consistent with heterogeneous nucleation, inducing the formation of robust, large‐diameter fibrillar networks within bulk‐heterojunction blends. Consequently, the integration of PDIY yields a simultaneous enhancement across all photovoltaic parameters, boosting power conversion efficiencies (PCEs) from 19.62% to 20.57%. This work establishes twisted nanoribbon‐like acceptor as a versatile molecular platform for the dual regulation of excited‐state dynamics and active‐layer morphology in next‐generation OSCs.
- 26 April 2026
- Published by Wiley in Angewandte Chemie
- Vol. 138 (24)
Twisted Nanoribbon‐Like Electron Acceptor With Suppressed Non‐Radiative Loss and Seed‐Assisted Crystallization for High‐Efficiency Organic Solar Cells
While large π‐conjugated nanoribbons possess highly tunable electronic properties, their potential in high‐performance organic photovoltaics (OPVs) remains largely untapped. Herein, we report a π‐extended nanoribbon‐like electron acceptor, PDIY, featuring a molecular length of 4.85 nm (11 fused rings) and near‐infrared absorption extending to 900 nm. PDIY is engineered with a perylene diimide core fused to dual rylene units and end‐capped with Y‐type acceptor moieties. The rigid conjugated framework effectively suppresses conformational/vibronic relaxation, weakens electron‐phonon coupling, and yields an intrinsically low non‐radiative voltage loss (Δ V nr ) of 0.146 eV, among the lowest values reported to date, thereby enabling higher open‐circuit voltage. Despite its large size, the twisted geometry of PDIY leads to a unique “low crystallinity, strong aggregation” behavior. This allows PDIY to serve as a potent morphology‐directing additive that acts in a manner consistent with heterogeneous nucleation, inducing the formation of robust, large‐diameter fibrillar networks within bulk‐heterojunction blends. Consequently, the integration of PDIY yields a simultaneous enhancement across all photovoltaic parameters, boosting power conversion efficiencies (PCEs) from 19.62% to 20.57%. This work establishes twisted nanoribbon‐like acceptor as a versatile molecular platform for the dual regulation of excited‐state dynamics and active‐layer morphology in next‐generation OSCs.
- 25 April 2026
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 65 (24) , e9572636
Twisted Nanoribbon‐Like Electron Acceptor With Suppressed Non‐Radiative Loss and Seed‐Assisted Crystallization for High‐Efficiency Organic Solar Cells
While large π‐conjugated nanoribbons possess highly tunable electronic properties, their potential in high‐performance organic photovoltaics (OPVs) remains largely untapped. Herein, we report a π‐extended nanoribbon‐like electron acceptor, PDIY, featuring a molecular length of 4.85 nm (11 fused rings) and near‐infrared absorption extending to 900 nm. PDIY is engineered with a perylene diimide core fused to dual rylene units and end‐capped with Y‐type acceptor moieties. The rigid conjugated framework effectively suppresses conformational/vibronic relaxation, weakens electron‐phonon coupling, and yields an intrinsically low non‐radiative voltage loss (Δ V nr ) of 0.146 eV, among the lowest values reported to date, thereby enabling higher open‐circuit voltage. Despite its large size, the twisted geometry of PDIY leads to a unique “low crystallinity, strong aggregation” behavior. This allows PDIY to serve as a potent morphology‐directing additive that acts in a manner consistent with heterogeneous nucleation, inducing the formation of robust, large‐diameter fibrillar networks within bulk‐heterojunction blends. Consequently, the integration of PDIY yields a simultaneous enhancement across all photovoltaic parameters, boosting power conversion efficiencies (PCEs) from 19.62% to 20.57%. This work establishes twisted nanoribbon‐like acceptor as a versatile molecular platform for the dual regulation of excited‐state dynamics and active‐layer morphology in next‐generation OSCs.
- 25 April 2026
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 65 (24) , e9572636
Twisted Nanoribbon‐Like Electron Acceptor With Suppressed Non‐Radiative Loss and Seed‐Assisted Crystallization for High‐Efficiency Organic Solar Cells
While large π‐conjugated nanoribbons possess highly tunable electronic properties, their potential in high‐performance organic photovoltaics (OPVs) remains largely untapped. Herein, we report a π‐extended nanoribbon‐like electron acceptor, PDIY, featuring a molecular length of 4.85 nm (11 fused rings) and near‐infrared absorption extending to 900 nm. PDIY is engineered with a perylene diimide core fused to dual rylene units and end‐capped with Y‐type acceptor moieties. The rigid conjugated framework effectively suppresses conformational/vibronic relaxation, weakens electron‐phonon coupling, and yields an intrinsically low non‐radiative voltage loss (Δ V nr ) of 0.146 eV, among the lowest values reported to date, thereby enabling higher open‐circuit voltage. Despite its large size, the twisted geometry of PDIY leads to a unique “low crystallinity, strong aggregation” behavior. This allows PDIY to serve as a potent morphology‐directing additive that acts in a manner consistent with heterogeneous nucleation, inducing the formation of robust, large‐diameter fibrillar networks within bulk‐heterojunction blends. Consequently, the integration of PDIY yields a simultaneous enhancement across all photovoltaic parameters, boosting power conversion efficiencies (PCEs) from 19.62% to 20.57%. This work establishes twisted nanoribbon‐like acceptor as a versatile molecular platform for the dual regulation of excited‐state dynamics and active‐layer morphology in next‐generation OSCs.
- 4 February 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (6) , 10128-10137
Hydroquinone Isomer-Directed n-Doping Modulation of MoO x Enables Thickness-Insensitive Hole Transport Layers for High-Efficiency Organic Solar Cells
Developing solution-processed, thickness-insensitive hole-transporting layers (HTLs) remains a key challenge for the scalable fabrication of organic solar cells (OSCs). Herein, three dihydroxybenzene isomers─catechol (CT), resorcinol (RS), and hydroquinone (HQ)─were employed as mild reducing agents to synthesize highly conductive MoOx HTLs, enabling a systematic investigation of the structure-property-performance relationship linking the reducing agent's molecular structure, the resulting HTL functionality, and the final OSC device performance. Systematic characterization revealed a clear hierarchy in reduction capability (HQ > CT > RS), consistent with their molecular structures. Among the three, HQ-modified MoOx exhibits the highest conductivity, excellent optical transparency, smooth surface morphology, and well-preserved high work function. When incorporated as HTLs, OSCs based on 5% HQ:MoOx deliver outstanding performance with power conversion efficiencies (PCEs) of 18.52% (PM6:L8-BO) and 19.80% (D18:L8-BO:BTP-eC9)─the highest reported values for single-junction OSCs employing solution-processed MoOx. Moreover, the HQ:MoOx-based devices show superior thermal stability and remarkable thickness tolerance, maintaining over 82% of their peak efficiency even at a 150 nm HTL thickness, whereas neat MoOx devices degrade sharply to 0.72%. This work elucidates a clear structure-property-device performance correlation and demonstrates HQ-modulated MoOx as a scalable, robust HTL platform for high-efficiency and thickness-tolerant OSCs.
- 4 February 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (6) , 10128-10137
Hydroquinone Isomer-Directed n-Doping Modulation of MoO x Enables Thickness-Insensitive Hole Transport Layers for High-Efficiency Organic Solar Cells
Developing solution-processed, thickness-insensitive hole-transporting layers (HTLs) remains a key challenge for the scalable fabrication of organic solar cells (OSCs). Herein, three dihydroxybenzene isomers─catechol (CT), resorcinol (RS), and hydroquinone (HQ)─were employed as mild reducing agents to synthesize highly conductive MoOx HTLs, enabling a systematic investigation of the structure-property-performance relationship linking the reducing agent's molecular structure, the resulting HTL functionality, and the final OSC device performance. Systematic characterization revealed a clear hierarchy in reduction capability (HQ > CT > RS), consistent with their molecular structures. Among the three, HQ-modified MoOx exhibits the highest conductivity, excellent optical transparency, smooth surface morphology, and well-preserved high work function. When incorporated as HTLs, OSCs based on 5% HQ:MoOx deliver outstanding performance with power conversion efficiencies (PCEs) of 18.52% (PM6:L8-BO) and 19.80% (D18:L8-BO:BTP-eC9)─the highest reported values for single-junction OSCs employing solution-processed MoOx. Moreover, the HQ:MoOx-based devices show superior thermal stability and remarkable thickness tolerance, maintaining over 82% of their peak efficiency even at a 150 nm HTL thickness, whereas neat MoOx devices degrade sharply to 0.72%. This work elucidates a clear structure-property-device performance correlation and demonstrates HQ-modulated MoOx as a scalable, robust HTL platform for high-efficiency and thickness-tolerant OSCs.